Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

When qcom_smd is a loadable module and wcnss-pil is built-in,
we get a link error:

drivers/remoteproc/qcom_wcnss_pil.o: In function `wcnss_smd_remove':
qcom_wcnss_iris.c:(.text.wcnss_smd_remove+0x10): undefined reference to `qcom_smd_unregister_edge'
drivers/remoteproc/qcom_wcnss_pil.o: In function `wcnss_smd_probe':
qcom_wcnss_iris.c:(.text.wcnss_smd_probe+0x12): undefined reference to `qcom_smd_register_edge'

This adds a Kconfig dependency to avoid this. We can still allow
build-testing with SMD disabled.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Merge branch 'topic/st_fdma' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/slave-dma into rproc-next

* 'topic/st_fdma' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/slave-dma:
  dmaengine: st_fdma: Revert: "Revert: Update st_fdma to 'depends on REMOTEPROC'"

This reverts commit 6d066389 "(dmaengine:
st_fdma: Revert: Update st_fdma to 'depends on REMOTEPROC')" as the commit
it reverted was fine.
Reported-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>

Add xo clock support required to boot up Qualcomm ADSP processor.
The ADSP remoteproc driver keeps xo clock enabled until the
driver receives "handover" irq, in order to allow ADSP processor
to vote for xo clock with rpm.
Signed-off-by: Sarangdhar Joshi <spjoshi@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

The newly added driver tries to 'select' a symbol that it has an
implicit dependency on, which confuses Kconfig:

subsection "Kconfig recursive dependency limitations"
drivers/remoteproc/Kconfig:3:	symbol REMOTEPROC is selected by QCOM_ADSP_PIL

As REMOTEPROC is itself user-visible, we clearly should not select
it from a driver, removing the line fixes the problem.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Merge branch 'topic/st_fdma' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/slave-dma into rproc-next

The Qualcomm ADSP Peripheral Image Loader is used on a variety of
different Qualcomm platforms for loading firmware into and controlling
the Hexagon based ADSP.
Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

This document defines the binding for a component that loads firmware
and control the life cycle of the Qualcomm ADSP Hexagon core.
Acked-by: Rob Herring <robh@kernel.org>
Cc: Sarangdhar Joshi <spjoshi@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

The tie between the main WCNSS driver and the IRIS driver causes a
circular dependency between the two modules. Neither part makes sense to
have on their own so lets merge them into one module.

For the sake of picking up the clock and regulator resources described
in the iris of_node we need an associated struct device. But, to keep
the size of the patch down we continue to represent the IRIS part as its
own platform_driver, within the same module, rather than setting up a
dummy device.

Fixes: aed361ad ("remoteproc: qcom: Introduce WCNSS peripheral image loader")
Reported-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

As all vdev resources are allocated before we boot the remote processor
we no longer need to support modifying the resource table while the
remote is running.

This saves us from the table_ptr dance, but more importantly allow the
remote processor to enable security lock down of the loaded table memory
region.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

The vdev handler is now just another resource allocator, so handle all
resource types in a single pass.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Vrings are now allocated as we parse the resource table, before we
boot the rproc or register any virtio devices, so it's safe to bump
max_notifyid as part of this process.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Represent the virtio device part of the vdev resources as remoteproc
subdevices to finalize the decoupling of the virtio resource and device
handling.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Tie the vdev (and hence vring) life cycle to the resource parsing and
resource cleanup operations, allowing us to safely register and
unregister virtio devices on the go.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Instead of having the vrings being allocated and freed as they are
requested by the virtio device tie their life cycle to the vdev
resource. This allows us to decouple the vdev resource management from
the virtio device management.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

No functional change
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Allow the associated smd edge to be described within the wcnss
remoteproc node. This creates a bond between the remoteproc and the
associated smd channels and devices, showing the interaction between the
two parts and provides both a natural reference to the other.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>

Allow the wcnss smd edge to be described as a child of the wcnss
remoteproc node and make the edge life cycle follow the running state of
the remoteproc.

This bond is necessary to clean up the smd state when the remote
processor is suddenly removed, and in some cases even when it shut down
in a controlled fasion.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

The edge registration functions is to be used from a remoteproc driver
to register and unregister an edge as the remote processor comes and
goes.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

This reverts commit 184e1396 ("dmaengine:
st_fdma: Update st_fdma to 'depends on REMOTEPROC'") due to objection from
Bjorn.
Signed-off-by: Vinod Koul <vinod.koul@intel.com>

A subdevice is an abstract entity that can be used to tie actions to the
booting and shutting down of a remote processor. The subdevice object is
expected to be embedded in concrete implementations, allowing for a
variety of use cases to be implemented.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

During randconfig builds you can get the following warning
"warning: (ST_FDMA) selects ST_SLIM_REMOTEPROC which has unmet direct
 dependencies (REMOTEPROC)"

randconfig builds should always build without any warnings so
update fdma to depend on REMOTEPROC so this can not happen.
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Reported-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>

Fix to return a negative error code from the st_rproc_state() error
handling case instead of 0, as done elsewhere in this function.

Fixes: 63edb031 ("remoteproc: Supply controller driver for ST's Remote Processors")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Since there is now an always available state file in sysfs with the same
function as this one in debugfs, remove the redundant entry.
Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

This patch adds a sysfs interface to rproc allowing the firmware name
and processor state to be changed dynamically.

State was previously available in debugfs, and is replicated here. The
firmware file allows retrieval of the running firmware name, and a new
one to be specified at run time, so long as the remote processor has
been stopped.
Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

In case of error, the function st_slim_rproc_alloc() returns ERR_PTR()
and never returns NULL. The NULL test in the return value check should
be replaced with IS_ERR().
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>

The newly added st_fdma driver introduces a build warning for
allmodconfig when we add '-Wmaybe-uninitialized':

drivers/dma/st_fdma.c: In function 'st_fdma_probe':
drivers/dma/st_fdma.c:777:5: error: 'ret' may be used uninitialized in this function [-Werror=maybe-uninitialized]

The warning is correct, though this can't happen in practice
as the check is redundant (we don't get to this function if
the pointer is NULL). Even if the function were called with a
NULL of_node, the check is not needed because of_property_read_u32
can deal with a NULL argument by returning an error.

Removing the unnecessary code simplifies the function and avoids
the condition that we get the warning for.

Fixes: 6b4cd727 ("dmaengine: st_fdma: Add STMicroelectronics FDMA engine driver support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>

If the driver is built as a module, autoload won't work because the module
alias information is not filled. So user-space can't match the registered
device with the corresponding module.

Export the module alias information using the MODULE_DEVICE_TABLE() macro.

Before this patch:

$ modinfo drivers/remoteproc/qcom_wcnss_iris.ko | grep alias
$

After this patch:

$ modinfo drivers/remoteproc/qcom_wcnss_iris.ko | grep alias
alias:          of:N*T*Cqcom,wcn3680C*
alias:          of:N*T*Cqcom,wcn3680
alias:          of:N*T*Cqcom,wcn3660C*
alias:          of:N*T*Cqcom,wcn3660
alias:          of:N*T*Cqcom,wcn3620C*
alias:          of:N*T*Cqcom,wcn3620
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

If the driver is built as a module, autoload won't work because the module
alias information is not filled. So user-space can't match the registered
device with the corresponding module.

Export the module alias information using the MODULE_DEVICE_TABLE() macro.

Before this patch:

$ modinfo drivers/remoteproc/qcom_wcnss.ko | grep alias
$

After this patch:

$ modinfo drivers/remoteproc/qcom_wcnss.ko | grep alias
alias:          of:N*T*Cqcom,pronto-v2-pilC*
alias:          of:N*T*Cqcom,pronto-v2-pil
alias:          of:N*T*Cqcom,pronto-v1-pilC*
alias:          of:N*T*Cqcom,pronto-v1-pil
alias:          of:N*T*Cqcom,riva-pilC*
alias:          of:N*T*Cqcom,riva-pil
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

If the driver is built as a module, autoload won't work because the module
alias information is not filled. So user-space can't match the registered
device with the corresponding module.

Export the module alias information using the MODULE_DEVICE_TABLE() macro.

Before this patch:

$ modinfo drivers/remoteproc/qcom_q6v5_pil.ko | grep alias
$

After this patch:

$ modinfo drivers/remoteproc/qcom_q6v5_pil.ko | grep alias
alias:          of:N*T*Cqcom,q6v5-pilC*
alias:          of:N*T*Cqcom,q6v5-pil
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Storage of the firmware name was inconsistent, either storing a pointer
to a name stored with unknown ownership, or a variable length tacked
onto the end of the struct proc allocated in rproc_alloc.

In preparation for allowing the firmware of an already allocated struct
rproc to be changed, instead always keep a locally maintained copy of
the firmware name.
Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

This patch enables the STi ALSA drivers found on STi platforms
as well as the simple-card driver which is a dependency to have
working sound.
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Cc: arnaud.pouliquen@st.com
Cc: broonie@kernel.org
Signed-off-by: Vinod Koul <vinod.koul@intel.com>

This DMA controller is found on all STi chipsets.
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>

The st231 remote coprocessors are found on all STi chipsets.
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>

Now that remoteproc core is selectable it needs to be enabled
in the multi_v7 build.
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>

This patch adds the FDMA driver files to the STi
section of the maintainers file.
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>

This patch adds support for the Flexible Direct Memory Access (FDMA) core
driver. The FDMA is a slim core CPU with a dedicated firmware.
It is a general purpose DMA controller capable of supporting 16
independent DMA channels. Data moves maybe from memory to memory
or between memory and paced latency critical real time targets and it
is found on al STi based chipsets.
Signed-off-by: Ludovic Barre <ludovic.barre@st.com>
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>

This header file will also be used by the dma xbar driver in the
future.
Signed-off-by: Ludovic Barre <ludovic.barre@st.com>
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>

This patch adds the DT binding documentation for the FDMA constroller
found on STi based chipsets from STMicroelectronics.
Signed-off-by: Ludovic Barre <ludovic.barre@st.com>
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>