Pull landlock update from Mickaël Salaün:
 "Improve user space documentation"

* tag 'landlock-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
  landlock: Clarify documentation for the LANDLOCK_ACCESS_FS_REFER right

Pull tomoyo update from Tetsuo Handa:
 "One cleanup patch from Vlastimil Babka"

* tag 'tomoyo-pr-20230424' of git://git.osdn.net/gitroot/tomoyo/tomoyo-test1:
  tomoyo: replace tomoyo_round2() with kmalloc_size_roundup()

Pull lsm updates from Paul Moore:

 - Move the LSM hook comment blocks into security/security.c

   For many years the LSM hook comment blocks were located in a very odd
   place, include/linux/lsm_hooks.h, where they lived on their own,
   disconnected from both the function prototypes and definitions.

   In keeping with current kernel conventions, this moves all of these
   comment blocks to the top of the function definitions, transforming
   them into the kdoc format in the process. This should make it much
   easier to maintain these comments, which are the main source of LSM
   hook documentation.

   For the most part the comment contents were left as-is, although some
   glaring errors were corrected. Expect additional edits in the future
   as we slowly update and correct the comment blocks.

   This is the bulk of the diffstat.

 - Introduce LSM_ORDER_LAST

   Similar to how LSM_ORDER_FIRST is used to specify LSMs which should
   be ordered before "normal" LSMs, the LSM_ORDER_LAST is used to
   specify LSMs which should be ordered after "normal" LSMs.

   This is one of the prerequisites for transitioning IMA/EVM to a
   proper LSM.

 - Remove the security_old_inode_init_security() hook

   The security_old_inode_init_security() LSM hook only allows for a
   single xattr which is problematic both for LSM stacking and the
   IMA/EVM-as-a-LSM effort. This finishes the conversion over to the
   security_inode_init_security() hook and removes the single-xattr LSM
   hook.

 - Fix a reiserfs problem with security xattrs

   During the security_old_inode_init_security() removal work it became
   clear that reiserfs wasn't handling security xattrs properly so we
   fixed it.

* tag 'lsm-pr-20230420' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm: (32 commits)
  reiserfs: Add security prefix to xattr name in reiserfs_security_write()
  security: Remove security_old_inode_init_security()
  ocfs2: Switch to security_inode_init_security()
  reiserfs: Switch to security_inode_init_security()
  security: Remove integrity from the LSM list in Kconfig
  Revert "integrity: double check iint_cache was initialized"
  security: Introduce LSM_ORDER_LAST and set it for the integrity LSM
  device_cgroup: Fix typo in devcgroup_css_alloc description
  lsm: fix a badly named parameter in security_get_getsecurity()
  lsm: fix doc warnings in the LSM hook comments
  lsm: styling fixes to security/security.c
  lsm: move the remaining LSM hook comments to security/security.c
  lsm: move the io_uring hook comments to security/security.c
  lsm: move the perf hook comments to security/security.c
  lsm: move the bpf hook comments to security/security.c
  lsm: move the audit hook comments to security/security.c
  lsm: move the binder hook comments to security/security.c
  lsm: move the sysv hook comments to security/security.c
  lsm: move the key hook comments to security/security.c
  lsm: move the xfrm hook comments to security/security.c
  ...

Pull selinux updates from Paul Moore:

 - Stop passing the 'selinux_state' pointers as function arguments

   As discussed during the end of the last development cycle, passing a
   selinux_state pointer through the SELinux code has a noticeable
   impact on performance, and with the current code it is not strictly
   necessary.

   This simplifies things by referring directly to the single
   selinux_state global variable which should help improve SELinux
   performance.

 - Uninline the unlikely portions of avc_has_perm_noaudit()

   This change was also based on a discussion from the last development
   cycle, and is heavily based on an initial proof of concept patch from
   you. The core issue was that avc_has_perm_noaudit() was not able to
   be inlined, as intended, due to its size. We solved this issue by
   extracting the less frequently hit portions of avc_has_perm_noaudit()
   into a separate function, reducing the size of avc_has_perm_noaudit()
   to the point where the compiler began inlining the function. We also
   took the opportunity to clean up some ugly RCU locking in the code
   that became uglier with the change.

 - Remove the runtime disable functionality

   After several years of work by the userspace and distro folks, we are
   finally in a place where we feel comfortable removing the runtime
   disable functionality which we initially deprecated at the start of
   2020.

   There is plenty of information in the kernel's deprecation (now
   removal) notice, but the main motivation was to be able to safely
   mark the LSM hook structures as '__ro_after_init'.

   LWN also wrote a good summary of the deprecation this morning which
   offers a more detailed history:

        https://lwn.net/SubscriberLink/927463/dcfa0d4ed2872f03

 - Remove the checkreqprot functionality

   The original checkreqprot deprecation notice stated that the removal
   would happen no sooner than June 2021, which means this falls hard
   into the "better late than never" bucket.

   The Kconfig and deprecation notice has more detail on this setting,
   but the basic idea is that we want to ensure that the SELinux policy
   allows for the memory protections actually applied by the kernel, and
   not those requested by the process.

   While we haven't found anyone running a supported distro that is
   affected by this deprecation/removal, anyone who is affected would
   only need to update their policy to reflect the reality of their
   applications' mapping protections.

 - Minor Makefile improvements

   Some minor Makefile improvements to correct some dependency issues
   likely only ever seen by SELinux developers. I expect we will have at
   least one more tweak to the Makefile during the next merge window,
   but it didn't quite make the cutoff this time around.

* tag 'selinux-pr-20230420' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
  selinux: ensure av_permissions.h is built when needed
  selinux: fix Makefile dependencies of flask.h
  selinux: stop returning node from avc_insert()
  selinux: clean up dead code after removing runtime disable
  selinux: update the file list in MAINTAINERS
  selinux: remove the runtime disable functionality
  selinux: remove the 'checkreqprot' functionality
  selinux: stop passing selinux_state pointers and their offspring
  selinux: uninline unlikely parts of avc_has_perm_noaudit()

Merge my x86 user copy updates branch.

This cleans up a lot of our x86 memory copy code, particularly for user
accesses.  I've been pushing for microarchitectural support for good
memory copying and clearing for a long while, and it's been visible in
how the kernel has aggressively used 'rep movs' and 'rep stos' whenever
possible.

And that micro-architectural support has been improving over the years,
to the point where on modern CPU's the best option for a memory copy
that would become a function call (as opposed to being something that
can just be turned into individual 'mov' instructions) is now to inline
the string instruction sequence instead.

However, that only makes sense when we have the modern markers for this:
the x86 FSRM and FSRS capabilities ("Fast Short REP MOVS/STOS").

So this cleans up a lot of our historical code, gets rid of the legacy
marker use ("REP_GOOD" and "ERMS") from the memcpy/memset cases, and
replaces it with that modern reality.  Note that REP_GOOD and ERMS end
up still being used by the known large cases (ie page copyin gand
clearing).

The reason much of this ends up being about user memory accesses is that
the normal in-kernel cases are done by the compiler (__builtin_memcpy()
and __builtin_memset()) and getting to the point where we can use our
instruction rewriting to inline those to be string instructions will
need some compiler support.

In contrast, the user accessor functions are all entirely controlled by
the kernel code, so we can change those arbitrarily.

Thanks to Borislav Petkov for feedback on the series, and Jens testing
some of this on micro-architectures I didn't personally have access to.

* x86-rep-insns:
  x86: rewrite '__copy_user_nocache' function
  x86: remove 'zerorest' argument from __copy_user_nocache()
  x86: set FSRS automatically on AMD CPUs that have FSRM
  x86: improve on the non-rep 'copy_user' function
  x86: improve on the non-rep 'clear_user' function
  x86: inline the 'rep movs' in user copies for the FSRM case
  x86: move stac/clac from user copy routines into callers
  x86: don't use REP_GOOD or ERMS for user memory clearing
  x86: don't use REP_GOOD or ERMS for user memory copies
  x86: don't use REP_GOOD or ERMS for small memory clearing
  x86: don't use REP_GOOD or ERMS for small memory copies

Use the same pattern as the compat version of this code does: instead of
copying the whole array to a kernel buffer and then having a separate
phase of verifying it, just do it one entry at a time, verifying as you
go.

On Jens' /dev/zero readv() test this improves performance by ~6%.

[ This was obviously triggered by Jens' ITER_UBUF updates series ]
Reported-and-tested-by: Jens Axboe <axboe@kernel.dk>
Link: https://lore.kernel.org/all/de35d11d-bce7-e976-7372-1f2caf417103@kernel.dk/Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull ITER_UBUF updates from Jens Axboe:
 "This turns singe vector imports into ITER_UBUF, rather than
  ITER_IOVEC.

  The former is more trivial to iterate and advance, and hence a bit
  more efficient. From some very unscientific testing, ~60% of all iovec
  imports are single vector"

* tag 'iter-ubuf.2-2023-04-21' of git://git.kernel.dk/linux:
  iov_iter: Mark copy_compat_iovec_from_user() noinline
  iov_iter: import single vector iovecs as ITER_UBUF
  iov_iter: convert import_single_range() to ITER_UBUF
  iov_iter: overlay struct iovec and ubuf/len
  iov_iter: set nr_segs = 1 for ITER_UBUF
  iov_iter: remove iov_iter_iovec()
  iov_iter: add iter_iov_addr() and iter_iov_len() helpers
  ALSA: pcm: check for user backed iterator, not specific iterator type
  IB/qib: check for user backed iterator, not specific iterator type
  IB/hfi1: check for user backed iterator, not specific iterator type
  iov_iter: add iter_iovec() helper
  block: ensure bio_alloc_map_data() deals with ITER_UBUF correctly

Pull ARM development updates from Russell King:
 "Four changes for v6.4:

   - simplify the path to the top vmlinux

   - three patches to fix vfp with instrumentation enabled (eg lockdep)"

* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: 9294/2: vfp: Fix broken softirq handling with instrumentation enabled
  ARM: 9293/1: vfp: Pass successful return address via register R3
  ARM: 9292/1: vfp: Pass thread_info pointer to vfp_support_entry
  ARM: 9291/1: decompressor: simplify the path to the top vmlinux

Intel compiler support has already been completely removed in commit
95207db8 ("Remove Intel compiler support").  However, it appears
that there is still some ICC-related code in scripts/cc-version.sh.
There is no harm in leaving the code as it is, but removing the dead
code makes the codebase a bit cleaner.

Hopefully all ICC-related stuff in the build scripts will be removed
after this commit, given the grep output as below:

	(linux/scripts) $ grep -i -w -R 'icc'
	cc-version.sh:ICC)
	cc-version.sh:	min_version=$($min_tool_version icc)
	dtc/include-prefixes/arm64/qcom/sm6350.dtsi:#include <dt-bindings/interconnect/qcom,icc.h>

Fixes: 95207db8 ("Remove Intel compiler support")
Signed-off-by: Ruihan Li <lrh2000@pku.edu.cn>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

We started disabling '-Warray-bounds' for gcc-12 originally on s390,
because it resulted in some warnings that weren't realistically fixable
(commit 8b202ee2: "s390: disable -Warray-bounds").

That s390-specific issue was then found to be less common elsewhere, but
generic (see f0be87c4: "gcc-12: disable '-Warray-bounds' universally
for now"), and then later expanded the version check was expanded to
gcc-11 (5a41237a: "gcc: disable -Warray-bounds for gcc-11 too").

And it turns out that I was much too optimistic in thinking that it's
all going to go away, and here we are with gcc-13 showing all the same
issues.  So instead of expanding this one version at a time, let's just
disable it for gcc-11+, and put an end limit to it only when we actually
find a solution.

Yes, I'm sure some of this is because the kernel just does odd things
(like our "container_of()" use, but also knowingly playing games with
things like linker tables and array layouts).

And yes, some of the warnings are likely signs of real bugs, but when
there are hundreds of false positives, that doesn't really help.

Oh well.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'kbuild-fixes-v6.3-4' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - Fix the prefix in the kernel source tarball

 - Fix a typo in the copyright file in Debian package

* tag 'kbuild-fixes-v6.3-4' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kbuild: use proper prefix for tarballs to fix rpm-pkg build error
  kbuild: deb-pkg: Fix a spell typo in mkdebian script

Pull irq fix from Borislav Petkov:

 - Remove an over-zealous sanity check of the array of MSI-X vectors to
   be allocated for a device

* tag 'irq_urgent_for_v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  PCI/MSI: Remove over-zealous hardware size check in pci_msix_validate_entries()

Pull x86 fix from Borislav Petkov

 - Fix for older binutils which do not support C-syntax constant
   suffixes

* tag 'x86_urgent_for_v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/alternatives: Do not use integer constant suffixes in inline asm

Pull input fixes from Dmitry Torokhov:

 - a check in pegasus-notetaker driver to validate the type of pipe when
   probing a new device

 - a fix for Cypress touch controller to correctly parse maximum number
   of touches.

* tag 'input-for-v6.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: cyttsp5 - fix sensing configuration data structure
  Input: pegasus-notetaker - check pipe type when probing

Since commit f8d94c4e ("kbuild: do not create intermediate *.tar
for source tarballs"), 'make rpm-pkg' fails because the prefix of the
source tarball is 'linux.tar/' instead of 'linux/'. $(basename $@)
strips only '.gz' from the filename linux.tar.gz.

You need to strip two suffixes from compressed tarballs and one suffix
from uncompressed tarballs (for example 'perf-6.3.0.tar' generated by
'make perf-tar-src-pkg').

One tricky fix might be --prefix=$(firstword $(subst .tar, ,$@))/
but I think it is better to hard-code the prefix.

Fixes: f8d94c4e ("kbuild: do not create intermediate *.tar for source tarballs")
Reported-by: Jiwei Sun <sunjw10@lenovo.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>

Signed-off-by: Woody Suwalski <terraluna977@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Pull MIPS fix from Thomas Bogendoerfer:
 "Fix for link errors"

* tag 'mips-fixes_6.3_2' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
  MIPS: Define RUNTIME_DISCARD_EXIT in LD script

Pull kvm fixes from Paolo Bonzini:
 "Two serious ARM fixes:

   - Plug a buffer overflow due to the use of the user-provided register
     width for firmware regs. Outright reject accesses where the user
     register width does not match the kernel representation.

   - Protect non-atomic RMW operations on vCPU flags against preemption,
     as an update to the flags by an intervening preemption could be
     lost"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: arm64: Fix buffer overflow in kvm_arm_set_fw_reg()
  KVM: arm64: Make vcpu flag updates non-preemptible

Pull cifs fixes from Steve French:
 "Three small smb3 client fixes:

   - two important fixes for unbuffered read regression with the
     iov_iter changes (e.g. read soon after mount in some multichannel
     scenarios)

   - DFS prefix path fix (also for stable)"

* tag '6.3-rc7-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: Reapply lost fix from commit 30b2b219
  cifs: Fix unbuffered read
  cifs: avoid dup prefix path in dfs_get_automount_devname()

Merge tag 'kvmarm-fixes-6.3-4' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD

KVM/arm64 fixes for 6.3, part #4

 - Plug a buffer overflow due to the use of the user-provided register
   width for firmware regs. Outright reject accesses where the
   user register width does not match the kernel representation.

 - Protect non-atomic RMW operations on vCPU flags against preemption,
   as an update to the flags by an intervening preemption could be lost.

MIPS's exit sections are discarded at runtime as well.

Fixes link error:
`.exit.text' referenced in section `__jump_table' of fs/fuse/inode.o:
defined in discarded section `.exit.text' of fs/fuse/inode.o

Fixes: 99cb0d91 ("arch: fix broken BuildID for arm64 and riscv")
Reported-by: "kernelci.org bot" <bot@kernelci.org>
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

This reverts commit 5c62d5aa.

This broke wake-on-lan for multiple people, and for much too long.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=217069
Link: https://lore.kernel.org/all/754225a2-95a9-2c36-1886-7da1a78308c2@loongson.cn/
Link: https://github.com/acpica/acpica/pull/866
Cc: Rafael J. Wysocki <rafael@kernel.org>
Cc: Jianmin Lv <lvjianmin@loongson.cn>
Cc: Huacai Chen <chenhuacai@loongson.cn>
Cc: Bob Moore <robert.moore@intel.com>
Cc: stable@kernel.org # 6.2
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull btrfs fixes from David Sterba:
 "Two patches fixing the problem with aync discard.

  The default settings had a low IOPS limit and processing a large batch
  to discard would take a long time. On laptops this can cause increased
  power consumption due to disk activity.

  As async discard has been on by default since 6.2 this likely affects
  a lot of users.

  Summary:

   - increase the default IOPS limit 10x which reportedly helped

   - setting the sysfs IOPS value to 0 now does not throttle anymore
     allowing the discards to be processed at full speed. Previously
     there was an arbitrary 6 hour target for processing the pending
     batch"

* tag 'for-6.3-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: reinterpret async discard iops_limit=0 as no delay
  btrfs: set default discard iops_limit to 1000

Pull block fix from Jens Axboe:
 "Just a single revert of a patch from the 6.3 series"

* tag 'block-6.3-2023-04-21' of git://git.kernel.dk/linux:
  Revert "block: Merge bio before checking ->cached_rq"

Pull char/misc driver fixes from Greg KH:
 "Here are some last-minute tiny driver fixes for 6.3-final. They
  include fixes for some fpga and iio drivers:

   - fpga bridge driver fix

   - fpga dfl error reporting fix

   - fpga m10bmc driver fix

   - fpga xilinx driver fix

   - iio light driver fix

   - iio dac fwhandle leak fix

   - iio adc driver fix

  All of these have been in linux-next for a few weeks with no reported
  problems"

* tag 'char-misc-6.3-final' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  iio: light: tsl2772: fix reading proximity-diodes from device tree
  fpga: bridge: properly initialize bridge device before populating children
  iio: dac: ad5755: Add missing fwnode_handle_put()
  iio: adc: at91-sama5d2_adc: fix an error code in at91_adc_allocate_trigger()
  fpga: xilinx-pr-decoupler: Use readl wrapper instead of pure readl
  fpga: dfl-pci: Drop redundant pci_enable_pcie_error_reporting()
  fpga: m10bmc-sec: Fix rsu_send_data() to return FW_UPLOAD_ERR_HW_ERROR

Pull gpio fixes from Bartosz Golaszewski:

 - use raw_spinlocks in regmaps that are used in interrupt context in
   gpio-104-idi-48 and gpio-104-dio-48e

* tag 'gpio-fixes-for-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
  gpio: 104-idi-48: Enable use_raw_spinlock for idi48_regmap_config
  gpio: 104-dio-48e: Enable use_raw_spinlock for dio48e_regmap_config

Pull sound fixes from Takashi Iwai:
 "Just a few fixes: all small and device-specific (ASoC FSL, SOF, and
  HD-audio quirks), should be safe to apply at the last minute"

* tag 'sound-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda/realtek: fix mute/micmute LEDs for a HP ProBook
  ASoC: fsl_asrc_dma: fix potential null-ptr-deref
  ASoC: fsl_sai: Fix pins setting for i.MX8QM platform
  ALSA: hda/realtek: Remove specific patch for Dell Precision 3260
  ASoC: max98373: change power down sequence for smart amp
  ASoC: SOF: pm: Tear down pipelines only if DSP was active
  ASoC: SOF: ipc4-topology: Clarify bind failure caused by missing fw_module

It seems there is a misprint in the check of strdup() return code that
can lead to NULL pointer dereference.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Fixes: 4520c6a4 ("X.509: Add simple ASN.1 grammar compiler")
Signed-off-by: Ekaterina Orlova <vorobushek.ok@gmail.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jarkko Sakkinen <jarkko@kernel.org>
Cc: keyrings@vger.kernel.org
Cc: linux-kbuild@vger.kernel.org
Link: https://lore.kernel.org/r/20230315172130.140-1-vorobushek.ok@gmail.com/Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull drm fixes from Dave Airlie:
 "This is the regular and hopefully last round of fixes for 6.3.

  Pretty small, a few amdgpu, one i915, one nouveau, one rockchip and
  one gpu scheduler fix:

  nouveau:
   - fix dma-resv timeout

  rockchip:
   - fix suspend/resume

  sched:
   - fix timeout handling

  i915:
   - Fix fast wake AUX sync len

  amdgpu:
   - GPU reset fix
   - DCN 3.1.5 line buffer fix
   - Display fix for single channel memory configs
   - Fix a possible divide by 0"

* tag 'drm-fixes-2023-04-21' of git://anongit.freedesktop.org/drm/drm:
  drm/amd/display: fix a divided-by-zero error
  drm/amd/display: limit timing for single dimm memory
  drm/amd/display: set dcn315 lb bpp to 48
  drm/amdgpu: Fix desktop freezed after gpu-reset
  drm/rockchip: vop2: Use regcache_sync() to fix suspend/resume
  drm/nouveau: fix incorrect conversion to dma_resv_wait_timeout()
  drm/rockchip: vop2: fix suspend/resume
  drm/i915: Fix fast wake AUX sync len
  drm/sched: Check scheduler ready before calling timeout handling

I didn't really want to do this, but as part of all the other changes to
the user copy loops, I've been looking at this horror.

I tried to clean it up multiple times, but every time I just found more
problems, and the way it's written, it's just too hard to fix them.

For example, the code is written to do quad-word alignment, and will use
regular byte accesses to get to that point.  That's fairly simple, but
it means that any initial 8-byte alignment will be done with cached
copies.

However, the code then is very careful to do any 4-byte _tail_ accesses
using an uncached 4-byte write, and that was claimed to be relevant in
commit a82eee74 ("x86/uaccess/64: Handle the caching of 4-byte
nocache copies properly in __copy_user_nocache()").

So if you do a 4-byte copy using that function, it carefully uses a
4-byte 'movnti' for the destination.  But if you were to do a 12-byte
copy that is 4-byte aligned, it would _not_ do a 4-byte 'movnti'
followed by a 8-byte 'movnti' to keep it all uncached.

Instead, it would align the destination to 8 bytes using a
byte-at-a-time loop, and then do a 8-byte 'movnti' for the final 8
bytes.

The main caller that cares is __copy_user_flushcache(), which knows
about this insanity, and has odd cases for it all.  But I just can't
deal with looking at this kind of "it does one case right, and another
related case entirely wrong".

And the code really wasn't fixable without hard drugs, which I try to
avoid.

So instead, rewrite it in a form that hopefully not only gets this
right, but is a bit more maintainable.  Knock wood.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'amd-drm-fixes-6.3-2023-04-19' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes

amd-drm-fixes-6.3-2023-04-19:

amdgpu:
- GPU reset fix
- DCN 3.1.5 line buffer fix
- Display fix for single channel memory configs
- Fix a possible divide by 0
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230420031717.7790-1-alexander.deucher@amd.com

Merge tag 'drm-intel-fixes-2023-04-19' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes

drm/i915 fixes for v6.3 final:
- Fix fast wake AUX sync len
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87354w1b76.fsf@intel.com

Merge tag 'drm-misc-fixes-2023-04-20-2' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes

Short summary of fixes pull:

 * nouveau: fix dma-resv timeout
 * rockchip: fix suspend/resume
 * sched: fix timeout handling
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230420083114.GA17651@linux-uq9g

Pull pci fix from Bjorn Helgaas:

 - Previously we ignored PCI devices if the DT "status" property or the
   ACPI _STA method said it was not present.

   Per spec, _STA cannot be used for that purpose, and using it that way
   caused regressions, so skip the _STA check (Rob Herring)

* tag 'pci-v6.3-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
  PCI: Restrict device disabled status check to DT

Currently, a limit of 0 results in a hard coded metering over 6 hours.
Since the default is a set limit, I suspect no one truly depends on this
rather arbitrary setting. Repurpose it for an arguably more useful
"unlimited" mode, where the delay is 0.

Note that if block groups are too new, or go fully empty, there is still
a delay associated with those conditions. Those delays implement
heuristics for not trimming a region we are relatively likely to fully
overwrite soon.

CC: stable@vger.kernel.org # 6.2+
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Boris Burkov <boris@bur.io>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

Previously, the default was a relatively conservative 10. This results
in a 100ms delay, so with ~300 discards in a commit, it takes the full
30s till the next commit to finish the discards. On a workstation, this
results in the disk never going idle, wasting power/battery, etc.

Set the default to 1000, which results in using the smallest possible
delay, currently, which is 1ms. This has shown to not pathologically
keep the disk busy by the original reporter.

Link: https://lore.kernel.org/linux-btrfs/Y%2F+n1wS%2F4XAH7X1p@nz/
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2182228
CC: stable@vger.kernel.org # 6.2+
Reviewed-by: Neal Gompa <neal@gompa.dev
Signed-off-by: Boris Burkov <boris@bur.io>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

This partially reverts commit e161d4b6.

Turns out the channelmap variable is not actually read-only, it's modified
through the MCI_GPM_CLR_CHANNEL_BIT() macro further down in the function,
so making it read-only causes page faults when that code is hit.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=217183
Link: https://lore.kernel.org/r/20230413214118.153781-1-toke@toke.dk
Fixes: e161d4b6 ("wifi: ath9k: Make arrays prof_prio and channelmap static const")
Cc: stable@vger.kernel.org
Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull Rust fixes from Miguel Ojeda:
 "Most of these are straightforward.

  The last one is more complex, but it only touches Rust + GCC builds
  which are for the moment best-effort.

   - Code: Missing 'extern "C"' fix.

   - Scripts: 'is_rust_module.sh' and 'generate_rust_analyzer.py' fixes.

   - A couple trivial fixes

   - Build: Rust + GCC build fix and 'grep' warning fix"

* tag 'rust-fixes-6.3' of https://github.com/Rust-for-Linux/linux:
  rust: allow to use INIT_STACK_ALL_ZERO
  rust: fix regexp in scripts/is_rust_module.sh
  rust: build: Fix grep warning
  scripts: generate_rust_analyzer: Handle sub-modules with no Makefile
  rust: kernel: Mark rust_fmt_argument as extern "C"
  rust: sort uml documentation arch support table
  rust: str: fix requierments->requirements typo

Commit 6fffbc7a ("PCI: Honor firmware's device disabled status")
checked the firmware device status for both DT and ACPI devices. That
caused a regression in some ACPI systems. The exact reason isn't clear.
It's possibly a firmware bug. For now, at least, refactor the check to
be for DT based systems only.

Note that the original implementation leaked a refcount which is now
correctly handled.

[bhelgaas: Per ACPI r6.5, sec 6.3.7, for devices on an enumerable bus, _STA
must return with bit[0] ("device is present") set]

Link: https://lore.kernel.org/all/m2fs9lgndw.fsf@gmail.com/
Fixes: 6fffbc7a ("PCI: Honor firmware's device disabled status")
Link: https://lore.kernel.org/r/20230419193513.708818-1-robh@kernel.org
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217317Reported-by: Donald Hunter <donald.hunter@gmail.com>
Reported-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Tested-by: Donald Hunter <donald.hunter@gmail.com>
Tested-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Binbin Zhou <zhoubinbin@loongson.cn>
Cc: Liu Peibao <liupeibao@loongson.cn>
Cc: Huacai Chen <chenhuacai@loongson.cn>