- add SPDX header;
- adjust title markup;
- mark code blocks and literals as such;
- adjust identation, whitespaces and blank lines;
- add to networking/index.rst.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

- add SPDX header;
- adjust title markup;
- mark code blocks and literals as such;
- use footnote markup;
- mark tables as such;
- adjust identation, whitespaces and blank lines;
- add to networking/index.rst.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

- add SPDX header;
- adjust title markup;
- adjust identation, whitespaces and blank lines;
- add to networking/index.rst.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

- add SPDX header;
- add a document title;
- adjust titles and chapters, adding proper markups;
- mark code blocks and literals as such;
- mark tables as such;
- adjust identation, whitespaces and blank lines;
- add to networking/index.rst.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

- add SPDX header;
- add a document title;
- mark code blocks and literals as such;
- adjust identation, whitespaces and blank lines;
- add to networking/index.rst.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

- add SPDX header;
- adjust titles and chapters, adding proper markups;
- comment out text-only TOC from html/pdf output;

- mark code blocks and literals as such;

- adjust identation, whitespaces and blank lines;
- add to networking/index.rst.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Not much to be done here:

- add SPDX header;
- add a document title;
- use :field: markup for the version number;
- add to networking/index.rst.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

- add SPDX header;
- adjust titles and chapters, adding proper markups;
- mark lists as such;
- mark code blocks and literals as such;
- adjust identation, whitespaces and blank lines;
- add to networking/index.rst.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

- add SPDX header;
- adjust title markup;
- mark code blocks and literals as such;
- adjust identation, whitespaces and blank lines;
- add to networking/index.rst.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

- add SPDX header;
- adjust title markup;
- comment out text-only TOC from html/pdf output;
- mark code blocks and literals as such;
- adjust identation, whitespaces and blank lines;
- add to networking/index.rst.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

- add SPDX header;
- add a document title;
- mark code blocks and literals as such;
- mark lists as such;
- adjust identation, whitespaces and blank lines;
- add to networking/index.rst.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

- add SPDX header;
- adjust titles and chapters, adding proper markups;
- mark code blocks and literals as such;
- adjust identation, whitespaces and blank lines;
- add to networking/index.rst.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

- add SPDX header;
- mark code blocks and literals as such;
- use :field: markup;
- adjust identation, whitespaces and blank lines;
- add to networking/index.rst.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

- add SPDX header;
- adjust titles and chapters, adding proper markups;
- comment out text-only TOC from html/pdf output;
- mark code blocks and literals as such;
- mark tables as such;
- add notes markups;
- adjust identation, whitespaces and blank lines;
- add to networking/index.rst.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

- add SPDX header;
- adjust titles and chapters, adding proper markups;
- mark code blocks and literals as such;
- mark tables as such;
- adjust identation, whitespaces and blank lines;
- add to networking/index.rst.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

There isn't much to be done here. Just:

- add SPDX header;
- add a document title.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

There isn't much to be done here. Just:

- add SPDX header;
- add a document title.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

- add SPDX header;
- use document title markup;
- add notes markups;
- mark code blocks and literals as such;
- mark tables as such;
- adjust identation, whitespaces and blank lines;
- add to networking/index.rst.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

- add SPDX header;
- add document title markup;
- add notes markups;
- mark tables as such;
- mark code blocks and literals as such;
- adjust identation, whitespaces and blank lines;
- add to networking/index.rst.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

- add SPDX header;
- use copyright symbol;
- adjust titles and chapters, adding proper markups;
- mark lists as such;
- adjust identation, whitespaces and blank lines;
- add to networking/index.rst.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

- add SPDX header;
- use title markups;
- mark code blocks and literals as such;
- adjust identation, whitespaces and blank lines;
- add to networking/index.rst.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

There are two text files for caif, plus one already converted
file.

Convert the two remaining ones to ReST, create a new index.rst
file for CAIF, adding it to the main networking documentation
index.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

The change to polled IO for MDIO completion assumes that MII events
are only generated for MDIO transactions. However on some SoCs writing
to the MII_SPEED register can also trigger an MII event. As a result,
the next MDIO read has a pending MII event, and immediately reads the
data registers before it contains useful data. When the read does
complete, another MII event is posted, which results in the next read
also going wrong, and the cycle continues.

By writing 0 to the MII_DATA register before writing to the speed
register, this MII event for the MII_SPEED is suppressed, and polled
IO works as expected.

Fixes: 29ae6bd1 ("net: ethernet: fec: Replace interrupt driven MDIO with polled IO")
Reported-by: Andy Duan <fugang.duan@nxp.com>
Suggested-by: Andy Duan <fugang.duan@nxp.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

When building arm32 allmodconfig:

ERROR: modpost: "__aeabi_uldivmod"
[drivers/net/ethernet/freescale/dpaa2/fsl-dpaa2-eth.ko] undefined!

frames and cdan are both of type __u64 (unsigned long long) so we need
to use div64_u64 to avoid this issues.

Fixes: 460fd830 ("dpaa2-eth: add channel stat to debugfs")
Link: https://github.com/ClangBuiltLinux/linux/issues/1012Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reported-by: kernelci.org bot <bot@kernelci.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix the following warning:

drivers/net/phy/bcm54140.c:663:5: warning:
symbol 'bcm54140_did_interrupt' was not declared. Should it be static?
drivers/net/phy/bcm54140.c:672:5: warning:
symbol 'bcm54140_ack_intr' was not declared. Should it be static?
drivers/net/phy/bcm54140.c:684:5: warning:
symbol 'bcm54140_config_intr' was not declared. Should it be static?
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: ChenTao <chentao107@huawei.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jakub Kicinski says:

====================
kselftest: add fixture parameters

This set is an attempt to make running tests for different
sets of data easier. The direct motivation is the tls
test which we'd like to run for TLS 1.2 and TLS 1.3,
but currently there is no easy way to invoke the same
tests with different parameters.

Tested all users of kselftest_harness.h.

Dave, would it be possible to take these via net-next?
It seems we're failing to get Shuah's attention.

v2:
 - don't run tests by fixture
 - don't pass params as an explicit argument

v3:
 - go back to the orginal implementation with an extra
   parameter, and running by fixture (Kees);
 - add LIST_APPEND helper (Kees);
 - add a dot between fixture and param name (Kees);
 - rename the params to variants (Tim);

v4:
 - whitespace fixes.

v5 (Kees):
 - move a comment;
 - remove a temporary variable;
 - reword the commit message on patch 4.

v6:
 - resend for net-next.

v1: https://lore.kernel.org/netdev/20200313031752.2332565-1-kuba@kernel.org/
v2: https://lore.kernel.org/netdev/20200314005501.2446494-1-kuba@kernel.org/
v3: https://lore.kernel.org/netdev/20200316225647.3129354-1-kuba@kernel.org/
v4: https://lore.kernel.org/netdev/20200317010419.3268916-1-kuba@kernel.org/
v5: https://lore.kernel.org/netdev/20200318010153.40797-1-kuba@kernel.org/
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

TLS 1.2 and TLS 1.3 differ in the implementation.
Use fixture parameters to run all tests for both
versions, and remove the one-off TLS 1.2 test.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Allow users to build parameterized variants of fixtures.

If fixtures want variants, they call FIXTURE_VARIANT() to declare
the structure to fill for each variant. Each fixture will be re-run
for each of the variants defined by calling FIXTURE_VARIANT_ADD()
with the differing parameters initializing the structure.

Since tests are being re-run, additional initialization (steps,
no_print) is also added.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Now that all tests have a fixture object move from a global
list of tests to a list of tests per fixture.

Order of tests may change as we will now group and run test
fixture by fixture, rather than in declaration order.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Grouping tests by fixture will allow us to parametrize
test runs. Create full objects for fixtures.

Add a "global" fixture for tests without a fixture.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Kees suggest to factor out the list append code to a macro,
since following commits need it, which leads to code duplication.
Suggested-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Roopa Prabhu says:

====================
New sysctl to turn off nexthop API compat mode

Currently route nexthop API maintains user space compatibility
with old route API by default. Dumps and netlink notifications
support both new and old API format. In systems which have
moved to the new API, this compatibility mode cancels some
of the performance benefits provided by the new nexthop API.

This patch adds new sysctl nexthop_compat_mode which is on
by default but provides the ability to turn off compatibility
mode allowing systems to run entirely with the new routing
API if they wish to. Old route API behaviour and support is
not modified by this sysctl

v4:
	- Use davids note for Documenting the sysctl
	- test with latest iproute2 and adjust 'pref'

v3:
	- Document new sysctl
	- move sysctl to use proc_dointvec_minmax with 0 and 1 values
	- selftest: remove pref medium in ipv6 test

v2:
       - Incorporate David Aherns pointers on covering dumps and
         nexthop deletes. Also use one ipv4 sysctl to cover
         both ipv4 and ipv6 (I see it is done that way for many
         others)
       - Added a selftest to cover dump and notfications for nexthop
	 api compat mode
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

New tests to check route dump and notifications with
net.ipv4.nexthop_compat_mode on and off.
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Current route nexthop API maintains user space compatibility
with old route API by default. Dumps and netlink notifications
support both new and old API format. In systems which have
moved to the new API, this compatibility mode cancels some
of the performance benefits provided by the new nexthop API.

This patch adds new sysctl nexthop_compat_mode which is on
by default but provides the ability to turn off compatibility
mode allowing systems to run entirely with the new routing
API. Old route API behaviour and support is not modified by this
sysctl.

Uses a single sysctl to cover both ipv4 and ipv6 following
other sysctls. Covers dumps and delete notifications as
suggested by David Ahern.
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Used in subsequent work to skip route delete
notifications on nexthop deletes.
Suggested-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In case of error, the function gen_pool_create() returns NULL pointer
not ERR_PTR(). The IS_ERR() test in the return value check should be
replaced with NULL test.

Fixes: 93a76530 ("net: ethernet: ti: introduce am65x/j721e gigabit eth subsystem driver")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

There's a number of consumer mainboards where the BIOS leaves the PHY
in a state that it's reporting an invalid PHY ID. To detect such cases
add the PHY ID to the error message if no dedicated PHY driver is found.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Simon Wunderlich says:

====================
This cleanup patchset includes the following patches:

 - bump version strings, by Simon Wunderlich

 - fix spelling error, by Sven Eckelmann

 - drop unneeded types.h include, by Sven Eckelmann

 - change random number generation to prandom_u32_max(),
   by Sven Eckelmann

 - remove unused function batadv_arp_change_timeout(), by Yue Haibing
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Ido Schimmel says:

====================
mlxsw: Rework matchall offloading plumbing

Jiri says:

Currently the matchall and flower are handled by registering separate
callbacks in mlxsw. That leads to faulty indication "in_hw_count 2" in
filter show command for every inserted flower filter. That happens
because matchall callback just blindly returns 0 for it and it is
wrongly accounted for as "the offloader".

I inspected different ways to fix this problem. The only clean solution
is to rework handling of matchall in mlxsw a bit. The driver newely
registers one callback for bound block which is called for both matchall
and flower filter insertions.

On the way, iron out the matchall code a bit, push it into a separate
file etc.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Add test for matchall classifier with mirred egress mirror action.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>