- 19 Jul, 2012 1 commit
-
-
Julian Anastasov authored
Move fib_compute_spec_dst at the only place where it is needed. Signed-off-by:
Julian Anastasov <ja@ssi.bg> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- 18 Jul, 2012 39 commits
-
-
Alexander Duyck authored
This change is just meant to defragment the flags as there are several hole that have been introduced since several features, or the flags for them, have been removed. Signed-off-by:
Alexander Duyck <alexander.h.duyck@intel.com> Tested-by:
Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Alexander Duyck authored
All of our hardware supports RSS even if it is only for a single queue. So instead of toting around the RSS enable flag I am updating the code so that all devices are enabled and if we want to disable RSS it is indicated via the RSS mask. Signed-off-by:
Alexander Duyck <alexander.h.duyck@intel.com> Tested-by:
Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Alexander Duyck authored
This change essentially makes it so that we can enable almost all of the features all at once. This patch allows for the combination of SR-IOV, DCB, and FCoE in the case of the x540. It also beefs up the SR-IOV by adding support for RSS to the PF. The testing matrix gets to be very complex for this patch as there are a number of different features and subsets for queueing options. I tried to narrow these down a bit by restricting the PF to only supporting 4TC DCB when it is enabled in addition to SR-IOV. Cc: Greg Rose <gregory.v.rose@intel.com> Cc: John Fastabend <john.r.fastabend@intel.com> Signed-off-by:
Alexander Duyck <alexander.h.duyck@intel.com> Tested-by:
Phil Schmitt <phillip.j.schmitt@intel.com> Tested-by:
Ross Brattain <ross.b.brattain@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Alexander Duyck authored
This change allows all pools from the default pool forward to be enabled vi ixgbe_configure_virtualization. This is needed as we are planning to use queues belonging to adjacent pools for FCoE when SR-IOV and FCoE are both enabled. In addition this patch contains some minor formatting changes as there were a few spots that seemed to be in need of some cleanup. Signed-off-by:
Alexander Duyck <alexander.h.duyck@intel.com> Tested-by:
Stephen Ko <stephen.s.ko@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Alexander Duyck authored
In ixgbevf_get_ringparam we could run into a NULL pointer dereference if the rings were not allocated when we attempted the call. To prevent that we can just access the tx/rx_ring_count values instead of attempting to access the rings to get the count. This change corrects a memory leak and memory corruption in ixgbevf_set_ringparam. The memory leak was due to us not freeing the resources from the ring before overwriting them. This change corrects the memory leak by making certain to call ixgbe_free_tx/rx_resources on the rings prior to freeing them. The memory corruption was because we were replacing the rings but not updating the q_vectors. It addresses the memory corruption by leaving the rings in place and instead just copying the contents of the new rings into the existing rings. Signed-off-by:
Alexander Duyck <alexander.h.duyck@intel.com> Acked-by:
Greg Rose <gregory.v.rose@intel.com> Tested-by:
Sibai Li <sibai.li@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Alexander Duyck authored
There is a good bit of redundancy between the Tx checksum and segmentation offloads. In order to reduce some of this I am moving the code for creating a context descriptor into a separate function. Signed-off-by:
Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by:
Greg Rose <gregory.v.rose@intel.com> Tested-by:
Sibai Li <sibai.li@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Alexander Duyck authored
This change adds the netdev to the ring structure. This allows for a quicker transition from ring to netdev without having to go from ring to adapter to netdev. Signed-off-by:
Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by:
Greg Rose <gregory.v.rose@intel.com> Tested-by:
Sibai Li <sibai.li@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Alexander Duyck authored
The driver is going back one step from its' previous location before bumping tail. This is incorrect. We should just be writing the value of next_to_use into the tail register. Signed-off-by:
Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by:
Greg Rose <gregory.v.rose@intel.com> Tested-by:
Sibai Li <sibai.li@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Pascal Bouchareine authored
We have had an issue when using ixgbe+ixgbevf and 802.1 VLAN tagging. When attaching a VLAN to a VF, frames with a 802.1q priority appeared untagged on the VF hence not reaching the VLAN, where frames with priority 0 where tagged as expected and seen by the VLAN device. This seems due to the way ixgbevf is looking up the full tag (prio+cfi+vlan) against the adapter active_vlans, as a condition to mark the skb tagged. Signed-off-by:
Pascal Bouchareine <pascal@gandi.net> Tested-by:
Sibai Li <sibai.li@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Eric Dumazet authored
Introduce ipv6_addr_hash() helper doing a XOR on all bits of an IPv6 address, with an optimized x86_64 version. Use it in flow dissector, as suggested by Andrew McGregor, to reduce hash collision probabilities in fq_codel (and other users of flow dissector) Use it in ip6_tunnel.c and use more bit shuffling, as suggested by David Laight, as existing hash was ignoring most of them. Use it in sunrpc and use more bit shuffling, using hash_32(). Use it in net/ipv6/addrconf.c, using hash_32() as well. As a cleanup, use it in net/ipv4/tcp_metrics.c Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
Andrew McGregor <andrewmcgr@gmail.com> Cc: Dave Taht <dave.taht@gmail.com> Cc: Tom Herbert <therbert@google.com> Cc: David Laight <David.Laight@ACULAB.COM> Cc: Joe Perches <joe@perches.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
Cloned patch of Eric Dumazet for bonding. Some workloads greatly benefit of IFF_XMIT_DST_RELEASE capability on output net device, avoiding dirtying dst refcount. team currently disables IFF_XMIT_DST_RELEASE unconditionally. If all ports have the IFF_XMIT_DST_RELEASE bit set, then team dev can also have it in its priv_flags. Signed-off-by:
Jiri Pirko <jiri@resnulli.us> Acked-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Mugunthan V N authored
Enabling runtime PM support for cpsw driver Signed-off-by:
Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Mugunthan V N authored
Enabling runtime PM support for davinci mdio driver Signed-off-by:
Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Peter Wu authored
This patch adds the netpoll function to support netconsole. Tested and works fine on my "JMC250 PCI Express Gigabit Ethernet Controller" (PCI ID 0250). Signed-off-by:
Peter Wu <lekensteyn@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Krishna Kumar authored
Use correct allocation flags during copy of user space fragments to the kernel. Also "improve" couple of for loops. Signed-off-by:
Krishna Kumar <krkumar2@in.ibm.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Heiko Schocher authored
add OF support for the davinci_emac driver. Signed-off-by:
Heiko Schocher <hs@denx.de> Acked-by:
Sekhar Nori <nsekhar@ti.com> Signed-off-by:
Anatolij Gustschin <agust@denx.de> Cc: netdev@vger.kernel.org Cc: davinci-linux-open-source@linux.davincidsp.com Cc: linux-arm-kernel@lists.infradead.org Cc: devicetree-discuss@lists.ozlabs.org Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Anatoly Sivov <mm05@mail.ru> Cc: David Miller <davem@davemloft.net> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Karsten Keil authored
usb_alloc_urb() return value needs to be checked to avoid later NULL pointer access. Reported by rucsoftsec@gmail.com via bugzilla.kernel.org #44601. Signed-off-by:
Karsten Keil <kkeil@linux-pingi.de> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Karsten Keil authored
pnp_activate_dev() return value needs to be checked to make sure that following calls calls to the PNP functions do work correctly. Fix for report #44491 on bugzilla.kernel.org. Signed-off-by:
Karsten Keil <kkeil@linux-pingi.de> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Dan Carpenter authored
The condition is always true so WOL will never work. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
Drivers should pull only ethernet header from page frag to skb->head. Pulling 64 bytes is too much for TCP (without options) on IPv4. However, it makes sense to pull all the frame if it fits the 128 bytes bloc allocated for skb->head, to free one page per small incoming frame. Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Po-Yu Chuang <ratbert@faraday-tech.com> Acked-by:
Yan-Pai Chen <yanpai.chen@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Bjørn Mork authored
Sold by O2 (telefonica germany) under the name "LTE4G" Tested-by:
Thomas Schäfer <tschaefer@t-online.de> Signed-off-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Saurabh authored
New VTI tunnel kernel module, Kconfig and Makefile changes. Signed-off-by:
Saurabh Mohan <saurabh.mohan@vyatta.com> Reviewed-by:
Stephen Hemminger <shemminger@vyatta.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Saurabh authored
Incorporated David and Steffen's comments. Add hook for rx-path xfmr4_mode_tunnel for VTI tunnel module. Signed-off-by:
Saurabh Mohan <saurabh.mohan@vyatta.com> Reviewed-by:
Stephen Hemminger <shemminger@vyatta.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Christian Riesch authored
Return -ENOTSUPP if the initialization fails because the device is configured for a mode that is not supported by the driver. Signed-off-by:
Christian Riesch <christian.riesch@omicron.at> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
Followup of commit 0c24604b (tcp: implement RFC 5961 4.2) As reported by Vijay Subramanian, we should send a challenge ACK instead of a dup ack if a SYN flag is set on a packet received out of window. This permits the ratelimiting to work as intended, and to increase correct SNMP counters. Suggested-by:
Vijay Subramanian <subramanian.vijay@gmail.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Acked-by:
Vijay Subramanian <subramanian.vijay@gmail.com> Cc: Kiran Kumar Kella <kkiran@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
Some workloads greatly benefit of IFF_XMIT_DST_RELEASE capability on output net device, avoiding dirtying dst refcount. bonding currently disables IFF_XMIT_DST_RELEASE unconditionally. If all slaves have the IFF_XMIT_DST_RELEASE bit set, then bonding master can also have it in its priv_flags Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: Andy Gospodarek <andy@greyhouse.net> Cc: Tom Herbert <therbert@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Bjørn Mork authored
The usbnet API use the device ID table to store a pointer to a minidriver. Setting a generic pointer for dynamic device IDs will in most cases make them work as expected. usbnet will otherwise treat the dynamic IDs as blacklisted. That is rarely useful. There is no standard class describing devices supported by this driver, and most vendors don't even provide enough information to allow vendor specific wildcard matching. The result is that most of the supported devices must be explicitly listed in the device table. Allowing dynamic IDs to work both simplifies testing and verification of new devices, and provides a way for end users to use a device before the ID is added to the driver. Signed-off-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Kevin Groeneveld authored
Add support for 64 bit stats to Broadcom b44 ethernet driver. Signed-off-by:
Kevin Groeneveld <kgroeneveld@gmail.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Padmanabh Ratnakar authored
The ability of driver to transmit packets depends on logical state of the link. Ignore physical link status. Signed-off-by:
Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Padmanabh Ratnakar authored
Lancer FW has added new capability checks for VFs. Driver should only use those capabilities which are allowed for VFs. Signed-off-by:
Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-nextDavid S. Miller authored
Jerr Kirsher says: ==================== This series contains updates to ixgbe & ixgbevf. ... Alexander Duyck (6): ixgbe: Ping the VFs on link status change to trigger link change ixgbe: Handle failures in the ixgbe_setup_rx/tx_resources calls ixgbe: Move configuration of set_real_num_rx/tx_queues into open ixgbe: Update the logic for ixgbe_cache_ring_dcb and DCB RSS configuration ixgbe: Cleanup logic for MRQC and MTQC configuration ixgbevf: Update descriptor macros to accept pointers and drop _ADV suffix ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://violet.fr.zoreil.com/romieu/linuxDavid S. Miller authored
Francois Romieu says: ==================== Francois Romieu (1): r8169: verbose error message. Hayes Wang (1): r8169: remove rtl_ocpdr_cond. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/bwh/sfc-nextDavid S. Miller authored
Ben Hutchings says: ==================== 1. Fix potential badness when running a self-test with SR-IOV enabled. 2. Fix calculation of some interface statistics that could run backward. 3. Miscellaneous cleanup. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
We should provide to inet6_csk_route_socket a struct flowi6 pointer, so that net6_csk_xmit() works correctly instead of sending garbage. Also add some consts Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
Yuchung Cheng <ycheng@google.com> Cc: Neal Cardwell <ncardwell@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Alexander Duyck authored
This change updates the descriptor macros to accept pointers, updates the name to drop the _ADV suffix, and include the IXGBEVF name in the macro. Signed-off-by:
Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by:
Greg Rose <gregory.v.rose@intel.com> Tested-by:
Sibai Li <sibai.li@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Alexander Duyck authored
This change is meant to make the code much more readable for MTQC and MRQC configuration. The big change is that I simplified much of the logic so that we are essentially handling just 4 cases and their variants. In the cases where RSS is disabled we are actually just programming the RETA table with all 1s resulting in a single queue RSS. In the case of SR-IOV I am treating that as a subset of VMDq. This all results int he following configuration for the hardware: DCB En Dis VMDq En VMDQ/DCB VMDq/RSS Dis DCB/RSS RSS Cc: John Fastabend <john.r.fastabend@intel.com> Signed-off-by:
Alexander Duyck <alexander.h.duyck@intel.com> Tested-by:
Stephen Ko <stephen.s.ko@intel.com> Tested-by:
Ross Brattain <ross.b.brattain@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Alexander Duyck authored
This change cleans up some of the logic in an attempt to try and simplify things for how we are configuring DCB w/ RSS. In this patch I basically did 3 things. I updated the logic for getting the first register index. I applied the fact that all TCs get the same number of queues to simplify the looping logic in caching the DCB ring register. Finally I updated how we configure the RQTC register to match the fact that all TCs are assigned the same number of queues. Cc: John Fastabend <john.r.fastabend@intel.com> Signed-off-by:
Alexander Duyck <alexander.h.duyck@intel.com> Tested-by:
Phil Schmitt <phillip.j.schmitt@intel.com> Tested-by:
Ross Brattain <ross.b.brattain@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Alexander Duyck authored
It makes much more sense for us to configure the real number of Tx and Rx queues in the ixgbe_open call than it does in ixgbe_set_num_queues. By setting the number in ixgbe_open we can avoid a number of unecessary updates and only have to make the calls once. Signed-off-by:
Alexander Duyck <alexander.h.duyck@intel.com> Tested-by:
Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Alexander Duyck authored
Previously we were exiting without cleaning up the memory internally on the ixgbe_setup_rx_resources and ixgbe_setup_tx_resources calls. Instead of forcing the caller to clean things up for us we should instead just unwind the rings and free the memory as we go. This way we can more gracefully clean up the rings in the event of an allocation failure. Signed-off-by:
Alexander Duyck <alexander.h.duyck@intel.com> Tested-by:
Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-