- 06 Apr, 2023 31 commits
-
-
Dmitry Baryshkov authored
Rework static color fill code to separate the pipe / pipe_cfg handling. This is a preparation for the r_pipe support. Reviewed-by:
Abhinav Kumar <quic_abhinavk@quicinc.com> Tested-by: Abhinav Kumar <quic_abhinavk@quicinc.com> # sc7280 Signed-off-by:
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/527340/ Link: https://lore.kernel.org/r/20230316161653.4106395-26-dmitry.baryshkov@linaro.orgSigned-off-by:
-
Dmitry Baryshkov authored
Rework the code flushing CSC settings for the plane. Separate out the pipe and pipe_cfg as a preparation for r_pipe support. Reviewed-by:
-
Dmitry Baryshkov authored
Split pipe-dependent code from dpu_plane_atomic_check() into the separate function dpu_plane_atomic_check_pipe(). This is one of preparational steps to add r_pipe support. Reviewed-by:
-
Dmitry Baryshkov authored
Split pipe-dependent code from dpu_plane_sspp_atomic_update() into the separate function dpu_plane_sspp_update_pipe(). This is one of preparational steps to add r_pipe support. Reviewed-by:
-
Dmitry Baryshkov authored
The plane's clipped coordinates has already been validated against FB size in the drm_atomic_plane_check(). There is no need to check them again. Remove corresponding checks and inline dpu_plane_validate_src(). Reviewed-by:
-
Dmitry Baryshkov authored
Now as all accesses to pipe_cfg and pstate have been cleaned, add struct dpu_hw_sspp_cfg to struct dpu_plane_state, so that dpu_plane_atomic_check() and dpu_plane_atomic_update() do not have a chance to disagree about src/dst rectangles (currently dpu_plane_atomic_check() uses unclipped rectangles, while dpu_plane_atomic_update() uses clipped rectangles calculated by drm_atomic_helper_check_plane_state()). Reviewed-by:
-
Dmitry Baryshkov authored
Rework bandwidth/clock calculation functions to use mode directly rather than fetching it through the plane data. Reviewed-by:
-
Dmitry Baryshkov authored
Rewrite dpu_plane's QoS related functions to take struct dpu_sw_pipe and struct dpu_format as arguments rather than fetching them from the pstate or drm_framebuffer. Reviewed-by:
-
Dmitry Baryshkov authored
The helper drm_atomic_helper_check_plane_state() already checks whether the scaled and clipped plane falls into the CRTC visible region (and clears plane_state->visible if it doesn't). Drop the redundant check from dpu_crtc_atomic_check(). Reviewed-by:
-
Dmitry Baryshkov authored
Move plane state updates from dpu_crtc_atomic_check() to the function where they belong: to dpu_plane_atomic_check(). Reviewed-by:
-
Dmitry Baryshkov authored
The dpu_crtc_atomic_check() compares blending stage with DPU_STAGE_MAX (maximum amount of blending stages supported by the driver), however we should compare it against .max_mixer_blendstages, the maximum blend stage supported by the mixer. Reviewed-by:
-
Dmitry Baryshkov authored
Neither source split nor multirect are properly supported at this moment. Both of these checks depend on normalized_zpos being equal for several planes (which is never the case for normalized zpos). Drop these checks to simplify dpu_crtc_atomic_check(). The actual support for either of these features is not removed from the backend code (sspp, ctl, etc). Reviewed-by:
-
Dmitry Baryshkov authored
As struct dpu_hw_sspp_cfg describes only the source and destination rectangles, it is a software pipe configuration now. Rename it accordingly. Reviewed-by:
-
Dmitry Baryshkov authored
Remove dpu_hw_fmt_layout instance from struct dpu_hw_sspp_cfg, leaving only src_rect and dst_rect. This way all the pipes used by the plane will have a common layout instance (as the framebuffer is shared between them), while still keeping a separate src/dst rectangle configuration for each pipe. Reviewed-by:
-
Dmitry Baryshkov authored
Move stride programming to dpu_hw_sspp_setup_sourceaddress(), so that dpu_hw_sspp_setup_rects() programs only source and destination rectangles. Reviewed-by:
-
Dmitry Baryshkov authored
Set SSPP_SRCn_ADDR registers to 0 while setting up solid fill, as we can not be sure that the previous address is still valid. Reviewed-by:
-
Dmitry Baryshkov authored
There is no need to pass full dpu_hw_sspp_cfg instance to _dpu_hw_sspp_setup_scaler3, pass just struct dpu_format pointer. Reviewed-by:
-
Dmitry Baryshkov authored
Where feasible, use dpu_sw_pipe rather than a combo of dpu_hw_sspp and multirect_index/_mode arguments. Reviewed-by:
-
Dmitry Baryshkov authored
Wrap SSPP and multirect index/mode into a single structure that represents software view on the pipe used. Reviewed-by:
-
Dmitry Baryshkov authored
There no more need for the dpu_plane_pipe() function, crtc code can access pstate->pipe_hw.idx directly. Reviewed-by:
-
Dmitry Baryshkov authored
In preparation to adding fully virtualized planes, move struct dpu_hw_sspp instance from struct dpu_plane to struct dpu_plane_state, as it will become a part of state (variable, changes during runtime) rather than part of a plane (ideally should be statically allocated during boot). The sspp pointer is set at the dpu_plane_reset(), since this is the function which allocates the state. Once we have fully virtual plane<->SSPP relationship, the SSPP will be allocated dynamically in the dpu_plane_atomic_check() function. Reviewed-by:
-
Dmitry Baryshkov authored
The pipe's layout is not cached, corresponding data structure is zeroed out each time in the dpu_plane_sspp_atomic_update(), right before the call to _dpu_plane_set_scanout() -> dpu_format_populate_layout(). Drop plane_addr comparison against previous layout and corresponding EAGAIN handling. Reviewed-by:
-
Dmitry Baryshkov authored
As SSPP blocks are now visible through dpu_kms->rm.sspp_blocks, move SSPP debugfs creation from dpu_plane to dpu_kms. We are going to break the 1:1 correspondence between planes and SSPPs, so it makes no sense anymore to create SSPP debugfs entries in dpu_plane.c Reviewed-by:
-
Dmitry Baryshkov authored
Follow the example of all other hw blocks and initialize SSPP blocks in Resource Manager. Reviewed-by:
-
Dmitry Baryshkov authored
For all hardware blocks except SSPP the corresponding struct is named after the block. Rename dpu_hw_pipe (SSPP structure) to dpu_hw_sspp. Also rename struct dpu_hw_pipe_cfg to dpu_hw_sspp_cfg to follow this change. Reviewed-by:
-
Leonard Lausen authored
Commit da7716a2 ("drm/msm/dpu: Add support for XR30 format") enabled support for the 10-bit XR30 color format but missed enabling support for the corresponding per-pixel alpha-blending AR30 color format. Declaring only XR30 but not AR30 color format support can trigger bugs in userspace. KDE KWin compositor versions prior to 5.27.3 for example prefer 10-bit color formats, rendering a 1cm^2 black box around the cursor due to missing per-pixel alpha-blending. Signed-off-by:
Leonard Lausen <leonard@lausen.nl> Reviewed-by:
Jessica Zhang <quic_jesszhan@quicinc.com> Tested-by: Jessica Zhang <quic_jesszhan@quicinc.com> # Trogdor (sc7180) Patchwork: https://patchwork.freedesktop.org/patch/527985/ Link: https://lore.kernel.org/r/6f33219dc848ccd7122bce6933338033aa18c33c@lausen.nlSigned-off-by:
-
Kalyan Thota authored
Flush mechanism for DSPP blocks has changed in sc7280 family, it allows individual sub blocks to be flushed in coordination with master flush control. Representation: master_flush && (PCC_flush | IGC_flush .. etc ) This change adds necessary support for the above design. Changes in v1: - Few nits (Doug, Dmitry) - Restrict sub-block flush programming to dpu_hw_ctl file (Dmitry) Changes in v2: - Move the address offset to flush macro (Dmitry) - Separate ops for the sub block flush (Dmitry) Changes in v3: - Reuse the DPU_DSPP_xx enum instead of a new one (Dmitry) Changes in v4: - Use shorter version for unsigned int (Stephen) Changes in v5: - Spurious patch please ignore. Changes in v6: - Add SOB tag (Doug, Dmitry) Changes in v7: - Cache flush mask per dspp (Dmitry) - Few nits (Marijn) Changes in v8: - Few nits (Marijn) Changes in v9: - Use DSPP enum while accessing flush mask to make it readable (Dmitry) - Few nits (Dmitry) Changes in v10: - Fix white spaces in a separate patch (Dmitry) Changes in v11: - Define a macro for dspp flush selection (Marijn) - Few nits (Marijn) Changes in v12: - Minor comments (reorder macros and a condition) (Marijn) Signed-off-by:
Kalyan Thota <quic_kalyant@quicinc.com> Tested-by:
Douglas Anderson <dianders@chromium.org> Patchwork: https://patchwork.freedesktop.org/patch/520701/ Link: https://lore.kernel.org/r/1674814487-2112-1-git-send-email-quic_kalyant@quicinc.comSigned-off-by:
-
Neil Armstrong authored
Document the DPU hardware found on the Qualcomm SM8550 platform. Reviewed-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by:
Neil Armstrong <neil.armstrong@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/517511/ Link: https://lore.kernel.org/r/20230103-topic-sm8550-upstream-mdss-dsi-v3-2-660c3bcb127f@linaro.org [DB: removed interconnect header inclusion] Signed-off-by:
-
Jessica Zhang authored
Now that the TE setup has been moved to prepare_for_kickoff(), we have not prepare_commit() callbacks left. This makes dpu_encoder_prepare_commit() do nothing. Remove prepare_commit() from DPU driver. Changes in V3: - Reworded commit message to be more clear - Corrected spelling mistake in commit message Changes in V4: - Reworded commit message for clarity Signed-off-by:
Marijn Suijten <marijn.suijten@somainline.org> Patchwork: https://patchwork.freedesktop.org/patch/523606/ Link: https://lore.kernel.org/r/20230221184256.1436-4-quic_jesszhan@quicinc.com [DB: fixed merge conflict] Signed-off-by:
-
Jessica Zhang authored
Currently, DPU will enable TE during prepare_commit(). However, this will cause a crash and reboot to sahara when trying to read/write to register in get_autorefresh_config(), because the core clock rates aren't set at that time. This used to work because phys_enc->hw_pp is only initialized in mode set [1], so the first prepare_commit() will return before any register read/write as hw_pp would be NULL. However, when we try to implement support for INTF TE, we will run into the clock issue described above as hw_intf will *not* be NULL on the first prepare_commit(). This is because the initialization of dpu_enc->hw_intf has been moved to dpu_encoder_setup() [2]. To avoid this issue, let's enable TE during prepare_for_kickoff() instead as the core clock rates are guaranteed to be set then. Depends on: "Implement tearcheck support on INTF block" [3] Changes in V3: - Added function prototypes - Reordered function definitions to make change more legible - Removed prepare_commit() function from dpu_encoder_phys_cmd Changes in V4: - Reworded commit message to be more specific - Removed dpu_encoder_phys_cmd_is_ongoing_pptx() prototype [1] https://gitlab.freedesktop.org/drm/msm/-/blob/msm-next/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c#L1109 [2] https://gitlab.freedesktop.org/drm/msm/-/blob/msm-next/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c#L2339 [3] https://patchwork.freedesktop.org/series/112332/Signed-off-by:
-
Jessica Zhang authored
Add a NULL check before calling prepare_commit() in msm_atomic_commit_tail() Signed-off-by:
-
- 03 Apr, 2023 2 commits
-
-
Konrad Dybcio authored
The adreno_load_gpu() path is guarded by an error check on adreno_load_fw(). This function is responsible for loading Qualcomm-only-signed binaries (e.g. SQE and GMU FW for A6XX), but it does not take the vendor-signed ZAP blob into account. By embedding the SQE (and GMU, if necessary) firmware into the initrd/kernel, we can trigger and unfortunate path that would not bail out early and proceed with gpu->hw_init(). That will fail, as the ZAP loader path will not find the firmware and return back to adreno_load_gpu(). This error path involves pm_runtime_put_sync() which then calls idle() instead of suspend(). This is suboptimal, as it means that we're not going through the clean shutdown sequence. With at least A619_holi, this makes the GPU not wake up until it goes through at least one more start-fail-stop cycle. The pm_runtime_put_sync that appears in the error path actually does not guarantee that because of the earlier enabling of runtime autosuspend. Fix that by using pm_runtime_put_sync_suspend to force a clean shutdown. Test cases: 1. All firmware baked into kernel 2. error loading ZAP fw in initrd -> load from rootfs at DE start Both succeed on A619_holi (SM6375) and A630 (SDM845). Fixes: 0d997f95 ("drm/msm/adreno: fix runtime PM imbalance at gpu load") Signed-off-by:
Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by:
Johan Hovold <johan+linaro@kernel.org> Patchwork: https://patchwork.freedesktop.org/patch/530001/ Link: https://lore.kernel.org/r/20230330231517.2747024-1-konrad.dybcio@linaro.orgSigned-off-by:
Rob Clark <robdclark@chromium.org>
-
Konrad Dybcio authored
Recently I contributed the switch to OPP API for all Adreno generations. I did however also skip over the fact that GPUs with a GMU don't specify a core clock of any kind in the GPU node. While that didn't break anything, it did introduce unwanted spam in the dmesg: adreno 5000000.gpu: error -ENOENT: _opp_set_clknames: Couldn't find clock with name: core_clk Guard the entire logic so that it's not used with GMU-equipped GPUs. Fixes: 9f251f93 ("drm/msm/adreno: Use OPP for every GPU generation") Signed-off-by:
-
- 31 Mar, 2023 2 commits
-
-
Konrad Dybcio authored
Add support for matching QFPROM fuse values to get the correct speed bin on A650 (SM8250) GPUs. Reviewed-by:
-
Konrad Dybcio authored
Add support for matching QFPROM fuse values to get the correct speed bin on A640 (SM8150) GPUs. Reviewed-by:
Akhil P Oommen <quic_akhilpo@quicinc.com> Signed-off-by:
-
- 30 Mar, 2023 1 commit
-
-
Dmitry Baryshkov authored
Use adreno_fault_handler() to implement a5xx_fault_handler(). This enables devcoredump support on a5xx platforms, allowing one to capture the crashed GPU state at the time of context fault. Signed-off-by:
-
- 28 Mar, 2023 4 commits
-
-
Dmitry Baryshkov authored
Split the a6xx_fault_handler() into the generic adreno_fault_handler() and platform-specific parts. The adreno_fault_handler() can further be used by a5xx and hopefully by a4xx (at some point). Signed-off-by:
-
Dmitry Baryshkov authored
The commit e25e92e0 ("drm/msm: devcoredump iommu fault support") enabled SMMU stalling to collect GPU state, but only for a6xx. It tied enabling the stall with tha per-instance pagetables creation. Since that commit SoCs with a5xx also gained support for adreno-smmu-priv. Move stalling into generic code and add corresponding resume_translation calls. Signed-off-by:
-
Rob Clark authored
Drop our custom thing and switch to drm_crtc_next_vblank_start() for calculating the time of the start of the next vblank period. Signed-off-by:
-
Rob Clark authored
Add a way for various userspace waits to signal urgency. Signed-off-by:
-
