This patch adds a counter to the ena_adapter struct in
order to keep track of reset failures.
The counter is incremented every time either ena_restore_device()
or ena_destroy_device() fail.
Signed-off-by: Osama Abboud <osamaabb@amazon.com>
Signed-off-by: David Arinzon <darinzon@amazon.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240512134637.25299-2-darinzon@amazon.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Now that this test runs in netdev CI it looks like 10s isn't enough
for debug kernels:
  selftests: net/netfilter: nft_flowtable.sh
  2024/05/10 20:33:08 socat[12204] E write(7, 0x563feb16a000, 8192): Broken pipe
  FAIL: file mismatch for ns1 -> ns2
  -rw------- 1 root root 37345280 May 10 20:32 /tmp/tmp.Am0yEHhNqI
 ...

Looks like socat gets zapped too quickly, so increase timeout to 1m.

Could also reduce tx file size for KSFT_MACHINE_SLOW, but its preferrable
to have same test for both debug and nondebug.
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20240511064814.561525-1-fw@strlen.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Joachim kindly merged the IPv6 support in
https://github.com/troglobit/mtools/pull/2, so we can just use his
version now. A few more fixes subsequently came in for IPv6, so even
better.

Check that the deployed mtools version is 3.0 or above. Note that the
version check breaks compatibility with my fork where I didn't bump the
version, but I assume that won't be a problem.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20240510112856.1262901-1-vladimir.oltean@nxp.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

There is a spelling mistake in a TH_LOG message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240510084811.3299685-1-colin.i.king@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Setting LED_OFF via brightness_set should deactivate hw control, so make
sure netdev trigger rules also get cleared in that case.
This fixes unwanted restoration of the default netdev trigger rules and
matches the behaviour when using the 'netdev' trigger without any
hardware offloading.

Fixes: 71e79430 ("net: phy: air_en8811h: Add the Airoha EN8811H PHY driver")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://lore.kernel.org/r/5ed8ea615890a91fa4df59a7ae8311bbdf63cdcf.1715248281.git.daniel@makrotopia.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Pablo Neira Ayuso says:

====================
Netfilter updates for net-next

The following patchset contains Netfilter updates for net-next:

Patch #1 skips transaction if object type provides no .update interface.

Patch #2 skips NETDEV_CHANGENAME which is unused.

Patch #3 enables conntrack to handle Multicast Router Advertisements and
	 Multicast Router Solicitations from the Multicast Router Discovery
	 protocol (RFC4286) as untracked opposed to invalid packets.
	 From Linus Luessing.

Patch #4 updates DCCP conntracker to mark invalid as invalid, instead of
	 dropping them, from Jason Xing.

Patch #5 uses NF_DROP instead of -NF_DROP since NF_DROP is 0,
	 also from Jason.

Patch #6 removes reference in netfilter's sysctl documentation on pickup
	 entries which were already removed by Florian Westphal.

Patch #7 removes check for IPS_OFFLOAD flag to disable early drop which
	 allows to evict entries from the conntrack table,
	 also from Florian.

Patches #8 to #16 updates nf_tables pipapo set backend to allocate
	 the datastructure copy on-demand from preparation phase,
	 to better deal with OOM situations where .commit step is too late
	 to fail. Series from Florian Westphal.

Patch #17 adds a selftest with packetdrill to cover conntrack TCP state
	 transitions, also from Florian.

Patch #18 use GFP_KERNEL to clone elements from control plane to avoid
	 quick atomic reserves exhaustion with large sets, reporter refers
	 to million entries magnitude.

* tag 'nf-next-24-05-12' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next:
  netfilter: nf_tables: allow clone callbacks to sleep
  selftests: netfilter: add packetdrill based conntrack tests
  netfilter: nft_set_pipapo: remove dirty flag
  netfilter: nft_set_pipapo: move cloning of match info to insert/removal path
  netfilter: nft_set_pipapo: prepare pipapo_get helper for on-demand clone
  netfilter: nft_set_pipapo: merge deactivate helper into caller
  netfilter: nft_set_pipapo: prepare walk function for on-demand clone
  netfilter: nft_set_pipapo: prepare destroy function for on-demand clone
  netfilter: nft_set_pipapo: make pipapo_clone helper return NULL
  netfilter: nft_set_pipapo: move prove_locking helper around
  netfilter: conntrack: remove flowtable early-drop test
  netfilter: conntrack: documentation: remove reference to non-existent sysctl
  netfilter: use NF_DROP instead of -NF_DROP
  netfilter: conntrack: dccp: try not to drop skb in conntrack
  netfilter: conntrack: fix ct-state for ICMPv6 Multicast Router Discovery
  netfilter: nf_tables: remove NETDEV_CHANGENAME from netdev chain event handler
  netfilter: nf_tables: skip transaction if update object is not implemented
====================

Link: https://lore.kernel.org/r/20240512161436.168973-1-pablo@netfilter.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2024-05-08 (most Intel drivers)

This series contains updates to i40e, iavf, ice, igb, igc, e1000e, and ixgbe
drivers.

Asbjørn Sloth Tønnesen adds checks against supported flower control flags
for i40e, iavf, ice, and igb drivers.

Michal corrects filters removed during eswitch release for ice.

Corinna Vinschen defers PTP initialization to later in probe so that
netdev log entry is initialized on igc.

Ilpo Järvinen removes a couple of unused, duplicate defines on
e1000e and ixgbe.

* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
  net: e1000e & ixgbe: Remove PCI_HEADER_TYPE_MFD duplicates
  igc: fix a log entry using uninitialized netdev
  ice: remove correct filters during eswitch release
  igb: flower: validate control flags
  ice: flower: validate control flags
  iavf: flower: validate control flags
  i40e: flower: validate control flags
====================

Link: https://lore.kernel.org/r/20240508173342.2760994-1-anthony.l.nguyen@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Asbjørn Sloth Tønnesen says:

====================
net: qede: convert filter code to use extack

This series converts the filter code in the qede driver
to use NL_SET_ERR_MSG_*(extack, ...) for error handling.

Patch 1-12 converts qede_parse_flow_attr() to use extack,
along with all it's static helper functions.

qede_parse_flow_attr() is used in two places:
- qede_add_tc_flower_fltr()
- qede_flow_spec_to_rule()

In the latter call site extack is faked in the same way as
is done in mlxsw (patch 12).

While the conversion is going on, some error messages are silenced
in between patch 1-12. If wanted could squash patch 1-12 in a v3, but
I felt that it would be easier to review as 12 more trivial patches.

Patch 13 and 14, finishes up by converting qede_parse_actions(),
and ensures that extack is propagated to it, in both call contexts.

v1: https://lore.kernel.org/netdev/20240507104421.1628139-1-ast@fiberby.net/
====================

Link: https://lore.kernel.org/r/20240508143404.95901-1-ast@fiberby.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Convert DP_NOTICE/DP_INFO to NL_SET_ERR_MSG_MOD.

Keep edev around for use with QEDE_RSS_COUNT().

Only compile tested.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240508143404.95901-15-ast@fiberby.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Pass extack to qede_flow_spec_validate() when called in
qede_flow_spec_to_rule().

Pass extack to qede_parse_actions().

Not converting qede_flow_spec_validate() to use extack for
errors, as it's only called from qede_flow_spec_to_rule(),
where extack is faked into a DP_NOTICE anyway, so opting to
keep DP_VERBOSE/DP_NOTICE usage.

Only compile tested.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240508143404.95901-14-ast@fiberby.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Since qede_parse_flow_attr() now does error reporting
through extack, then give it a fake extack and extract the
error message afterwards if one was set.

The extracted error message is then passed on through
DP_NOTICE(), including messages that was earlier issued
with DP_INFO().

This fake extack approach is already used by
mlxsw_env_linecard_modules_power_mode_apply() in
drivers/net/ethernet/mellanox/mlxsw/core_env.c

Only compile tested.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240508143404.95901-13-ast@fiberby.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Convert qede_parse_flow_attr() to take extack,
and drop the edev argument.

Convert DP_NOTICE calls to use NL_SET_ERR_MSG_* instead.

Pass extack in calls to qede_flow_parse_{tcp,udp}_v{4,6}().

In calls to qede_parse_flow_attr(), if extack is
unavailable, then use NULL for now, until a
subsequent patch makes extack available.

Only compile tested.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240508143404.95901-12-ast@fiberby.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Define extack locally, to reduce line lengths and aid future users.

Only compile tested.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240508143404.95901-11-ast@fiberby.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Convert qede_flow_parse_udp_v4() to take extack,
and drop the edev argument.

Pass extack in call to qede_flow_parse_v4_common().

In call to qede_flow_parse_udp_v4(), use NULL as extack
for now, until a subsequent patch makes extack available.

Only compile tested.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240508143404.95901-10-ast@fiberby.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Convert qede_flow_parse_udp_v6() to take extack,
and drop the edev argument.

Pass extack in call to qede_flow_parse_v6_common().

In call to qede_flow_parse_udp_v6(), use NULL as extack
for now, until a subsequent patch makes extack available.

Only compile tested.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240508143404.95901-9-ast@fiberby.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Convert qede_flow_parse_tcp_v4() to take extack,
and drop the edev argument.

Pass extack in call to qede_flow_parse_v4_common().

In call to qede_flow_parse_tcp_v4(), use NULL as extack
for now, until a subsequent patch makes extack available.

Only compile tested.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240508143404.95901-8-ast@fiberby.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Convert qede_flow_parse_tcp_v6() to take extack,
and drop the edev argument.

Pass extack in call to qede_flow_parse_v6_common().

In call to qede_flow_parse_tcp_v6(), use NULL as extack
for now, until a subsequent patch makes extack available.

Only compile tested.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240508143404.95901-7-ast@fiberby.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Convert qede_flow_parse_v4_common() to take extack,
and drop the edev argument.

Convert DP_NOTICE call to use NL_SET_ERR_MSG_MOD instead.

Pass extack in calls to qede_flow_parse_ports() and
qede_set_v4_tuple_to_profile().

In calls to qede_flow_parse_v4_common(), use NULL as extack
for now, until a subsequent patch makes extack available.

Only compile tested.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240508143404.95901-6-ast@fiberby.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Convert qede_flow_parse_v6_common() to take extack,
and drop the edev argument.

Convert DP_NOTICE call to use NL_SET_ERR_MSG_MOD instead.

Pass extack in calls to qede_flow_parse_ports() and
qede_set_v6_tuple_to_profile().

In calls to qede_flow_parse_v6_common(), use NULL as extack
for now, until a subsequent patch makes extack available.

Only compile tested.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240508143404.95901-5-ast@fiberby.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Convert qede_set_v4_tuple_to_profile() to take extack,
and drop the edev argument.

Convert DP_INFO call to use NL_SET_ERR_MSG_MOD instead.

In calls to qede_set_v4_tuple_to_profile(), use NULL as extack
for now, until a subsequent patch makes extack available.

Only compile tested.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240508143404.95901-4-ast@fiberby.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Convert qede_set_v6_tuple_to_profile() to take extack,
and drop the edev argument.

Convert DP_INFO call to use NL_SET_ERR_MSG_MOD instead.

In calls to qede_set_v6_tuple_to_profile(), use NULL as extack
for now, until a subsequent patch makes extack available.

Only compile tested.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240508143404.95901-3-ast@fiberby.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Convert qede_flow_parse_ports to use extack,
and drop the edev argument.

Convert DP_NOTICE call to use NL_SET_ERR_MSG_MOD instead.

In calls to qede_flow_parse_ports(), use NULL as extack
for now, until a subsequent patch makes extack available.

Only compile tested.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240508143404.95901-2-ast@fiberby.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Some usb drivers try to set small skb->truesize and break
core networking stacks.

In this patch, I removed one of the skb->truesize override.

I also replaced one skb_clone() by an allocation of a fresh
and small skb, to get minimally sized skbs, like we did
in commit 1e2c6117 ("net: cdc_ncm: reduce skb truesize
in rx path") and 4ce62d5b ("net: usb: ax88179_178a:
stop lying about skb->truesize")

v3: also fix a sparse error ( https://lore.kernel.org/oe-kbuild-all/202405091310.KvncIecx-lkp@intel.com/ )
v2: leave the skb_trim() game because smsc95xx_rx_csum_offload()
    needs the csum part. (Jakub)
    While we are it, use get_unaligned() in smsc95xx_rx_csum_offload().

Fixes: 2f7ca802 ("net: Add SMSC LAN9500 USB2.0 10/100 ethernet adapter driver")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Steve Glendinning <steve.glendinning@shawell.net>
Cc: UNGLinuxDriver@microchip.com
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240509083313.2113832-1-edumazet@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

There is a spelling mistake in a dev_err message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240509065023.3033397-1-colin.i.king@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Commit 1af2dfac ("af_unix: Don't access successor in unix_del_edges()
during GC.") fixed use-after-free by avoid accessing edge->successor while
GC is in progress.

However, there could be a small race window where another process could
call unix_del_edges() while gc_in_progress is true and __skb_queue_purge()
is on the way.

So, we need another marker for struct scm_fp_list which indicates if the
skb is garbage-collected.

This patch adds dead flag in struct scm_fp_list and set it true before
calling __skb_queue_purge().

Fixes: 1af2dfac ("af_unix: Don't access successor in unix_del_edges() during GC.")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/20240508171150.50601-1-kuniyu@amazon.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

linux/gpio.h is deprecated and subject to remove.
The driver doesn't use it directly, replace it
with what is really being used.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240508114519.972082-1-andriy.shevchenko@linux.intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Real number of Transmit queues are incremented when user enables HTB
class and vice versa. Depending on SKB priority driver returns transmit
queue (Txq). Transmit queues and Send queues are one-to-one mapped.

In few scenarios, Driver is returning transmit queue value which is
greater than real number of transmit queue and Stack detects this as
error and overwrites transmit queue value.

For example
user has added two classes and real number of queues are incremented
accordingly
- tc class add dev eth1 parent 1: classid 1:1 htb
      rate 100Mbit ceil 100Mbit prio 1 quantum 1024
- tc class add dev eth1 parent 1: classid 1:2 htb
      rate 100Mbit ceil 200Mbit prio 7 quantum 1024

now if user deletes the class with id 1:1, driver decrements the real
number of queues
- tc class del dev eth1 classid 1:1

But for the class with id 1:2, driver is returning transmit queue
value which is higher than real number of transmit queue leading
to below error

eth1 selects TX queue x, but real number of TX queues is x

This patch solves the problem by assigning deleted class transmit
queue/send queue to active class.
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240508070935.11501-1-hkelam@marvell.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Simon Horman says:

====================
gve: Minor cleanups

This short patchset provides two minor cleanups for the gve driver.

These were found by tooling as mentioned in each patch,
and otherwise by inspection.

No change in run time behaviour is intended.
Each patch is compile tested only.

v1: https://lore.kernel.org/r/20240503-gve-comma-v1-0-b50f965694ef@kernel.org
====================

Link: https://lore.kernel.org/r/20240508-gve-comma-v2-0-1ac919225f13@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Make use of standard helpers to simplify filling in stats strings.

The first two ethtool_puts() changes address the following fortification
warnings flagged by W=1 builds with clang-18. (The last ethtool_puts
change does not because the warning relates to writing beyond the first
element of an array, and gve_gstrings_priv_flags only has one element.)

.../fortify-string.h:562:4: warning: call to '__read_overflow2_field' declared with 'warning' attribute: detected read beyond size of field (2nd parameter); maybe use struct_group()? [-Wattribute-warning]
  562 |                         __read_overflow2_field(q_size_field, size);
      |                         ^
.../fortify-string.h:562:4: warning: call to '__read_overflow2_field' declared with 'warning' attribute: detected read beyond size of field (2nd parameter); maybe use struct_group()? [-Wattribute-warning]

Likewise, the same changes resolve the same problems flagged by Smatch.

.../gve_ethtool.c:100 gve_get_strings() error: __builtin_memcpy() '*gve_gstrings_main_stats' too small (32 vs 576)
.../gve_ethtool.c:120 gve_get_strings() error: __builtin_memcpy() '*gve_gstrings_adminq_stats' too small (32 vs 512)

Compile tested only.
Reviewed-by: Shailend Chand <shailend@google.com>
Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com>
Signed-off-by: Simon Horman <horms@kernel.org>
Acked-by: Justin Stitt <justinstitt@google.com>
Link: https://lore.kernel.org/r/20240508-gve-comma-v2-2-1ac919225f13@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Although it does not seem to have any untoward side-effects,
the use of ';' to separate to assignments seems more appropriate than ','.

Flagged by clang-18 -Wcomma

No functional change intended.
Compile tested only.
Reviewed-by: Shailend Chand <shailend@google.com>
Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com>
Signed-off-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240508-gve-comma-v2-1-1ac919225f13@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Slow machines can delay scheduling of the packets for milliseconds.
Increase the delay to 8ms if KSFT_MACHINE_SLOW. Try to limit the
variability by moving setsockopts earlier (before we read time).

This fixes the "TXTIME rel" failures on debug kernels, like:

  Case ICMPv4  - TXTIME rel returned '', expected 'OK'
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20240510005705.43069-2-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

On slow machines the SND timestamp sometimes doesn't arrive before
we quit. The test only waits as long as the packet delay, so it's
easy for a race condition to happen.

Double the wait but do a bit of polling, once the SND timestamp
arrives there's no point to wait any longer.

This fixes the "TXTIME abs" failures on debug kernels, like:

   Case ICMPv4  - TXTIME abs returned '', expected 'OK'
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20240510005705.43069-1-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The pointer delcaration was missing the __free(kfree).

Fixes: ff7c7d9f ("virtio_net: Remove command data from control_buf")
Reported-by: Jens Axboe <axboe@kernel.dk>
Closes: https://lore.kernel.org/netdev/0674ca1b-020f-4f93-94d0-104964566e3f@kernel.dk/Signed-off-by: Daniel Jurgens <danielj@nvidia.com>
Tested-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://lore.kernel.org/r/20240509183634.143273-1-danielj@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Clang build brings a warning:

    ../drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.c:133:12: warning:
    comparison of distinct pointer types ('typeof (tmo_us) *' (aka 'unsigned
    int *') and 'typeof (65535) *' (aka 'int *'))
    [-Wcompare-distinct-pointer-types]
      133 |                 tmo_us = min(tmo_us, BNXT_PTP_QTS_MAX_TMO_US);
          |                          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Fix it by specifying proper type for BNXT_PTP_QTS_MAX_TMO_US.

Fixes: 7de3c221 ("bnxt_en: Add a timeout parameter to bnxt_hwrm_port_ts_query()")
Signed-off-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20240509151833.12579-1-vadim.fedorenko@linux.devSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Pablo neira Ayuso says:

====================
gtp pull request 24-05-07

This v3 includes:
- fix for clang uninitialized variable per Jakub.
- address Smatch and Coccinelle reports per Simon
- remove inline in new IPv6 support per Simon
- fix memleaks in netlink control plane per Simon
-o-

The following patchset contains IPv6 GTP driver support for net-next,
this also includes IPv6 over IPv4 and vice-versa:

Patch #1 removes a unnecessary stack variable initialization in the
         socket routine.

Patch #2 deals with GTP extension headers. This variable length extension
         header to decapsulate packets accordingly. Otherwise, packets are
         dropped when these extension headers are present which breaks
         interoperation with other non-Linux based GTP implementations.

Patch #3 prepares for IPv6 support by moving IPv4 specific fields in PDP
         context objects to a union.

Patch #4 adds IPv6 support while retaining backward compatibility.
         Three new attributes allows to declare an IPv6 GTP tunnel
         GTPA_FAMILY, GTPA_PEER_ADDR6 and GTPA_MS_ADDR6 as well as
         IFLA_GTP_LOCAL6 to declare the IPv6 GTP UDP socket. Up to this
         patch, only IPv6 outer in IPv6 inner is supported.

Patch #5 uses IPv6 address /64 prefix for UE/MS in the inner headers.
         Unlike IPv4, which provides a 1:1 mapping between UE/MS,
         IPv6 tunnel encapsulates traffic for /64 address as specified
         by 3GPP TS. Patch has been split from Patch #4 to highlight
         this behaviour.

Patch #6 passes up IPv6 link-local traffic, such as IPv6 SLAAC, for
         handling to userspace so they are handled as control packets.

Patch #7 prepares to allow for GTP IPv4 over IPv6 and vice-versa by
         moving IP specific debugging out of the function to build
         IPv4 and IPv6 GTP packets.

Patch #8 generalizes TOS/DSCP handling following similar approach as
         in the existing iptunnel infrastructure.

Patch #9 adds a helper function to build an IPv4 GTP packet in the outer
         header.

Patch #10 adds a helper function to build an IPv6 GTP packet in the outer
          header.

Patch #11 adds support for GTP IPv4-over-IPv6 and vice-versa.

Patch #12 allows to use the same TID/TEID (tunnel identifier) for inner
          IPv4 and IPv6 packets for better UE/MS dual stack integration.

This series integrates with the osmocom.org project CI and TTCN-3 test
infrastructure (Oliver Smith) as well as the userspace libgtpnl library.

Thanks to Harald Welte, Oliver Smith and Pau Espin for reviewing and
providing feedback through the osmocom.org redmine platform to make this
happen.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Sven Auhagen reports transaction failures with following error:
  ./main.nft:13:1-26: Error: Could not process rule: Cannot allocate memory
  percpu: allocation failed, size=16 align=8 atomic=1, atomic alloc failed, no space left

This points to failing pcpu allocation with GFP_ATOMIC flag.
However, transactions happen from user context and are allowed to sleep.

One case where we can call into percpu allocator with GFP_ATOMIC is
nft_counter expression.

Normally this happens from control plane, so this could use GFP_KERNEL
instead.  But one use case, element insertion from packet path,
needs to use GFP_ATOMIC allocations (nft_dynset expression).

At this time, .clone callbacks always use GFP_ATOMIC for this reason.

Add gfp_t argument to the .clone function and pass GFP_KERNEL or
GFP_ATOMIC flag depending on context, this allows all clone memory
allocations to sleep for the normal (transaction) case.

Cc: Sven Auhagen <sven.auhagen@voleatech.de>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Add a new test script that uses packetdrill tool to exercise conntrack
state machine.

Needs ip/ip6tables and conntrack tool (to check if we have an entry in
the expected state).

Test cases added here cover following scenarios:
1. already-acked (retransmitted) packets are not tagged as INVALID
2. RST packet coming when conntrack is already closing (FIN/CLOSE_WAIT)
  transitions conntrack to CLOSE even if the RST is not an exact match
3. RST packets with out-of-window sequence numbers are marked as INVALID
4. SYN+Challenge ACK: check that challenge ack is allowed to pass
5. Old SYN/ACK: check conntrack handles the case where SYN is answered
  with SYN/ACK for an old, previous connection attempt
6. Check SYN reception while in ESTABLISHED state generates a challenge
   ack, RST response clears 'outdated' state + next SYN retransmit gets
   us into 'SYN_RECV' conntrack state.

Tests get run twice, once with ipv4 and once with ipv6.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

After previous change:
 ->clone exists: ->dirty is always true
 ->clone == NULL ->dirty is always false

So remove this flag.
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

This set type keeps two copies of the sets' content,
   priv->match (live version, used to match from packet path)
   priv->clone (work-in-progress version of the 'future' priv->match).

All additions and removals are done on priv->clone.  When transaction
completes, priv->clone becomes priv->match and a new clone is allocated
for use by next transaction.

Problem is that the cloning requires GFP_KERNEL allocations but we
cannot fail at either commit or abort time.

This patch defers the clone until we get an insertion or removal
request.  This allows us to handle OOM situations correctly.

This also allows to remove ->dirty in a followup change:

If ->clone exists, ->dirty is always true
If ->clone is NULL, ->dirty is always false, no elements were added
or removed (except catchall elements which are external to the specific
set backend).
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

The helper uses priv->clone unconditionally which will fail once we do
the clone conditionally on first insert or removal.

'nft get element' from userspace needs to use priv->match since this
runs from rcu read side lock section.

Prepare for this by passing the match backend data as argument.
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>