The VMX capability MSRs advertise the set of features the KVM virtual
CPU can support. This set of features varies across different host CPUs
and KVM versions. This patch aims to addresses both sources of
differences, allowing VMs to be migrated across CPUs and KVM versions
without guest-visible changes to these MSRs. Note that cross-KVM-
version migration is only supported from this point forward.

When the VMX capability MSRs are restored, they are audited to check
that the set of features advertised are a subset of what KVM and the
CPU support.

Since the VMX capability MSRs are read-only, they do not need to be on
the default MSR save/restore lists. The userspace hypervisor can set
the values of these MSRs or read them from KVM at VCPU creation time,
and restore the same value after every save/restore.
Signed-off-by: David Matlack <dmatlack@google.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>

The "non-true" VMX capability MSRs can be generated from their "true"
counterparts, by OR-ing the default1 bits. The default1 bits are fixed
and defined in the SDM.

Since we can generate the non-true VMX MSRs from the true versions,
there's no need to store both in struct nested_vmx. This also lets
userspace avoid having to restore the non-true MSRs.

Note this does not preclude emulating MSR_IA32_VMX_BASIC[55]=0. To do so,
we simply need to set all the default1 bits in the true MSRs (such that
the true MSRs and the generated non-true MSRs are equal).
Signed-off-by: David Matlack <dmatlack@google.com>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>

The trap flag stays set until software clears it.
Signed-off-by: Kyle Huey <khuey@kylehuey.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>

kvm_skip_emulated_instruction calls both
kvm_x86_ops->skip_emulated_instruction and kvm_vcpu_check_singlestep,
skipping the emulated instruction and generating a trap if necessary.

Replacing skip_emulated_instruction calls with
kvm_skip_emulated_instruction is straightforward, except for:

- ICEBP, which is already inside a trap, so avoid triggering another trap.
- Instructions that can trigger exits to userspace, such as the IO insns,
  MOVs to CR8, and HALT. If kvm_skip_emulated_instruction does trigger a
  KVM_GUESTDBG_SINGLESTEP exit, and the handling code for
  IN/OUT/MOV CR8/HALT also triggers an exit to userspace, the latter will
  take precedence. The singlestep will be triggered again on the next
  instruction, which is the current behavior.
- Task switch instructions which would require additional handling (e.g.
  the task switch bit) and are instead left alone.
- Cases where VMLAUNCH/VMRESUME do not proceed to the next instruction,
  which do not trigger singlestep traps as mentioned previously.
Signed-off-by: Kyle Huey <khuey@kylehuey.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>

We can't return both the pass/fail boolean for the vmcs and the upcoming
continue/exit-to-userspace boolean for skip_emulated_instruction out of
nested_vmx_check_vmcs, so move skip_emulated_instruction out of it instead.

Additionally, VMENTER/VMRESUME only trigger singlestep exceptions when
they advance the IP to the following instruction, not when they a) succeed,
b) fail MSR validation or c) throw an exception. Add a separate call to
skip_emulated_instruction that will later not be converted to the variant
that checks the singlestep flag.
Signed-off-by: Kyle Huey <khuey@kylehuey.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>

The functions being moved ahead of skip_emulated_instruction here don't
need updated IPs, and skipping the emulated instruction at the end will
make it easier to return its value.
Signed-off-by: Kyle Huey <khuey@kylehuey.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>

Once skipping the emulated instruction can potentially trigger an exit to
userspace (via KVM_GUESTDBG_SINGLESTEP) kvm_emulate_cpuid will need to
propagate a return value.
Signed-off-by: Kyle Huey <khuey@kylehuey.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>

Eliminate merge conflict between 9e5f6884 and ebe4535f.

This moves the prototypes for functions that are only called from
assembler code out of asm/asm-prototypes.h into asm/kvm_ppc.h.
The prototypes were added in commit ebe4535f ("KVM: PPC:
Book3S HV: sparse: prototypes for functions called from assembler",
2016-10-10), but given that the functions are KVM functions,
having them in a KVM header will be better for long-term
maintenance.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>

PPC KVM update for 4.10:

 * Support for KVM guests on POWER9 using the hashed page table MMU.
 * Updates and improvements to the halt-polling support on PPC, from
   Suraj Jitindar Singh.
 * An optimization to speed up emulated MMIO, from Yongji Xie.
 * Various other minor cleanups.

KVM: s390: Changes for 4.10 (via kvm/next)

Two small optimizations to not do register reloading in
vcpu_put/get, instead do it in the ioctl path. This reduces
the overhead for schedule-intense workload that does not
exit to QEMU. (e.g. KVM guest with eventfd/irqfd that
does a lot of context switching with vhost or iothreads).

There is currently no documentation about the halt polling capabilities
of the kvm module. Add some documentation describing the mechanism as well
as the module parameters to all better understanding of how halt polling
should be used and the effect of tuning the module parameters.
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>

Fix comment block to match kernel comment style.

Fix print format from signed to unsigned.
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>

KVM_HALT_POLL_NS_DEFAULT is an arch specific constant which sets the
default value of the halt_poll_ns kvm module parameter which determines
the global maximum halt polling interval.

The current value for powerpc is 500000 (500us) which means that any
repetitive workload with a period of less than that can drive the cpu
usage to 100% where it may have been mostly idle without halt polling.
This presents the possibility of a large increase in power usage with
a comparatively small performance benefit.

Reduce the default to 10000 (10us) and a user can tune this themselves
to set their affinity for halt polling based on the trade off between power
and performance which they are willing to make.
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>

The kvm module parameter halt_poll_ns defines the global maximum halt
polling interval and can be dynamically changed by writing to the
/sys/module/kvm/parameters/halt_poll_ns sysfs file. However in kvm-hv
this module parameter value is only ever checked when we grow the current
polling interval for the given vcore. This means that if we decrease the
halt_poll_ns value below the current polling interval we won't see any
effect unless we try to grow the polling interval above the new max at some
point or it happens to be shrunk below the halt_poll_ns value.

Update the halt polling code so that we always check for a new module param
value of halt_poll_ns and set the current halt polling interval to it if
it's currently greater than the new max. This means that it's redundant to
also perform this check in the grow_halt_poll_ns() function now.
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>

The previous patch exported the variables which back the module parameters
of the generic kvm module. Now use these variables in the kvm-hv module
so that any change to the generic module parameters will also have the
same effect for the kvm-hv module. This removes the duplication of the
kvm module parameters which was redundant and should reduce confusion when
tuning them.
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>

The kvm module has the parameters halt_poll_ns, halt_poll_ns_grow, and
halt_poll_ns_shrink. Halt polling was recently added to the powerpc kvm-hv
module and these parameters were essentially duplicated for that. There is
no benefit to this duplication and it can lead to confusion when trying to
tune halt polling.

Thus move the definition of these variables to kvm_host.h and export them.
This will allow the kvm-hv module to use the same module parameters by
accessing these variables, which will be implemented in the next patch,
meaning that they will no longer be duplicated.
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>

Update the I/O interception support to add the kvm_fast_pio_in function
to speed up the in instruction similar to the out instruction.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>

AMD hardware adds two additional bits to aid in nested page fault handling.

Bit 32 - NPF occurred while translating the guest's final physical address
Bit 33 - NPF occurred while translating the guest page tables

The guest page tables fault indicator can be used as an aid for nested
virtualization. Using V0 for the host, V1 for the first level guest and
V2 for the second level guest, when both V1 and V2 are using nested paging
there are currently a number of unnecessary instruction emulations. When
V2 is launched shadow paging is used in V1 for the nested tables of V2. As
a result, KVM marks these pages as RO in the host nested page tables. When
V2 exits and we resume V1, these pages are still marked RO.

Every nested walk for a guest page table is treated as a user-level write
access and this causes a lot of NPFs because the V1 page tables are marked
RO in the V0 nested tables. While executing V1, when these NPFs occur KVM
sees a write to a read-only page, emulates the V1 instruction and unprotects
the page (marking it RW). This patch looks for cases where we get a NPF due
to a guest page table walk where the page was marked RO. It immediately
unprotects the page and resumes the guest, leading to far fewer instruction
emulations when nested virtualization is used.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>

At present KVM on powerpc always reports KVM_CAP_PPC_ALLOC_HTAB as enabled.
However, the ioctl() it advertises (KVM_PPC_ALLOCATE_HTAB) only actually
works on KVM HV.  On KVM PR it will fail with ENOTTY.

QEMU already has a workaround for this, so it's not breaking things in
practice, but it would be better to advertise this correctly.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>

The KVM_PPC_PVINFO_FLAGS_EV_IDLE macro defines a bit for use in the flags
field of struct kvm_ppc_pvinfo.  However, changes since that was introduced
have moved it away from that structure definition, which is confusing.

Move it back next to the structure it belongs with.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>

This adds the "again" parameter to the dummy version of
kvmppc_check_passthru(), so that it matches the real version.
This fixes compilation with CONFIG_BOOK3S_64_HV set but
CONFIG_KVM_XICS=n.

This includes asm/smp.h in book3s_hv_builtin.c to fix compilation
with CONFIG_SMP=n.  The explicit inclusion is necessary to provide
definitions of hard_smp_processor_id() and get_hard_smp_processor_id()
in UP configs.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>

The function kvmppc_set_arch_compat() is used to determine the value of the
processor compatibility register (PCR) for a guest running in a given
compatibility mode. There is currently no support for v3.00 of the ISA.

Add support for v3.00 of the ISA which adds an ISA v2.07 compatilibity mode
to the PCR.

We also add a check to ensure the processor we are running on is capable of
emulating the chosen processor (for example a POWER7 cannot emulate a
POWER8, similarly with a POWER8 and a POWER9).

Based on work by: Paul Mackerras <paulus@ozlabs.org>

[paulus@ozlabs.org - moved dummy PCR_ARCH_300 definition here; set
 guest_pcr_bit when arch_compat == 0, added comment.]
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>

With POWER9, each CPU thread has its own MMU context and can be
in the host or a guest independently of the other threads; there is
still however a restriction that all threads must use the same type
of address translation, either radix tree or hashed page table (HPT).

Since we only support HPT guests on a HPT host at this point, we
can treat the threads as being independent, and avoid all of the
work of coordinating the CPU threads.  To make this simpler, we
introduce a new threads_per_vcore() function that returns 1 on
POWER9 and threads_per_subcore on POWER7/8, and use that instead
of threads_per_subcore or threads_per_core in various places.

This also changes the value of the KVM_CAP_PPC_SMT capability on
POWER9 systems from 4 to 1, so that userspace will not try to
create VMs with multiple vcpus per vcore.  (If userspace did create
a VM that thought it was in an SMT mode, the VM might try to use
the msgsndp instruction, which will not work as expected.  In
future it may be possible to trap and emulate msgsndp in order to
allow VMs to think they are in an SMT mode, if only for the purpose
of allowing migration from POWER8 systems.)

With all this, we can now run guests on POWER9 as long as the host
is running with HPT translation.  Since userspace currently has no
way to request radix tree translation for the guest, the guest has
no choice but to use HPT translation.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>

The new XIVE interrupt controller on POWER9 can direct external
interrupts to the hypervisor or the guest.  The interrupts directed to
the hypervisor are controlled by an LPCR bit called LPCR_HVICE, and
come in as a "hypervisor virtualization interrupt".  This sets the
LPCR bit so that hypervisor virtualization interrupts can occur while
we are in the guest.  We then also need to cope with exiting the guest
because of a hypervisor virtualization interrupt.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>

POWER9 replaces the various power-saving mode instructions on POWER8
(doze, nap, sleep and rvwinkle) with a single "stop" instruction, plus
a register, PSSCR, which controls the depth of the power-saving mode.
This replaces the use of the nap instruction when threads are idle
during guest execution with the stop instruction, and adds code to
set PSSCR to a value which will allow an SMT mode switch while the
thread is idle (given that the core as a whole won't be idle in these
cases).
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>

POWER9 includes a new interrupt controller, called XIVE, which is
quite different from the XICS interrupt controller on POWER7 and
POWER8 machines.  KVM-HV accesses the XICS directly in several places
in order to send and clear IPIs and handle interrupts from PCI
devices being passed through to the guest.

In order to make the transition to XIVE easier, OPAL firmware will
include an emulation of XICS on top of XIVE.  Access to the emulated
XICS is via OPAL calls.  The one complication is that the EOI
(end-of-interrupt) function can now return a value indicating that
another interrupt is pending; in this case, the XIVE will not signal
an interrupt in hardware to the CPU, and software is supposed to
acknowledge the new interrupt without waiting for another interrupt
to be delivered in hardware.

This adapts KVM-HV to use the OPAL calls on machines where there is
no XICS hardware.  When there is no XICS, we look for a device-tree
node with "ibm,opal-intc" in its compatible property, which is how
OPAL indicates that it provides XICS emulation.

In order to handle the EOI return value, kvmppc_read_intr() has
become kvmppc_read_one_intr(), with a boolean variable passed by
reference which can be set by the EOI functions to indicate that
another interrupt is pending.  The new kvmppc_read_intr() keeps
calling kvmppc_read_one_intr() until there are no more interrupts
to process.  The return value from kvmppc_read_intr() is the
largest non-zero value of the returns from kvmppc_read_one_intr().
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>

On POWER9, the msgsnd instruction is able to send interrupts to
other cores, as well as other threads on the local core.  Since
msgsnd is generally simpler and faster than sending an IPI via the
XICS, we use msgsnd for all IPIs sent by KVM on POWER9.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>

POWER9 adds new capabilities to the tlbie (TLB invalidate entry)
and tlbiel (local tlbie) instructions.  Both instructions get a
set of new parameters (RIC, PRS and R) which appear as bits in the
instruction word.  The tlbiel instruction now has a second register
operand, which contains a PID and/or LPID value if needed, and
should otherwise contain 0.

This adapts KVM-HV's usage of tlbie and tlbiel to work on POWER9
as well as older processors.  Since we only handle HPT guests so
far, we need RIC=0 PRS=0 R=0, which ends up with the same instruction
word as on previous processors, so we don't need to conditionally
execute different instructions depending on the processor.

The local flush on first entry to a guest in book3s_hv_rmhandlers.S
is a loop which depends on the number of TLB sets.  Rather than
using feature sections to set the number of iterations based on
which CPU we're on, we now work out this number at VM creation time
and store it in the kvm_arch struct.  That will make it possible to
get the number from the device tree in future, which will help with
compatibility with future processors.

Since mmu_partition_table_set_entry() does a global flush of the
whole LPID, we don't need to do the TLB flush on first entry to the
guest on each processor.  Therefore we don't set all bits in the
tlb_need_flush bitmap on VM startup on POWER9.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>

This adds code to handle two new guest-accessible special-purpose
registers on POWER9: TIDR (thread ID register) and PSSCR (processor
stop status and control register).  They are context-switched
between host and guest, and the guest values can be read and set
via the one_reg interface.

The PSSCR contains some fields which are guest-accessible and some
which are only accessible in hypervisor mode.  We only allow the
guest-accessible fields to be read or set by userspace.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>

Some special-purpose registers that were present and accessible
by guests on POWER8 no longer exist on POWER9, so this adds
feature sections to ensure that we don't try to context-switch
them when going into or out of a guest on POWER9.  These are
all relatively obscure, rarely-used registers, but we had to
context-switch them on POWER8 to avoid creating a covert channel.
They are: SPMC1, SPMC2, MMCRS, CSIGR, TACR, TCSCR, and ACOP.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>

On POWER9, the SDR1 register (hashed page table base address) is no
longer used, and instead the hardware reads the HPT base address
and size from the partition table.  The partition table entry also
contains the bits that specify the page size for the VRMA mapping,
which were previously in the LPCR.  The VPM0 bit of the LPCR is
now reserved; the processor now always uses the VRMA (virtual
real-mode area) mechanism for guest real-mode accesses in HPT mode,
and the RMO (real-mode offset) mechanism has been dropped.

When entering or exiting the guest, we now only have to set the
LPIDR (logical partition ID register), not the SDR1 register.
There is also no requirement now to transition via a reserved
LPID value.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>

This adapts the KVM-HV hashed page table (HPT) code to read and write
HPT entries in the new format defined in Power ISA v3.00 on POWER9
machines.  The new format moves the B (segment size) field from the
first doubleword to the second, and trims some bits from the AVA
(abbreviated virtual address) and ARPN (abbreviated real page number)
fields.  As far as possible, the conversion is done when reading or
writing the HPT entries, and the rest of the code continues to use
the old format.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>

This merges in the ppc-kvm topic branch to get changes to
arch/powerpc code that are necessary for adding POWER9 KVM support.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>

Define and set the POWER9 HFSCR doorbell bit so that guests can use
msgsndp.

ISA 3.0 calls this MSGP, so name it accordingly in the code.
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

ISA 3.0 defines a new PECE (Power-saving mode Exit Cause Enable) field
in the LPCR (Logical Partitioning Control Register), called
LPCR_PECE_HVEE (Hypervisor Virtualization Exit Enable).

KVM code will need to know about this bit, so add a definition for it.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

ISA 3.00 adds the logical PVR value 0x0f000005, so add a definition for
this.

Define PCR_ARCH_207 to reflect ISA 2.07 compatibility mode in the processor
compatibility register (PCR).

[paulus@ozlabs.org - moved dummy PCR_ARCH_300 value into next patch]
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

This defines real-mode versions of opal_int_get_xirr(), opal_int_eoi()
and opal_int_set_mfrr(), for use by KVM real-mode code.

It also exports opal_int_set_mfrr() so that the modular part of KVM
can use it to send IPIs.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

POWER9 requires the host to set up a partition table, which is a
table in memory indexed by logical partition ID (LPID) which
contains the pointers to page tables and process tables for the
host and each guest.

This factors out the initialization of the partition table into
a single function.  This code was previously duplicated between
hash_utils_64.c and pgtable-radix.c.

This provides a function for setting a partition table entry,
which is used in early MMU initialization, and will be used by
KVM whenever a guest is created.  This function includes a tlbie
instruction which will flush all TLB entries for the LPID and
all caches of the partition table entry for the LPID, across the
system.

This also moves a call to memblock_set_current_limit(), which was
in radix_init_partition_table(), but has nothing to do with the
partition table.  By analogy with the similar code for hash, the
call gets moved to near the end of radix__early_init_mmu().  It
now gets called when running as a guest, whereas previously it
would only be called if the kernel is running as the host.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Right now we switch the host fprs/vrs in kvm_arch_vcpu_load and switch
back in kvm_arch_vcpu_put. This process is already optimized
since commit 9977e886 ("s390/kernel: lazy restore fpu registers")
avoiding double save/restores on schedule. We still reload the pointers
and test the guest fpc on each context switch, though.

We can minimize the cost of vcpu_load/put by doing the test in the
VCPU_RUN ioctl itself. As most VCPU threads almost never exit to
userspace in the common fast path, this allows to avoid this overhead
for the common case (eventfd driven I/O, all exits including sleep
handled in the kernel) - making kvm_arch_vcpu_load/put basically
disappear in perf top.

Also adapt the fpu get/set ioctls.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>