- 08 Jan, 2014 18 commits
-
-
Wei Yongjun authored
Remove duplicated include. Signed-off-by:
Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Colin Leitner authored
Genuine FTDI chips support only CS7/8. A previous fix in commit 8704211f ("USB: ftdi_sio: fixed handling of unsupported CSIZE setting") enforced this limitation and reported it back to userspace. However, certain types of smartcard readers depend on specific driver behaviour that requests 0 data bits (not 5) to change into a different operating mode if CS5 has been set. This patch reenables this behaviour for all FTDI devices. Tagged to be added to stable, because it affects a lot of users of embedded systems which rely on these readers to work properly. Cc: stable <stable@vger.kernel.org> Reported-by:
Heinrich Siebmanns <H.Siebmanns@t-online.de> Tested-by:
Colin Leitner <colin.leitner@gmail.com> Signed-off-by:
Johan Hovold <jhovold@gmail.com> Signed-off-by:
-
Peter Chen authored
Due to imx28 needs ARM swp instruction for writing, we set CI_HDRC_IMX28_WRITE_FIX for imx28. Signed-off-by:
Peter Chen <peter.chen@freescale.com> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Tested-by:
-
Peter Chen authored
We have already renamed the file name, change doc name at this patch. Cc: devicetree@vger.kernel.org Cc: linux-doc@vger.kernel.org Signed-off-by:
-
Marc Kleine-Budde authored
This patch makes the controller register map ci_regs_nolpm and ci_regs_lpm as "const". Further, as all offset fit into a single byte, the type is changed from uintptr_t to u8. Signed-off-by:
-
Marc Kleine-Budde authored
Without this patch a seperate chunk of memory is allocated for the regmap array. As the regmap is always used it makes no sense to allocate a seperate memory block for it, this patch moves the regmap array directly into the struct hw_bank. Signed-off-by:
-
Rahul Bedarkar authored
Signed-off-by:
Rahul Bedarkar <rahulbedarkar89@gmail.com> Signed-off-by:
-
Rahul Bedarkar authored
Signed-off-by:
-
Rahul Bedarkar authored
Signed-off-by:
-
Rahul Bedarkar authored
Signed-off-by:
-
Rahul Bedarkar authored
Signed-off-by:
-
Rahul Bedarkar authored
Signed-off-by:
-
Rahul Bedarkar authored
Signed-off-by:
-
Rahul Bedarkar authored
Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
-
Rahul Bedarkar authored
Signed-off-by:
-
Greg Kroah-Hartman authored
CONFIG_USB_DEBUG is going away, and all of the other USB drivers no longer rely on "debug" module parameters for debugging lines, so move the pcwd_usb driver to use the dynamic debug infrastructure to be more in line with the rest of the kernel. Signed-off-by:
Guenter Roeck <linux@roeck-us.net>
-
Max Filippov authored
This fixes the following warning: BUG: sleeping function called from invalid context at mm/slub.c:940 in_atomic(): 1, irqs_disabled(): 1, pid: 17, name: khubd CPU: 0 PID: 17 Comm: khubd Not tainted 3.12.0-00004-g938dd60-dirty #1 __might_sleep+0xbe/0xc0 kmem_cache_alloc_trace+0x36/0x170 c67x00_urb_enqueue+0x5c/0x254 usb_hcd_submit_urb+0x66e/0x724 usb_submit_urb+0x2ac/0x308 usb_start_wait_urb+0x2c/0xb8 usb_control_msg+0x8c/0xa8 hub_port_init+0x191/0x718 hub_thread+0x804/0xe14 kthread+0x72/0x78 ret_from_kernel_thread+0x8/0xc Signed-off-by:
Max Filippov <jcmvbkbc@gmail.com> Acked-by:
Peter Korsgaard <peter@korsgaard.com> Signed-off-by:
-
Max Filippov authored
According to CY7C67300 specification HPI read and write cycle duration Tcyc must be at least 6T long, where T is 1/48MHz, which is 125ns. Without this delay fast host processor cannot write to chip registers. Add proper ndelay to hpi_{read,write}_reg. Signed-off-by:
-
- 07 Jan, 2014 2 commits
-
-
Alan Stern authored
There is a race in the hub driver between hub_disconnect() and recursively_mark_NOTATTACHED(). This race can be triggered if the driver is unbound from a device at the same time as the bus's root hub is removed. When the race occurs, it can cause an oops: BUG: unable to handle kernel NULL pointer dereference at 0000015c IP: [<c16d5fb0>] recursively_mark_NOTATTACHED+0x20/0x60 Call Trace: [<c16d5fc4>] recursively_mark_NOTATTACHED+0x34/0x60 [<c16d5fc4>] recursively_mark_NOTATTACHED+0x34/0x60 [<c16d5fc4>] recursively_mark_NOTATTACHED+0x34/0x60 [<c16d5fc4>] recursively_mark_NOTATTACHED+0x34/0x60 [<c16d6082>] usb_set_device_state+0x92/0x120 [<c16d862b>] usb_disconnect+0x2b/0x1a0 [<c16dd4c0>] usb_remove_hcd+0xb0/0x160 [<c19ca846>] ? _raw_spin_unlock_irqrestore+0x26/0x50 [<c1704efc>] ehci_mid_remove+0x1c/0x30 [<c1704f26>] ehci_mid_stop_host+0x16/0x30 [<c16f7698>] penwell_otg_work+0xd28/0x3520 [<c19c945b>] ? __schedule+0x39b/0x7f0 [<c19cdb9d>] ? sub_preempt_count+0x3d/0x50 [<c125e97d>] process_one_work+0x11d/0x3d0 [<c19c7f4d>] ? mutex_unlock+0xd/0x10 [<c125e0e5>] ? manage_workers.isra.24+0x1b5/0x270 [<c125f009>] worker_thread+0xf9/0x320 [<c19ca846>] ? _raw_spin_unlock_irqrestore+0x26/0x50 [<c125ef10>] ? rescuer_thread+0x2b0/0x2b0 [<c1264ac4>] kthread+0x94/0xa0 [<c19d0f77>] ret_from_kernel_thread+0x1b/0x28 [<c1264a30>] ? kthread_create_on_node+0xc0/0xc0 One problem is that recursively_mark_NOTATTACHED() uses the intfdata value and hub->hdev->maxchild while hub_disconnect() is clearing them. Another problem is that it uses hub->ports[i] while the port device is being released. To fix this race, we need to hold the device_state_lock while hub_disconnect() changes the values. (Note that usb_disconnect() and hub_port_connect_change() already acquire this lock at similar critical times during a USB device's life cycle.) We also need to remove the port devices after maxchild has been set to 0, instead of before. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Reported-by:
"Du, Changbin" <changbinx.du@intel.com> Tested-by:
-
Arnd Bergmann authored
After commit 99f14bd4 "Merge 3.13-rc5 into usb-next" (in linux-next as of today), I'm getting this error building any at91 kernel: drivers/usb/host/ohci-at91.c: In function 'usb_hcd_at91_probe': drivers/usb/host/ohci-at91.c:190:4: error: label 'err' used but not defined goto err; ^ drivers/usb/host/ohci-at91.c: At top level: drivers/usb/host/ohci-at91.c:206:2: warning: data definition has no type or storage class [enabled by default] at91_stop_hc(pdev); ^ ... The problem is obviously a mismerge between two unrelated changes that resulted in missing opening braces. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
Boris BREZILLON <b.brezillon@overkiz.com> Signed-off-by:
-
- 03 Jan, 2014 20 commits
-
-
Johan Hovold authored
Switch to the generic TIOCMIWAIT implementation. Signed-off-by:
-
Johan Hovold authored
Only wake up MSR wait queue on actual modem-status changes. Signed-off-by:
-
Johan Hovold authored
Clean up interrupt completion handler somewhat. Signed-off-by:
-
Johan Hovold authored
Switch to the generic TIOCMIWAIT implementation which does not suffer from the races involved when using the deprecated sleep_on functions. Acked-by:
-
Johan Hovold authored
Only wake up MSR wait queue on actual modem-status changes. Signed-off-by:
-
Johan Hovold authored
Make sure the TIOCMIWAIT mask is always honoured. The CH341 interrupt status has a multiple-status changed flag which indicates that multiple status changes has occurred since last interrupt event. Unfortunately, if the final status is the same, there appears to be no way to determine which signal(s) has changed (an even number of times). This means that the multiple-status flag should not be used in TIOCMIWAIT as it leads to the signal mask argument being ignored (e.g. TIOCMIWAIT could return if DSR changes twice, even though the user only cares about carrier changes). Signed-off-by:
-
Johan Hovold authored
Clean up line-status handling. Signed-off-by:
-
Johan Hovold authored
Refactor line-status handling. Signed-off-by:
-
Johan Hovold authored
Switch to the generic TIOCMIWAIT implementation which does not suffer from the races involved when using the deprecated sleep_on functions. Acked-by:
-
Johan Hovold authored
Only wake up MSR wait queue on actual modem-status changes. Signed-off-by:
-
Johan Hovold authored
Clean up protocol definitions. Signed-off-by:
-
Johan Hovold authored
Fix ring-indicator (RI) status-bit definition, which was defined as CTS, effectively preventing RI-changes from being detected while reporting false RI status. This bug predates git. Cc: stable@vger.kernel.org Signed-off-by:
-
Johan Hovold authored
Switch to the generic TIOCMIWAIT implementation which does not suffer from the races involved when using the deprecated sleep_on functions. Acked-by:
-
Johan Hovold authored
Only wake up MSR wait queue on actual modem-status changes. Signed-off-by:
-
Johan Hovold authored
Clean up line-status handling somewhat. Get tty-reference only when actually needed. Signed-off-by:
-
Johan Hovold authored
Declare constant device-type data as const. Signed-off-by:
-
Mikhail Zolotaryov authored
The USB storage operation of Nokia Asha 502 Dual SIM smartphone running Asha Platform 1.1.1 is unreliable in respect of data consistency (i.e. transfered files are corrupted). A similar issue is described here: http://discussions.nokia.com/t5/Asha-and-other-Nokia-Series-30/Nokia-301-USB-transfers-and-corrupted-files/td-p/1974170 The workaround is (MAX_SECTORS_64): rmmod usb_storage && modprobe usb_storage quirks=0421:06aa:m The patch adds the tested device to the unusual list permanently. Signed-off-by:
Mikhail Zolotaryov <lebon@lebon.org.ua> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Rahul Bedarkar authored
Add support for iBall 3.5G connect usb modem. $lsusb Bus 002 Device 006: ID 1c9e:9605 OMEGA TECHNOLOGY $usb-devices T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 6 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1c9e ProdID=9605 Rev=00.00 S: Manufacturer=USB Modem S: Product=USB Modem S: SerialNumber=1234567890ABCDEF C: #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 4 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage Signed-off-by:
Bjørn Mork <bjorn@mork.no> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Rahul Bedarkar authored
Signed-off-by:
-
Rahul Bedarkar authored
Signed-off-by:
-
