- 14 Apr, 2023 40 commits
-
-
Yevgeny Kliteynik authored
If there is support for pattern/args, use the new accelerated modify header action for modify header and decap L3 actions. Otherwise fall back to the old modify-header implementation. Signed-off-by:
Yevgeny Kliteynik <kliteyn@nvidia.com> Reviewed-by:
Alex Vesker <valex@nvidia.com> Signed-off-by:
Saeed Mahameed <saeedm@nvidia.com>
-
Yevgeny Kliteynik authored
While building the actions, add the pointer of the arguments for accelerated modify list action into the action's attributes. This will be used later on while building the specific STE for this action. Signed-off-by:
-
Yevgeny Kliteynik authored
Added new mechanism for handling arguments for modify-header action. The new action "accelerated modify-header" asks for the arguments from separated area from the pattern, this area accessed via general objects. Handling of these object is done via the pool-manager struct. When the new header patterns are supported, while loading the domain, a few pools for argument creations will be created. The requests for allocating/deallocating arg objects are done via the pool manager API. Signed-off-by:
Muhammad Sammar <muhammads@nvidia.com> Signed-off-by:
-
Yevgeny Kliteynik authored
When allocating a QP we allocate an RQ and an SQ, the RQ is stored first in memory and followed by the SQ. This allocation is not physically continiuos - it may span across different physical pages. SW Steering code always writes in pairs: 1BB write + 1BB read, or 2 continuous BBs of GTA WQE. This lead to an issue where RQ allocation was 4x16 which is equal to 1 WQE BB, causing 1 BB offset in the page and splitting the GTA WQE between different physical pages. The solution was to create the RQ with a even number of BBs and to have the RQ aligned to a page. Signed-off-by:
-
Yevgeny Kliteynik authored
Instead of using the write buffer for reading we will use a dedicated buffer only for reading ICM memory. Due to the new support for args, we can have a case with pending_wc being odd number, and with reading into the same write buffer, it is possible to overwrite next write on the same slot. For example: pending_wc is 17 so the buffer for write is: | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | and we have requests as follows: r wr wr wr wr wr wr wr wr Now, the first read will be written into the last write because we use the same buffer for read and write, before it was written to the HW and we will have a wrong data in the ICM area. Signed-off-by:
Erez Shitrit <erezsh@nvidia.com> Signed-off-by:
-
Yevgeny Kliteynik authored
The accelerated modify header arguments are written in the HW area with special WQE and specific data format. New function was added to support writing of new argument type. Note that GTA WQE is larger than READ and WRITE, so the queue management logic was updated to support this. Signed-off-by:
-
Yevgeny Kliteynik authored
Add functions for creation/destruction of the new type of general object. Signed-off-by:
-
Yevgeny Kliteynik authored
Signed-off-by:
-
Yevgeny Kliteynik authored
This way we are able to allocate chunk for modify_headers from 2 types: STEv0 that is allocated from the action area, and STEv1 that is allocating the chunks from the special area for patterns. Signed-off-by:
-
Yevgeny Kliteynik authored
Starting with ConnectX-6 Dx, we use new design of modify_header FW object. The current modify_header object allows for having only limited number of FW objects, so the new design of pattern and argument allows pattern reuse, saving memory, and having a large number of modify_header objects. Signed-off-by:
-
Yevgeny Kliteynik authored
Move ACTION_CACHE_LINE_SIZE macro to header to be used by the pattern functions as well. Signed-off-by:
-
David S. Miller authored
Kevin Brodsky says: ==================== net: Finish up ->msg_control{,_user} split Commit 1f466e1f ("net: cleanly handle kernel vs user buffers for ->msg_control") introduced the msg_control_user and msg_control_is_user fields in struct msghdr, to ensure that user pointers are represented as such. It also took care of converting most users of struct msghdr::msg_control where user pointers are involved. It did however miss a number of cases, and some code using msg_control inappropriately has also appeared in the meantime. This series is attempting to complete the split, by eliminating the remaining cases where msg_control is used when in fact a user pointer is stored in the union (patch 1). It also addresses a couple of issues with msg_control_is_user: one where it is not updated as it should (patch 2), and one where it is not initialised (patch 3). v1..v2: * Split out the msg_control_is_user fixes into separate patches. ==================== Signed-off-by:David S. Miller <davem@davemloft.net>
-
Kevin Brodsky authored
do_ipv6_setsockopt() makes use of struct msghdr::msg_control in the IPV6_2292PKTOPTIONS case. Make sure to initialise msg_control_is_user accordingly. Cc: Christoph Hellwig <hch@lst.de> Cc: Eric Dumazet <edumazet@google.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Kevin Brodsky <kevin.brodsky@arm.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Kevin Brodsky authored
cmsghdr_from_user_compat_to_kern() is an unusual case w.r.t. how the kmsg->msg_control* fields are used. The input struct msghdr holds a pointer to a user buffer, i.e. ksmg->msg_control_user is active. However, upon success, a kernel pointer is stored in kmsg->msg_control. kmsg->msg_control_is_user should therefore be updated accordingly. Cc: Christoph Hellwig <hch@lst.de> Cc: Eric Dumazet <edumazet@google.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Signed-off-by:
-
Kevin Brodsky authored
Since commit 1f466e1f ("net: cleanly handle kernel vs user buffers for ->msg_control"), pointers to user buffers should be stored in struct msghdr::msg_control_user, instead of the msg_control field. Most users of msg_control have already been converted (where user buffers are involved), but not all of them. This patch attempts to address the remaining cases. An exception is made for null checks, as it should be safe to use msg_control unconditionally for that purpose. Cc: Christoph Hellwig <hch@lst.de> Cc: Eric Dumazet <edumazet@google.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Signed-off-by:
-
Arseniy Krasnov authored
This replaces 'skb_queue_tail()' with 'virtio_vsock_skb_queue_tail()'. The first one uses 'spin_lock_irqsave()', second uses 'spin_lock_bh()'. There is no need to disable interrupts in the loopback transport as there is no access to the queue with skbs from interrupt context. Both virtio and vhost transports work in the same way. Signed-off-by:
Arseniy Krasnov <AVKrasnov@sberdevices.ru> Reviewed-by:
Stefano Garzarella <sgarzare@redhat.com> Signed-off-by:
-
David S. Miller authored
Haiyang Zhang says: ==================== net: mana: Add support for jumbo frame The set adds support for jumbo frame, with some optimization for the RX path. ==================== Signed-off-by: -
Haiyang Zhang authored
During probe, get the hardware-allowed max MTU by querying the device configuration. Users can select MTU up to the device limit. When XDP is in use, limit MTU settings so the buffer size is within one page. And, when MTU is set to a too large value, XDP is not allowed to run. Also, to prevent changing MTU fails, and leaves the NIC in a bad state, pre-allocate all buffers before starting the change. So in low memory condition, it will return error, without affecting the NIC. Signed-off-by:
Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by:
Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by:
-
Haiyang Zhang authored
Update RX data path to allocate and use RX queue DMA buffers with proper size based on potentially various MTU sizes. Signed-off-by:
-
Haiyang Zhang authored
Move out common buffer allocation code from mana_process_rx_cqe() and mana_alloc_rx_wqe() to helper functions. Refactor related variables so they can be changed in one place, and buffer sizes are in sync. Signed-off-by:
-
Haiyang Zhang authored
Use napi_build_skb() instead of build_skb() to take advantage of the NAPI percpu caches to obtain skbuff_head. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxJakub Kicinski authored
Saeed Mahameed says: ==================== mlx5-updates-2023-04-11 1) Vlad adds the support for linux bridge multicast offload support Patches #1 through #9 Synopsis Vlad Says: ============== Implement support of bridge multicast offload in mlx5. Handle port object attribute SWITCHDEV_ATTR_ID_BRIDGE_MC_DISABLED notification to toggle multicast offload and bridge snooping support on bridge. Handle port object SWITCHDEV_OBJ_ID_PORT_MDB notification to attach a bridge port to MDB. Steering architecture Existing offload infrastructure relies on two levels of flow tables - bridge ingress and egress. For multicast offload the architecture is extended with additional layer of per-port multicast replication tables. Such tables filter loopback traffic (so packets are not replicated to their source port) and pop VLAN headers for "untagged" VLANs. The tables are referenced by the MDB rules in egress table. MDB egress rule can point to multiple per-port multicast tables, which causes matching multicast traffic to be replicated to all of them, and, consecutively, to several bridge ports: +--------+--+ +---------------------------------------> Port 1 | | | +-^------+--+ | | | | +-----------------------------------------+ | +---------------------------+ | | EGRESS table | | +--> PORT 1 multicast table | | +----------------------------------+ +-----------------------------------------+ | | +---------------------------+ | | INGRESS table | | | | | | | | +----------------------------------+ | dst_mac=P1,vlan=X -> pop vlan, goto P1 +--+ | | FG0: | | | | | dst_mac=P1,vlan=Y -> pop vlan, goto P1 | | | src_port=dst_port -> drop | | | src_mac=M1,vlan=X -> goto egress +---> dst_mac=P2,vlan=X -> pop vlan, goto P2 +--+ | | FG1: | | | ... | | dst_mac=P2,vlan=Y -> goto P2 | | | | VLAN X -> pop, goto port | | | | | dst_mac=MDB1,vlan=Y -> goto mcast P1,P2 +-----+ | ... | | +----------------------------------+ | | | | | VLAN Y -> pop, goto port +-------+ +-----------------------------------------+ | | | FG3: | | | | matchall -> goto port | | | | | | | +---------------------------+ | | | | | | +--------+--+ +---------------------------------------> Port 2 | | | +-^------+--+ | | | | | +---------------------------+ | +--> PORT 2 multicast table | | +---------------------------+ | | | | | FG0: | | | src_port=dst_port -> drop | | | FG1: | | | VLAN X -> pop, goto port | | | ... | | | | | | FG3: | | | matchall -> goto port +-------+ | | +---------------------------+ Patches overview: - Patch 1 adds hardware definition bits for capabilities required to replicate multicast packets to multiple per-port tables. These bits are used by following patches to only attempt multicast offload if firmware and hardware provide necessary support. - Pathces 2-4 patches are preparations and refactoring. - Patch 5 implements necessary infrastructure to toggle multicast offload via SWITCHDEV_ATTR_ID_BRIDGE_MC_DISABLED port object attribute notification. This also enabled IGMP and MLD snooping. - Patch 6 implements per-port multicast replication tables. It only supports filtering of loopback packets. - Patch 7 extends per-port multicast tables with VLAN pop support for 'untagged' VLANs. - Patch 8 handles SWITCHDEV_OBJ_ID_PORT_MDB port object notifications. It creates MDB replication rules in egress table that can replicate packets to multiple per-port multicast tables. - Patch 9 adds tracepoints for MDB events. ============== 2) Parav Create a new allocation profile for SFs, to save on memory 3) Yevgeny provides some initial patches for upcoming software steering support new pattern/arguments type of modify_header actions. Starting with ConnectX-6 DX, we use a new design of modify_header FW object. The current modify_header object allows for having only limited number of these FW objects, which means that we are limited in the number of offloaded flows that require modify_header action. As a preparation Yevgeny provides the following 4 patches: - Patch 1: Add required mlx5_ifc HW bits - Patch 2, 3: Add new WQE type and opcode that is required for pattern/arg support and adds appropriate support in dr_send.c - Patch 4: Add ICM pool for modify-header-pattern objects and implement patterns cache, allowing patterns reuse for different flows * tag 'mlx5-updates-2023-04-11' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux: net/mlx5: DR, Add modify-header-pattern ICM pool net/mlx5: DR, Prepare sending new WQE type net/mlx5: Add new WQE for updating flow table net/mlx5: Add mlx5_ifc bits for modify header argument net/mlx5: DR, Set counter ID on the last STE for STEv1 TX net/mlx5: Create a new profile for SFs net/mlx5: Bridge, add tracepoints for multicast net/mlx5: Bridge, implement mdb offload net/mlx5: Bridge, support multicast VLAN pop net/mlx5: Bridge, add per-port multicast replication tables net/mlx5: Bridge, snoop igmp/mld packets net/mlx5: Bridge, extract code to lookup parent bridge of port net/mlx5: Bridge, move additional data structures to priv header net/mlx5: Bridge, increase bridge tables sizes net/mlx5: Add mlx5_ifc definitions for bridge multicast support ==================== Link: https://lore.kernel.org/r/20230412040752.14220-1-saeed@kernel.orgSigned-off-by:Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
Vladimir Oltean says: ==================== Add kernel tc-mqprio and tc-taprio support for preemptible traffic classes The last RFC in August 2022 contained a proposal for the UAPI of both TSN standards which together form Frame Preemption (802.1Q and 802.3): https://lore.kernel.org/netdev/20220816222920.1952936-1-vladimir.oltean@nxp.com/ It wasn't clear at the time whether the 802.1Q portion of Frame Preemption should be exposed via the tc qdisc (mqprio, taprio) or via some other layer (perhaps also ethtool like the 802.3 portion, or dcbnl), even though the options were discussed extensively, with pros and cons: https://lore.kernel.org/netdev/20220816222920.1952936-3-vladimir.oltean@nxp.com/ So the 802.3 portion got submitted separately and finally was accepted: https://lore.kernel.org/netdev/20230119122705.73054-1-vladimir.oltean@nxp.com/ leaving the only remaining question: how do we expose the 802.1Q bits? This series proposes that we use the Qdisc layer, through separate (albeit very similar) UAPI in mqprio and taprio, and that both these Qdiscs pass the information down to the offloading device driver through the common mqprio offload structure (which taprio also passes). An implementation is provided for the NXP LS1028A on-board Ethernet endpoint (enetc). Previous versions also contained support for its embedded switch (felix), but this needs more work and will be submitted separately. v4: https://lore.kernel.org/netdev/20230403103440.2895683-1-vladimir.oltean@nxp.com/ v2: https://lore.kernel.org/netdev/20230219135309.594188-1-vladimir.oltean@nxp.com/ v1: https://lore.kernel.org/netdev/20230216232126.3402975-1-vladimir.oltean@nxp.com/ ==================== Link: https://lore.kernel.org/r/20230411180157.1850527-1-vladimir.oltean@nxp.comSigned-off-by:
-
Vladimir Oltean authored
PFs which support the MAC Merge layer also have a set of 8 registers called "Port traffic class N frame preemption register (PTC0FPR - PTC7FPR)". Through these, a traffic class (group of TX rings of same dequeue priority) can be mapped to the eMAC or to the pMAC. There's nothing particularly spectacular here. We should probably only commit the preemptible TCs to hardware once the MAC Merge layer became active, but unlike Felix, we don't have an IRQ that notifies us of that. We'd have to sleep for up to verifyTime (127 ms) to wait for a resolution coming from the verification state machine; not only from the ndo_setup_tc() code path, but also from enetc_mm_link_state_update(). Since it's relatively complicated and has a relatively small benefit, I'm not doing it. Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by:
Ferenc Fejes <fejes@inf.elte.hu> Reviewed-by:
Simon Horman <simon.horman@corigine.com> Signed-off-by:
-
Vladimir Oltean authored
To gain access to the larger encapsulating structure which has the type tc_mqprio_qopt_offload, rename just the "qopt" field as "qopt". Signed-off-by:
-
Vladimir Oltean authored
This is a duplication of the FP adminStatus logic introduced for tc-mqprio. Offloading is done through the tc_mqprio_qopt_offload structure embedded within tc_taprio_qopt_offload. So practically, if a device driver is written to treat the mqprio portion of taprio just like standalone mqprio, it gets unified handling of frame preemption. I would have reused more code with taprio, but this is mostly netlink attribute parsing, which is hard to transform into generic code without having something that stinks as a result. We have the same variables with the same semantics, just different nlattr type values (TCA_MQPRIO_TC_ENTRY=5 vs TCA_TAPRIO_ATTR_TC_ENTRY=12; TCA_MQPRIO_TC_ENTRY_FP=2 vs TCA_TAPRIO_TC_ENTRY_FP=3, etc) and consequently, different policies for the nest. Every time nla_parse_nested() is called, an on-stack table "tb" of nlattr pointers is allocated statically, up to the maximum understood nlattr type. That array size is hardcoded as a constant, but when transforming this into a common parsing function, it would become either a VLA (which the Linux kernel rightfully doesn't like) or a call to the allocator. Having FP adminStatus in tc-taprio can be seen as addressing the 802.1Q Annex S.3 "Scheduling and preemption used in combination, no HOLD/RELEASE" and S.4 "Scheduling and preemption used in combination with HOLD/RELEASE" use cases. HOLD and RELEASE events are emitted towards the underlying MAC Merge layer when the schedule hits a Set-And-Hold-MAC or a Set-And-Release-MAC gate operation. So within the tc-taprio UAPI space, one can distinguish between the 2 use cases by choosing whether to use the TC_TAPRIO_CMD_SET_AND_HOLD and TC_TAPRIO_CMD_SET_AND_RELEASE gate operations within the schedule, or just TC_TAPRIO_CMD_SET_GATES. A small part of the change is dedicated to refactoring the max_sdu nlattr parsing to put all logic under the "if" that tests for presence of that nlattr. Signed-off-by:
-
Vladimir Oltean authored
IEEE 802.1Q-2018 clause 6.7.2 Frame preemption specifies that each packet priority can be assigned to a "frame preemption status" value of either "express" or "preemptible". Express priorities are transmitted by the local device through the eMAC, and preemptible priorities through the pMAC (the concepts of eMAC and pMAC come from the 802.3 MAC Merge layer). The FP adminStatus is defined per packet priority, but 802.1Q clause 12.30.1.1.1 framePreemptionAdminStatus also says that: | Priorities that all map to the same traffic class should be | constrained to use the same value of preemption status. It is impossible to ignore the cognitive dissonance in the standard here, because it practically means that the FP adminStatus only takes distinct values per traffic class, even though it is defined per priority. I can see no valid use case which is prevented by having the kernel take the FP adminStatus as input per traffic class (what we do here). In addition, this also enforces the above constraint by construction. User space network managers which wish to expose FP adminStatus per priority are free to do so; they must only observe the prio_tc_map of the netdev (which presumably is also under their control, when constructing the mqprio netlink attributes). The reason for configuring frame preemption as a property of the Qdisc layer is that the information about "preemptible TCs" is closest to the place which handles the num_tc and prio_tc_map of the netdev. If the UAPI would have been any other layer, it would be unclear what to do with the FP information when num_tc collapses to 0. A key assumption is that only mqprio/taprio change the num_tc and prio_tc_map of the netdev. Not sure if that's a great assumption to make. Having FP in tc-mqprio can be seen as an implementation of the use case defined in 802.1Q Annex S.2 "Preemption used in isolation". There will be a separate implementation of FP in tc-taprio, for the other use cases. Signed-off-by:
-
Vladimir Oltean authored
With the multiplexed ndo_setup_tc() model which lacks a first-class struct netlink_ext_ack * argument, the only way to pass the netlink extended ACK message down to the device driver is to embed it within the offload structure. Do this for struct tc_mqprio_qopt_offload and struct tc_taprio_qopt_offload. Since struct tc_taprio_qopt_offload also contains a tc_mqprio_qopt_offload structure, and since device drivers might effectively reuse their mqprio implementation for the mqprio portion of taprio, we make taprio set the extack in both offload structures to point at the same netlink extack message. In fact, the taprio handling is a bit more tricky, for 2 reasons. First is because the offload structure has a longer lifetime than the extack structure. The driver is supposed to populate the extack synchronously from ndo_setup_tc() and leave it alone afterwards. To not have any use-after-free surprises, we zero out the extack pointer when we leave taprio_enable_offload(). The second reason is because taprio does overwrite the extack message on ndo_setup_tc() error. We need to switch to the weak form of setting an extack message, which preserves a potential message set by the driver. Signed-off-by:
Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by:
-
Vladimir Oltean authored
Ferenc reports that a combination of poor iproute2 defaults and obscure cases where the kernel returns -EINVAL make it difficult to understand what is wrong with this command: $ ip link add veth0 numtxqueues 8 numrxqueues 8 type veth peer name veth1 $ tc qdisc add dev veth0 root mqprio num_tc 8 map 0 1 2 3 4 5 6 7 \ queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 RTNETLINK answers: Invalid argument Hopefully with this patch, the cause is clearer: Error: Device does not support hardware offload. The kernel was (and still is) rejecting this because iproute2 defaults to "hw 1" if this command line option is not specified. Link: https://lore.kernel.org/netdev/ede5e9a2f27bf83bfb86d3e8c4ca7b34093b99e2.camel@inf.elte.hu/Signed-off-by: -
Vladimir Oltean authored
Netlink attribute parsing in mqprio is a minesweeper game, with many options having the possibility of being passed incorrectly and the user being none the wiser. Try to make errors less sour by giving user space some information regarding what went wrong. Signed-off-by:
-
Vladimir Oltean authored
In commit 4e8b86c0 ("mqprio: Introduce new hardware offload mode and shaper in mqprio"), the TCA_OPTIONS format of mqprio was extended to contain a fixed portion (of size NLA_ALIGN(sizeof struct tc_mqprio_qopt)) and a variable portion of other nlattrs (in the TCA_MQPRIO_* type space) following immediately afterwards. In commit feb2cf3d ("net/sched: mqprio: refactor nlattr parsing to a separate function"), we've moved the nlattr handling to a smaller function, but yet, a small parse_attr() still remains, and the larger mqprio_parse_nlattr() still does not have access to the beginning, and the length, of the TCA_OPTIONS region containing these other nlattrs. In a future change, the mqprio qdisc will need to iterate through this nlattr region to discover other attributes, so eliminate parse_attr() and add 2 variables in mqprio_parse_nlattr() which hold the beginning and the length of the nlattr range. We avoid the need to memset when nlattr_opt_len has insufficient length by pre-initializing the table "tb". Signed-off-by:
-
Vladimir Oltean authored
Create a wrapper over __ethtool_dev_mm_supported() which also calls ethnl_ops_begin() and ethnl_ops_complete(). It can be used by other code layers, such as tc, to make sure that preemptible TCs are supported (this is true if an underlying MAC Merge layer exists). Signed-off-by:
-
Rahul Rameshbabu authored
Make it explicit that this tool is not a drop-in replacement for ethtool. This tool is intended for testing ethtool functionality implemented in the kernel and should use a name that differentiates it from the ethtool utility. Signed-off-by:
Rahul Rameshbabu <rrameshbabu@nvidia.com> Link: https://lore.kernel.org/r/20230413012252.184434-2-rrameshbabu@nvidia.comSigned-off-by:
-
Rahul Rameshbabu authored
Absolute paths for the spec and schema files make the ethtool testing tool unusable with freshly checked-out source trees. Replace absolute paths with relative paths for both files in the Documentation/ directory. Issue seen before the change Traceback (most recent call last): File "/home/binary-eater/Documents/mlx/linux/tools/net/ynl/./ethtool", line 424, in <module> main() File "/home/binary-eater/Documents/mlx/linux/tools/net/ynl/./ethtool", line 158, in main ynl = YnlFamily(spec, schema) File "/home/binary-eater/Documents/mlx/linux/tools/net/ynl/lib/ynl.py", line 342, in __init__ super().__init__(def_path, schema) File "/home/binary-eater/Documents/mlx/linux/tools/net/ynl/lib/nlspec.py", line 333, in __init__ with open(spec_path, "r") as stream: FileNotFoundError: [Errno 2] No such file or directory: '/usr/local/google/home/sdf/src/linux/Documentation/netlink/specs/ethtool.yaml' Fixes: f3d07b02 ("tools: ynl: ethtool testing tool") Signed-off-by: -
Jakub Kicinski authored
Harini Katakam says: ==================== Macb PTP minor updates - Enable PTP unicast - Optimize HW timestamp reading ==================== Link: https://lore.kernel.org/r/20230411123712.11459-1-harini.katakam@amd.comSigned-off-by:
-
Harini Katakam authored
The seconds input from BD (6 bits) just needs to be ORed with the upper bits from timer in this function. Avoid addition operation every single time. Seconds rollover handling is left untouched. Signed-off-by:
Harini Katakam <harini.katakam@xilinx.com> Signed-off-by:
Michal Simek <michal.simek@xilinx.com> Signed-off-by:
Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com> Signed-off-by:
-
Harini Katakam authored
Enable transmission and reception of PTP unicast packets by updating PTP unicast config bit and setting current HW mac address as allowed address in PTP unicast filter registers. Signed-off-by:
-
Harini Katakam authored
There are currently two checks for PTP functionality - one on GEM capability and another on the kernel config option. Combine them into a single function as there's no use case where gem_has_ptp is TRUE and MACB_USE_HWSTAMP is false. Signed-off-by:
Harini Katakam <harini.katakam@amd.com> Signed-off-by:
-
Jakub Kicinski authored
Vladimir Oltean says: ==================== Ocelot/Felix driver cleanup The cleanup mostly handles the statistics code path - some issues regarding understandability became apparent after the series "Fix trainwreck with Ocelot switch statistics counters": https://lore.kernel.org/netdev/20230321010325.897817-1-vladimir.oltean@nxp.com/ There is also one patch which cleans up a misleading comment in the DSA felix_setup(). ==================== Link: https://lore.kernel.org/r/20230412124737.2243527-1-vladimir.oltean@nxp.comSigned-off-by:
-
Vladimir Oltean authored
Since it is hopefully now clear that, since "last" and "layout[i].reg" are enum types and not addresses, the existing WARN_ON() is ineffective in checking that the _addresses_ are sorted in the proper order. Signed-off-by:
Jacob Keller <jacob.e.keller@intel.com> Signed-off-by:
-
