Merge remote-tracking branches 'asoc/topic/atmel', 'asoc/topic/cirrus' and 'asoc/topic/cleanup' into asoc-next

Merge remote-tracking branches 'asoc/topic/adau1977', 'asoc/topic/ak4642', 'asoc/topic/ak5386' and 'asoc/topic/arizona' into asoc-next

ASoC: Fixes for v3.16

A bigger batch of changes than I would like as I didn't send any for a
few weeks without noticing how many had built up.  They are almost all
driver specific though, larger changes are:

 - Fixes to the newly added Baytrail/MAX98090 which look like some QA
   was missed on the microphone detection.
 - Deletion of some erroniously listed audio formats for Haswell.
 - Fix debugfs creation in the core so that we don't try to generate
   multiple directories with the same name, relatively large textually
   but simple to inspect by eye and test.
 - A couple of bugfixes for the rcar driver one of which which involves
   a bit of code motion to move initailisation of some hardware out of
   common paths into device specific ones.
 - Ensure both channels are powered up for mono outputs on Arizona
   devices, involving some simple data tables listing the outputs and a
   loop over them.
 - A couple of fixes to save and restore information on suspended and
   idle Samsung I2S controllers.

# gpg: Signature made Tue 22 Jul 2014 00:52:53 BST using RSA key ID 7EA229BD
# gpg: Good signature from "Mark Brown <broonie@sirena.org.uk>"
# gpg:                 aka "Mark Brown <broonie@debian.org>"
# gpg:                 aka "Mark Brown <broonie@kernel.org>"
# gpg:                 aka "Mark Brown <broonie@tardis.ed.ac.uk>"
# gpg:                 aka "Mark Brown <broonie@linaro.org>"
# gpg:                 aka "Mark Brown <Mark.Brown@linaro.org>"

ASoC: Fixes for v3.16

Quite a few build coverage fixes in here among the usual small driver
fixes includling the sigmadsp change from Lars - moving the driver to
separate modules per bus (which is basically just code motion) avoids
issues with some combinations of buses being enabled.

# gpg: Signature made Thu 19 Jun 2014 11:57:31 BST using RSA key ID 7EA229BD
# gpg: Good signature from "Mark Brown <broonie@sirena.org.uk>"
# gpg:                 aka "Mark Brown <broonie@debian.org>"
# gpg:                 aka "Mark Brown <broonie@kernel.org>"
# gpg:                 aka "Mark Brown <broonie@tardis.ed.ac.uk>"
# gpg:                 aka "Mark Brown <broonie@linaro.org>"
# gpg:                 aka "Mark Brown <Mark.Brown@linaro.org>"

Negating ADAU1977_BLOCK_POWER_SAI_LDO_EN creates an unsigned long constant
with all bits set which on 64 bit architectures needs to be truncated to
an unsigned int, generating a warning. Add an explicit cast since we know
this is OK.
Signed-off-by: Mark Brown <broonie@linaro.org>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>

Pull timer fixes from Thomas Gleixner:
 "Two fixes in the timer area:
   - a long-standing lock inversion due to a printk
   - suspend-related hrtimer corruption in sched_clock"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  timer: Fix lock inversion between hrtimer_bases.lock and scheduler locks
  sched_clock: Avoid corrupting hrtimer tree during suspend

Pull ARM fixes from Russell King:
 "A few fixes for ARM.  Some of these are correctness issues:
   - TLBs must be flushed after the old mappings are removed by the DMA
     mapping code, but before the new mappings are established.
   - An off-by-one entry error in the Keystone LPAE setup code.

  Fixes include:
   - ensuring that the identity mapping for LPAE does not remove the
     kernel image from the identity map.
   - preventing userspace from trapping into kgdb.
   - fixing a preemption issue in the Intel iwmmxt code.
   - fixing a build error with nommu.

  Other changes include:
   - Adding a note about which areas of memory are expected to be
     accessible while the identity mapping tables are in place"

* 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
  ARM: 8124/1: don't enter kgdb when userspace executes a kgdb break instruction
  ARM: idmap: add identity mapping usage note
  ARM: 8115/1: LPAE: reduce damage caused by idmap to virtual memory layout
  ARM: fix alignment of keystone page table fixup
  ARM: 8112/1: only select ARM_PATCH_PHYS_VIRT if MMU is enabled
  ARM: 8100/1: Fix preemption disable in iwmmxt_task_enable()
  ARM: DMA: ensure that old section mappings are flushed from the TLB

The kgdb breakpoint hooks (kgdb_brk_fn and kgdb_compiled_brk_fn)
should only be entered when a kgdb break instruction is executed
from the kernel. Otherwise, if kgdb is enabled, a userspace program
can cause the kernel to drop into the debugger by executing either
KGDB_BREAKINST or KGDB_COMPILED_BREAK.
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Omar Sandoval <osandov@osandov.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Add a note about the usage of the identity mapping; we do not support
accesses outside of the identity map region and kernel image while a
CPU is using the identity map.  This is because the identity mapping
may overwrite vmalloc space, IO mappings, the vectors pages, etc.
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Pull vfs fixes from Al Viro:
 "This contains a couple of fixes - one is the aio fix from Christoph,
  the other a fallocate() one from Eric"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  vfs: fix check for fallocate on active swapfile
  direct-io: fix AIO regression

Pull x86 fix from Peter Anvin:
 "A single fix to not invoke the espfix code on Xen PV, as it turns out
  to oops the guest when invoked after all.  This patch leaves some
  amount of dead code, in particular unnecessary initialization of the
  espfix stacks when they won't be used, but in the interest of keeping
  the patch minimal that cleanup can wait for the next cycle"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86_64/entry/xen: Do not invoke espfix64 on Xen

Pull staging driver bugfixes from Greg KH:
 "Here are some tiny staging driver bugfixes that I've had in my tree
  for the past week that resolve some reported issues.  Nothing major at
  all, but it would be good to get them merged for 3.16-rc8 or -final"

* tag 'staging-3.16-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: vt6655: Fix disassociated messages every 10 seconds
  staging: vt6655: Fix Warning on boot handle_irq_event_percpu.
  staging: rtl8723au: rtw_resume(): release semaphore before exit on error
  iio:bma180: Missing check for frequency fractional part
  iio:bma180: Fix scale factors to report correct acceleration units
  iio: buffer: Fix demux table creation

Pull device mapper fixes from Mike Snitzer:
 "Fix dm bufio shrinker to properly zero-fill all fields.

  Fix race in dm cache that caused improper reporting of the number of
  dirty blocks in the cache"

* tag 'dm-3.16-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm cache: fix race affecting dirty block count
  dm bufio: fully initialize shrinker

Pull ARM straggler SoC fix from Olof Johansson:
 "A DT bugfix for Nomadik that had an ambigouos double-inversion of a
  gpio line, and one MAINTAINER URL update that might as well go in now.

  We could hold off until the merge window, but then we'll just have to
  mark the DT fix for stable and it just seems like in total causing
  more work"

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  MAINTAINERS: Update Tegra Git URL
  ARM: nomadik: fix up double inversion in DT

DVC can control Mute.
This patch supports it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>

DVC can use Volume and Mute control,
and these control methods doesn't have much difference.
This patch cleanup current method,
and it will be used for Mute control.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>

nr_dirty is updated without locking, causing it to drift so that it is
non-zero (either a small positive integer, or a very large one when an
underflow occurs) even when there are no actual dirty blocks.  This was
due to a race between the workqueue and map function accessing nr_dirty
in parallel without proper protection.

People were seeing under runs due to a race on increment/decrement of
nr_dirty, see: https://lkml.org/lkml/2014/6/3/648

Fix this by using an atomic_t for nr_dirty.

Reported-by: roma1390@gmail.com
Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi>
Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Cc: stable@vger.kernel.org

1d3d4437 ("vmscan: per-node deferred work") added a flags field to
struct shrinker assuming that all shrinkers were zero filled.  The dm
bufio shrinker is not zero filled, which leaves arbitrary kmalloc() data
in flags.  So far the only defined flags bit is SHRINKER_NUMA_AWARE.
But there are proposed patches which add other bits to shrinker.flags
(e.g. memcg awareness).

Rather than simply initializing the shrinker, this patch uses kzalloc()
when allocating the dm_bufio_client to ensure that the embedded shrinker
and any other similar structures are zeroed.

This fixes theoretical over aggressive shrinking of dm bufio objects.
If the uninitialized dm_bufio_client.shrinker.flags contains
SHRINKER_NUMA_AWARE then shrink_slab() would call the dm shrinker for
each numa node rather than just once.  This has been broken since 3.12.
Signed-off-by: Greg Thelen <gthelen@google.com>
Acked-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Cc: stable@vger.kernel.org # v3.12+

clockevents_increase_min_delta() calls printk() from under
hrtimer_bases.lock. That causes lock inversion on scheduler locks because
printk() can call into the scheduler. Lockdep puts it as:

======================================================
[ INFO: possible circular locking dependency detected ]
3.15.0-rc8-06195-g939f04be #2 Not tainted
-------------------------------------------------------
trinity-main/74 is trying to acquire lock:
 (&port_lock_key){-.....}, at: [<811c60be>] serial8250_console_write+0x8c/0x10c

but task is already holding lock:
 (hrtimer_bases.lock){-.-...}, at: [<8103caeb>] hrtimer_try_to_cancel+0x13/0x66

which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:

-> #5 (hrtimer_bases.lock){-.-...}:
       [<8104a942>] lock_acquire+0x92/0x101
       [<8142f11d>] _raw_spin_lock_irqsave+0x2e/0x3e
       [<8103c918>] __hrtimer_start_range_ns+0x1c/0x197
       [<8107ec20>] perf_swevent_start_hrtimer.part.41+0x7a/0x85
       [<81080792>] task_clock_event_start+0x3a/0x3f
       [<810807a4>] task_clock_event_add+0xd/0x14
       [<8108259a>] event_sched_in+0xb6/0x17a
       [<810826a2>] group_sched_in+0x44/0x122
       [<81082885>] ctx_sched_in.isra.67+0x105/0x11f
       [<810828e6>] perf_event_sched_in.isra.70+0x47/0x4b
       [<81082bf6>] __perf_install_in_context+0x8b/0xa3
       [<8107eb8e>] remote_function+0x12/0x2a
       [<8105f5af>] smp_call_function_single+0x2d/0x53
       [<8107e17d>] task_function_call+0x30/0x36
       [<8107fb82>] perf_install_in_context+0x87/0xbb
       [<810852c9>] SYSC_perf_event_open+0x5c6/0x701
       [<810856f9>] SyS_perf_event_open+0x17/0x19
       [<8142f8ee>] syscall_call+0x7/0xb

-> #4 (&ctx->lock){......}:
       [<8104a942>] lock_acquire+0x92/0x101
       [<8142f04c>] _raw_spin_lock+0x21/0x30
       [<81081df3>] __perf_event_task_sched_out+0x1dc/0x34f
       [<8142cacc>] __schedule+0x4c6/0x4cb
       [<8142cae0>] schedule+0xf/0x11
       [<8142f9a6>] work_resched+0x5/0x30

-> #3 (&rq->lock){-.-.-.}:
       [<8104a942>] lock_acquire+0x92/0x101
       [<8142f04c>] _raw_spin_lock+0x21/0x30
       [<81040873>] __task_rq_lock+0x33/0x3a
       [<8104184c>] wake_up_new_task+0x25/0xc2
       [<8102474b>] do_fork+0x15c/0x2a0
       [<810248a9>] kernel_thread+0x1a/0x1f
       [<814232a2>] rest_init+0x1a/0x10e
       [<817af949>] start_kernel+0x303/0x308
       [<817af2ab>] i386_start_kernel+0x79/0x7d

-> #2 (&p->pi_lock){-.-...}:
       [<8104a942>] lock_acquire+0x92/0x101
       [<8142f11d>] _raw_spin_lock_irqsave+0x2e/0x3e
       [<810413dd>] try_to_wake_up+0x1d/0xd6
       [<810414cd>] default_wake_function+0xb/0xd
       [<810461f3>] __wake_up_common+0x39/0x59
       [<81046346>] __wake_up+0x29/0x3b
       [<811b8733>] tty_wakeup+0x49/0x51
       [<811c3568>] uart_write_wakeup+0x17/0x19
       [<811c5dc1>] serial8250_tx_chars+0xbc/0xfb
       [<811c5f28>] serial8250_handle_irq+0x54/0x6a
       [<811c5f57>] serial8250_default_handle_irq+0x19/0x1c
       [<811c56d8>] serial8250_interrupt+0x38/0x9e
       [<810510e7>] handle_irq_event_percpu+0x5f/0x1e2
       [<81051296>] handle_irq_event+0x2c/0x43
       [<81052cee>] handle_level_irq+0x57/0x80
       [<81002a72>] handle_irq+0x46/0x5c
       [<810027df>] do_IRQ+0x32/0x89
       [<8143036e>] common_interrupt+0x2e/0x33
       [<8142f23c>] _raw_spin_unlock_irqrestore+0x3f/0x49
       [<811c25a4>] uart_start+0x2d/0x32
       [<811c2c04>] uart_write+0xc7/0xd6
       [<811bc6f6>] n_tty_write+0xb8/0x35e
       [<811b9beb>] tty_write+0x163/0x1e4
       [<811b9cd9>] redirected_tty_write+0x6d/0x75
       [<810b6ed6>] vfs_write+0x75/0xb0
       [<810b7265>] SyS_write+0x44/0x77
       [<8142f8ee>] syscall_call+0x7/0xb

-> #1 (&tty->write_wait){-.....}:
       [<8104a942>] lock_acquire+0x92/0x101
       [<8142f11d>] _raw_spin_lock_irqsave+0x2e/0x3e
       [<81046332>] __wake_up+0x15/0x3b
       [<811b8733>] tty_wakeup+0x49/0x51
       [<811c3568>] uart_write_wakeup+0x17/0x19
       [<811c5dc1>] serial8250_tx_chars+0xbc/0xfb
       [<811c5f28>] serial8250_handle_irq+0x54/0x6a
       [<811c5f57>] serial8250_default_handle_irq+0x19/0x1c
       [<811c56d8>] serial8250_interrupt+0x38/0x9e
       [<810510e7>] handle_irq_event_percpu+0x5f/0x1e2
       [<81051296>] handle_irq_event+0x2c/0x43
       [<81052cee>] handle_level_irq+0x57/0x80
       [<81002a72>] handle_irq+0x46/0x5c
       [<810027df>] do_IRQ+0x32/0x89
       [<8143036e>] common_interrupt+0x2e/0x33
       [<8142f23c>] _raw_spin_unlock_irqrestore+0x3f/0x49
       [<811c25a4>] uart_start+0x2d/0x32
       [<811c2c04>] uart_write+0xc7/0xd6
       [<811bc6f6>] n_tty_write+0xb8/0x35e
       [<811b9beb>] tty_write+0x163/0x1e4
       [<811b9cd9>] redirected_tty_write+0x6d/0x75
       [<810b6ed6>] vfs_write+0x75/0xb0
       [<810b7265>] SyS_write+0x44/0x77
       [<8142f8ee>] syscall_call+0x7/0xb

-> #0 (&port_lock_key){-.....}:
       [<8104a62d>] __lock_acquire+0x9ea/0xc6d
       [<8104a942>] lock_acquire+0x92/0x101
       [<8142f11d>] _raw_spin_lock_irqsave+0x2e/0x3e
       [<811c60be>] serial8250_console_write+0x8c/0x10c
       [<8104e402>] call_console_drivers.constprop.31+0x87/0x118
       [<8104f5d5>] console_unlock+0x1d7/0x398
       [<8104fb70>] vprintk_emit+0x3da/0x3e4
       [<81425f76>] printk+0x17/0x19
       [<8105bfa0>] clockevents_program_min_delta+0x104/0x116
       [<8105c548>] clockevents_program_event+0xe7/0xf3
       [<8105cc1c>] tick_program_event+0x1e/0x23
       [<8103c43c>] hrtimer_force_reprogram+0x88/0x8f
       [<8103c49e>] __remove_hrtimer+0x5b/0x79
       [<8103cb21>] hrtimer_try_to_cancel+0x49/0x66
       [<8103cb4b>] hrtimer_cancel+0xd/0x18
       [<8107f102>] perf_swevent_cancel_hrtimer.part.60+0x2b/0x30
       [<81080705>] task_clock_event_stop+0x20/0x64
       [<81080756>] task_clock_event_del+0xd/0xf
       [<81081350>] event_sched_out+0xab/0x11e
       [<810813e0>] group_sched_out+0x1d/0x66
       [<81081682>] ctx_sched_out+0xaf/0xbf
       [<81081e04>] __perf_event_task_sched_out+0x1ed/0x34f
       [<8142cacc>] __schedule+0x4c6/0x4cb
       [<8142cae0>] schedule+0xf/0x11
       [<8142f9a6>] work_resched+0x5/0x30

other info that might help us debug this:

Chain exists of:
  &port_lock_key --> &ctx->lock --> hrtimer_bases.lock

 Possible unsafe locking scenario:

       CPU0                    CPU1
       ----                    ----
  lock(hrtimer_bases.lock);
                               lock(&ctx->lock);
                               lock(hrtimer_bases.lock);
  lock(&port_lock_key);

 *** DEADLOCK ***

4 locks held by trinity-main/74:
 #0:  (&rq->lock){-.-.-.}, at: [<8142c6f3>] __schedule+0xed/0x4cb
 #1:  (&ctx->lock){......}, at: [<81081df3>] __perf_event_task_sched_out+0x1dc/0x34f
 #2:  (hrtimer_bases.lock){-.-...}, at: [<8103caeb>] hrtimer_try_to_cancel+0x13/0x66
 #3:  (console_lock){+.+...}, at: [<8104fb5d>] vprintk_emit+0x3c7/0x3e4

stack backtrace:
CPU: 0 PID: 74 Comm: trinity-main Not tainted 3.15.0-rc8-06195-g939f04be #2
 00000000 81c3a310 8b995c14 81426f69 8b995c44 81425a99 8161f671 8161f570
 8161f538 8161f559 8161f538 8b995c78 8b142bb0 00000004 8b142fdc 8b142bb0
 8b995ca8 8104a62d 8b142fac 000016f2 81c3a310 00000001 00000001 00000003
Call Trace:
 [<81426f69>] dump_stack+0x16/0x18
 [<81425a99>] print_circular_bug+0x18f/0x19c
 [<8104a62d>] __lock_acquire+0x9ea/0xc6d
 [<8104a942>] lock_acquire+0x92/0x101
 [<811c60be>] ? serial8250_console_write+0x8c/0x10c
 [<811c6032>] ? wait_for_xmitr+0x76/0x76
 [<8142f11d>] _raw_spin_lock_irqsave+0x2e/0x3e
 [<811c60be>] ? serial8250_console_write+0x8c/0x10c
 [<811c60be>] serial8250_console_write+0x8c/0x10c
 [<8104af87>] ? lock_release+0x191/0x223
 [<811c6032>] ? wait_for_xmitr+0x76/0x76
 [<8104e402>] call_console_drivers.constprop.31+0x87/0x118
 [<8104f5d5>] console_unlock+0x1d7/0x398
 [<8104fb70>] vprintk_emit+0x3da/0x3e4
 [<81425f76>] printk+0x17/0x19
 [<8105bfa0>] clockevents_program_min_delta+0x104/0x116
 [<8105cc1c>] tick_program_event+0x1e/0x23
 [<8103c43c>] hrtimer_force_reprogram+0x88/0x8f
 [<8103c49e>] __remove_hrtimer+0x5b/0x79
 [<8103cb21>] hrtimer_try_to_cancel+0x49/0x66
 [<8103cb4b>] hrtimer_cancel+0xd/0x18
 [<8107f102>] perf_swevent_cancel_hrtimer.part.60+0x2b/0x30
 [<81080705>] task_clock_event_stop+0x20/0x64
 [<81080756>] task_clock_event_del+0xd/0xf
 [<81081350>] event_sched_out+0xab/0x11e
 [<810813e0>] group_sched_out+0x1d/0x66
 [<81081682>] ctx_sched_out+0xaf/0xbf
 [<81081e04>] __perf_event_task_sched_out+0x1ed/0x34f
 [<8104416d>] ? __dequeue_entity+0x23/0x27
 [<81044505>] ? pick_next_task_fair+0xb1/0x120
 [<8142cacc>] __schedule+0x4c6/0x4cb
 [<81047574>] ? trace_hardirqs_off_caller+0xd7/0x108
 [<810475b0>] ? trace_hardirqs_off+0xb/0xd
 [<81056346>] ? rcu_irq_exit+0x64/0x77

Fix the problem by using printk_deferred() which does not call into the
scheduler.
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

Fix the broken check for calling sys_fallocate() on an active swapfile,
introduced by commit 0790b31b ("fs: disallow all fallocate
operation on active swapfile").
Signed-off-by: Eric Biggers <ebiggers3@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

The direct-io.c rewrite to use the iov_iter infrastructure stopped updating
the size field in struct dio_submit, and thus rendered the check for
allowing asynchronous completions to always return false.  Fix this by
comparing it to the count of bytes in the iov_iter instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reported-by: Tim Chen <tim.c.chen@linux.intel.com>
Tested-by: Tim Chen <tim.c.chen@linux.intel.com>

In current R-Car rsnd driver,
the SND_SOC_DAIFMT_xB_xF flags are used to HW default behavior,
but, it should be used to specific format.
The waveforms of LEFT_J/RIGHT_J format with
SND_SOC_DAIFMT_NB_NF flag will be
started from "falling edge" without this patch.
But, it should be started from "rising edge".
Reported-by: Jun Watanabe <jun.watanabe.ue@renesas.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>

Pull ACPI fix from Rafael Wysocki:
 "One commit that fixes a problem causing PNP devices to be associated
  with wrong ACPI device objects sometimes during device enumeration due
  to an incorrect check in a matching function.

  That problem was uncovered by the ACPI device enumeration rework in
  3.14"

* tag 'pm+acpi-3.16-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI / PNP: Fix acpi_pnp_match()

bff58ea4
(ASoC: rsnd: add DVC support) added DVC support,
and it added pcm_new callback feature for it.
Then it called all DAI's pcm_new callback, and it was wrong.
This patch fixup it and call correct callback.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>

b8c63786
(ASoC: rsnd: use regmap_mmio instead of original regmap bus)
used regmap_mmio and modified dev_dbg() for rsnd_read/write().
But rsnd_bset() is missing it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>

R-Car sound uses Audio Local Bus which uses Lch/Rch format.
This bus is used if driver uses BUSIF.
But sound data is written as Rch/Lch format in register.
This means Rch <-> Lch will be inverted.
SSIU :: BUSIF_DALIGN is used to controlling data format.
Reported-by: Jun Watanabe <jun.watanabe.ue@renesas.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>

Driver should care more detail of SRC_BSDSR settings.
The sound includes noise without this patch
if it used SRC.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>

Pull clock driver fix from Mike Turquette:
 "A single patch to re-enable audio which is broken on all DRA7
  SoC-based platforms.  Missed this one from the last set of fixes"

* tag 'clk-fixes-for-linus' of git://git.linaro.org/people/mike.turquette/linux:
  clk: ti: clk-7xx: Correct ABE DPLL configuration

Pull crypto fix from Herbert Xu:
 "This adds missing SELinux labeling to AF_ALG sockets which apparently
  causes SELinux (or at least the SELinux people) to misbehave :)"

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: af_alg - properly label AF_ALG socket

Pull SCSI barrier fix from James Bottomley:
 "This is a potential data corruption fix: If we get an error sending
  down a barrier, we simply ignore it meaning the barrier semantics get
  violated without anyone being any the wiser.  If the system crashes at
  this point, the filesystem potentially becomes corrupt.  Fix is to
  report errors on failed barriers"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: handle flush errors properly

ABE DPLL frequency need to be lowered from 361267200
to 180633600 to facilitate the ATL requironments.
The dpll_abe_m2x2_ck clock need to be set to double
of ABE DPLL rate in order to have correct clocks
for audio.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>