Schemata is displayed in tabular format which introduces some whitespace
to show data in a tabular format.

Writing back the same data fails as the parser does not handle the
whitespace.

Trim the leading and trailing whitespace before parsing.
Reported-by: Prakhya, Sai Praneeth <sai.praneeth.prakhya@intel.com>
Signed-off-by: Vikas Shivappa <vikas.shivappa@linux.intel.com>
Tested-by: Prakhya, Sai Praneeth <sai.praneeth.prakhya@intel.com>
Cc: fenghua.yu@intel.com
Cc: tony.luck@intel.com
Cc: ravi.v.shankar@intel.com
Cc: vikas.shivappa@intel.com
Link: http://lkml.kernel.org/r/1492645804-17465-3-git-send-email-vikas.shivappa@linux.intel.comSigned-off-by: Thomas Gleixner <tglx@linutronix.de>

Currently max width of 'resource name' and 'resource data' is being
initialized based on 'enabled resources' during boot. But the mount can
enable different capable resources at a later time which upsets the
tabular format of schemata. Fix this to be based on 'all capable'
resources.
Signed-off-by: Vikas Shivappa <vikas.shivappa@linux.intel.com>
Tested-by: Prakhya, Sai Praneeth <sai.praneeth.prakhya@intel.com>
Cc: fenghua.yu@intel.com
Cc: tony.luck@intel.com
Cc: ravi.v.shankar@intel.com
Cc: vikas.shivappa@intel.com
Link: http://lkml.kernel.org/r/1492645804-17465-2-git-send-email-vikas.shivappa@linux.intel.comSigned-off-by: Thomas Gleixner <tglx@linutronix.de>

gcc-4.4.3 fails to statically initialize members of a anon union.
See: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=10676

The storage saving is not really worth it and aside of that it will catch
usage of the cache member for bandwidth and vice versa easier.

Fixes: 05b93417 ("x86/intel_rdt/mba: Add primary support for Memory Bandwidth Allocation (MBA)")
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

For better maintenance keep it sorted by numeric model ID. Add new lines to
seperate model groups.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Link: http://lkml.kernel.org/r/20170316155045.50389-1-andriy.shevchenko@linux.intel.comSigned-off-by: Thomas Gleixner <tglx@linutronix.de>

Add support to update the MBA bandwidth values for the domains via the
schemata file.

 - Verify that the bandwidth value is valid

 - Round to the next control step depending on the bandwidth granularity of
   the hardware

 - Convert the bandwidth to delay values and write the delay values to
   the corresponding domain PQOS_MSRs.

[ tglx: Massaged changelog ]
Signed-off-by: Vikas Shivappa <vikas.shivappa@linux.intel.com>
Cc: ravi.v.shankar@intel.com
Cc: tony.luck@intel.com
Cc: fenghua.yu@intel.com
Cc: vikas.shivappa@intel.com
Link: http://lkml.kernel.org/r/1491611637-20417-9-git-send-email-vikas.shivappa@linux.intel.comSigned-off-by: Thomas Gleixner <tglx@linutronix.de>

The schemata files are the user space interface to update resource
controls. The parser is hardwired to support only cache resources, which do
not fit the requirements of memory resources.

Add a function pointer for a parser to the struct rdt_resource and switch
the cache parsing over.

[ tglx: Massaged changelog ]
Signed-off-by: Vikas Shivappa <vikas.shivappa@linux.intel.com>
Cc: ravi.v.shankar@intel.com
Cc: tony.luck@intel.com
Cc: fenghua.yu@intel.com
Cc: vikas.shivappa@intel.com
Link: http://lkml.kernel.org/r/1491611637-20417-8-git-send-email-vikas.shivappa@linux.intel.comSigned-off-by: Thomas Gleixner <tglx@linutronix.de>

The files in the info directory for MBA are as follows:

 num_closids
 	The maximum number of CLOSids available for MBA

 min_bandwidth
 	The minimum memory bandwidth percentage value

 bandwidth_gran
 	The granularity of the bandwidth control in percent for the
	particular CPU SKU. Intermediate values entered are rounded off
	to the previous control step available. Available bandwidth
	control steps are minimum_bandwidth + N * bandwidth_gran.

 delay_linear
 	When set, the OS writes a linear percentage based value to the
	control MSRs ranging from minimum_bandwidth to 100 percent.

	This value is informational and has no influence on the values
	written to the schemata files. The values written to the
	schemata are always bandwidth percentage that is requested.
Signed-off-by: Vikas Shivappa <vikas.shivappa@linux.intel.com>
Cc: ravi.v.shankar@intel.com
Cc: tony.luck@intel.com
Cc: fenghua.yu@intel.com
Cc: vikas.shivappa@intel.com
Link: http://lkml.kernel.org/r/1491611637-20417-7-git-send-email-vikas.shivappa@linux.intel.comSigned-off-by: Thomas Gleixner <tglx@linutronix.de>

Cache allocation and memory bandwidth allocation require different
information files in the resctrl/info directory, but the current
implementation does not allow to have files per resource.

Add the necessary fields to the resource struct and assign the files
dynamically depending on the resource type.
Signed-off-by: Vikas Shivappa <vikas.shivappa@linux.intel.com>
Cc: ravi.v.shankar@intel.com
Cc: tony.luck@intel.com
Cc: fenghua.yu@intel.com
Cc: vikas.shivappa@intel.com
Link: http://lkml.kernel.org/r/1491611637-20417-6-git-send-email-vikas.shivappa@linux.intel.comSigned-off-by: Thomas Gleixner <tglx@linutronix.de>

The MBA feature details like minimum bandwidth supported, bandwidth
granularity etc are obtained via executing CPUID with EAX=10H ,ECX=3.

Setup and initialize the MBA specific extensions to data structures like
global list of RDT resources, RDT resource structure and RDT domain
structure.

[ tglx: Split out the seperate structure and the CBM related parts ]
Signed-off-by: Vikas Shivappa <vikas.shivappa@linux.intel.com>
Cc: ravi.v.shankar@intel.com
Cc: tony.luck@intel.com
Cc: fenghua.yu@intel.com
Cc: vikas.shivappa@intel.com
Link: http://lkml.kernel.org/r/1491611637-20417-5-git-send-email-vikas.shivappa@linux.intel.comSigned-off-by: Thomas Gleixner <tglx@linutronix.de>

Detect MBA feature if CPUID.(EAX=10H, ECX=0):EBX.L2[bit 3] = 1.
Add supporting data structures to detect feature details which is done
in later patch using CPUID with EAX=10H, ECX= 3.
Signed-off-by: Vikas Shivappa <vikas.shivappa@linux.intel.com>
Cc: ravi.v.shankar@intel.com
Cc: tony.luck@intel.com
Cc: fenghua.yu@intel.com
Cc: vikas.shivappa@intel.com
Link: http://lkml.kernel.org/r/1491611637-20417-4-git-send-email-vikas.shivappa@linux.intel.comSigned-off-by: Thomas Gleixner <tglx@linutronix.de>

Updating of Cache and Memory bandwidth QOS MSRs is different.

Add a function pointer to struct rdt_resource and convert the cache part
over.

Based on Vikas all in one patch^Wmess.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: ravi.v.shankar@intel.com
Cc: tony.luck@intel.com
Cc: fenghua.yu@intel.com
Cc: vikas.shivappa@intel.com

Memory bandwidth allocation requires different information than cache
allocation.

To avoid a lump of data in struct rdt_resource, move all cache related
information into a seperate structure and add that to struct rdt_resource.

Sanitize the data types while at it.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: ravi.v.shankar@intel.com
Cc: tony.luck@intel.com
Cc: fenghua.yu@intel.com
Cc: vikas.shivappa@intel.com

Lot of data structures and functions are named after cache specific
resources(named after cbm, cache etc). In many cases other non cache
resources may need to share the same data structures/functions.

Generalize such naming to prepare to add more resources like memory
bandwidth.
Signed-off-by: Vikas Shivappa <vikas.shivappa@linux.intel.com>
Cc: ravi.v.shankar@intel.com
Cc: tony.luck@intel.com
Cc: fenghua.yu@intel.com
Cc: vikas.shivappa@intel.com
Link: http://lkml.kernel.org/r/1491611637-20417-3-git-send-email-vikas.shivappa@linux.intel.comSigned-off-by: Thomas Gleixner <tglx@linutronix.de>

Update the 'intel_rdt_ui' documentation to have Memory bandwidth(b/w)
allocation interface usage.
Signed-off-by: Vikas Shivappa <vikas.shivappa@linux.intel.com>
Cc: ravi.v.shankar@intel.com
Cc: tony.luck@intel.com
Cc: fenghua.yu@intel.com
Cc: vikas.shivappa@intel.com
Link: http://lkml.kernel.org/r/1491611637-20417-2-git-send-email-vikas.shivappa@linux.intel.comSigned-off-by: Thomas Gleixner <tglx@linutronix.de>

Having init functions at random places in the middle of the code is
unintuitive.

Move them close to the init routine and mark them __init.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: ravi.v.shankar@intel.com
Cc: tony.luck@intel.com
Cc: fenghua.yu@intel.com
Cc: vikas.shivappa@intel.com

If no device exists it's pointless to calculate the padding data for the
schemata files.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: ravi.v.shankar@intel.com
Cc: tony.luck@intel.com
Cc: fenghua.yu@intel.com
Cc: vikas.shivappa@intel.com

Conflicts:
	arch/x86/kernel/cpu/intel_rdt_schemata.c
Signed-off-by: Ingo Molnar <mingo@kernel.org>

The schemata lock is released before freeing the resource's temporary
tmp_cbms allocation. That's racy versus another write which allocates and
uses new temporary storage, resulting in memory leaks, freeing in use
memory, double a free or any combination of those.

Move the unlock after the release code.

Fixes: 60ec2440 ("x86/intel_rdt: Add schemata file")
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Shaohua Li <shli@fb.com>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/20170411071446.15241-1-jolsa@kernel.orgSigned-off-by: Thomas Gleixner <tglx@linutronix.de>

Since commit:

  4bcc595c "printk: reinstate KERN_CONT for printing"

... the debug output of signal_fault(), do_trap() and do_general_protection()
looks garbled, e.g.:

 traps: conftest[9335] trap invalid opcode ip:400428 sp:7ffeaba1b0d8 error:0
  in conftest[400000+1000]

(note the unintended line break.)

Fix the bug by adding KERN_CONTs.
Signed-off-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>

The resource control filesystem provides only a bitmask based cpus file for
assigning CPUs to a resource group. That's cumbersome with large cpumasks
and non-intuitive when modifying the file from the command line.

Range based cpu lists are commonly used along with bitmask based cpu files
in various subsystems throughout the kernel.

Add 'cpus_list' file which is CPU range based.

  # cd /sys/fs/resctrl/
  # echo 1-10 > krava/cpus_list
  # cat krava/cpus_list
  1-10
  # cat krava/cpus
  0007fe
  # cat cpus
  fffff9
  # cat cpus_list
  0,3-23

[ tglx: Massaged changelog and replaced "bitmask lists" by "CPU ranges" ]
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Shaohua Li <shli@fb.com>
Link: http://lkml.kernel.org/r/20170410145232.GF25354@kravaSigned-off-by: Thomas Gleixner <tglx@linutronix.de>

The kernel-doc is inconsistently formatted. Fix it up.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vikas Shivappa <vikas.shivappa@linux.intel.com>

The vsyscall32 sysctl can racy against a concurrent fork when it switches
from disabled to enabled:

    arch_setup_additional_pages()
	if (vdso32_enabled)
           --> No mapping
                                        sysctl.vsysscall32()
                                          --> vdso32_enabled = true
    create_elf_tables()
      ARCH_DLINFO_IA32
        if (vdso32_enabled) {
           --> Add VDSO entry with NULL pointer

Make ARCH_DLINFO_IA32 check whether the VDSO mapping has been set up for
the newly forked process or not.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Andy Lutomirski <luto@amacapital.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mathias Krause <minipli@googlemail.com>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/20170410151723.602367196@linutronix.deSigned-off-by: Thomas Gleixner <tglx@linutronix.de>

vdso_enabled can be set to arbitrary integer values via the kernel command
line 'vdso32=' parameter or via 'sysctl abi.vsyscall32'.

load_vdso32() only maps VDSO if vdso_enabled == 1, but ARCH_DLINFO_IA32
merily checks for vdso_enabled != 0. As a consequence the AT_SYSINFO_EHDR
auxiliary vector for the VDSO_ENTRY is emitted with a NULL pointer which
causes a segfault when the application tries to use the VDSO.

Restrict the valid arguments on the command line and the sysctl to 0 and 1.

Fixes: b0b49f26 ("x86, vdso: Remove compat vdso support")
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Acked-by: Andy Lutomirski <luto@amacapital.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: stable@vger.kernel.org
Cc: Roland McGrath <roland@redhat.com>
Link: http://lkml.kernel.org/r/1491424561-7187-1-git-send-email-minipli@googlemail.com
Link: http://lkml.kernel.org/r/20170410151723.518412863@linutronix.deSigned-off-by: Thomas Gleixner <tglx@linutronix.de>

The schemata file displays data from different resources on all
domains. Its cumbersome to read since they are not tabular and data/names
could be of different widths.  Make the schemata file to display data in a
tabular format thereby making it nice and simple to read.
Signed-off-by: Vikas Shivappa <vikas.shivappa@linux.intel.com>
Cc: ravi.v.shankar@intel.com
Cc: tony.luck@intel.com
Cc: fenghua.yu@intel.com
Cc: peterz@infradead.org
Cc: vikas.shivappa@intel.com
Cc: h.peter.anvin@intel.com
Link: http://lkml.kernel.org/r/1491255857-17213-4-git-send-email-vikas.shivappa@linux.intel.comSigned-off-by: Thomas Gleixner <tglx@linutronix.de>

The schemata file can have multiple lines and it is cumbersome to update
all lines.

Remove code that requires that the user provides values for every resource
(in the right order).  If the user provides values for just a few
resources, update them and leave the rest unchanged.

Side benefit: we now check which values were updated and only send IPIs to
cpus that actually have updates.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Vikas Shivappa <vikas.shivappa@linux.intel.com>
Tested-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Cc: ravi.v.shankar@intel.com
Cc: fenghua.yu@intel.com
Cc: peterz@infradead.org
Cc: vikas.shivappa@intel.com
Cc: h.peter.anvin@intel.com
Link: http://lkml.kernel.org/r/1491255857-17213-3-git-send-email-vikas.shivappa@linux.intel.comSigned-off-by: Thomas Gleixner <tglx@linutronix.de>

Put the right values from the original siginfo into the
userspace compat-siginfo.

This fixes the 32-bit MPX "tabletest" testcase on 64-bit kernels.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: <stable@vger.kernel.org> # v4.8+
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Borislav Petkov <bp@suse.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Dmitry Safonov <0x7f454c46@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: a4455082 ('x86/signals: Add missing signal_compat code for x86 features')
Link: http://lkml.kernel.org/r/1491322501-5054-1-git-send-email-joro@8bytes.orgSigned-off-by: Ingo Molnar <mingo@kernel.org>

Pull late GPIO fixes from Linus Walleij:
 "Some late coming ACPI fixes for GPIO.

  We're dealing with ACPI issues here. The first is related to wake IRQs
  on Bay Trail/Cherry Trail CPUs which are common in laptops. The second
  is about proper probe deferral when reading _CRS properties.

  For my untrained eye it seems there was some quarrel between the BIOS
  and the kernel about who is supposed to deal with wakeups from GPIO
  lines"

* tag 'gpio-v4.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
  ACPI / gpio: do not fall back to parsing _CRS when we get a deferral
  gpio: acpi: Call enable_irq_wake for _IAE GpioInts with Wake set

Pull nios2 fix from Ley Foon Tan:

 - nios2: reserve boot memory for device tree

* tag 'nios2-v4.11-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/lftan/nios2:
  nios2: reserve boot memory for device tree

Pull drm fixes from Dave Airlie:
 "This is just mostly stuff that missed rc5, from vmwgfx and msm
  drivers"

* tag 'drm-fixes-for-v4.11-rc6' of git://people.freedesktop.org/~airlied/linux:
  drm/msm: Make sure to detach the MMU during GPU cleanup
  drm/msm/hdmi: redefinitions of macros not required
  drm/msm/mdp5: Update SSPP_MAX value
  drm/msm/dsi: Fix bug in dsi_mgr_phy_enable
  drm/msm: Don't allow zero sized buffer objects
  drm/msm: Fix wrong pointer check in a5xx_destroy
  drm/msm: adreno: fix build error without debugfs
  drm/vmwgfx: fix integer overflow in vmw_surface_define_ioctl()
  drm/vmwgfx: Remove getparam error message
  drm/ttm: Avoid calling drm_ht_remove from atomic context
  drm/ttm, drm/vmwgfx: Relax permission checking when opening surfaces
  drm/vmwgfx: avoid calling vzalloc with a 0 size in vmw_get_cap_3d_ioctl()
  drm/vmwgfx: NULL pointer dereference in vmw_surface_define_ioctl()
  drm/vmwgfx: Type-check lookups of fence objects

Pull Xtensa fixes from Max Filippov:

 - make __pa work with uncached KSEG addresses, it fixes DMA memory
   mmapping and DMA debug

 - fix torn stack dump output

 - wire up statx syscall

* tag 'xtensa-20170403' of git://github.com/jcmvbkbc/linux-xtensa:
  xtensa: wire up statx system call
  xtensa: fix stack dump output
  xtensa: make __pa work with uncached KSEG addresses

misc msm fixes.

* 'msm-fixes-4.11-rc6' of git://people.freedesktop.org/~robclark/linux:
  drm/msm: Make sure to detach the MMU during GPU cleanup
  drm/msm/hdmi: redefinitions of macros not required
  drm/msm/mdp5: Update SSPP_MAX value
  drm/msm/dsi: Fix bug in dsi_mgr_phy_enable
  drm/msm: Don't allow zero sized buffer objects
  drm/msm: Fix wrong pointer check in a5xx_destroy
  drm/msm: adreno: fix build error without debugfs

We should be detaching the MMU before destroying the address
space. To do this cleanly, the detach has to happen in
adreno_gpu_cleanup() because it needs access to structs
in adreno_gpu.c.  Plus it is better symmetry to have
the attach and detach at the same code level.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

4 macros already defined in hdmi.h,
which is not required to redefine in hdmi_audio.c
Signed-off-by: Vinay Simha BN <simhavcs@gmail.com>
Signed-off-by: Rob Clark <robdclark@gmail.com>

'SSPP_MAX + 1' is the max number of hwpipes that can be present on a
MDP5 platform. Recently, 2 new cursor hwpipes were added, which
caused overflows in arrays that used SSPP_MAX to represent the number
of elements. Update the SSPP_MAX value to incorporate the extra
hwpipes.
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

A recent commit introduces a bug in dsi_mgr_phy_enable. In the non
dual DSI mode, we reset the mdsi (master DSI) PHY. This isn't right
since master and slave DSI exist only in dual DSI mode. For the normal
mode of operation, we should simply reset the PHY of the DSI device
(i.e. msm_dsi) corresponding to the current bridge.

Usage of the wrong DSI pointer also resulted in a static checker
warning. That too is resolved with this fix.

Fixes: b62aa70a (drm/msm/dsi: Move PHY operations out of host)
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Rob Clark <robdclark@gmail.com>

Zero sized buffer objects tend to make various bits of the GEM
infrastructure complain:

 WARNING: CPU: 1 PID: 2323 at drivers/gpu/drm/drm_mm.c:389 drm_mm_insert_node_generic+0x258/0x2f0
 Modules linked in:

 CPU: 1 PID: 2323 Comm: drm-api-test Tainted: G        W 4.9.0-rc4-00906-g693af44 #213
 Hardware name: Qualcomm Technologies, Inc. DB820c (DT)
 task: ffff8000d7353400 task.stack: ffff8000d7720000
 PC is at drm_mm_insert_node_generic+0x258/0x2f0
 LR is at drm_vma_offset_add+0x4c/0x70

Zero sized buffers serve no appreciable value to the user so disallow
them at create time.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

Instead of checking for a5xx_gpu->gpmu_iova during destroy we
accidently check a5xx_gpu->gpmu_bo.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

The newly added a5xx support fails to build when debugfs is diabled:

drivers/gpu/drm/msm/adreno/a5xx_gpu.c:849:4: error: 'struct msm_gpu_funcs' has no member named 'show'
drivers/gpu/drm/msm/adreno/a5xx_gpu.c:849:11: error: 'a5xx_show' undeclared here (not in a function); did you mean 'a5xx_irq'?

This adds a missing #ifdef.

Fixes: b5f103ab ("drm/msm: gpu: Add A5XX target support")
Cc: stable@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Rob Clark <robdclark@gmail.com>

Set of vmwgfx fixes
* 'vmwgfx-fixes-4.11' of git://people.freedesktop.org/~thomash/linux:
  drm/vmwgfx: fix integer overflow in vmw_surface_define_ioctl()
  drm/vmwgfx: Remove getparam error message
  drm/ttm: Avoid calling drm_ht_remove from atomic context
  drm/ttm, drm/vmwgfx: Relax permission checking when opening surfaces
  drm/vmwgfx: avoid calling vzalloc with a 0 size in vmw_get_cap_3d_ioctl()
  drm/vmwgfx: NULL pointer dereference in vmw_surface_define_ioctl()
  drm/vmwgfx: Type-check lookups of fence objects

Pull s390 fixes from Martin Schwidefsky:
 "Four bug fixes, two of them for stable:

   - avoid initrd corruptions in the kernel decompressor

   - prevent inconsistent dumps if the boot CPU does not have address
     zero

   - fix the new pkey interface added with the merge window for 4.11

   - a fix for a fix, another issue with user copy zero padding"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/uaccess: get_user() should zero on failure (again)
  s390/pkey: Fix wrong handling of secure key with old MKVP
  s390/smp: fix ipl from cpu with non-zero address
  s390/decompressor: fix initrd corruption caused by bss clear