The lists of algothms checked for existence by
    modprobe tcrypt mode=1000
generates three bogus errors:
    modprobe tcrypt mode=1000

    console log:
    tcrypt: alg rot13 not found
    tcrypt: alg cts not found
    tcrypt: alg arc4 not found

rot13 is not an algorithm in the crypto API or tested.

cts is a wrapper, not a base algorithm.

arc4 is named ecb(arc4), not arc4.

Also, the list is missing numerous algorithms that are tested by
other test modes:
    blake2b-512
    blake2s-256
    crct10dif
    xxhash64
    ghash
    cast5
    sm4
    ansi_prng

Several of the algorithms are only available if
CONFIG_CRYPTO_USER_API_ENABLE_OBSOLETE is enabled:
    arc4
    khazad
    seed
    tea, xtea, xeta

Rather that fix that list, remove test mode=1000 entirely.
It seems to have limited utility, and a web search shows no
discussion of anybody using it.
Suggested-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Robert Elliott <elliott@hpe.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Merge crypto tree to pick up backport of XOR_BLOCKS Kconfig fix.

CRYPTO_LIB_CHACHA_GENERIC doesn't need to select XOR_BLOCKS.  It perhaps
was thought that it's needed for __crypto_xor, but that's not the case.

Enabling XOR_BLOCKS is problematic because the XOR_BLOCKS code runs a
benchmark when it is initialized.  That causes a boot time regression on
systems that didn't have it enabled before.

Therefore, remove this unnecessary and problematic selection.

Fixes: e56e1898 ("lib/crypto: add prompts back to crypto libraries")
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Use KBUILD_MODNAME instead of hard coding the driver name.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

it is unnecessary to call spin_lock_bh in a tasklet.
Signed-off-by: Tuo Cao <91tuocao@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This userspace command:
    modprobe tcrypt
or
    modprobe tcrypt mode=0

runs all the tcrypt test cases numbered <200 (i.e., all the
test cases calling tcrypt_test() and returning return values).

Tests are sparsely numbered from 0 to 1000. For example:
    modprobe tcrypt mode=12
tests sha512, and
    modprobe tcrypt mode=152
tests rfc4543(gcm(aes))) - AES-GCM as GMAC

The test manager generates WARNING crashdumps every time it attempts
a test using an algorithm that is not available (not built-in to the
kernel or available as a module):

    alg: skcipher: failed to allocate transform for ecb(arc4): -2
    ------------[ cut here ]-----------
    alg: self-tests for ecb(arc4) (ecb(arc4)) failed (rc=-2)
    WARNING: CPU: 9 PID: 4618 at crypto/testmgr.c:5777
alg_test+0x30b/0x510
    [50 more lines....]

    ---[ end trace 0000000000000000 ]---

If the kernel is compiled with CRYPTO_USER_API_ENABLE_OBSOLETE
disabled (the default), then these algorithms are not compiled into
the kernel or made into modules and trigger WARNINGs:
    arc4 tea xtea khazad anubis xeta seed

Additionally, any other algorithms that are not enabled in .config
will generate WARNINGs. In RHEL 9.0, for example, the default
selection of algorithms leads to 16 WARNING dumps.

One attempt to fix this was by modifying tcrypt_test() to check
crypto_has_alg() and immediately return 0 if crypto_has_alg() fails,
rather than proceed and return a non-zero error value that causes
the caller (alg_test() in crypto/testmgr.c) to invoke WARN().
That knocks out too many algorithms, though; some combinations
like ctr(des3_ede) would work.

Instead, change the condition on the WARN to ignore a return
value is ENOENT, which is the value returned when the algorithm
or combination of algorithms doesn't exist. Add a pr_warn to
communicate that information in case the WARN is skipped.

This approach allows algorithm tests to work that are combinations,
not provided by one driver, like ctr(blowfish).

Result - no more WARNINGs:
modprobe tcrypt
[  115.541765] tcrypt: testing md5
[  115.556415] tcrypt: testing sha1
[  115.570463] tcrypt: testing ecb(des)
[  115.585303] cryptomgr: alg: skcipher: failed to allocate transform for ecb(des): -2
[  115.593037] cryptomgr: alg: self-tests for ecb(des) using ecb(des) failed (rc=-2)
[  115.593038] tcrypt: testing cbc(des)
[  115.610641] cryptomgr: alg: skcipher: failed to allocate transform for cbc(des): -2
[  115.618359] cryptomgr: alg: self-tests for cbc(des) using cbc(des) failed (rc=-2)
...
Signed-off-by: Robert Elliott <elliott@hpe.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

x86 optimized crypto modules built as modules rather than built-in
to the kernel end up as .ko files in the filesystem, e.g., in
/usr/lib/modules. If the filesystem itself is a module, these might
not be available when the crypto API is initialized, resulting in
the generic implementation being used (e.g., sha512_transform rather
than sha512_transform_avx2).

In one test case, CPU utilization in the sha512 function dropped
from 15.34% to 7.18% after forcing loading of the optimized module.

Add module aliases for this x86 optimized crypto module based on CPU
feature bits so udev gets a chance to load them later in the boot
process when the filesystems are all running.
Signed-off-by: Robert Elliott <elliott@hpe.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Data in the hardware cache needs to be written back to the memory
before the queue memory is released. Currently, the queue memory is
applied for when the driver is loaded and released when the driver is
removed. Therefore, the hardware cache does not need to be written back
when process puts queue.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The dump_show() is used to output hardware information for error locating.
It is not need to apply for memory to temporarily store the converted data.
It can directly output the data. Therefore, remove some unnecessary code.
Signed-off-by: Junchong Pan <panjunchong@hisilicon.com>
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

In the function hisi_qm_memory_init(), if resource alloc fails after
idr_init, the initialized qp_idr needs to be destroyed.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

hpre_cluster_inqry_write() always returns 0. So change the type
of hpre_cluster_inqry_write() to void.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Some cleanup for code:
1. Change names for easy to understand.
2. Unify the variables type.
3. Use the right return value.
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

1.Remove some useless steps during doing requests.
2.Adjust the possibility of branch prediction.
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Acomp API supports NULL destination buffer for compression
and decompression requests. In such cases allocation is
performed by API.

Add test cases for crypto_acomp_compress() and crypto_acomp_decompress()
with dst buffer allocated by API.

Tests will only run if CONFIG_CRYPTO_MANAGER_EXTRA_TESTS=y.
Signed-off-by: Lucas Segarra Fernandez <lucas.segarra.fernandez@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The double `to' is duplicated in the comment, remove one.
Signed-off-by: Jason Wang <wangborong@cdjrlc.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The double `the' is duplicated in the comment, remove one.
Signed-off-by: Jason Wang <wangborong@cdjrlc.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

remove unnecessary void* type casting

v2:
Turn assignments less than 75 characters into one line.
Signed-off-by: Dong Chuanjian <chuanjian@nfschina.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

A quirk for fixing the committed TCB version, when upgrading from a
firmware version earlier than 1.50. This is a known issue, and the
documented workaround is to load the firmware twice.

Currently, this issue requires the  following workaround:

sudo modprobe -r kvm_amd
sudo modprobe -r ccp
sudo modprobe ccp
sudo modprobe kvm_amd

Implement this workaround inside kernel by checking whether the API
version is less than 1.50, and if so, download the firmware twice.
This addresses the TCB version issue.

Link: https://lore.kernel.org/all/de02389f-249d-f565-1136-4af3655fab2a@profian.com/Reported-by: Harald Hoyer <harald@profian.com>
Signed-off-by: Jarkko Sakkinen <jarkko@profian.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Since commit 0166dc11 ("of: make CONFIG_OF user selectable"), it
is possible to test-build any driver which depends on OF on any
architecture by explicitly selecting OF. Therefore depending on
COMPILE_TEST as an alternative is no longer needed.

It is actually better to always build such drivers with OF enabled,
so that the test builds are closer to how each driver will actually be
built on its intended target. Building them without OF may not test
much as the compiler will optimize out potentially large parts of the
code. In the worst case, this could even pop false positive warnings.
Dropping COMPILE_TEST here improves the quality of our testing and
avoids wasting time on non-existent issues.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Declan Murphy <declan.murphy@intel.com>
Cc: Daniele Alessandrelli <daniele.alessandrelli@intel.com>
Cc: Mark Gross <mgross@linux.intel.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Prabhjot Khurana <prabhjot.khurana@intel.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Using pm_runtime_resume_and_get() to instade of  pm_runtime_get_sync
and pm_runtime_put_noidle.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Calls to pci_cleanup_aer_uncorrect_error_status() have already been
removed after commit 62b36c3e ("PCI/AER: Remove
pci_cleanup_aer_uncorrect_error_status() calls"). But in commit
6c6dd580 ("crypto: hisilicon/qm - add controller reset interface")
pci_aer_clear_nonfatal_status() was used again, so remove it in
this patch.

note: pci_cleanup_aer_uncorrect_error_status() was renamed to
pci_aer_clear_nonfatal_status() in commit 894020fd
("PCI/AER: Rationalize error status register clearing")
Signed-off-by: Zhuo Chen <chenzhuo.1@bytedance.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The SMCCC_RET_TRNG_NO_ENTROPY switch arm is never used because the
NO_ENTROPY return value is negative and negative values are handled
above the switch by immediately returning.

Fix by handling errors using a default arm in the switch.

Fixes: 0888d04b ("hwrng: Add Arm SMCCC TRNG based driver")
Signed-off-by: James Cowgill <james.cowgill@blaize.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Module device tables need to be declared as maybe_unused because
they will be unused when built-in and the corresponding option is
also disabled.

This patch adds the maybe_unused attributes to OF and ACPI.  This
also allows us to remove the ifdef around the ACPI data structure.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

There are two deadlock scenarios that need addressing, which cause
problems when the computer goes to sleep, the interface is set down, and
hwrng_unregister() is called. When the deadlock is hit, sleep is delayed
for tens of seconds, causing it to fail. These scenarios are:

1) The hwrng kthread can't be stopped while it's sleeping, because it
   uses msleep_interruptible() which does not react to kthread_stop.

2) A normal user thread can't be interrupted by hwrng_unregister() while
   it's sleeping, because hwrng_unregister() is called from elsewhere.

We solve both issues by add a completion object called dying that
fulfils waiters once we have started the process in hwrng_unregister.

At the same time, we should cleanup a common and useless dmesg splat
in the same area.

Cc: <stable@vger.kernel.org>
Reported-by: Gregory Erwin <gregerwin256@gmail.com>
Fixes: fcd09c90 ("ath9k: use hw_random API instead of directly dumping into random.c")
Link: https://lore.kernel.org/all/CAO+Okf6ZJC5-nTE_EJUGQtd8JiCkiEHytGgDsFGTEjs0c00giw@mail.gmail.com/
Link: https://lore.kernel.org/lkml/CAO+Okf5k+C+SE6pMVfPf-d8MfVPVq4PO7EY8Hys_DVXtent3HA@mail.gmail.com/
Link: https://bugs.archlinux.org/task/75138Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Acked-by: Kalle Valo <kvalo@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

KASAN reported this Bug:

	[17619.659757] BUG: KASAN: global-out-of-bounds in param_get_int+0x34/0x60
	[17619.673193] Read of size 4 at addr fffff01332d7ed00 by task read_all/1507958
	...
	[17619.698934] The buggy address belongs to the variable:
	[17619.708371]  sgl_sge_nr+0x0/0xffffffffffffa300 [hisi_zip]

There is a mismatch in hisi_zip when get/set the variable sgl_sge_nr.
The type of sgl_sge_nr is u16, and get/set sgl_sge_nr by
param_get/set_int.

Replacing param_get/set_int to param_get/set_ushort can fix this bug.

Fixes: f081fda2 ("crypto: hisilicon - add sgl_sge_nr module param for zip")
Signed-off-by: Ye Weihua <yeweihua4@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

No architecture actually defines this, so it's unneeded.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

CRYPTO_LIB_CHACHA depends on CRYPTO for __crypto_xor, defined in
crypto/algapi.c.  This is a layering violation because the dependencies
should only go in the other direction (crypto/ => lib/crypto/).  Also
the correct dependency would be CRYPTO_ALGAPI, not CRYPTO.  Fix this by
moving __crypto_xor into the utils module in lib/crypto/.

Note that CRYPTO_LIB_CHACHA_GENERIC selected XOR_BLOCKS, which is
unrelated and unnecessary.  It was perhaps thought that XOR_BLOCKS was
needed for __crypto_xor, but that's not the case.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

As requested at
https://lore.kernel.org/r/YtEgzHuuMts0YBCz@gondor.apana.org.au, move
__crypto_memneq into lib/crypto/ and put it under a new tristate.  The
tristate is CRYPTO_LIB_UTILS, and it builds a module libcryptoutils.  As
more crypto library utilities are being added, this creates a single
place for them to go without cluttering up the main lib directory.

The module's main file will be lib/crypto/utils.c.  However, leave
memneq.c as its own file because of its nonstandard license.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The function qat_uclo_check_image() validates the MMP and AE firmware
images. If the QAT device supports firmware authentication (indicated
by the handle to firmware loader), the input signed binary MMP and AE
images are validated by parsing the following information:
- Header length
- Full size of the binary
- Type of binary image (MMP or AE Firmware)

Firmware binaries use RSA3K for signing and verification.
The header length for the RSA3k is 0x384 bytes.

All the size field values in the binary are quantified
as DWORDS (1 DWORD = 4bytes).

On an invalid value the function prints an error message and returns
with an error code "EINVAL".
Signed-off-by: Srinivas Kerekare <srinivas.kerekare@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Function of sahara_aes_crypt maybe could be called by function
of crypto_skcipher_encrypt during the rx softirq, so it is not
allowed to use mutex lock.

Fixes: c0c3c89a ("crypto: sahara - replace tasklets with...")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Radix tree header includes gfp.h for __GFP_BITS_SHIFT only. Now we
have gfp_types.h for this.

Fixes powerpc allmodconfig build:

   In file included from include/linux/nodemask.h:97,
                    from include/linux/mmzone.h:17,
                    from include/linux/gfp.h:7,
                    from include/linux/radix-tree.h:12,
                    from include/linux/idr.h:15,
                    from include/linux/kernfs.h:12,
                    from include/linux/sysfs.h:16,
                    from include/linux/kobject.h:20,
                    from include/linux/pci.h:35,
                    from arch/powerpc/kernel/prom_init.c:24:
   include/linux/random.h: In function 'add_latent_entropy':
>> include/linux/random.h:25:46: error: 'latent_entropy' undeclared (first use in this function); did you mean 'add_latent_entropy'?
      25 |         add_device_randomness((const void *)&latent_entropy, sizeof(latent_entropy));
         |                                              ^~~~~~~~~~~~~~
         |                                              add_latent_entropy
   include/linux/random.h:25:46: note: each undeclared identifier is reported only once for each function it appears in
Reported-by: kernel test robot <lkp@intel.com>
CC: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
CC: Andrew Morton <akpm@linux-foundation.org>
CC: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull vfs lseek fix from Al Viro:
 "Fix proc_reg_llseek() breakage. Always had been possible if somebody
  left NULL ->proc_lseek, became a practical issue now"

* tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  take care to handle NULL ->proc_lseek()

Easily done now, just by clearing FMODE_LSEEK in ->f_mode
during proc_reg_open() for such entries.

Fixes: 868941b1 "fs: remove no_llseek"
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Pull more xen updates from Juergen Gross:

 - fix the handling of the "persistent grants" feature negotiation
   between Xen blkfront and Xen blkback drivers

 - a cleanup of xen.config and adding xen.config to Xen section in
   MAINTAINERS

 - support HVMOP_set_evtchn_upcall_vector, which is more compliant to
   "normal" interrupt handling than the global callback used up to now

 - further small cleanups

* tag 'for-linus-6.0-rc1b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  MAINTAINERS: add xen config fragments to XEN HYPERVISOR sections
  xen: remove XEN_SCRUB_PAGES in xen.config
  xen/pciback: Fix comment typo
  xen/xenbus: fix return type in xenbus_file_read()
  xen-blkfront: Apply 'feature_persistent' parameter when connect
  xen-blkback: Apply 'feature_persistent' parameter when connect
  xen-blkback: fix persistent grants negotiation
  x86/xen: Add support for HVMOP_set_evtchn_upcall_vector

Merge tag 'perf-tools-fixes-for-v6.0-2022-08-13' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux

Pull more perf tool updates from Arnaldo Carvalho de Melo:

 - 'perf c2c' now supports ARM64, adjust its output to cope with
   differences with what is in x86_64. Now go find false sharing on
   ARM64 (at least Neoverse) as well!

 - Refactor the JSON processing, making the output more compact and thus
   reducing the size of the resulting perf binary

 - Improvements for 'perf offcpu' profiling, including tracking child
   processes

 - Update Intel JSON metrics and events files for broadwellde,
   broadwellx, cascadelakex, haswellx, icelakex, ivytown, jaketown,
   knightslanding, sapphirerapids, skylakex and snowridgex

 - Add 'perf stat' JSON output and a 'perf test' entry for it

 - Ignore memfd and anonymous mmap events if jitdump present

 - Refactor 'perf test' shell tests allowing subdirs

 - Fix an error handling path in 'parse_perf_probe_command()'

 - Fixes for the guest Intel PT tracing patchkit in the 1st batch of
   this merge window

 - Print debuginfod queries if -v option is used, to explain delays in
   processing when debuginfo servers are enabled to fetch DSOs with
   richer symbol tables

 - Improve error message for 'perf record -p not_existing_pid'

 - Fix openssl and libbpf feature detection

 - Add PMU pai_crypto event description for IBM z16 on 'perf list'

 - Fix typos and duplicated words on comments in various places

* tag 'perf-tools-fixes-for-v6.0-2022-08-13' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (81 commits)
  perf test: Refactor shell tests allowing subdirs
  perf vendor events: Update events for snowridgex
  perf vendor events: Update events and metrics for skylakex
  perf vendor events: Update metrics for sapphirerapids
  perf vendor events: Update events for knightslanding
  perf vendor events: Update metrics for jaketown
  perf vendor events: Update metrics for ivytown
  perf vendor events: Update events and metrics for icelakex
  perf vendor events: Update events and metrics for haswellx
  perf vendor events: Update events and metrics for cascadelakex
  perf vendor events: Update events and metrics for broadwellx
  perf vendor events: Update metrics for broadwellde
  perf jevents: Fold strings optimization
  perf jevents: Compress the pmu_events_table
  perf metrics: Copy entire pmu_event in find metric
  perf pmu-events: Hide the pmu_events
  perf pmu-events: Don't assume pmu_event is an array
  perf pmu-events: Move test events/metrics to JSON
  perf test: Use full metric resolution
  perf pmu-events: Hide pmu_events_map
  ...

Pull powerpc fixes from Michael Ellerman:

 - Ensure we never emit lwarx with EH=1 on 32-bit, because some 32-bit
   CPUs trap on it rather than ignoring it as they should.

 - Fix ftrace when building with clang, which was broken by some
   refactoring.

 - A couple of other minor fixes.

Thanks to Christophe Leroy, Naveen N.  Rao, Nick Desaulniers, Ondrej
Mosnacek, Pali Rohár, Russell Currey, and Segher Boessenkool.

* tag 'powerpc-6.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/kexec: Fix build failure from uninitialised variable
  powerpc/ppc-opcode: Fix PPC_RAW_TW()
  powerpc64/ftrace: Fix ftrace for clang builds
  powerpc: Make eh value more explicit when using lwarx
  powerpc: Don't hide eh field of lwarx behind a macro
  powerpc: Fix eh field when calling lwarx on PPC32

Pull /proc/mounts fix from Al Viro:
 "Fix for /proc/mounts escaping - escape the '#' character too"

* tag 'pull-work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  vfs: escape hash as well

Pull more cifs updates from Steve French:

 - two fixes for stable, one for a lock length miscalculation, and
   another fixes a lease break timeout bug

 - improvement to handle leases, allows the close timeout to be
   configured more safely

 - five restructuring/cleanup patches

* tag '5.20-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: Do not access tcon->cfids->cfid directly from is_path_accessible
  cifs: Add constructor/destructors for tcon->cfid
  SMB3: fix lease break timeout when multiple deferred close handles for the same file.
  smb3: allow deferred close timeout to be configurable
  cifs: Do not use tcon->cfid directly, use the cfid we get from open_cached_dir
  cifs: Move cached-dir functions into a separate file
  cifs: Remove {cifs,nfs}_fscache_release_page()
  cifs: fix lock length calculation

Enable multipage folio support for the afs filesystem.

Support has already been implemented in netfslib, fscache and cachefiles
and in most of afs, but I've waited for Matthew Wilcox's latest folio
changes.

Note that it does require a change to afs_write_begin() to return the
correct subpage.  This is a "temporary" change as we're working on
getting rid of the need for ->write_begin() and ->write_end()
completely, at least as far as network filesystems are concerned - but
it doesn't prevent afs from making use of the capability.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: kafs-testing@auristor.com
Cc: Marc Dionne <marc.dionne@auristor.com>
Cc: linux-afs@lists.infradead.org
Link: https://lore.kernel.org/lkml/2274528.1645833226@warthog.procyon.org.uk/Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>