- 21 Jun, 2015 37 commits
-
-
Paul Burton authored
When probing the interrupt controller, register an IRQ domain such that the interrupts can be translated by devicetree code & thus used from devicetree. Signed-off-by:
Paul Burton <paul.burton@imgtec.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: Brian Norris <computersforpeace@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/10140/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
Paul Burton authored
Rather than hardcoding the IRQ number used to cascade interrupts from the SoC interrupt controller to the CPU interrupt controller, read that IRQ number from the DT describing the system. Signed-off-by:
-
Paul Burton authored
Declare the JZ4740 interrupt controller for probe via DT using the standard irqchip_init function, and make use of that function to probe the controller by adding the appropriate node to the JZ4740 dtsi. Signed-off-by:
-
Paul Burton authored
Add binding documentation for Ingenic SoC interrupt controllers. Signed-off-by:
Rob Herring <robh@kernel.org> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Kumar Gala <galak@codeaurora.org> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: devicetree@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/10134/Signed-off-by:
-
Paul Burton authored
In preparation for moving the JZ4740 interrupt controller driver to drivers/irqchip, move arch_init_irq into setup.c such that everything remaining in irq.c is related to said JZ4740 interrupt controller. Signed-off-by:
-
Paul Burton authored
Make use of the generic plat_irq_dispatch function introduced by commit 85f7cdac "MIPS: Provide a generic plat_irq_dispatch", in order to reduce unnecessary code duplication. Signed-off-by:
-
Paul Burton authored
Use the generic irqchip_init function to probe irqchip drivers using DT, and add the appropriate node to the JZ4740 devicetree in place of the call to mips_cpu_irq_init. Signed-off-by:
-
Paul Burton authored
Allow the MIPS CPU interrupt controller to be probed from DT using the generic __irqchip_of_table for platforms which use irqchip_init. This will avoid such platforms needing to duplicate the compatible string & init function pointer. [ralf@linux-mips.org: Resolved conflict due the preceeding commit that moves irq-cpu.c. Signed-off-by:
-
Ralf Baechle authored
While at it, rename it because in drivers/irqchip no longer every CPU is a MIPS. Signed-off-by: -
Paul Burton authored
Require a DT for JZ4740 based systems, and add a stub one for the qi_lb60 (Ben NanoNote) board. Devices will be migrated to being probed via this DT over time. Signed-off-by:
-
Paul Burton authored
Ingenic have actually varied the vendor/company ID of the XBurst cores across their range of SoCs, whilst keeping the product ID & revision constant... Add definitions for vendor IDs known to be used in some of Ingenic's newer SoCs, and handle them in the same way as the existing Ingenic vendor ID from the JZ4740. Signed-off-by:
Paul Cercueil <paul@crapouillou.net> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: linux-mips@linux-mips.org Cc: Steven J. Hill <Steven.Hill@imgtec.com> Cc: Joshua Kinard <kumba@gentoo.org> Cc: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Cc: Maciej W. Rozycki <macro@linux-mips.org> Cc: linux-kernel@vger.kernel.org Cc: Huacai Chen <chenhc@lemote.com> Cc: Markos Chandras <markos.chandras@imgtec.com> Patchwork: https://patchwork.linux-mips.org/patch/10128/Signed-off-by:
-
Paul Burton authored
In preparation for supporting Ingenic SoCs other than the JZ4740, introduce MACH_INGENIC to Kconfig & move MACH_JZ4740 to a separate entry selected by the board when appropriate. This allows MACH_INGENIC to be used to enable things generic across Ingenic SoCs. Signed-off-by:
-
Paul Burton authored
Define a vendor prefix for Qi Hardware, creators of the Ben Nanonote (qi_lb60) among other open devices. Signed-off-by:
-
Paul Burton authored
Define a vendor prefix for Ingenic Semiconductor, a vendor of MIPS-based SoCs. Simply use 'ingenic'. Signed-off-by:
-
Maciej W. Rozycki authored
Update CPU overrides for the DEC port with the recent additions, shaving off some effectively dead code: text data bss dec hex filename 5586952 233132 5990368 11810452 b43694 vmlinux.32-old 5581248 233140 5990368 11804756 b42054 vmlinux.32-new text data bss dec hex filename 6036936 356648 10756544 17150128 105b0b0 vmlinux.64-old 6029896 360752 10756544 17147192 105a538 vmlinux.64-new The data size increase is due to the special alignment requirement of `init_thread_union' aka `.data..init_task' moving it up to the nearest page boundary and making the amount of padding at its front rely on how far within a page text ends. Signed-off-by:
Maciej W. Rozycki <macro@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10197/Signed-off-by:
-
Brian Norris authored
The cmdlinepart parser is already supported in the default probe. Signed-off-by:
Brian Norris <computersforpeace@gmail.com> Cc: linux-mtd@lists.infradead.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10071/Signed-off-by:
-
Maciej W. Rozycki authored
Replace an explicit barrier with a useful processor instruction in TLB invalidation, following several other such cases elsewhere in `tlb-r3k.c'. Signed-off-by:
-
Maciej W. Rozycki authored
Move the initialisation of the CP0.Wired register implemented by Toshiba TX3922 and TX3927 processors from `tx39_cache_init' to `tlb_init' where it belongs, correcting code structure and making sure initialisation does not rely on `tx39_cache_init' being called before `tlb_init' to work correctly. Make `r3k_have_wired_reg' static as it's no longer externally referred to; remove a stale declaration too. Signed-off-by:
-
Maciej W. Rozycki authored
Most R3k processor implementations have their 8 first TLB entries fixed as wired, so we always skip them in TLB invalidation. That however means any leftover entries present there at boot will stay throughout the life of the kernel, unless replaced with new ones. So rename `local_flush_tlb_all' to `local_flush_tlb_from' and make it accept the TLB entry to start from. Then use 0 initially at bootstrap, and the first regular entry later on, bypassing any wired entries. Wrap the latter arrangement into a new `local_flush_tlb_all' entry point. There is no need to disable interrupts in the call made from `tlb_init' because it's made before the interrupt subsystem has been initialised; this is also true for secondary processors, should we ever support R3k SMP. So move this piece of code to new `local_flush_tlb_all'. Signed-off-by:
-
James Hogan authored
XPA extends the physical addresses on MIPS32, including the EntryLo registers. Update dump_tlb() to concatenate the PFNX field from the high end of the EntryLo registers (as read by mfhc0). The width of physical and virtual addresses are also separated to show only 8 nibbles of virtual but 11 nibbles of physical with XPA. Signed-off-by:
James Hogan <james.hogan@imgtec.com> Cc: Steven J. Hill <Steven.Hill@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10077/Signed-off-by:
-
James Hogan authored
The RI/XI bits when present are above the PFN field in the EntryLo registers, at bits 63,62 when read with dmfc0, and bits 31,30 when read with mfc0. This makes them appear as part of the physical address, since the other bits are masked with PAGE_MASK, for example: Index: 253 pgmask=16kb va=77b18000 asid=75 [pa=1000744000 c=5 d=1 v=1 g=0] [pa=100134c000 c=5 d=1 v=1 g=0] The physical addresses have bit 36 set, which corresponds to bit 30 of EntryLo1, the XI bit. Explicitly mask off the RI and XI bits from the printed physical address, and print the RI and XI bits separately if they exist, giving output more like this: Index: 226 pgmask=16kb va=77be0000 asid=79 [ri=0 xi=1 pa=01288000 c=5 d=1 v=1 g=0] [ri=0 xi=0 pa=010e4000 c=5 d=0 v=1 g=0] Cc: linux-mips@linux-mips.org Cc: James Hogan <james.hogan@imgtec.com> Cc: David Daney <ddaney@caviumnetworks.com> Patchwork: https://patchwork.linux-mips.org/patch/10080/Signed-off-by: -
James Hogan authored
The EHINV bit in EntryHi allows a TLB entry to be properly marked invalid so that EntryHi doesn't have to be set to a unique value to avoid machine check exceptions due to multiple matching entries. Unfortunately dump_tlb() doesn't take this into account so it will print all the uninteresting invalid TLB entries if the current ASID happens to be 00. Therefore add a condition to skip entries which are marked invalid with the EHINV bit. Signed-off-by:
-
James Hogan authored
The TLB only matches the ASID when the global bit isn't set, so dump_tlb() shouldn't really be skipping global entries just because the ASID doesn't match. Fix the condition to read the TLB entry's global bit from EntryLo0. Note that after a TLB read the global bits in both EntryLo registers reflect the same global bit in the TLB entry. Signed-off-by:
-
James Hogan authored
Make use of recently added EntryLo bit definitions in mipsregs.h when dumping TLB contents. Signed-off-by:
-
James Hogan authored
Refactor the TLB matching code in dump_tlb() slightly so that the conditions which can cause a TLB entry to be skipped can be more easily extended. This should prevent the match condition getting unwieldy once it is updated to take further conditions into account. Signed-off-by:
-
James Hogan authored
Use the new tlb read hazard macros from <asm/hazards.h> rather than the local BARRIER() macro which uses 7 ops regardless of the kernel configuration. We use mtc0_tlbr_hazard for the hazard between mtc0 to the index register and the tlbr, and tlb_read_hazard for the hazard between the tlbr and the mfc0 of the TLB registers written by tlbr. Signed-off-by:
-
James Hogan authored
Add definitions for EntryLo register bits in mipsregs.h. The R4000 compatible ones are prefixed MIPS_ENTRYLO_ and the R3000 compatible ones are prefixed R3K_ENTRYLO_. These will be used in later patches. Signed-off-by:
-
James Hogan authored
Add hazard macros to <asm/hazards.h> for the following hazards around tlbr (TLB read) instructions, which are used in TLB dumping code and some KVM TLB management code: - mtc0_tlbr_hazard Between mtc0 (Index) and tlbr. This is copied from mtc0_tlbw_hazard in all cases on the assumption that tlbr always has similar data user timings to tlbw. - tlb_read_hazard Between tlbr and mfc0 (various TLB registers). This is copied from tlbw_use_hazard in all cases on the assumption that tlbr has similar data writer characteristics to tlbw, and mfc0 has similar data user characteristics to loads and stores. Signed-off-by:
-
James Hogan authored
Add a MIPS specific SysRq operation to dump the TLB entries on all CPUs, using the 'x' trigger key. Signed-off-by:
-
Petri Gynther authored
Print Exception Code when printing the Cause register. Signed-off-by:
Petri Gynther <pgynther@google.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9998/Signed-off-by:
-
Rafał Miłecki authored
Extra bcma buses may be totally different models, see following dump: boardtype=0x0646 pci/1/1/boardtype=0x0545 pci/2/1/boardtype=0x62b We need to detect them properly to allow drivers apply some board specific hacks. [ralf@linux-mips.org: folded in Rafal's fix.] Signed-off-by:
Rafał Miłecki <zajec5@gmail.com> Cc: linux-mips@linux-mips.org Cc: Hauke Mehrtens <hauke@hauke-m.de> Patchwork: https://patchwork.linux-mips.org/patch/10028/ Patchwork: https://patchwork.linux-mips.org/patch/10048/Signed-off-by:
-
Rafał Miłecki authored
New devices may have more than 1 Ethernet core (device). We should extract info about them to make it available to Ethernet drivers. Signed-off-by:
-
Rafał Miłecki authored
For years we planned to get rid of old u16 fields, let's start doing it with MIPS code. This process will take some time, it requires doing the same in ssb/bcma and then switching all drivers to new fields. This will be handled in separated patches submitted to appropriate trees. Signed-off-by:
-
Rafał Miłecki authored
First of all it shouldn't modify copied NVRAM just to make sure it can loop over all entries. It's enough to just compare current position pointer with the end of buffer address. Secondly buffer is guaranteed to be \0 ended, so we don't need strnchr. Signed-off-by:
-
Rafał Miłecki authored
This will simplify reading its contents. Signed-off-by:
-
Ralf Baechle authored
Signed-off-by: -
Ralf Baechle authored
All the necessary support code is already there so all that's left is to enable the feature in kconfig. Signed-off-by:
-
- 15 Jun, 2015 3 commits
-
-
Linus Torvalds authored
-
git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds authored
Pull dmaengine fixes from Vinod Koul: "Here are hopefully last set of fixes for 4.1. This time we have: - fixing pause capability reporting on both dmaengine pause & resume support by Krzysztof - locking fix fir at_xdmac by Ludovic - slave configuration fix for at_xdmac by Ludovic" * 'fixes' of git://git.infradead.org/users/vkoul/slave-dma: dmaengine: Fix choppy sound because of unimplemented resume dmaengine: at_xdmac: rework slave configuration part dmaengine: at_xdmac: lock fixes -
git://github.com/jonmason/ntbLinus Torvalds authored
Pull NTB fixes from Jon Mason: "I apologize for the tardiness of this request. Here are a couple of last minute NTB bug fixes for v4.1: NTB bug fixes to address issues in unmapping the MW reg base and vbase, and an uninitialized variable on Atom platforms" * tag 'ntb-4.1' of git://github.com/jonmason/ntb: ntb: initialize max_mw for Atom before using it ntb: iounmap MW reg and vbase in error path
-
