the verifier got progressively smarter over time and size of its internal
state grew as well. Time to reduce the memory consumption.

Before:
sizeof(struct bpf_verifier_state) = 6520
After:
sizeof(struct bpf_verifier_state) = 896

It's done by observing that majority of BPF programs use little to
no stack whereas verifier kept all of 512 stack slots ready always.
Instead dynamically reallocate struct verifier state when stack
access is detected.
Runtime difference before vs after is within a noise.
The number of processed instructions stays the same.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Vijaya Mohan Guvva says:

====================
liquidio: switchdev support for LiquidIO NIC

patch1 of this patch set adds switchdev support for SRIOV capable
LiquidIO NIC, so that for every SRIOV VF on LiquidIO, a representor
netdev is created on hypervisor. It also has changes to send representor
interface configurations like admin state and MTU to LiquidIO firmware and
to retrieve HW counted VF stats for VF representor.

patch2 adds support for switchdev enable/disable from devlink

Patchset Change Log:
  V2 -> V3:
    * Use mac address as the physical switchID.
    * Check for eswitch_mode before returning switchID

  V1 -> V2:
    * Name the representors "pfXvfY".
    * Drop patch3 (ethtool support for switchdev ports) that was in V1
      because it's not necessary.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Enable and disable switchdev on SRIOV capable LiquidIO NIC with devlink.
Create representor netdev for each SRIOV VF function on SRIOV enable and
and do the cleanup on SRIOV disable.
Signed-off-by: Vijaya Mohan Guvva <vijaya.guvva@cavium.com>
Signed-off-by: Satanand Burla <satananda.burla@cavium.com>
Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@cavium.com>
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Enable switchdev for SRIOV capable LiquidIO NIC. It registers
a representor netdev (with switchdev_ops) for each SRIOV VF created.
It also has changes to send representor interface configurations like
admin state and MTU to LiquidIO firmware and to retrieve HW counted
VF stats for VF representor.
Signed-off-by: Vijaya Mohan Guvva <vijaya.guvva@cavium.com>
Signed-off-by: Satanand Burla <satananda.burla@cavium.com>
Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@cavium.com>
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Saeed Mahameed says:

====================
mlx5-updates-2017-10-31 mlx5e stats groups

This series from Kamal introduces an important refactoring for mlx5e stats
handling, which groups the stats into generic groups structure which allows
to control the behavior and stats reporting per group in a modular way.

In the first patch Kamal introduces a new data type "mlx5e_stats_grp" This change
defines a new API to create a group of stats and simplifies the way of handling them.
This struct will define the following behavior per group:
    - get_num_stats() - return the number of counters in the group.
    - fill_strings() - fill counters strings within the group.
    - fill_stats() - fill counters values within the group.

All other patches will be straight forward refactoring per stats group,
where Kamal will move each mlx5e stats group to use the new API.

The idea is to have better flexibility and modularity to add new counters,
all ethtool logic was rendered generic and loops through the generic stats groups and
calls the groups callbacks to figure out how and what to report back to user space.

Introducing new file en_stats.c to hold all the new stat groups logic and implementation.
Static structures (counters descriptors) moved from en_stats.h to en_stats.c which reduces
the mlx5_core binary footprint, originally reported and addressed by Stephen Hemminger:
("mlx5: fix space waste from ethtool descriptions") which was waived due to this re-design.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Jeff Kirsher says:

====================
40GbE Intel Wired LAN Driver Updates 2017-10-31

This series contains updates to i40e, i40evf and net/sched.

Arnd Bergmann cleans up the power management code to resolve a build
warning.

Shannon Nelson fixes i40e to only redistribute our vectors when we did
not get the full count that we requested.

Alex reverts a previous commit because it potentially causes a memory leak
when combined with the current page recycling scheme.

Amritha enables configuring cloud filters in i40e using the tc-flower
classifier.  The classification function of the filter is to match a
packet to a traffic class.  cls_flower is extended to offload classid to
hardware.  Hardware traffic classes are identified using classid values
reserved in the range :ffe0 - :ffef.
The cloud filters are added for a VSI and are cleaned up when the VSI is
deleted. The filters that match on L4 ports needs enhanced admin queue
functions with big buffer support for extended fields in cloud filter
commands.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

tdc.py reads a bunch of test cases in json files.  When a json file
cannot be parsed, tdc just exits and does not run any tests.

This patch will cause tdc to print a message with the file name and
line number, then that file will be ignored and the rest of the tests
will be processed.
Signed-off-by: Brenda J. Butler <bjb@mojatatu.com>
Acked-by: Lucas Bates <lucasb@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Check if tcase[k] is an instance of a list (is or is derived from list)
instead of checking if it is a list.

This will be useful if the data structures change to be something
that implements list, instead of being an actual list.  In that
case, this code will not have to change.
Signed-off-by: Brenda J. Butler <bjb@mojatatu.com>
Acked-by: Lucas Bates <lucasb@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Brenda J. Butler <bjb@mojatatu.com>
Acked-by: Lucas Bates <lucasb@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Move the config customization into a site-local file
tdc_config_local.py, so that updates of the tdc test
software does not require hand-editing of the config.
This patch includes a template for the site-local
customization file.

In addition, this makes it easy to revert to a stock
tdc environment for testing the test framework and/or
the core tests.

Also it makes it harder for any custom config to be
submitted back to the kernel tdc.
Signed-off-by: Brenda J. Butler <bjb@mojatatu.com>
Acked-by: Lucas Bates <lucasb@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Ignore .pyc files, "python compiled" files, that get created
when a python script is run.  They should never be committed.
Signed-off-by: Brenda J. Butler <bjb@mojatatu.com>
Acked-by: Lucas Bates <lucasb@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

As part of documentation, supply some very simple test cases
to illustrate how test cases work.  One test case shows
commands in the setup, command, verify and teardown stages.
Other test cases show how to have a working test case that
does not have commands in the setup, verify and/or teardown
stages.

Specifically, the command lists for setup and teardown can
be empty.  And the verify command must have a command, but
it can be /bin/true.  The regex must have a string, we
recommend a single space, and the count of matches must be
zero if you do not want to use the match feature of verify.
Verify will always look for a return code of success (0)
so we give /bin/true when we do not want to make a check
there.

Also, update the documentation for testcases to be more
specific in the cases of:

    - accepting non-success return codes in setup and
      teardown stages
    - how to write the test when no setup, teardown
      and/or verify are desired.

To run the example test cases:

    $ sudo -E ./tdc.py -f creating-testcases/example.json -l
    1f: (example) simple test to test framework
    2f: (example) simple test, no need for verify
    3f: (example) simple test, no need for setup or teardown (or verify)
    $ sudo -E ./tdc.py -f creating-testcases/example.json
    Test 1f: simple test to test framework
    Test 2f: simple test, no need for verify
    Test 3f: simple test, no need for setup or teardown (or verify)
    All test results:

    1..3
    ok 1 1f simple test to test framework
    ok 2 2f simple test, no need for verify
    ok 3 3f simple test, no need for setup or teardown (or verify)

    $
Signed-off-by: Brenda J. Butler <bjb@mojatatu.com>
Acked-by: Lucas Bates <lucasb@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Guillaume Nault says:

====================
l2tp: remove unused code

Patch #1 removes the ref/deref mechanism that was originally used to
prevent ppp pseudowires from dropping their sockets. This mechanism
was error prone and isn't used anymore.

Patch #2 removes some module specific refcount debugging.
Patches #3 and #4 take care of some dead code.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

This field has never been used.
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>

These variables have never been used.
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>

With conversion to refcount_t, such manual debugging code doesn't make
sense anymore.
The tunnel part was already dropped by
54652eb1 ("l2tp: hold tunnel while looking up sessions in l2tp_netlink").
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>

The ->ref() and ->deref() callbacks are unused since PPP stopped using
them in ee40fb2e ("l2tp: protect sock pointer of struct pppol2tp_session with RCU").

We can thus remove them from struct l2tp_session and drop the do_ref
parameter of l2tp_session_get*().
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>

Switch the channels counters to use the new stats group API.
Signed-off-by: Kamal Heib <kamalh@mellanox.com>
Reviewed-by: Gal Pressman <galp@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Switch the ipsec counters to use the new stats group API.
Signed-off-by: Kamal Heib <kamalh@mellanox.com>
Reviewed-by: Gal Pressman <galp@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Switch the pme counters to use the new stats group API.
Signed-off-by: Kamal Heib <kamalh@mellanox.com>
Reviewed-by: Gal Pressman <galp@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Switch the per prio pfc counters to use the new stats group API.
Signed-off-by: Kamal Heib <kamalh@mellanox.com>
Reviewed-by: Gal Pressman <galp@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Switch the per prio traffic counters to use the new stats group API.
Signed-off-by: Kamal Heib <kamalh@mellanox.com>
Reviewed-by: Gal Pressman <galp@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Switch the pcie counters to use the new stats group API.
Signed-off-by: Kamal Heib <kamalh@mellanox.com>
Reviewed-by: Gal Pressman <galp@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Switch the ethernet extended counters to use the new stats group API.
Signed-off-by: Kamal Heib <kamalh@mellanox.com>
Reviewed-by: Gal Pressman <galp@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Switch the physical statistical counters to use the new stats group API.
Signed-off-by: Kamal Heib <kamalh@mellanox.com>
Reviewed-by: Gal Pressman <galp@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Switch the RFC 2819 counters to use the new stats group API.
Signed-off-by: Kamal Heib <kamalh@mellanox.com>
Reviewed-by: Gal Pressman <galp@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Switch the RFC 2863 counters to use the new stats group API.
Signed-off-by: Kamal Heib <kamalh@mellanox.com>
Reviewed-by: Gal Pressman <galp@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Switch the IEEE 802.3 counters to use the new stats group API.
Signed-off-by: Kamal Heib <kamalh@mellanox.com>
Reviewed-by: Gal Pressman <galp@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Switch the vport counters to use the new stats group API.
Signed-off-by: Kamal Heib <kamalh@mellanox.com>
Reviewed-by: Gal Pressman <galp@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Switch the Q counters to use the new stats group API.
Signed-off-by: Kamal Heib <kamalh@mellanox.com>
Reviewed-by: Gal Pressman <galp@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Currently the mlx5e driver has multiple groups of stats, each group is
used for different purposes and it may depend on hardware capabilities
or not. The problem with the current implementation is that there is no
clear API to create a new group of stats.

This change define a new API to create a group of stats and simplifies
the way of handling them by defining a new struct "mlx5e_stats_grp" which
have the following three function pointers:
- get_num_stats() - return the number of counters in the group.
- fill_strings() - fill counters strings within the group.
- fill_stats() - fill counters values within the group.

The above function pointers are used within the ethtool callbaks while
calling "ethtool -S" from userspace. This change also switch the SW
group to use the new API.
Signed-off-by: Kamal Heib <kamalh@mellanox.com>
Reviewed-by: Gal Pressman <galp@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

This patch enables tc-flower based hardware offloads. tc flower
filter provided by the kernel is configured as driver specific
cloud filter. The patch implements functions and admin queue
commands needed to support cloud filters in the driver and
adds cloud filters to configure these tc-flower filters.

The classification function of the filter is to direct matched
packets to a traffic class. The hardware traffic class is set
based on the the classid reserved in the range :ffe0 - :ffef.

Match Dst MAC and route to TC0:
  prio 1 flower dst_mac 3c:fd:fe:a0:d6:70 skip_sw\
  hw_tc 1

Match Dst IPv4,Dst Port and route to TC1:
  prio 2 flower dst_ip 192.168.3.5/32\
  ip_proto udp dst_port 25 skip_sw\
  hw_tc 2

Match Dst IPv6,Dst Port and route to TC1:
  prio 3 flower dst_ip fe8::200:1\
  ip_proto udp dst_port 66 skip_sw\
  hw_tc 2

Delete tc flower filter:
Example:

Flow Director Sideband is disabled while configuring cloud filters
via tc-flower and until any cloud filter exists.

Unsupported matches when cloud filters are added using enhanced
big buffer cloud filter mode of underlying switch include:
1. source port and source IP
2. Combined MAC address and IP fields.
3. Not specifying L4 port

These filter matches can however be used to redirect traffic to
the main VSI (tc 0) which does not require the enhanced big buffer
cloud filter support.
Signed-off-by: Amritha Nambiar <amritha.nambiar@intel.com>
Signed-off-by: Kiran Patil <kiran.patil@intel.com>
Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com>
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Shannon Nelson <shannon.nelson@oracle.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Introduce the cloud filter data structure and cleanup of cloud
filters associated with the device.
Signed-off-by: Amritha Nambiar <amritha.nambiar@intel.com>
Acked-by: Shannon Nelson <shannon.nelson@oracle.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Add new admin queue definitions and extended fields for cloud
filter support. Define big buffer for extended general fields
in Add/Remove Cloud filters command.
Signed-off-by: Amritha Nambiar <amritha.nambiar@intel.com>
Signed-off-by: Kiran Patil <kiran.patil@intel.com>
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Shannon Nelson <shannon.nelson@oracle.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Add definitions for L4 filters and switch modes based on cloud filters
modes and extend the set switch config command to include the
additional cloud filter mode.
Signed-off-by: Amritha Nambiar <amritha.nambiar@intel.com>
Signed-off-by: Kiran Patil <kiran.patil@intel.com>
Acked-by: Shannon Nelson <shannon.nelson@oracle.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Add mapping of TCs with the seids of the channel VSIs. TC0
will be mapped to the main VSI seid and all other TCs are
mapped to the seid of the corresponding channel VSI.
Signed-off-by: Amritha Nambiar <amritha.nambiar@intel.com>
Acked-by: Shannon Nelson <shannon.nelson@oracle.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

This patch offloads the classid to hardware and uses the classid
reserved in the range :ffe0 - :ffef to identify hardware traffic
classes reported via dev->num_tc.

tcf_result structure contains the class ID of the class to which
the packet belongs and is offloaded to hardware via flower filter.
A new helper function is introduced to represent HW traffic
classes 0 through 15 using the reserved classid values :ffe0 - :ffef.
Signed-off-by: Amritha Nambiar <amritha.nambiar@intel.com>
Acked-by: Shannon Nelson <shannon.nelson@oracle.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

This reverts commit 11f29003.

I am reverting this as I am fairly certain this can result in a memory leak
when combined with the current page recycling scheme. Specifically we end
up attempting to allocate fewer buffers than we recycled and this results
in us rewinding the next to alloc pointer which leads to leaks when we
overwrite the rx_buffer_info when processing the next frame.

Fixes: 11f29003 ("i40e/i40evf: bump tail only in multiples of 8")
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Whether or not there are vectors_left, we only need to redistribute
our vectors if we didn't get as many as we requested.  With the current
check, the code will try to redistribute even if we did in fact get all
the vectors we requested - this can happen when we have more CPUs than
we do vectors.  This restores an earlier check to be sure we only
redistribute if we didn't get the full count we requested.

Fixes: 4ce20abc (i40e: fix MSI-X vector redistribution if hw limit is reached)
Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

A cleanup of the PM code left an incorrect #ifdef in place, leading
to a harmless build warning:

drivers/net/ethernet/intel/i40e/i40e_main.c:12223:12: error: 'i40e_resume' defined but not used [-Werror=unused-function]
drivers/net/ethernet/intel/i40e/i40e_main.c:12185:12: error: 'i40e_suspend' defined but not used [-Werror=unused-function]

It's easier to use __maybe_unused attributes here, since you
can't pick the wrong one.

Fixes: 0e5d3da4 ("i40e: use newer generic PM support instead of legacy PM callbacks")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Acked-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>