- 05 Jul, 2013 13 commits
-
-
Dave Airlie authored
Merge branch 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next This is final pull request for 3.11. This resolves some memory leak issues, and includes some code and dt document file cleanups; just removed unnecessary descriptions. And the patch work for enhancing hdmiphy driver isn't in progress so this patch may go to 3.12. * 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos: drm/exynos: remove duplicated error routine and unnecessary assign drm/exynos: fix pages allocation size in lowlevel_buffer_allocate drm/exynos: use drm_calloc_large when allocates pointer array drm/exynos: add error check routine in exynos_drm_open drm/exynos: initialize the buf_num in vp_video_buffer drm/exynos: remove dead code in vidi_power_on drm/exynos: fix not to remain exynos_gem_obj as a leak of/documentation: Update hpd gpio property for exynos_hdmi
-
Laurent Pinchart authored
The DU requires a 16 pixels pitch alignement. Make sure dumb buffers are allocated with the correct pitch, and validate the pitch when creating frame buffers. Signed-off-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by:
Dave Airlie <airlied@redhat.com>
-
Laurent Pinchart authored
Handle error cases correctly. Signed-off-by:
-
git://people.freedesktop.org/~airlied/linuxDave Airlie authored
Adds 3 features that UMS had to the KMS driver. dynamic resizing - resizing remote-viewer makes guest resize multiple crtcs - remote-viewer can access > 1 crtc. suspend/resume/hibernate: guests can do suspend/resume/hibernate now. * 'qxl-next' of git://people.freedesktop.org/~airlied/linux: qxl: use drm helper hotplug support qxl: add suspend/resume/hibernate support. qxl: add fb and ttm entry points for use by suspend/resume. qxl: add ring prep code for s/r qxl: prepare memslot code for suspend/resume qxl: split monitors_config object creation out. drm/qxl: set time on drawables from userspace drm/qxl: add support for > 1 output drm/qxl: make dynamic resizing work properly.
-
Dave Airlie authored
This uses the helper to deal with hotplug so fbdev gets included. Signed-off-by: -
Dave Airlie authored
This adds suspend/resume and hibernate support for the KMS driver. it evicts all the objects, turns off the outputs, and waits for the hw to go idle, On resume, it resets the memslots, rings, monitors object and forces modeset. Signed-off-by: -
Dave Airlie authored
This just ports some APIs like radeon uses to provide hooks for s/r to call. Signed-off-by: -
Dave Airlie authored
This prepare the ring code for s/r additions, the release ring will need reinitialising. Signed-off-by: -
Dave Airlie authored
this splits out initing the hw memslots from the guest info, and creates an entrypoint for s/r to use. Signed-off-by: -
Dave Airlie authored
This splits the creation of the monitors config object out so we can re-use it across suspend/resume later. Signed-off-by: -
Dave Airlie authored
This just sets the qxl time on the drawables. Signed-off-by: -
Dave Airlie authored
This adds support for a default of 4 heads, with a command line parameter to change the default number. It also overhauls the modesetting code to handle this case properly, and send the correct things to the hardware at the right time. Signed-off-by: -
Dave Airlie authored
qxl has a feature to allow the userspace driver do arbitrary resizes when the viewer resizes, this fixes it by removing unnecessary code from the kernel side. Signed-off-by:
-
- 04 Jul, 2013 17 commits
-
-
Seung-Woo Kim authored
There were duplicated error handling routines during allocating pages in lowlevel_buffer_allocate() and g2d_userptr_get_dma_addr(). Also unnecessary NULL assignments for variable used not any more are removed from g2d_userptr_get_dma_addr() and g2d_userptr_put_dma_addr(). Signed-off-by:
Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by:
YoungJun Cho <yj44.cho@samsung.com> Signed-off-by:
Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by:
Inki Dae <inki.dae@samsung.com>
-
YoungJun Cho authored
When IOMMU is not supported, buf->pages has to be allocated to assign the result of phys_to_page() which return type is struct page *. So it is sufficient to allocate buf->pages with the size of multiple struct page pointers. Signed-off-by:
-
YoungJun Cho authored
If the type of object is pointer array, the drm_calloc_large() is more suitable than kzalloc() for its allocation function. And uses drm_free_large() instead of kfree() also. Signed-off-by:
-
YoungJun Cho authored
When the exynos_drm_subdrv_open() returns error, the file_priv should be released and file->driver_priv set to NULL. Signed-off-by:
-
YoungJun Cho authored
The buf_num in vp_video_buffer() should be 1 or 2, but it is not initialized, and only set to 2 in NV12M or NV12MT cases. So this patch initializes the buf_num with 1 as default. Signed-off-by:
-
YoungJun Cho authored
The type of input parameter enable is bool, so it does not need to check whether true or false. Signed-off-by:
-
YoungJun Cho authored
The exynos_drm_gem_create() only calls drm_gem_object_release() when exynos_drm_alloc_buf() is failed, and exynos_gem_obj remains as a leak, which is allocated in exynos_drm_gem_init(). So this patch fixes it not to remain as a leak. Signed-off-by:
-
Sachin Kamat authored
Signed-off-by:
Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by:
Rahul Sharma <rahul.sharma@samsung.com> Signed-off-by:
-
Daniel Vetter authored
drm/i915 is the only user of the color allocation handling and switched to insert_node a while ago. So we can ditch this. Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
-
Seung-Woo Kim authored
seq of a trace point is unsigned int but print format was %d. So it fixes the format as %u. Signed-off-by:
-
Seung-Woo Kim authored
There are missing parts to handle error in drm_open_helper(). The priv->minor, assigned by idr_find() which can return NULL, should be checked whether it is NULL or not before referencing it. put_pid(), drm_gem_release(), and drm_prime_destory_file_private() should be called when error happens after their pair functions are called. If an error occurs after executing dev->driver->open() which allocates driver specific per-file private data, then the private data should be released. Signed-off-by:
-
Seung-Woo Kim authored
If raw_edid of drm_edid_block_vaild() is null, it will crash, so checking in bad label is removed and instead assertion is added at the top of the function. The type of return for the function is bool, so it fixes to return true and false instead of 1 and 0. Signed-off-by:
-
Shuah Khan authored
Convert drivers/gpu/drm class to use dev_pm_ops for power management and remove Legacy PM ops hooks. With this change, drm class registers suspend/resume callbacks via class->pm (dev_pm_ops) instead of Legacy class->suspend/resume. When __device_suspend() runs call-backs, it will find class->pm ops for the drm class. drm_class_suspend() hook calls driver legacy ops with the state information. e.g: drm_class_suspend() calls into driver suspend routines via drm_dev->driver->suspend(drm_dev, state). Once drm_class_suspend() is converted to dev_pm_ops, it will no longer have access to pm_transition which it has to pass into driver legacy suspend calls. A new freeze and suspend hooks are added to address the not having access to the state information. The new freeze and suspend hooks simply call __drm_class_suspend() with the appropriate pm state information. __drm_class_suspend() is the original suspend hook with a new name. Signed-off-by:
Shuah Khan <shuah.kh@samsung.com> Signed-off-by:
-
Dave Airlie authored
Merge tag 'drm-intel-fixes-2013-07-03' of git://people.freedesktop.org/~danvet/drm-intel into drm-next Pile of fixes for 3.11. A bit large in patch count, but that's simply due to two fixes being split up into really small parts. Also I've included a few more vlv patches than I'd have included for other platforms. But since vlv is officially supported for the first time only in 3.11 that shouldn't result in unbearable risks. Highlights: - ghost eDP fixes for hsw from Paulo - fix PCH detection in virtualized enviroments (Rui Guo) - duct-tape dma sg construction when swiotlb is in use (Konrad), dupe with a patch in your drm-fixes branch - fix sdvo hotplug on i965g - tune down a bunch of dmesg ERRORs which can be hit under normal conditions - detect invalid pitches for tiled scanout buffers (Chris) - a pile of vlv fixes from Ville: rps improvements, fixes for the dpll LPF, fixup the sprite mmio offsets - fix context size on hsw (Ben) - locking fixes for the hotplug code, specifically the storm handling - fix get_config on CPT (Xiong Zhang) - Fix the domain tracking when an unlocked seqno wait was interrupt (Chris), this seems to explain tons of little corruption bugs in the ddx. Chris also added a nice igt to exercise this. - work around stack-corrupting vnsprintf in our error state dumper * tag 'drm-intel-fixes-2013-07-03' of git://people.freedesktop.org/~danvet/drm-intel: (39 commits) drm/i915: Don't try to tear down the stolen drm_mm if it's not there drm/i915: Break up the large vsnprintf() in print_error_buffers() drm/i915: Refactor the wait_rendering completion into a common routine drm/i915: Only clear write-domains after a successful wait-seqno drm/i915: correct intel_dp_get_config() function for DevCPT drm/i915: fix hpd interrupt register locking drm/i915: fold the no-irq check into intel_hpd_irq_handler drm/i915: fold the queue_work into intel_hpd_irq_handler drm/i915: fold the hpd_irq_setup call into intel_hpd_irq_handler drm/i915: s/hotplug_irq_storm_detect/intel_hpd_irq_handler/ drm/i915: close tiny race in the ilk pcu even interrupt setup drm/i915: fix locking around ironlake_enable|disable_display_irq drm/i915: Fix context sizes on HSW drm/i915: Fix VLV sprite register offsets Revert "drm/i915: Don't use the HDMI port color range bit on Valleyview" drm/i915: s/LFP/LPF in DPIO PLL register names drm/i915: Fix VLV PLL LPF coefficients for DAC drm/i915: Jump to at least RPe on VLV when increasing the GPU frequency drm/i915: Don't increase the GPU frequency from the delayed VLV rps timer drm/i915: GEN6_RP_INTERRUPT_LIMITS doesn't seem to exist on VLV ...
-
git://people.freedesktop.org/~agd5f/linuxDave Airlie authored
A few more DPM fixes. * 'drm-next-3.11' of git://people.freedesktop.org/~agd5f/linux: drm/radeon/sumo: implement support for disable_gfx_power_gating_in_uvd flag drm/radeon/tn: disable PG when changing UVD clocks drm/radeon/sumo: disable PG when changing UVD clocks drm/radeon/aruba: disable additional rlc features drm/radeon: fix endian bug in radeon_atom_get_mclk_range_table() drm/radeon/dpm: fix compilation with certain versions of gcc drm/radeon/dpm: clarify debugfs warning
-
Daniel Vetter authored
The usual drm driver has tons of different drm_mm memory managers so the drm error message in dmesg is pretty useless. WARN instead so that we have the full backtrace. Signed-off-by:
Ben Widawsky <ben@bwidawsk.net> Signed-off-by:
-
Daniel Vetter authored
In commit 3a359f0b Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Sat Apr 20 12:08:11 2013 +0200 drm/mm: fix dump table BUG I've failed to fix both instances of the regression introduced in commit 9e8944ab Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Thu Nov 15 11:32:17 2012 +0000 drm: Introduce an iterator over holes in the drm_mm range manager Patch this up in the same way by extracting the hole debug logic into it's own function, since that'll also clarify the logic a bit. Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
-
- 03 Jul, 2013 6 commits
-
-
Daniel Vetter authored
In commit da34242e Author: YoungJun Cho <yj44.cho@samsung.com> Date: Wed Jun 26 10:21:42 2013 +0900 drm/prime: add return check for dma_buf_fd the failure case handling was fixed up. But in the case when we already had the buffer exported it changed the return value: Previously we've return 0 on success, now we return the fd. This ABI change has been caught by i-g-t/prime_self_import/with_one_bo. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=66436 Cc: YoungJun Cho <yj44.cho@samsung.com> Cc: Seung-Woo Kim <sw0312.kim@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Tested-by:
lu hua <huax.lu@intel.com> Signed-off-by:
-
Alex Deucher authored
Some asic revisions need to disable PG when UVD is active. Signed-off-by:Alex Deucher <alexander.deucher@amd.com>
-
Alex Deucher authored
Causes hangs for some people. Signed-off-by: -
Alex Deucher authored
Causes hangs for some people. Signed-off-by: -
Alex Deucher authored
They cause problems with dynamic clocking. Signed-off-by: -
Alex Deucher authored
Signed-off-by:
-
- 02 Jul, 2013 4 commits
-
-
Mike Lothian authored
Add #include <linux/seq_file.h> to *_dpm.c files Signed-off-by: -
Alex Deucher authored
For chips without debugfs dpm support say that it's not implemented rather than not supported to avoid confusion about DPM support in general. Signed-off-by: -
Daniel Vetter authored
Every other place properly checks whether we've managed to set up the stolen allocator at boot-up properly, with the exception of the cleanup code. Which results in an ugly *ERROR* Memory manager not clean. Delaying takedown at module unload time since the drm_mm isn't initialized at all. v2: While at it check whether the stolen drm_mm is initialized instead of the more obscure stolen_base == 0 check. v3: Fix up the logic. Also we need to keep the stolen_base check in i915_gem_object_create_stolen_for_preallocated since that can be called before stolen memory is fully set up. Spotted by Chris Wilson. v4: Readd the conversion in i915_gem_object_create_stolen_for_preallocated, the check is for the dev_priv->mm.gtt_space drm_mm, the stolen allocatot must already be initialized when calling that function (if we indeed have stolen memory). Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=65953 Cc: Chris Wilson <chris@chris-wilson.co.uk> Tested-by: lu hua <huax.lu@intel.com> (v3) Reviewed-by:
-
David Herrmann authored
There is no reason to return "int" as this function never fails. Furthermore, several drivers (ast, sis) already depend on this. Signed-off-by:
David Herrmann <dh.herrmann@gmail.com> Reviewed-by:
-
