This is used as a base board for reference core modules.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Olof Johansson <olof@lixom.net>

Need the aon_pm_l2_intc and irq0_aon_intc descriptions, so included
those as well.
Signed-off-by: Gregory Fong <gregory.0xf0@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Olof Johansson <olof@lixom.net>

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Olof Johansson <olof@lixom.net>

In the default Broadcom SDK the shared override is activated for this
cache controller, do the same in the upstream code. Data and
instruction prefetching is not activated by default for this cache
controller on the bcm53xx SoC, do it manually like it is done in the
vendor SDK.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'sirf-dts-for-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/baohua/linux into next/dt

ARM: sirf: dts update for 4.3

some missed dt nodes or props for sirf dts for 4.3.
Among them:
- G2D
- PWM
- JPEG
- Multimedia
- PMU(performance monitor unit)
- GMAC
- SDR(software digital radio) and its DMA
- pinmux for NAND
- GPIO key

* tag 'sirf-dts-for-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/baohua/linux:
  ARM: dts: atlas7: add a GPIO key for rearview button
  ARM: dts: atlas7: put pinctl property to get pinmux for NAND
  ARM: dts: atlas7: add software digital radio nodes and its DMA channels
  ARM: dts: atlas7: add lost PWM node
  ARM: dts: atlas7: add lost G2D node
  ARM: dts: atlas7: add multimedia codec node
  ARM: dts: atlas7: add alias name for spi device
  ARM: dts: atlas7: add lost gmac node
  ARM: dts: atlas7: add performance monitor unit node
  ARM: dts: atlas7: add lost jpeg node
Signed-off-by: Olof Johansson <olof@lixom.net>

Initial version of DTSI for ProXstream2 and PH1-LD6b and DTS for
PH1-LD6b reference board.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
[olof: sort Makefile entries]
Signed-off-by: Olof Johansson <olof@lixom.net>

Initial version of UniPhier PH1-Pro5 device tree.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Olof Johansson <olof@lixom.net>

Add I2C controller device nodes for PH1-sLD3, PH1-LD4, PH1-sLD8
(FIFO-less I2C) and PH1-Pro4 (FIFO-builtin I2C).
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'samsung-dt-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/dt

Samsung 1st DT updates for v4.3

- for exynos3250
  : update video-phy node with syscon phandle
- for exynos4210
  : add CPU OPP and regulator supply property
  : use labels for overriding nodes for exynos4210-universal_c210
- for exynos4412-trats2
  : set max17047 over heat and voltage thresholds
- for exynos5250 and 5420
  : extend exynos5250/5420-pinctrl nodes using labels
  : include exynos5250/5420-pinctrl after the nodes definitions
- for exynos5410-smdk5410
  : clean up indentation
- for exynos5422-odroidxu3
  : define default thermal-zones for exynos5422
  : enable USB3 regulators, TMU and thermal-zones
  : add pwm-fan node

* tag 'samsung-dt-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
  ARM: dts: Extend exynos5420-pinctrl nodes using labels instead of paths
  ARM: dts: Include exynos5420-pinctrl after the nodes were defined for exynos5420
  ARM: dts: Extend exynos5250-pinctrl nodes using labels instead of paths
  ARM: dts: Include exynos5250-pinctrl after the nodes were defined for exynos5250
  ARM: dts: Enable thermal-zones for exynos5422-odroidxu3
  ARM: dts: Define default thermal-zones for exynos5422
  ARM: dts: Enable TMU for exynos5422-odroidxu3
  ARM: dts: Add pwm-fan node for exynos5422-odroidxu3
  ARM: dts: Use labels for overriding nodes for exynos4210-universal_c210
  ARM: dts: Set max17047 over heat and voltage thresholds for exynos4412-trats2
  ARM: dts: Enable USB3 regulators for exynos5422-odroidxu3
  ARM: dts: Clean up indentation for exynos5410-smdk5410
  ARM: dts: add CPU OPP and regulator supply property for exynos4210
  ARM: dts: Update video-phy node with syscon phandle for exynos3250
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'sunxi-dt-for-4.3' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into next/dt

Allwinner Device Tree changes for 4.3

A bunch of device tree patches that:
  - Enable the OTG controller on some boards
  - Various additions to the existing boards
  - New boards: A33 Ippo Q8H, Iteaduino Plus,

* tag 'sunxi-dt-for-4.3' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux: (35 commits)
  ARM: dts: sun7i: Change cubietruck wifi enable pin to use mmc-pwrseq
  ARM: dts: sun5i: hsg-h702: Enable USB OTG controller
  ARM: dts: sun5i: hsg-h702: Enable side volume buttons with LRADC
  ARM: dts: sun8i: Enable USB DRC on Ippo Q8H-A33 tablet
  ARM: dts: sun5i: Enable USB DRC on A13 OLinuxIno
  ARM: dts: sun5i: Enable USB DRC on A10s OLinuxIno Micro
  ARM: dts: sun4i: Enable USB DRC on A10 OLinuxIno Lime
  ARM: sunxi: dt: Convert users to the PIO interrupts binding
  ARM: dts: sun4i: Add Iteaduino Plus A10
  ARM: dts: A10s-OLinuxIno: Add a node for axp152 pmic
  ARM: dts: axp152: Add a dtsi file for the axp152 pmic
  ARM: dts: sun6i: Enable otg controller on the cs908
  ARM: dts: sun4i: Enable otg controller on the mini-x
  ARM: dts: sun4i: Enable otg controller on the ba10-tvbox
  ARM: dts: sunxi: Add regulator-boot-on to usb host port regulator nodes
  devicetree: Add msi to the vendor-prefix list
  ARM: sun8i: dts: Add Ippo-q8h v1.2 with A33
  ARM: dts: sun8i: sina33: Enable USB hosts
  ARM: dts: sun8i: Enable USB host on GA10H-A33 tablets
  ARM: dts: sun8i: Enable USB DRC on GA10H-A33 tablets
  ...
Signed-off-by: Olof Johansson <olof@lixom.net>

Setup the emc pins used by external memory devices and add
configuration for the devices found on the Hitex eval board.

The Hitex eval board has a NOR Flash attached to chip select 0
and 512 kB of SRAM on chip select 2.
Signed-off-by: Joachim Eastwood <manabian@gmail.com>
Signed-off-by: Olof Johansson <olof@lixom.net>

Enable Ethernet and add pin muxing and set the correct
frequency on the enet tx clock input.
Signed-off-by: Ariel D'Alessandro <ariel@vanguardiasur.com.ar>
Signed-off-by: Joachim Eastwood <manabian@gmail.com>
Signed-off-by: Olof Johansson <olof@lixom.net>

Setup pin muxing and properties for the debug console on uart0.
Signed-off-by: Ariel D'Alessandro <ariel@vanguardiasur.com.ar>
Signed-off-by: Joachim Eastwood <manabian@gmail.com>
Signed-off-by: Olof Johansson <olof@lixom.net>

Hook up LEDs on the outputs from the D-type flip-flop found on
the address/data bus.

Note that the LEDx label in the schematics is reversed in regard
to the bits on the data bus. Hence the reverse ordering used here.
Signed-off-by: Joachim Eastwood <manabian@gmail.com>
Signed-off-by: Olof Johansson <olof@lixom.net>

Setup the emc pins used by external memory devices and add
configuration for the devices found on the EA4357 devkit.

The EA4357 devkit has a NOR Flash attached to chip select 0
and a D-type flip-flop used for LEDs on chip select 2.
Signed-off-by: Joachim Eastwood <manabian@gmail.com>
Signed-off-by: Olof Johansson <olof@lixom.net>

Enable USB0 on the EA4357 devkit and setup the required USB0
control pins.
Signed-off-by: Joachim Eastwood <manabian@gmail.com>
Signed-off-by: Olof Johansson <olof@lixom.net>

All devices in the LPC18xx/43xx familiy contain a ARM PL172
MultiPort Memory Controller (MPMC).
Signed-off-by: Joachim Eastwood <manabian@gmail.com>
Signed-off-by: Olof Johansson <olof@lixom.net>

NXP LPC185x and LPC435x/70 devices contain a ARM PL111 lcd controller.
Signed-off-by: Joachim Eastwood <joachim.eastwood@gmail.com>
Signed-off-by: Olof Johansson <olof@lixom.net>

Add the USB OTG phy under the CREG syscon node and attach it to
the USB0 EHCI controller.
Signed-off-by: Joachim Eastwood <manabian@gmail.com>
Signed-off-by: Olof Johansson <olof@lixom.net>

Touching this key will trigger a camera event for rearview.
Signed-off-by: Andy Sun <Andy.Sun@csr.com>
Signed-off-by: Barry Song <Baohua.Song@csr.com>

Nand controller often share some pins with sd/mmc controller on
atlas and prima series, nand node can be disabled if the pins are
used by sd/mmc controller.
Signed-off-by: Huayi Li <huayi.li@csr.com>
Signed-off-by: Barry Song <Baohua.Song@csr.com>

this patch adds SDR(software digital raio) nodes and the DMA channels
for it.
Signed-off-by: Yonghui Zhang <yonghui.zhang@csr.com>
Signed-off-by: Barry Song <Baohua.Song@csr.com>

this patch adds lost PWM node, and also fixes the ranges of its
parent node.
Signed-off-by: Guo Zeng <guo.zeng@csr.com>
Signed-off-by: Barry Song <Baohua.Song@csr.com>

this patch adds lost G2D node, and also fixes the range of its
parent node.
Signed-off-by: Dongli Li <Kasin.Li@csr.com>
Signed-off-by: Barry Song <Baohua.Song@csr.com>

this patch adds multimedia video codec node, and also fixes the
ranges of its parent node.
Signed-off-by: Xiaofeng Fei <xiaofeng.fei@csr.com>
Signed-off-by: Barry Song <Baohua.Song@csr.com>

spi framework can use alias name of spi device to retrieve the bus id,
so bus id will not be dynamical but statical and it will be easier for
test for a specified spi device with a fixed name like use spidev.
Signed-off-by: Qipan Li <Qipan.Li@csr.com>
Signed-off-by: Barry Song <Baohua.Song@csr.com>

this patch adds lost ethernet gmac node, and also fix the ranges of
its parent node.
Signed-off-by: Ye He <ye.he@csr.com>
Signed-off-by: Barry Song <Baohua.Song@csr.com>

Signed-off-by: Ye He <ye.he@csr.com>
Signed-off-by: Barry Song <Baohua.Song@csr.com>

this patch adds lost jpeg node, and also fix the ranges of its
parent node.
Signed-off-by: Lily.Li <Lily.Li@csr.com>
Signed-off-by: Barry Song <Baohua.Song@csr.com>

mvebu dt changes for v4.3 (part #2)

Add support Buffalo Linkstation LS-WTGL

* tag 'mvebu-dt-4.3-2' of git://git.infradead.org/linux-mvebu:
  ARM: dts: orion5x: add buffalo linkstation ls-wtgl
Signed-off-by: Olof Johansson <olof@lixom.net>

arm: Xilinx Zynq dt patches for v4.3

- Add ECC for Synopsys MC
- Add OCM, pushbuttons to zc702

* tag 'zynq-dt-for-4.3' of https://github.com/Xilinx/linux-xlnx:
  ARM: zynq: DT: Add zc702 pushbuttons to DT as gpio-keys
  ARM: zynq: DT: Add missing interrupt for L2 pl310
  Documentation: devicetree: Add ECC information to synopsys ddr controller
  ARM: dts: zynq: Add OCM node
Signed-off-by: Olof Johansson <olof@lixom.net>

Qualcomm ARM Based Device Tree Updates for v4.3

* Switch to use pinctrl compatible for GPIOs
* Add RPM regulators for MSM8960
* Add SPI Ethernet support on MSM8960 CDP
* Add SMEM support along with dependencies
* Add PM8921 support for GPIO and MPP
* Fix GSBI cell index
* Switch to use real regulators on APQ8064 w/ SDCC

* tag 'qcom-dt-for-4.3' of git://codeaurora.org/quic/kernel/agross-msm:
  ARM: dts: qs600: Add real regulators to sdcc
  ARM: dts: ifc6410: add real regulators for sdcc nodes.
  ARM: dts: apq8064: remove temporary fixed regulator for mmc
  ARM: dts: apq8064: fix missing gsbi cell-index
  ARM: dts: apq8064: Add DT support for GSBI6 and for UART pin mux
  ARM: dts: apq8064: add pm8921 mpp support
  ARM: dts: apq8064: Add pm8921 mfd and its gpio node
  ARM: dts: msm8974: Add smem reservation and node
  ARM: dts: msm8974: Add tcsr mutex node
  ARM: dts: qcom: Add ks8851 node for wired ethernet
  ARM: dts: qcom: Add MSM8960 CDP RPM regulators
  ARM: dts: qcom: Add MSM8960 RPM and RPM regulator nodes
  ARM: dts: qcom: Replace gpio node with pinctrl node
  ARM: dts: qcom: Replace gpio node with pinctrl node
Signed-off-by: Olof Johansson <olof@lixom.net>

First batch of DT changes for 4.3:
- some fixes on sama5d4 ADC definition
- adding Image Sensor Interface (aka ISI) on at91sam9m10g45ek board
- update rst controller compatible string on sama5 machines
- new sama5d2 DT definition and its reference board:
  the sama5d2 Xplained. Minimal configuration for now.

* tag 'at91-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91:
  ARM: at91/dt: add minimal sama5d2 Xplained board
  ARM: at91/dt: add basic dtsi for sama5d2 SoC
  ARM: at91/dt: sama5: update rstc to correct compatible string
  ARM: at91/dt: add isi & ov2640 dt nodes for at91sam9m10g45ek board
  ARM: at91/dt: sama5d4: move ADC pinctrl to board device trees
  ARM: at91/dt: sama5d4: fix external trigger property
Signed-off-by: Olof Johansson <olof@lixom.net>

The wifi-enable pin of the ap6210 module is not really a regulator,
switch to the mmc-pwrseq framework for controlling it. This more
accurately reflects how the hardware actually works.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
[maxime: Changed the name of the pinctrl node and re-ordered it]
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

This tablet has proper USB OTG support, using 3 GPIO pins for
ID and VBUS detection, and also VBUS control.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

The tablet has volume up/down buttons on the side, connected to the LRADC.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

Enable the otg/drc usb controller on the Ippo Q8H-A33 tablet, for now it
is enabled in host-only mode, because true OTG support requires support
for detecting and enabling Vbus through the axp221 pmic.

For this to work the Vbus on the port must be enabled by u-boot,
or a powered hub must be used.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

Enable the otg/drc usb controller on the A13 OLinuxIno.
Signed-off-by: Mark Janssen <mark@sig-io.nl>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

Enable the otg/drc usb controller on the A10s OLinuxIno Micro.

Note the A10s OlinuxIno Micro always has some voltage on its otg power
pin, even if the usb-vbus0-regulator is disabled, the leaked voltage is
enough to make vbus-det always report 1, so we do not use vbus-det on
this board.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

Enable the otg/drc usb controller on the A10 OLinuxIno Lime.
Signed-off-by: Remy van Elst <relst@relst.nl>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>