Skip to content

L
linux
Switch branch/tag
  1. 05 May, 2015 4 commits
  3. 01 May, 2015 5 commits
    • Ben Hutchings's avatar
      tcp: Fix crash in TCP Fast Open · 7d157c2e
      Ben Hutchings authored 
      Commit 355a901e ("tcp: make connect() mem charging friendly")
changed tcp_send_syn_data() to perform an open-coded copy of the 'syn'
skb rather than using skb_copy_expand().

The open-coded copy does not cover the skb_shared_info::gso_segs
field, so in the new skb it is left set to 0.  When this commit was
backported into stable branches between 3.10.y and 3.16.7-ckty
inclusive, it triggered the BUG() in tcp_transmit_skb().

Since Linux 3.18 the GSO segment count is kept in the
tcp_skb_cb::tcp_gso_segs field and tcp_send_syn_data() does copy the
tcp_skb_cb structure to the new skb, so mainline and newer stable
branches are not affected.

Set skb_shared_info::gso_segs to the correct value of 1.
Signed-off-by: default avatarBen Hutchings <ben@decadent.org.uk>
Acked-by: default avatarEric Dumazet <edumazet@google.com>
[ kamal: pre-3.18-stable only; no upstream commit ]
Signed-off-by: default avatarKamal Mostafa <kamal@canonical.com>
      7d157c2e
    • Jann Horn's avatar
      fs: take i_mutex during prepare_binprm for set[ug]id executables · ee212ab1
      Jann Horn authored 
      commit 8b01fc86 upstream.

This prevents a race between chown() and execve(), where chowning a
setuid-user binary to root would momentarily make the binary setuid
root.

This patch was mostly written by Linus Torvalds.
Signed-off-by: default avatarJann Horn <jann@thejh.net>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
[ luis: backported to 3.16:
  - relaced task_no_new_privs() by current->no_new_privs
  - replaced READ_ONCE() by ACCESS_ONCE() ]
Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
Signed-off-by: default avatarKamal Mostafa <kamal@canonical.com>
      ee212ab1
    • Nadav Amit's avatar
      KVM: x86: Fix lost interrupt on irr_pending race · 078be168
      Nadav Amit authored 
      commit f210f757 upstream.

apic_find_highest_irr assumes irr_pending is set if any vector in APIC_IRR is
set.  If this assumption is broken and apicv is disabled, the injection of
interrupts may be deferred until another interrupt is delivered to the guest.
Ultimately, if no other interrupt should be injected to that vCPU, the pending
interrupt may be lost.

commit 56cc2406 ("KVM: nVMX: fix "acknowledge interrupt on exit" when APICv
is in use") changed the behavior of apic_clear_irr so irr_pending is cleared
after setting APIC_IRR vector. After this commit, if apic_set_irr and
apic_clear_irr run simultaneously, a race may occur, resulting in APIC_IRR
vector set, and irr_pending cleared. In the following example, assume a single
vector is set in IRR prior to calling apic_clear_irr:

apic_set_irr				apic_clear_irr
------------				--------------
apic->irr_pending = true;
					apic_clear_vector(...);
					vec = apic_search_irr(apic);
					// => vec == -1
apic_set_vector(...);
					apic->irr_pending = (vec != -1);
					// => apic->irr_pending == false

Nonetheless, it appears the race might even occur prior to this commit:

apic_set_irr				apic_clear_irr
------------				--------------
apic->irr_pending = true;
					apic->irr_pending = false;
					apic_clear_vector(...);
					if (apic_search_irr(apic) != -1)
						apic->irr_pending = true;
					// => apic->irr_pending == false
apic_set_vector(...);

Fixing this issue by:
1. Restoring the previous behavior of apic_clear_irr: clear irr_pending, call
   apic_clear_vector, and then if APIC_IRR is non-zero, set irr_pending.
2. On apic_set_irr: first call apic_set_vector, then set irr_pending.
Signed-off-by: default avatarNadav Amit <namit@cs.technion.ac.il>
Signed-off-by: default avatarPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: default avatarKamal Mostafa <kamal@canonical.com>
      078be168
    • Peter Hurley's avatar
      n_tty: Fix read buffer overwrite when no newline · 1c11b289
      Peter Hurley authored 
      commit fb5ef9e7 upstream.

BugLink: http://bugs.launchpad.net/bugs/1381005

In canon mode, the read buffer head will advance over the buffer tail
if the input > 4095 bytes without receiving a line termination char.

Discard additional input until a line termination is received.
Before evaluating for overflow, the 'room' value is normalized for
I_PARMRK and 1 byte is reserved for line termination (even in !icanon
mode, in case the mode is switched). The following table shows the
transform:

 actual buffer |  'room' value before overflow calc
  space avail  |    !I_PARMRK    |    I_PARMRK
 --------------------------------------------------
      0        |       -1        |       -1
      1        |        0        |        0
      2        |        1        |        0
      3        |        2        |        0
      4+       |        3        |        1

When !icanon or when icanon and the read buffer contains newlines,
normalized 'room' values of -1 and 0 are clamped to 0, and
'overflow' is 0, so read_head is not adjusted and the input i/o loop
exits (setting no_room if called from flush_to_ldisc()). No input
is discarded since the reader does have input available to read
which ensures forward progress.

When icanon and the read buffer does not contain newlines and the
normalized 'room' value is 0, then overflow and room are reset to 1,
so that the i/o loop will process the next input char normally
(except for parity errors which are ignored). Thus, erasures, signalling
chars, 7-bit mode, etc. will continue to be handled properly.

If the input char processed was not a line termination char, then
the canon_head index will not have advanced, so the normalized 'room'
value will now be -1 and 'overflow' will be set, which indicates the
read_head can safely be reset, effectively erasing the last char
processed.

If the input char processed was a line termination, then the
canon_head index will have advanced, so 'overflow' is cleared to 0,
the read_head is not reset, and 'room' is cleared to 0, which exits
the i/o loop (because the reader now have input available to read
which ensures forward progress).

Note that it is possible for a line termination to be received, and
for the reader to copy the line to the user buffer before the
input i/o loop is ready to process the next input char. This is
why the i/o loop recomputes the room/overflow state with every
input char while handling overflow.

Finally, if the input data was processed without receiving
a line termination (so that overflow is still set), the pty
driver must receive a write wakeup. A pty writer may be waiting
to write more data in n_tty_write() but without unthrottling
here that wakeup will not arrive, and forward progress will halt.
(Normally, the pty writer is woken when the reader reads data out
of the buffer and more space become available).
Signed-off-by: default avatarPeter Hurley <peter@hurleysoftware.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
(backported from commit fb5ef9e7)
Signed-off-by: default avatarJoseph Salisbury <joseph.salisbury@canonical.com>
Signed-off-by: default avatarKamal Mostafa <kamal@canonical.com>
      1c11b289
    • Peter Hurley's avatar
      n_tty: Merge .receive_buf() flavors · 9c4da38d
      Peter Hurley authored 
      commit 5c32d123 upstream.

N_TTY's direct and flow-controlled flavors of the .receive_buf()
method are nearly identical; fold together.
Signed-off-by: default avatarPeter Hurley <peter@hurleysoftware.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
[ kamal: 3.13-stable prereq for
  fb5ef9e7 n_tty: Fix read buffer overwrite when no newline ]
Cc: Joseph Salisbury <joseph.salisbury@canonical.com>
Signed-off-by: default avatarKamal Mostafa <kamal@canonical.com>
      9c4da38d
  5. 10 Apr, 2015 18 commits
  7. 08 Apr, 2015 2 commits
  9. 07 Apr, 2015 11 commits
    • Eric Dumazet's avatar
      tcp: make connect() mem charging friendly · de023863
      Eric Dumazet authored 
      [ Upstream commit 355a901e ]

While working on sk_forward_alloc problems reported by Denys
Fedoryshchenko, we found that tcp connect() (and fastopen) do not call
sk_wmem_schedule() for SYN packet (and/or SYN/DATA packet), so
sk_forward_alloc is negative while connect is in progress.

We can fix this by calling regular sk_stream_alloc_skb() both for the
SYN packet (in tcp_connect()) and the syn_data packet in
tcp_send_syn_data()

Then, tcp_send_syn_data() can avoid copying syn_data as we simply
can manipulate syn_data->cb[] to remove SYN flag (and increment seq)

Instead of open coding memcpy_fromiovecend(), simply use this helper.

This leaves in socket write queue clean fast clone skbs.

This was tested against our fastopen packetdrill tests.
Reported-by: default avatarDenys Fedoryshchenko <nuclearcat@nuclearcat.com>
Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
Acked-by: default avatarYuchung Cheng <ycheng@google.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
Signed-off-by: default avatarKamal Mostafa <kamal@canonical.com>
      de023863
    • Catalin Marinas's avatar
      net: compat: Update get_compat_msghdr() to match copy_msghdr_from_user() behaviour · 415bcb7d
      Catalin Marinas authored 
      [ Upstream commit 91edd096 ]

Commit db31c55a (net: clamp ->msg_namelen instead of returning an
error) introduced the clamping of msg_namelen when the unsigned value
was larger than sizeof(struct sockaddr_storage). This caused a
msg_namelen of -1 to be valid. The native code was subsequently fixed by
commit dbb490b9 (net: socket: error on a negative msg_namelen).

In addition, the native code sets msg_namelen to 0 when msg_name is
NULL. This was done in commit (6a2a2b3a net:socket: set msg_namelen
to 0 if msg_name is passed as NULL in msghdr struct from userland) and
subsequently updated by 08adb7da (fold verify_iovec() into
copy_msghdr_from_user()).

This patch brings the get_compat_msghdr() in line with
copy_msghdr_from_user().

Fixes: db31c55a (net: clamp ->msg_namelen instead of returning an error)
Cc: David S. Miller <davem@davemloft.net>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: default avatarCatalin Marinas <catalin.marinas@arm.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
Signed-off-by: default avatarKamal Mostafa <kamal@canonical.com>
      415bcb7d
    • Josh Hunt's avatar
      tcp: fix tcp fin memory accounting · 55aed8eb
      Josh Hunt authored 
      [ Upstream commit d22e1537 ]

tcp_send_fin() does not account for the memory it allocates properly, so
sk_forward_alloc can be negative in cases where we've sent a FIN:

ss example output (ss -amn | grep -B1 f4294):
tcp    FIN-WAIT-1 0      1            192.168.0.1:45520         192.0.2.1:8080
	skmem:(r0,rb87380,t0,tb87380,f4294966016,w1280,o0,bl0)
Acked-by: default avatarEric Dumazet <edumazet@google.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
Signed-off-by: default avatarKamal Mostafa <kamal@canonical.com>
      55aed8eb
    • Steven Barth's avatar
      ipv6: fix backtracking for throw routes · 34e2eda5
      Steven Barth authored 
      [ Upstream commit 73ba57bf ]

for throw routes to trigger evaluation of other policy rules
EAGAIN needs to be propagated up to fib_rules_lookup
similar to how its done for IPv4

A simple testcase for verification is:

ip -6 rule add lookup 33333 priority 33333
ip -6 route add throw 2001:db8::1
ip -6 route add 2001:db8::1 via fe80::1 dev wlan0 table 33333
ip route get 2001:db8::1
Signed-off-by: default avatarSteven Barth <cyrus@openwrt.org>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
Signed-off-by: default avatarKamal Mostafa <kamal@canonical.com>
      34e2eda5
    • Ondrej Zary's avatar
      Revert "net: cx82310_eth: use common match macro" · 10ebfda3
      Ondrej Zary authored 
      [ Upstream commit 8d006e01 ]

This reverts commit 11ad714b because
it breaks cx82310_eth.

The custom USB_DEVICE_CLASS macro matches
bDeviceClass, bDeviceSubClass and bDeviceProtocol
but the common USB_DEVICE_AND_INTERFACE_INFO matches
bInterfaceClass, bInterfaceSubClass and bInterfaceProtocol instead, which are
not specified.
Signed-off-by: default avatarOndrej Zary <linux@rainbow-software.org>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
Signed-off-by: default avatarKamal Mostafa <kamal@canonical.com>
      10ebfda3
    • Al Viro's avatar
      rxrpc: bogus MSG_PEEK test in rxrpc_recvmsg() · b7cd1f4a
      Al Viro authored 
      [ Upstream commit 7d985ed1 ]

[I would really like an ACK on that one from dhowells; it appears to be
quite straightforward, but...]

MSG_PEEK isn't passed to ->recvmsg() via msg->msg_flags; as the matter of
fact, neither the kernel users of rxrpc, nor the syscalls ever set that bit
in there.  It gets passed via flags; in fact, another such check in the same
function is done correctly - as flags & MSG_PEEK.

It had been that way (effectively disabled) for 8 years, though, so the patch
needs beating up - that case had never been tested.  If it is correct, it's
-stable fodder.
Signed-off-by: default avatarAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
Signed-off-by: default avatarKamal Mostafa <kamal@canonical.com>
      b7cd1f4a
    • Al Viro's avatar
      caif: fix MSG_OOB test in caif_seqpkt_recvmsg() · 437b277d
      Al Viro authored 
      [ Upstream commit 3eeff778 ]

It should be checking flags, not msg->msg_flags.  It's ->sendmsg()
instances that need to look for that in ->msg_flags, ->recvmsg() ones
(including the other ->recvmsg() instance in that file, as well as
unix_dgram_recvmsg() this one claims to be imitating) check in flags.
Braino had been introduced in commit dcda13 ("caif: Bugfix - use MSG_TRUNC
in receive") back in 2010, so it goes quite a while back.
Signed-off-by: default avatarAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
Signed-off-by: default avatarKamal Mostafa <kamal@canonical.com>
      437b277d
    • Eric Dumazet's avatar
      inet_diag: fix possible overflow in inet_diag_dump_one_icsk() · bb4d37c8
      Eric Dumazet authored 
      [ Upstream commit c8e2c80d ]

inet_diag_dump_one_icsk() allocates too small skb.

Add inet_sk_attr_size() helper right before inet_sk_diag_fill()
so that it can be updated if/when new attributes are added.

iproute2/ss currently does not use this dump_one() interface,
this might explain nobody noticed this problem yet.
Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
Signed-off-by: default avatarKamal Mostafa <kamal@canonical.com>
      bb4d37c8
    • Arnd Bergmann's avatar
      rds: avoid potential stack overflow · 744ff700
      Arnd Bergmann authored 
      [ Upstream commit f862e07c ]

The rds_iw_update_cm_id function stores a large 'struct rds_sock' object
on the stack in order to pass a pair of addresses. This happens to just
fit withint the 1024 byte stack size warning limit on x86, but just
exceed that limit on ARM, which gives us this warning:

net/rds/iw_rdma.c:200:1: warning: the frame size of 1056 bytes is larger than 1024 bytes [-Wframe-larger-than=]

As the use of this large variable is basically bogus, we can rearrange
the code to not do that. Instead of passing an rds socket into
rds_iw_get_device, we now just pass the two addresses that we have
available in rds_iw_update_cm_id, and we change rds_iw_get_mr accordingly,
to create two address structures on the stack there.
Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
Acked-by: default avatarSowmini Varadhan <sowmini.varadhan@oracle.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
Signed-off-by: default avatarKamal Mostafa <kamal@canonical.com>
      744ff700
    • Alexey Kodanev's avatar
      net: sysctl_net_core: check SNDBUF and RCVBUF for min length · dc53c0e3
      Alexey Kodanev authored 
      [ Upstream commit b1cb59cf ]

sysctl has sysctl.net.core.rmem_*/wmem_* parameters which can be
set to incorrect values. Given that 'struct sk_buff' allocates from
rcvbuf, incorrectly set buffer length could result to memory
allocation failures. For example, set them as follows:

    # sysctl net.core.rmem_default=64
      net.core.wmem_default = 64
    # sysctl net.core.wmem_default=64
      net.core.wmem_default = 64
    # ping localhost -s 1024 -i 0 > /dev/null

This could result to the following failure:

skbuff: skb_over_panic: text:ffffffff81628db4 len:-32 put:-32
head:ffff88003a1cc200 data:ffff88003a1cc200 tail:0xffffffe0 end:0xc0 dev:<NULL>
kernel BUG at net/core/skbuff.c:102!
invalid opcode: 0000 [#1] SMP
...
task: ffff88003b7f5550 ti: ffff88003ae88000 task.ti: ffff88003ae88000
RIP: 0010:[<ffffffff8155fbd1>]  [<ffffffff8155fbd1>] skb_put+0xa1/0xb0
RSP: 0018:ffff88003ae8bc68  EFLAGS: 00010296
RAX: 000000000000008d RBX: 00000000ffffffe0 RCX: 0000000000000000
RDX: ffff88003fdcf598 RSI: ffff88003fdcd9c8 RDI: ffff88003fdcd9c8
RBP: ffff88003ae8bc88 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000001 R11: 00000000000002b2 R12: 0000000000000000
R13: 0000000000000000 R14: ffff88003d3f7300 R15: ffff88000012a900
FS:  00007fa0e2b4a840(0000) GS:ffff88003fc00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000d0f7e0 CR3: 000000003b8fb000 CR4: 00000000000006f0
Stack:
 ffff88003a1cc200 00000000ffffffe0 00000000000000c0 ffffffff818cab1d
 ffff88003ae8bd68 ffffffff81628db4 ffff88003ae8bd48 ffff88003b7f5550
 ffff880031a09408 ffff88003b7f5550 ffff88000012aa48 ffff88000012ab00
Call Trace:
 [<ffffffff81628db4>] unix_stream_sendmsg+0x2c4/0x470
 [<ffffffff81556f56>] sock_write_iter+0x146/0x160
 [<ffffffff811d9612>] new_sync_write+0x92/0xd0
 [<ffffffff811d9cd6>] vfs_write+0xd6/0x180
 [<ffffffff811da499>] SyS_write+0x59/0xd0
 [<ffffffff81651532>] system_call_fastpath+0x12/0x17
Code: 00 00 48 89 44 24 10 8b 87 c8 00 00 00 48 89 44 24 08 48 8b 87 d8 00
      00 00 48 c7 c7 30 db 91 81 48 89 04 24 31 c0 e8 4f a8 0e 00 <0f> 0b
      eb fe 66 66 2e 0f 1f 84 00 00 00 00 00 55 48 89 e5 48 83
RIP  [<ffffffff8155fbd1>] skb_put+0xa1/0xb0
RSP <ffff88003ae8bc68>
Kernel panic - not syncing: Fatal exception

Moreover, the possible minimum is 1, so we can get another kernel panic:
...
BUG: unable to handle kernel paging request at ffff88013caee5c0
IP: [<ffffffff815604cf>] __alloc_skb+0x12f/0x1f0
...
Signed-off-by: default avatarAlexey Kodanev <alexey.kodanev@oracle.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
Signed-off-by: default avatarKamal Mostafa <kamal@canonical.com>
      dc53c0e3
    • David S. Miller's avatar
      sparc64: Fix several bugs in memmove(). · 674d61d7
      David S. Miller authored 
      [ Upstream commit 2077cef4 ]

Firstly, handle zero length calls properly.  Believe it or not there
are a few of these happening during early boot.

Next, we can't just drop to a memcpy() call in the forward copy case
where dst <= src.  The reason is that the cache initializing stores
used in the Niagara memcpy() implementations can end up clearing out
cache lines before we've sourced their original contents completely.

For example, considering NG4memcpy, the main unrolled loop begins like
this:

     load   src + 0x00
     load   src + 0x08
     load   src + 0x10
     load   src + 0x18
     load   src + 0x20
     store  dst + 0x00

Assume dst is 64 byte aligned and let's say that dst is src - 8 for
this memcpy() call.  That store at the end there is the one to the
first line in the cache line, thus clearing the whole line, which thus
clobbers "src + 0x28" before it even gets loaded.

To avoid this, just fall through to a simple copy only mildly
optimized for the case where src and dst are 8 byte aligned and the
length is a multiple of 8 as well.  We could get fancy and call
GENmemcpy() but this is good enough for how this thing is actually
used.
Reported-by: default avatarDavid Ahern <david.ahern@oracle.com>
Reported-by: default avatarBob Picco <bpicco@meloft.net>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
Signed-off-by: default avatarKamal Mostafa <kamal@canonical.com>
      674d61d7
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7