- 11 Jan, 2012 40 commits
-
-
Pavel Emelyanov authored
This one behaves similarly to the /proc/<pid>/fd/ one - it contains symlinks one for each mapping with file, the name of a symlink is "vma->vm_start-vma->vm_end", the target is the file. Opening a symlink results in a file that point exactly to the same inode as them vma's one. For example the ls -l of some arbitrary /proc/<pid>/map_files/ | lr-x------ 1 root root 64 Aug 26 06:40 7f8f80403000-7f8f80404000 -> /lib64/libc-2.5.so | lr-x------ 1 root root 64 Aug 26 06:40 7f8f8061e000-7f8f80620000 -> /lib64/libselinux.so.1 | lr-x------ 1 root root 64 Aug 26 06:40 7f8f80826000-7f8f80827000 -> /lib64/libacl.so.1.1.0 | lr-x------ 1 root root 64 Aug 26 06:40 7f8f80a2f000-7f8f80a30000 -> /lib64/librt-2.5.so | lr-x------ 1 root root 64 Aug 26 06:40 7f8f80a30000-7f8f80a4c000 -> /lib64/ld-2.5.so This *helps* checkpointing process in three ways: 1. When dumping a task mappings we do know exact file that is mapped by particular region. We do this by opening /proc/$pid/map_files/$address symlink the way we do with file descriptors. 2. This also helps in determining which anonymous shared mappings are shared with each other by comparing the inodes of them. 3. When restoring a set of processes in case two of them has a mapping shared, we map the memory by the 1st one and then open its /proc/$pid/map_files/$address file and map it by the 2nd task. Using /proc/$pid/maps for this is quite inconvenient since it brings repeatable re-reading and reparsing for this text file which slows down restore procedure significantly. Also as being pointed in (3) it is a way easier to use top level shared mapping in children as /proc/$pid/map_files/$address when needed. [akpm@linux-foundation.org: coding-style fixes] [gorcunov@openvz.org: make map_files depend on CHECKPOINT_RESTORE] Signed-off-by:
Pavel Emelyanov <xemul@parallels.com> Signed-off-by:
Cyrill Gorcunov <gorcunov@openvz.org> Reviewed-by:
Vasiliy Kulikov <segoon@openwall.com> Reviewed-by:
"Kirill A. Shutemov" <kirill@shutemov.name> Cc: Tejun Heo <tj@kernel.org> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: Pavel Machek <pavel@ucw.cz> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Cyrill Gorcunov authored
Prepare the ground for the next "map_files" patch which needs a name of a link file to analyse. Signed-off-by:
-
Matt Fleming authored
Abstract the code sequence for adding a signal handler's sa_mask to current->blocked because the sequence is identical for all architectures. Furthermore, in the past some architectures actually got this code wrong, so introduce a wrapper that all architectures can use. Signed-off-by:
Matt Fleming <matt.fleming@intel.com> Signed-off-by:
Oleg Nesterov <oleg@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Tejun Heo <tj@kernel.org> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by:
-
Matt Fleming authored
Unlike other architectures, sparc currently has no SA_NODEFER definition but only the older SA_NOMASK. Since SA_NOMASK is the historical name for SA_NODEFER, add SA_NODEFER and copy what other architectures do by making SA_NOMASK a synonym for SA_NODEFER. Signed-off-by:
-
Frederic Weisbecker authored
Nothing requires that we lock the filesystem until the root inode is provided. Also iget5_locked() triggers a warning because we are holding the filesystem lock while allocating the inode, which result in a lockdep suspicion that we have a lock inversion against the reclaim path: [ 1986.896979] ================================= [ 1986.896990] [ INFO: inconsistent lock state ] [ 1986.896997] 3.1.1-main #8 [ 1986.897001] --------------------------------- [ 1986.897007] inconsistent {RECLAIM_FS-ON-W} -> {IN-RECLAIM_FS-W} usage. [ 1986.897016] kswapd0/16 [HC0[0]:SC0[0]:HE1:SE1] takes: [ 1986.897023] (&REISERFS_SB(s)->lock){+.+.?.}, at: [<c01f8bd4>] reiserfs_write_lock+0x20/0x2a [ 1986.897044] {RECLAIM_FS-ON-W} state was registered at: [ 1986.897050] [<c014a5b9>] mark_held_locks+0xae/0xd0 [ 1986.897060] [<c014aab3>] lockdep_trace_alloc+0x7d/0x91 [ 1986.897068] [<c0190ee0>] kmem_cache_alloc+0x1a/0x93 [ 1986.897078] [<c01e7728>] reiserfs_alloc_inode+0x13/0x3d [ 1986.897088] [<c01a5b06>] alloc_inode+0x14/0x5f [ 1986.897097] [<c01a5cb9>] iget5_locked+0x62/0x13a [ 1986.897106] [<c01e99e0>] reiserfs_fill_super+0x410/0x8b9 [ 1986.897114] [<c01953da>] mount_bdev+0x10b/0x159 [ 1986.897123] [<c01e764d>] get_super_block+0x10/0x12 [ 1986.897131] [<c0195b38>] mount_fs+0x59/0x12d [ 1986.897138] [<c01a80d1>] vfs_kern_mount+0x45/0x7a [ 1986.897147] [<c01a83e3>] do_kern_mount+0x2f/0xb0 [ 1986.897155] [<c01a987a>] do_mount+0x5c2/0x612 [ 1986.897163] [<c01a9a72>] sys_mount+0x61/0x8f [ 1986.897170] [<c044060c>] sysenter_do_call+0x12/0x32 [ 1986.897181] irq event stamp: 7509691 [ 1986.897186] hardirqs last enabled at (7509691): [<c0190f34>] kmem_cache_alloc+0x6e/0x93 [ 1986.897197] hardirqs last disabled at (7509690): [<c0190eea>] kmem_cache_alloc+0x24/0x93 [ 1986.897209] softirqs last enabled at (7508896): [<c01294bd>] __do_softirq+0xee/0xfd [ 1986.897222] softirqs last disabled at (7508859): [<c01030ed>] do_softirq+0x50/0x9d [ 1986.897234] [ 1986.897235] other info that might help us debug this: [ 1986.897242] Possible unsafe locking scenario: [ 1986.897244] [ 1986.897250] CPU0 [ 1986.897254] ---- [ 1986.897257] lock(&REISERFS_SB(s)->lock); [ 1986.897265] <Interrupt> [ 1986.897269] lock(&REISERFS_SB(s)->lock); [ 1986.897276] [ 1986.897277] *** DEADLOCK *** [ 1986.897278] [ 1986.897286] no locks held by kswapd0/16. [ 1986.897291] [ 1986.897292] stack backtrace: [ 1986.897299] Pid: 16, comm: kswapd0 Not tainted 3.1.1-main #8 [ 1986.897306] Call Trace: [ 1986.897314] [<c0439e76>] ? printk+0xf/0x11 [ 1986.897324] [<c01482d1>] print_usage_bug+0x20e/0x21a [ 1986.897332] [<c01479b8>] ? print_irq_inversion_bug+0x172/0x172 [ 1986.897341] [<c014855c>] mark_lock+0x27f/0x483 [ 1986.897349] [<c0148d88>] __lock_acquire+0x628/0x1472 [ 1986.897358] [<c0149fae>] lock_acquire+0x47/0x5e [ 1986.897366] [<c01f8bd4>] ? reiserfs_write_lock+0x20/0x2a [ 1986.897384] [<c01f8bd4>] ? reiserfs_write_lock+0x20/0x2a [ 1986.897397] [<c043b5ef>] mutex_lock_nested+0x35/0x26f [ 1986.897409] [<c01f8bd4>] ? reiserfs_write_lock+0x20/0x2a [ 1986.897421] [<c01f8bd4>] reiserfs_write_lock+0x20/0x2a [ 1986.897433] [<c01e2edd>] map_block_for_writepage+0xc9/0x590 [ 1986.897448] [<c01b1706>] ? create_empty_buffers+0x33/0x8f [ 1986.897461] [<c0121124>] ? get_parent_ip+0xb/0x31 [ 1986.897472] [<c043ef7f>] ? sub_preempt_count+0x81/0x8e [ 1986.897485] [<c043cae0>] ? _raw_spin_unlock+0x27/0x3d [ 1986.897496] [<c0121124>] ? get_parent_ip+0xb/0x31 [ 1986.897508] [<c01e355d>] reiserfs_writepage+0x1b9/0x3e7 [ 1986.897521] [<c0173b40>] ? clear_page_dirty_for_io+0xcb/0xde [ 1986.897533] [<c014a6e3>] ? trace_hardirqs_on_caller+0x108/0x138 [ 1986.897546] [<c014a71e>] ? trace_hardirqs_on+0xb/0xd [ 1986.897559] [<c0177b38>] shrink_page_list+0x34f/0x5e2 [ 1986.897572] [<c01780a7>] shrink_inactive_list+0x172/0x22c [ 1986.897585] [<c0178464>] shrink_zone+0x303/0x3b1 [ 1986.897597] [<c043cae0>] ? _raw_spin_unlock+0x27/0x3d [ 1986.897611] [<c01788c9>] kswapd+0x3b7/0x5f2 The deadlock shouldn't happen since we are doing that allocation in the mount path, the filesystem is not available for any reclaim. Still the warning is annoying. To solve this, acquire the lock later only where we need it, right before calling reiserfs_read_locked_inode() that wants to lock to walk the tree. Reported-by:Knut Petersen <Knut_Petersen@t-online.de> Signed-off-by:
Frederic Weisbecker <fweisbec@gmail.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christoph Hellwig <hch@lst.de> Cc: Jeff Mahoney <jeffm@suse.com> Cc: Jan Kara <jack@suse.cz> Signed-off-by:
-
Frederic Weisbecker authored
journal_init() doesn't need the lock since no operation on the filesystem is involved there. journal_read() and get_list_bitmap() have yet to be reviewed carefully though before removing the lock there. Just keep the it around these two calls for safety. Signed-off-by:
-
Frederic Weisbecker authored
In the mount path, transactions that are made before journal initialization don't involve the filesystem. We can delay the reiserfs lock until we play with the journal. Signed-off-by:
-
Davidlohr Bueso authored
Signed-off-by:
Davidlohr Bueso <dave@gnu.org> Cc: Jan Kara <jack@suse.cz> Signed-off-by:
-
Ben Hutchings authored
Commit f44f7f96 ("RTC: Initialize kernel state from RTC") introduced a potential infinite loop. If an alarm time contains a wildcard month and an invalid day (> 31), or a wildcard year and an invalid month (>= 12), the loop searching for the next matching date will never terminate. Treat the invalid values as wildcards. Fixes <http://bugs.debian.org/646429>, <http://bugs.debian.org/653331> Reported-by:
leo weppelman <leoweppelman@googlemail.com> Reported-by:
"P. van Gaans" <mailme667@yahoo.co.uk> Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
Jonathan Nieder <jrnieder@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Marcelo Roberto Jimenez <mroberto@cpti.cetuc.puc-rio.br> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: John Stultz <john.stultz@linaro.org> Acked-by:
Alessandro Zummo <a.zummo@towertech.it> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Benoit Cousson authored
Add the DT support for the TI rtc-twl present in the twl4030 and twl6030 devices. Signed-off-by:
Benoit Cousson <b-cousson@ti.com> Acked-by:
-
Lars-Peter Clausen authored
In ancient times it was necessary to manually initialize the bus field of an spi_driver to spi_bus_type. These days this is done in spi_driver_register(), so we can drop the manual assignment. The patch was generated using the following coccinelle semantic patch: // <smpl> @@ identifier _driver; @@ struct spi_driver _driver = { .driver = { - .bus = &spi_bus_type, }, }; // </smpl> Signed-off-by:Lars-Peter Clausen <lars@metafoo.de> Cc: John Stultz <john.stultz@linaro.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by:
-
Axel Lin authored
Signed-off-by:
Axel Lin <axel.lin@gmail.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by:
-
Axel Lin authored
Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Alessandro Zummo <a.zummo@towertech.it> Acked-by:
Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by:
-
Axel Lin authored
This patch converts the drivers in drivers/rtc/* to use the module_platform_driver() macro which makes the code smaller and a bit simpler. Signed-off-by:
Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by:
Mike Frysinger <vapier@gentoo.org> Acked-by:
Guan Xuetao <gxt@mprc.pku.edu.cn> Acked-by:
Linus Walleij <linus.walleij@linaro.org> Acked-by:
Haojian Zhuang <haojian.zhuang@gmail.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Ben Dooks <ben@simtec.co.uk> Cc: John Stultz <john.stultz@linaro.org> Acked-by:
-
Mark Brown authored
Marginally less code and eliminate the possibility of memory leaks. Signed-off-by:
-
Mark Brown authored
Due to changes in the RTC core the period interrupt is now unused so delete the code managing it. Signed-off-by:
-
Mark Godfrey authored
The rtc_calibration attribute allows user-space to get and set the AB8500's RtcCalibration register. The AB8500 will then use the value in this register to compensate for RTC drift every 60 seconds. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by:
Mark Godfrey <mark.godfrey@stericsson.com> Signed-off-by:
Linus Walleij <linus.walleij@stericsson.com> Acked-by:
-
Linus Walleij authored
The resolution of msleep is related to HZ, so with HZ set to 100 any msleep of less than 10ms will become ~10ms. This is not what we want. Use the hrtimer-based usleep_range() and allow for some slack in the non-critical path so we have more control of what is happening here. Signed-off-by:
-
Andrew Lynn authored
Set can_wake flag so wakealarm property is visible in sysfs. Signed-off-by:
Andrew Lynn <andrew.lynn@stericsson.com> Reviewed-by:
Jonas ABERG <jonas.aberg@stericsson.com> Signed-off-by:
-
Robert Marklund authored
We want this driver to be able to wake up the system. Signed-off-by:
Robert Marklund <robert.marklund@stericsson.com> Signed-off-by:
-
Yauhen Kharuzhy authored
Fix alarm IRQ handling, make the alarm one-shot. Cleanup black magick with a validation of already validated time data. Add ability to wake the system with alarm. [akpm@linux-foundation.org: fix CONFIG_PM=n build] Signed-off-by:
Yauhen Kharuzhy <jekhor@gmail.com> Cc: Daniel Mack <daniel@caiaq.de> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by:
-
Yauhen Kharuzhy authored
There is no way to track year in the i.MX1 RTC: Days Counter register is 9-bit wide only. Attempt to save date after 1970-01-01 plus 512 days causes endless loop in mxc_rtc_set_mmss(). Fix this by resetting year to 1970. [akpm@linux-foundation.org: use conventional comment layout] Signed-off-by:
-
Ondrej Zary authored
Fix writing to NVRAM bank 2 in rtc-cmos driver. It never worked since its introduction in 2.6.28 because of a typo. Signed-off-by:
Ondrej Zary <linux@rainbow-software.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by:
-
David Daney authored
... by selecting ARCH_BINFMT_ELF_RANDOMIZE_PIE Signed-off-by:
David Daney <david.daney@cavium.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
David Daney authored
Randomization of PIE load address is hard coded in binfmt_elf.c for X86 and ARM. Create a new Kconfig variable (CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE) for this and use it instead. Thus architecture specific policy is pushed out of the generic binfmt_elf.c and into the architecture Kconfig files. X86 and ARM Kconfigs are modified to select the new variable so there is no change in behavior. A follow on patch will select it for MIPS too. Signed-off-by:
H. Peter Anvin <hpa@zytor.com> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
Joakim Tjernlund authored
Taking a pointer reference to each row in the crc table matrix, one can reduce the inner loop with a few insn's Signed-off-by:
Joakim Tjernlund <Joakim.Tjernlund@transmode.se> Cc: Bob Pearson <rpearson@systemfabricworks.com> Cc: Frank Zago <fzago@systemfabricworks.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by:
-
Andy Whitcroft authored
Fix up type and cast spacing checks such that all occurences on a line are examined and reported. For example the line below has a valid cast and a bad type, but currently we check the cast first which is good and stop: u16* bar = (u16 *)baz; We will also only report one of the errors in this example: u16* bar = (u16*)bad; Move to iterating across all casts and all types, reporting any failure. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by:Andy Whitcroft <apw@canonical.com> Cc: Joe Perches <joe@perches.com> Signed-off-by:
-
Andy Whitcroft authored
typeof may have various more complex forms as its arguement, not just an identifier. For now allow us to leak to the first close perenthesis ')'. Signed-off-by:
-
Andy Whitcroft authored
Ensure the cast type is unique in the context parser, we do not want them to detect as a comma ','. Signed-off-by:
-
Andy Whitcroft authored
Signed-off-by:
-
Andy Whitcroft authored
We are incorrectly matching square brackets '[' and ']' leading to false positives on more complex functions as below: return (dt3155_fbuffer[m]->ready_head - dt3155_fbuffer[m]->ready_len + dt3155_fbuffer[m]->nbuffers)% (dt3155_fbuffer[m]->nbuffers); Signed-off-by: -
Andy Whitcroft authored
It is common to stub out a function as below, this is triggering a complex macro format incorrectly. Sort this out: #define cma_early_regions_reserve(reserve) do { } while (0) Signed-off-by: -
Andy Whitcroft authored
The following fragment defeats the DEVICE_ATTR style handing, check for and ignore the close brace '}' in this context: int foo() { } DEVICE_ATTR(link_power_management_policy, S_IRUGO | S_IWUSR, ata_scsi_lpm_show, ata_scsi_lpm_put); EXPORT_SYMBOL_GPL(dev_attr_link_power_management_policy); Signed-off-by: -
Andy Whitcroft authored
The intent of this check is to catch the options which the user will see and ensure they are properly described. It is also common for internal only options to have a brief description. Allow this form. Reported-by:
Steven Rostedt <rostedt@goodmis.org> Tested-by:
-
Andy Whitcroft authored
In the middle of a long definition or similar, there is no possibility of finding a smaller sub-statement. Optimise this case by skipping statement aquirey where there are no starts of statement (open brace '{' or semi-colon ';'). We are likely to scan slightly more than needed still but this is safest. Signed-off-by: -
Andy Whitcroft authored
Inserting a # into the modifiers list will incorrectly add the null string to the modifiers list, leading to an infinite loop. As neither of these is a valid modifier form simply ignore them. Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
Joe Perches authored
Improve the checking of arguments to memset and min/max tests. Move the checking of min/max to statement blocks instead of single line. Change $Constant to allow any case type 0x initiator and trailing ul specifier. Add $FuncArg type as any function argument with or without a cast. Print the whole statement when showing memset or min/max messages. Improve the memset with 0 as 3rd argument error message. There are still weaknesses in the $FuncArg and $Constant code as arbitrary parentheses and negative signs are not generically supported. [akpm@linux-foundation.org: fix per Andy] Signed-off-by:
-
Andy Whitcroft authored
Move the memset checks over to work against the statement. Also add checks for 0 and 1 used as lengths. Generally these indicate badly ordered parameters. Signed-off-by:
-
Andy Whitcroft authored
When looking for a statement we currently run on through preprocessor commands. This means that a header file with just definitions is parsed over and over again combining all of the lines from the current line to the end of file leading to severe performance issues. Fix up context accumulation to track preprocessor commands and stop when reaching the end of them. At the same time vastly simplify the #define handling. Signed-off-by:
-
Joe Perches authored
Add a warn for not using __printf. Signed-off-by:
-
