- 01 Sep, 2017 1 commit
-
-
Bart Van Assche authored
If a pass-through request is submitted then blk_get_request() initializes that request by calling scsi_initialize_rq(). Also call this function for filesystem requests. Introduce CMD_INITIALIZED to keep track of whether or not a request has already been initialized. Signed-off-by:
Bart Van Assche <bart.vanassche@wdc.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Brian King <brking@linux.vnet.ibm.com> Cc: Hannes Reinecke <hare@suse.com> Cc: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by:
Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com>
-
- 31 Aug, 2017 7 commits
-
-
Quinn Tran authored
After relogin is sucessful, "send_els_logo" flag needs to be reinitialized. This will allow next re-login to happen successfully. In target mode, this flag was not reset correctly, causing IO's failure during reset recovery and port ON/OFF test cases from initiator. Signed-off-by:
Quinn Tran <quinn.tran@cavium.com> Signed-off-by:
Sawan Chandak <sawan.chandak@cavium.com> Signed-off-by:
Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by:
-
Quinn Tran authored
Call Trace: [<ffffffff81341687>] dump_stack+0x6b/0xa4 [<ffffffff810c3e30>] ? print_irqtrace_events+0xd0/0xe0 [<ffffffff8109e3c3>] ___might_sleep+0x183/0x240 [<ffffffff8109e4d2>] __might_sleep+0x52/0x90 [<ffffffff811fe17b>] kmem_cache_alloc_trace+0x5b/0x300 [<ffffffff810c666b>] ? __lock_acquired+0x30b/0x420 [<ffffffffa0733c28>] qla2x00_alloc_fcport+0x38/0x2a0 [qla2xxx] [<ffffffffa07217f4>] ? qla2x00_do_work+0x34/0x2b0 [qla2xxx] [<ffffffff816cc82b>] ? _raw_spin_lock_irqsave+0x7b/0x90 [<ffffffffa072169a>] ? qla24xx_create_new_sess+0x3a/0x160 [qla2xxx] [<ffffffffa0721723>] qla24xx_create_new_sess+0xc3/0x160 [qla2xxx] [<ffffffff810c91ed>] ? trace_hardirqs_on+0xd/0x10 [<ffffffffa07218f8>] qla2x00_do_work+0x138/0x2b0 [qla2xxx] Signed-off-by:
Quinn Tran <quinn.tran@qlogic.com> Signed-off-by:
-
Darren Trap authored
Signed-off-by:
Darren Trap <darren.trap@cavium.com> Signed-off-by:
-
Johannes Thumshirn authored
Since commit 7401bc18 ("scsi: qla2xxx: Add FC-NVMe command handling") we make use of 'struct nvmefc_fcp_req' in qla24xx_nvme_iocb_entry() without including linux/nvme-fc-driver.h where it is defined. Add linux/nvme-fc-driver.h (and scsi/fc/fc_fs.h as nvme-fc-driver.h needs the definition of 'struct fc_ba_rjt' from scsi/fc/fc_fs.h) to the header files included by qla_isr.c. Fixes: 7401bc18 ("scsi: qla2xxx: Add FC-NVMe command handling") Signed-off-by:
-
Nikola Pajkovsky authored
aac_convert_sgraw2() kmalloc memory and return -1 on error, which should be -ENOMEM. However, nobody is checking return value, so with this change, -ENOMEM is propagated to upper layer. Signed-off-by:
Nikola Pajkovsky <npajkovsky@suse.cz> Reviewed-by:
Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com> Signed-off-by:
-
Nikola Pajkovsky authored
unsigned long byte_count = 0; nseg = scsi_dma_map(scsicmd); if (nseg < 0) return nseg; if (nseg) { ... } return byte_count; is equal to unsigned long byte_count = 0; nseg = scsi_dma_map(scsicmd); if (nseg <= 0) return nseg; ... return byte_count; No other code has changed. [mkp: fix checkpatch complaints] Signed-off-by: -
Nikola Pajkovsky authored
fix stupid indent error, no rocket science here. Signed-off-by:
-
- 30 Aug, 2017 7 commits
-
-
Christoph Hellwig authored
Simplify the SMP passthrough code by switching it to the generic bsg-lib helpers that abstract away the details of the request code, and gets drivers out of seeing struct scsi_request. For the libsas host SMP code there is a small behavior difference in that we now always clear the residual len for successful commands, similar to the three other SMP handler implementations. Given that there is no partial command handling in the host SMP handler this should not matter in practice. [mkp: typos and checkpatch fixes] Signed-off-by:
-
Christoph Hellwig authored
The SAS transport class will do the right thing and not register the BSG node if now smp_handler method is present. Signed-off-by:
-
Christoph Hellwig authored
The SAS transport class will do the right thing and not register the BSG node if now smp_handler method is present. Signed-off-by:
Don Brace <don.brace@microsemi.com> Signed-off-by:
-
Christoph Hellwig authored
The SAS code will need it. Also mark the name argument const to match bsg_register_queue. Signed-off-by:
-
Bart Van Assche authored
Introduce struct scsi_vpd for the VPD page length, data and the RCU head that will be used to free the VPD data. Use kfree_rcu() instead of kfree() to free VPD data. Move the VPD buffer pointer check inside the RCU read lock in the sysfs code. Only annotate pointers that are shared across threads with __rcu. Use rcu_dereference() when dereferencing an RCU pointer. This patch suppresses about twenty sparse complaints about the vpd_pg8[03] pointers. This patch also fixes a race condition, namely that updating of the VPD pointers and length variables in struct scsi_device was not atomic with reference to the code reading these variables. See also "Does the update code tolerate concurrent accesses?" in Documentation/RCU/checklist.txt. Fixes: commit 09e2b0b1 ("scsi: rescan VPD attributes") Signed-off-by:
Hannes Reinecke <hare@suse.de> Reviewed-by:
Shane Seymour <shane.seymour@hpe.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Johannes Thumshirn <jthumshirn@suse.de> Cc: Shane Seymour <shane.seymour@hpe.com> Signed-off-by:
-
Bart Van Assche authored
Introduce the scsi_get_vpd_buf() and scsi_update_vpd_page() functions. The only functional change in this patch is that if updating page 0x80 fails that it is attempted to update page 0x83. Signed-off-by:
-
Bart Van Assche authored
A common pattern in RCU code is to assign a new value to an RCU pointer after having read and stored the old value. Introduce a macro for this pattern. Signed-off-by:
Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Johannes Thumshirn <jthumshirn@suse.de> Cc: Shane M Seymour <shane.seymour@hpe.com> Signed-off-by:
-
- 29 Aug, 2017 1 commit
-
-
Hannes Reinecke authored
A merge error crept in when formatting commit af167bc4 ("scsi: qlogicpti: move bus reset to host reset") Fixes: af167bc4 ("scsi: qlogicpti: move bus reset to host reset") Signed-off-by:
Hannes Reinecke <hare@suse.com> Signed-off-by:
-
- 25 Aug, 2017 24 commits
-
-
Arnd Bergmann authored
This is an interesting regression with gcc-8, showing a harmless warning for correct code: In file included from include/linux/kernel.h:13:0, ... from drivers/scsi/lpfc/lpfc_debugfs.c:23: include/linux/printk.h:301:2: error: 'eq' may be used uninitialized in this function [-Werror=maybe-uninitialized] printk(KERN_ERR pr_fmt(fmt), ##__VA_ARGS__) ^~~~~~ In file included from drivers/scsi/lpfc/lpfc_debugfs.c:58:0: drivers/scsi/lpfc/lpfc_debugfs.h:451:31: note: 'eq' was declared here I managed to reduce the warning into a small test case for gcc-8 that I reported in the gcc bugzilla[1]. As a workaround, this changes the logic to move the two assignments of 'eq' out of the conditions and instead make the index conditional. This works for all configurations I tried and avoids adding a bogus initialization. Acked-by:James Smart <james.smart@broadcom.com> Link: [1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=81958Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Arnd Bergmann authored
The only reference to lpfc_nvmet_replenish_context() is inside of an disabled: drivers/scsi/lpfc/lpfc_nvmet.c:1457:1: error: 'lpfc_nvmet_replenish_context' defined but not used [-Werror=unused-function] This replaces the preprocessor conditional with a C condition, so the compiler can see that the function is intentionally unused. Fixes: 9a38e4f1c82f ("scsi: lpfc: Fix MRQ > 1 context list handling") Signed-off-by: -
Uma Krishnan authored
The ioctl DK_CAPI_VLUN_RESIZE can fail if the allocated vlun size is reduced from almost maximum capacity and then increased again. The shrink_lxt() routine is currently using the SISL_ASTATUS_MASK to mask the higher 48 bits of the lxt entry. This is unnecessary and incorrect as it uses a mask designed for the asynchronous interrupt status register. When the 4 port support was added to cxlflash, the SISL_ASTATUS_MASK was updated to reflect the status bits for all 4 ports. This change indirectly affected the shrink_lxt() code path. To extract the base, simply shift the bits without masking. Fixes: 56518072 ("scsi: cxlflash: SISlite updates to support 4 ports") Signed-off-by:
Uma Krishnan <ukrishn@linux.vnet.ibm.com> Signed-off-by:
-
Matthew R. Ochs authored
The AFU recovery routine uses an interruptible mutex to control the flow of in-flight recoveries. Upon receiving an interruptible signal the code branches to a common exit path which wrongly assumes the mutex is held. Add a local variable to track when the mutex should be unlocked. Signed-off-by:
Matthew R. Ochs <mrochs@linux.vnet.ibm.com> Signed-off-by:
-
Matthew R. Ochs authored
The AFU termination sequence has been refactored over time such that the main tear down routine, term_afu(), can no longer can be invoked with a NULL AFU pointer. Remove the unnecessary existence check from term_afu(). Signed-off-by:
-
Arvind Yadav authored
vio_device_id are not supposed to change at runtime. All functions working with vio_device_id provided by <asm/vio.h> work with const vio_device_id. So mark the non-const structs as const. Signed-off-by:
Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by:
-
Jonathan Corbet authored
The kerneldoc comment for scsi_initialize_rq() neglected to document the "rq" parameter, leading to this docs build warning: ./drivers/scsi/scsi_lib.c:1116: warning: No description found for parameter 'rq' Document the parameter and make the build slightly quieter. [mkp: used wording suggested by Bart] Signed-off-by:
Jonathan Corbet <corbet@lwn.net> Signed-off-by:
-
Calvin Owens authored
Currently we free the resources backing the enclosure device before we call device_unregister(). This is racy: during rmmod of low-level SCSI drivers that hook into enclosure, we end up with a small window of time during which writing to /sys can OOPS. Example trace with mpt3sas: general protection fault: 0000 [#1] SMP KASAN Modules linked in: mpt3sas(-) <...> RIP: [<ffffffffa0388a98>] ses_get_page2_descriptor.isra.6+0x38/0x220 [ses] Call Trace: [<ffffffffa0389d14>] ses_set_fault+0xf4/0x400 [ses] [<ffffffffa0361069>] set_component_fault+0xa9/0xf0 [enclosure] [<ffffffff8205bffc>] dev_attr_store+0x3c/0x70 [<ffffffff81677df5>] sysfs_kf_write+0x115/0x180 [<ffffffff81675725>] kernfs_fop_write+0x275/0x3a0 [<ffffffff8151f810>] __vfs_write+0xe0/0x3e0 [<ffffffff8152281f>] vfs_write+0x13f/0x4a0 [<ffffffff81526731>] SyS_write+0x111/0x230 [<ffffffff828b401b>] entry_SYSCALL_64_fastpath+0x13/0x94 Fortunately the solution is extremely simple: call device_unregister() before we free the resources, and the race no longer exists. The driver core holds a reference over ->remove_dev(), so AFAICT this is safe. Signed-off-by:
Calvin Owens <calvinowens@fb.com> Acked-by:
-
Hannes Reinecke authored
VMWare ESXi emulates an mptsas HBA, but exposes all drives as direct-attached SAS drives. This it not how the driver originally envisioned things; SAS drives were supposed to be connected via an expander, and only SATA drives would be direct attached. As such, any hotplug event for direct-attach SAS drives was silently ignored, and the guest failed to detect new drives from within a VMWare ESXi environment. [mkp: typos] Bugzilla: https://bugzilla.suse.com/show_bug.cgi?id=1030850Signed-off-by:
-
Bhumika Goyal authored
Make these const as they are only stored in the type field of a device structure, which is const. Done using Coccinelle. Signed-off-by:
Bhumika Goyal <bhumirks@gmail.com> Signed-off-by:
-
weiping zhang authored
gd->minors has been set when call alloc_disk() in sd_probe. Signed-off-by:
weiping zhang <zhangweiping@didichuxing.com> Signed-off-by:
-
Hannes Reinecke authored
Just displaying some different information; drop it. Signed-off-by:
-
Hannes Reinecke authored
There's no need to keep the private data for a device in a separate list; better to store it in ->hostdata and do away with the additional list. Signed-off-by:
David Kershner <david.kershner@unisys.com> Signed-off-by:
-
Hannes Reinecke authored
megaraid_mbox only has one reset function, and that is a host reset. So drop the duplicate bus reset and device reset functions. Signed-off-by:
-
Hannes Reinecke authored
Never used anywhere. Signed-off-by:
-
Hannes Reinecke authored
bus reset always returns SUCCESS, meaning host reset was never tested. At the same time the only difference to the HBA is a missing call to NCR_700_chip_reset(). So add the missing call to bus reset, drop host reset, and move bus reset to host reset. Signed-off-by:
-
Hannes Reinecke authored
The driver has both a bus and a host reset, where the host reset does a bus reset followed by an attempt to reset the chip registers to a default state. However, as the bus reset always returned SUCCESS the host reset was never called, so the functionality of the register reset function was never validated. Additionally, tha AIC-6260 chip has a hard reset line, which actually should be preferred for a host reset. But I haven't found a way how this can be triggered via software, so take the safe approach and drop the host reset. [mkp: typo] Signed-off-by:
-
Hannes Reinecke authored
bus reset is a host reset without nsp32hw_init(), and will always return SUCCESS, thus disabling the use of host reset. So drop bus reset in favour of host reset. Signed-off-by:
-
Hannes Reinecke authored
qedf has a host reset handler, but as the bus reset handler is a stub always returning SUCCESS the host reset is never invoked. So drop the bus reset handler. Signed-off-by:
Chad Dupuis <chad.dupuis@cavium.com> Signed-off-by:
-
Hannes Reinecke authored
bus_reset and host_reset are the same functions, so drop bus_reset. Signed-off-by:
-
Hannes Reinecke authored
host_reset and bus_reset is the same function, so drop bus reset. Signed-off-by:
-
Hannes Reinecke authored
The bus reset handler is really a host reset. Signed-off-by:
-
Hannes Reinecke authored
The bus reset handler really is a host reset, so move it to eh_bus_reset_handler. Signed-off-by:
Finn Thain <fthain@telegraphics.com.au> Reviewed-by:
-
Hannes Reinecke authored
The bus reset function is really a host reset, so move it to eh_host_reset_handler. Signed-off-by:
-
