- 13 Jan, 2012 40 commits
-
-
Michel Dänzer authored
Reported-by:
Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
Michel Dänzer <michel.daenzer@amd.com> Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
Dave Airlie <airlied@redhat.com>
-
Alan Cox authored
[This fixes a crash on boot if the system is plugged into an HDTV so it's probably appropriate to push even though it didn't make the window. We could be cleverer about this but the simple version seems to be the safe one] From: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> At the moment we cannot allocate more than stolen memory size for framebuffers. To get around that issues we discard modes that doesn't fit. This is a temporary solution until we can freely allocate framebuffer memory. [Currently the framebuffer needs to be linear in kernel space due to limits in the kernel fb layer - AC] Signed-off-by:
Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Signed-off-by:
Alan Cox <alan@linux.intel.com> Signed-off-by:
-
Ben Skeggs authored
There exists at least one NVIDIA GPU (Quadro NVS 300) that has a DMS-59 connector which is capable of supporting DisplayPort, TMDS and VGA on a single connector. We need to bump the allowed encoder limit to support all three configs. Signed-off-by:
Ben Skeggs <bskeggs@redhat.com> Signed-off-by:
-
Jean Delvare authored
Module parameter descriptions don't take a trailing \n, otherwise it breaks formatting of modinfo's output. Also add missing space after comma. Signed-off-by:
Jean Delvare <jdelvare@suse.de> Cc: David Airlie <airlied@linux.ie> Reviewed-by:
-
Alex Deucher authored
Packet2 is only one dword. Signed-off-by:
Jerome Glisse <jglisse@redhat.com> Signed-off-by:
-
Konrad Rzeszutek Wilk authored
. It was useful during development, but now on a production system we can get this (if the user forgot to upload the firmware): [drm] radeon: irq initialized. [drm] GART: num cpu pages 131072, num gpu pages 131072 [drm] radeon: ib pool ready. [drm] Loading SUMO Microcode r600_cp: Failed to load firmware "radeon/SUMO_pfp.bin" atl1c 0000:03:00.0: version 1.0.1.0-NAPI.213057] [drm:evergreen_startup] *ERROR* Failed to load firmware! radeon 0000:00:01.0: disabling GPU acceleration 88] radeon 0000:00:01.0: ffff8801bb782400 unpin not necessary ------------[ cut here ]------------ WARNING: at /home/konrad/linux-linus/drivers/gpu/drm/ttm/ttm_page_alloc_dma.c:956 ttm_dma_unpopulate+0x79/0x300 [ttm]() Hardware name: System Product Name Modules linked in: e1000e atl1c radeon(+) ahci libahci libata scsi_mod fbcon tileblit font ttm bitblit softcursor drm_kms_helper wmi xen_blkfront xen_netfront fb_sys_fops sysimgblt sysfillrect syscopyarea xenfs xen_privcmd Pid: 1600, comm: modprobe Not tainted 3.2.0-06100-ge343a895 #1 Call Trace: [<ffffffff8108973a>] warn_slowpath_common+0x7a/0xb0 [<ffffffff81089785>] warn_slowpath_null+0x15/0x20 [<ffffffffa0060309>] ttm_dma_unpopulate+0x79/0x300 [ttm] [<ffffffffa01341c0>] radeon_ttm_tt_unpopulate+0x120/0x130 [radeon] [<ffffffffa0056e0c>] ttm_tt_destroy+0x2c/0x70 [ttm] [<ffffffffa0057a4e>] ttm_bo_cleanup_memtype_use+0x3e/0x80 [ttm] [<ffffffffa00595a1>] ttm_bo_release+0x251/0x280 [ttm] [<ffffffffa0059610>] ttm_bo_unref+0x40/0x60 [ttm] [<ffffffffa0134d02>] radeon_bo_unref+0x42/0x80 [radeon] [<ffffffffa0186dfb>] radeon_sa_bo_manager_fini+0x6b/0x80 [radeon] [<ffffffffa0146b8f>] radeon_ib_pool_fini+0x6f/0x90 [radeon] [<ffffffffa014be49>] r100_ib_fini+0x19/0x20 [radeon] [<ffffffffa017b47e>] evergreen_init+0x1ee/0x2d0 [radeon] The big WARN() has nothing to do with the culprit - which is that the firmware was not loaded. So lets remove the WARN() from the TTM DMA code. Signed-off-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by:
-
Linus Torvalds authored
Andrew explains: - various misc stuff - Most of the rest of MM: memcg, threaded hugepages, others. - cpumask - kexec - kdump - some direct-io performance tweaking - radix-tree optimisations - new selftests code A note on this: often people will develop a new userspace-visible feature and will develop userspace code to exercise/test that feature. Then they merge the patch and the selftest code dies. Sometimes we paste it into the changelog. Sometimes the code gets thrown into Documentation/(!). This saddens me. So this patch creates a bare-bones framework which will henceforth allow me to ask people to include their test apps in the kernel tree so we can keep them alive. Then when people enhance or fix the feature, I can ask them to update the test app too. The infrastruture is terribly trivial at present - let's see how it evolves. - checkpoint/restart feature work. A note on this: this is a project by various mad Russians to perform c/r mainly from userspace, with various oddball helper code added into the kernel where the need is demonstrated. So rather than some large central lump of code, what we have is little bits and pieces popping up in various places which either expose something new or which permit something which is normally kernel-private to be modified. The overall project is an ongoing thing. I've judged that the size and scope of the thing means that we're more likely to be successful with it if we integrate the support into mainline piecemeal rather than allowing it all to develop out-of-tree. However I'm less confident than the developers that it will all eventually work! So what I'm asking them to do is to wrap each piece of new code inside CONFIG_CHECKPOINT_RESTORE. So if it all eventually comes to tears and the project as a whole fails, it should be a simple matter to go through and delete all trace of it. This lot pretty much wraps up the -rc1 merge for me. * akpm: (96 commits) unlzo: fix input buffer free ramoops: update parameters only after successful init ramoops: fix use of rounddown_pow_of_two() c/r: prctl: add PR_SET_MM codes to set up mm_struct entries c/r: procfs: add start_data, end_data, start_brk members to /proc/$pid/stat v4 c/r: introduce CHECKPOINT_RESTORE symbol selftests: new x86 breakpoints selftest selftests: new very basic kernel selftests directory radix_tree: take radix_tree_path off stack radix_tree: remove radix_tree_indirect_to_ptr() dio: optimize cache misses in the submission path vfs: cache request_queue in struct block_device fs/direct-io.c: calculate fs_count correctly in get_more_blocks() drivers/parport/parport_pc.c: fix warnings panic: don't print redundant backtraces on oops sysctl: add the kernel.ns_last_pid control kdump: add udev events for memory online/offline include/linux/crash_dump.h needs elf.h kdump: fix crash_kexec()/smp_send_stop() race in panic() kdump: crashk_res init check for /sys/kernel/kexec_crash_size ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (69 commits) pptp: Accept packet with seq zero RDS: Remove some unused iWARP code net: fsl: fec: handle 10Mbps speed in RMII mode drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c: add missing iounmap drivers/net/ethernet/tundra/tsi108_eth.c: add missing iounmap ksz884x: fix mtu for VLAN net_sched: sfq: add optional RED on top of SFQ dp83640: Fix NOHZ local_softirq_pending 08 warning gianfar: Fix invalid TX frames returned on error queue when time stamping gianfar: Fix missing sock reference when processing TX time stamps phylib: introduce mdiobus_alloc_size() net: decrement memcg jump label when limit, not usage, is changed net: reintroduce missing rcu_assign_pointer() calls inet_diag: Rename inet_diag_req_compat into inet_diag_req inet_diag: Rename inet_diag_req into inet_diag_req_v2 bond_alb: don't disable softirq under bond_alb_xmit mac80211: fix rx->key NULL pointer dereference in promiscuous mode nl80211: fix old station flags compatibility mdio-octeon: use an unique MDIO bus name. mdio-gpio: use an unique MDIO bus name. ...
-
Sascha Hauer authored
unlzo modifies the pointer to in_buf, so we have to free the original buffer, not the modified pointer. Signed-off-by:
Sascha Hauer <s.hauer@pengutronix.de> Cc: Lasse Collin <lasse.collin@tukaani.org> Cc: Namhyung Kim <namhyung@gmail.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Kees Cook authored
If a platform device exists on the system, but ramoops fails to attach to it, the module parameters are overridden before ramoops can fall back and try to use passed module parameters. Move update to end of init routine. Signed-off-by:
Kees Cook <keescook@chromium.org> Cc: Marco Stornelli <marco.stornelli@gmail.com> Cc: Sergiu Iordache <sergiu@chromium.org> Cc: Seiji Aguchi <seiji.aguchi@hds.com> Signed-off-by:
-
Marco Stornelli authored
The return value of rounddown_pow_of_two wasn't evaluated, so the operation was a no-op. Signed-off-by:
Marco Stornelli <marco.stornelli@gmail.com> Reported-by:
WANG Cong <xiyou.wangcong@gmail.com> Signed-off-by:
-
Cyrill Gorcunov authored
When we restore a task we need to set up text, data and data heap sizes from userspace to the values a task had at checkpoint time. This patch adds auxilary prctl codes for that. While most of them have a statistical nature (their values are involved into calculation of /proc/<pid>/statm output) the start_brk and brk values are used to compute an allowed size of program data segment expansion. Which means an arbitrary changes of this values might be dangerous operation. So to restrict access the following requirements applied to prctl calls: - The process has to have CAP_SYS_ADMIN capability granted. - For all opcodes except start_brk/brk members an appropriate VMA area must exist and should fit certain VMA flags, such as: - code segment must be executable but not writable; - data segment must not be executable. start_brk/brk values must not intersect with data segment and must not exceed RLIMIT_DATA resource limit. Still the main guard is CAP_SYS_ADMIN capability check. Note the kernel should be compiled with CONFIG_CHECKPOINT_RESTORE support otherwise these prctl calls will return -EINVAL. [akpm@linux-foundation.org: cache current->mm in a local, saving 200 bytes text] Signed-off-by:
Cyrill Gorcunov <gorcunov@openvz.org> Reviewed-by:
-
Cyrill Gorcunov authored
The mm->start_code/end_code, mm->start_data/end_data, mm->start_brk are involved into calculation of program text/data segment sizes (which might be seen in /proc/<pid>/statm) and into brk() call final address. For restore we need to know all these values. While mm->start_code/end_code already present in /proc/$pid/stat, the rest members are not, so this patch brings them in. The restore procedure of these members is addressed in another patch using prctl(). Signed-off-by:
Serge Hallyn <serge.hallyn@canonical.com> Reviewed-by:
KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Tejun Heo <tj@kernel.org> Cc: Andrew Vagin <avagin@openvz.org> Cc: Vasiliy Kulikov <segoon@openwall.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
-
Cyrill Gorcunov authored
For checkpoint/restore we need auxilary features being compiled into the kernel, such as additional prctl codes, /proc/<pid>/map_files and etc... but same time these features are not mandatory for a regular kernel so CHECKPOINT_RESTORE config symbol should bring a way to disable them all at once if one wish to get rid of additional functionality. Signed-off-by:
-
Frederic Weisbecker authored
Bring a first selftest in the relevant directory. This tests several combinations of breakpoints and watchpoints in x86, as well as icebp traps and int3 traps. Given the amount of breakpoint regressions we raised after we merged the generic breakpoint infrastructure, such selftest became necessary and can still serve today as a basis for new patches that touch the do_debug() path. Signed-off-by:
Frederic Weisbecker <fweisbec@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jason Wessel <jason.wessel@windriver.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Michal Marek <mmarek@suse.cz> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by:
-
Frederic Weisbecker authored
Bring a new kernel selftests directory in tools/testing/selftests. To add a new selftest, create a subdirectory with the sources and a makefile that creates a target named "run_test" then add the subdirectory name to the TARGET var in tools/testing/selftests/Makefile and tools/testing/selftests/run_tests script. This can help centralizing and maintaining any useful selftest that developers usually tend to let rust in peace on some random server. Suggested-by:
-
Hugh Dickins authored
Down, down in the deepest depths of GFP_NOIO page reclaim, we have shrink_page_list() calling __remove_mapping() calling __delete_from_ swap_cache() or __delete_from_page_cache(). You would not expect those to need much stack, but in fact they call radix_tree_delete(): which declares a 192-byte radix_tree_path array on its stack (to record the node,offsets it visits when descending, in case it needs to ascend to update them). And if any tag is still set [1], that calls radix_tree_tag_clear(), which declares a further such 192-byte radix_tree_path array on the stack. (At least we have interrupts disabled here, so won't then be pushing registers too.) That was probably a good choice when most users were 32-bit (array of half the size), and adding fields to radix_tree_node would have bloated it unnecessarily. But nowadays many are 64-bit, and each radix_tree_node contains a struct rcu_head, which is only used when freeing; whereas the radix_tree_path info is only used for updating the tree (deleting, clearing tags or setting tags if tagged) when a lock must be held, of no interest when accessing the tree locklessly. So add a parent pointer to the radix_tree_node, in union with the rcu_head, and remove all uses of the radix_tree_path. There would be space in that union to save the offset when descending as before (we can argue that a lock must already be held to exclude other users), but recalculating it when ascending is both easy (a constant shift and a constant mask) and uncommon, so it seems better just to do that. Two little optimizations: no need to decrement height when descending, adjusting shift is enough; and once radix_tree_tag_if_tagged() has set tag on a node and its ancestors, it need not ascend from that node again. perf on the radix tree test harness reports radix_tree_insert() as 2% slower (now having to set parent), but radix_tree_delete() 24% faster. Surely that's an exaggeration from rtth's artificially low map shift 3, but forcing it back to 6 still rates radix_tree_delete() 8% faster. [1] Can a pagecache tag (dirty, writeback or towrite) actually still be set at the time of radix_tree_delete()? Perhaps not if the filesystem is well-behaved. But although I've not tracked any stack overflow down to this cause, I have observed a curious case in which a dirty tag is set and left set on tmpfs: page migration's migrate_page_copy() happens to use __set_page_dirty_nobuffers() to set PageDirty on the newpage, and that sets PAGECACHE_TAG_DIRTY as a side-effect - harmless to a filesystem which doesn't use tags, except for this stack depth issue. Signed-off-by:
Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: Dave Chinner <david@fromorbit.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Nai Xia <nai.xia@gmail.com> Signed-off-by:
-
Xiao Guangrong authored
It is not used anymore, remove it Signed-off-by:
Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Acked-by:
-
Andi Kleen authored
Some investigation of a transaction processing workload showed that a major consumer of cycles in __blockdev_direct_IO is the cache miss while accessing the block size. This is because it has to walk the chain from block_dev to gendisk to queue. The block size is needed early on to check alignment and sizes. It's only done if the check for the inode block size fails. But the costly block device state is unconditionally fetched. - Reorganize the code to only fetch block dev state when actually needed. Then do a prefetch on the block dev early on in the direct IO path. This is worth it, because there is substantial code run before we actually touch the block dev now. - I also added some unlikelies to make it clear the compiler that block device fetch code is not normally executed. This gave a small, but measurable improvement on a large database benchmark (about 0.3%) [akpm@linux-foundation.org: coding-style fixes] [sfr@canb.auug.org.au: using prefetch requires including prefetch.h] Signed-off-by:
Andi Kleen <ak@linux.intel.com> Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
-
Andi Kleen authored
This makes it possible to get from the inode to the request_queue with one less cache miss. Used in followon optimization. The livetime of the pointer is the same as the gendisk. This assumes that the queue will always stay the same in the gendisk while it's visible to block_devices. I think that's safe correct? Signed-off-by:
Jeff Moyer <jmoyer@redhat.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Tao Ma authored
In get_more_blocks(), we use dio_count to calcuate fs_count and do some tricky things to increase fs_count if dio_count isn't aligned. But actually it still has some corner cases that can't be coverd. See the following example: dio_write foo -s 1024 -w 4096 (direct write 4096 bytes at offset 1024). The same goes if the offset isn't aligned to fs_blocksize. In this case, the old calculation counts fs_count to be 1, but actually we will write into 2 different blocks (if fs_blocksize=4096). The old code just works, since it will call get_block twice (and may have to allocate and create extents twice for filesystems like ext4). So we'd better call get_block just once with the proper fs_count. Signed-off-by:
Tao Ma <boyu.mt@taobao.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Christoph Hellwig <hch@lst.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Andrew Morton authored
drivers/parport/parport_pc.c: In function '__check_irq': drivers/parport/parport_pc.c:3415: warning: return from incompatible pointer type drivers/parport/parport_pc.c: In function '__check_dma': drivers/parport/parport_pc.c:3417: warning: return from incompatible pointer type Signed-off-by:
-
Andi Kleen authored
When an oops causes a panic and panic prints another backtrace it's pretty common to have the original oops data be scrolled away on a 80x50 screen. The second backtrace is quite redundant and not needed anyways. So don't print the panic backtrace when oops_in_progress is true. [akpm@linux-foundation.org: add comment] Signed-off-by:
-
Pavel Emelyanov authored
The sysctl works on the current task's pid namespace, getting and setting its last_pid field. Writing is allowed for CAP_SYS_ADMIN-capable tasks thus making it possible to create a task with desired pid value. This ability is required badly for the checkpoint/restore in userspace. This approach suits all the parties for now. Signed-off-by:
Pavel Emelyanov <xemul@parallels.com> Acked-by:
Tejun Heo <tj@kernel.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Serge Hallyn <serue@us.ibm.com> Signed-off-by:
-
Michael Holzheu authored
Currently no udev events for memory hotplug "online" and "offline" are generated: # udevadm monitor # echo offline > /sys/devices/system/memory/memory4/state ==> No event When kdump is loaded, kexec detects the current memory configuration and stores it in the pre-allocated ELF core header. Therefore, for kdump it is necessary to reload the kdump kernel with kexec when the memory configuration changes (e.g. for online/offline hotplug memory). In order to do this automatically, udev rules should be used. This kernel patch adds udev events for "online" and "offline". Together with this kernel patch, the following udev rules for online/offline have to be added to "/etc/udev/rules.d/98-kexec.rules": SUBSYSTEM=="memory", ACTION=="online", PROGRAM="/etc/init.d/kdump restart" SUBSYSTEM=="memory", ACTION=="offline", PROGRAM="/etc/init.d/kdump restart" [sfr@canb.auug.org.au: fixups for class to subsystem conversion] Signed-off-by:
Michael Holzheu <holzheu@linux.vnet.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: Dave Hansen <haveblue@us.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Greg KH <greg@kroah.com> Signed-off-by:
-
Fabio Estevam authored
Building an ARM target we get the following warnings: CC arch/arm/kernel/setup.o In file included from arch/arm/kernel/setup.c:39: arch/arm/include/asm/elf.h:102:1: warning: "vmcore_elf64_check_arch" redefined In file included from arch/arm/kernel/setup.c:24: include/linux/crash_dump.h:30:1: warning: this is the location of the previous definition Quoting Russell King: "linux/crash_dump.h makes no attempt to include asm/elf.h, but it depends on stuff in asm/elf.h to determine how stuff inside this file is defined at parse time. So, if asm/elf.h is included after linux/crash_dump.h or not at all, you get a different result from the situation where asm/elf.h is included before." So add elf.h header to crash_dump.h to avoid this problem. The original discussion about this can be found at: http://www.spinics.net/lists/arm-kernel/msg154113.htmlSigned-off-by:
Fabio Estevam <fabio.estevam@freescale.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: <stable@vger.kernel.org> [3.2.1] Signed-off-by:
-
Michael Holzheu authored
When two CPUs call panic at the same time there is a possible race condition that can stop kdump. The first CPU calls crash_kexec() and the second CPU calls smp_send_stop() in panic() before crash_kexec() finished on the first CPU. So the second CPU stops the first CPU and therefore kdump fails: 1st CPU: panic()->crash_kexec()->mutex_trylock(&kexec_mutex)-> do kdump 2nd CPU: panic()->crash_kexec()->kexec_mutex already held by 1st CPU ->smp_send_stop()-> stop 1st CPU (stop kdump) This patch fixes the problem by introducing a spinlock in panic that allows only one CPU to process crash_kexec() and the subsequent panic code. All other CPUs call the weak function panic_smp_self_stop() that stops the CPU itself. This function can be overloaded by architecture code. For example "tile" can use their lower-power "nap" instruction for that. Signed-off-by:Chris Metcalf <cmetcalf@tilera.com> Signed-off-by:
-
Michael Holzheu authored
Currently it is possible to set the crash_size via the sysfs /sys/kernel/kexec_crash_size even if no crash kernel memory has been defined with the "crashkernel" parameter. In this case "crashk_res" is not initialized and crashk_res.start = crashk_res.end = 0. Unfortunately resource_size(&crashk_res) returns 1 in this case. This breaks the s390 implementation of crash_(un)map_reserved_pages(). To fix the problem the correct "old_size" is now calculated in crash_shrink_memory(). "old_size is set to "0" if crashk_res is not initialized. With this change crash_shrink_memory() will do nothing, when "crashk_res" is not initialized. It will return "0" for "echo 0 > /sys/kernel/kexec_crash_size" and -EINVAL for "echo [not zero] > /sys/kernel/kexec_crash_size". In addition to that this patch also simplifies the "ret = -EINVAL" vs. "ret = 0" logic as suggested by Simon Horman. Signed-off-by:
Dave Young <dyoung@redhat.com> Reviewed-by:
Simon Horman <horms@verge.net.au> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
-
Michael Holzheu authored
When shrinking crashkernel memory using /sys/kernel/kexec_crash_size for the newly added memory no RAM resource is created at the moment. Example: $ cat /proc/iomem 00000000-bfffffff : System RAM 00000000-005b7ac3 : Kernel code 005b7ac4-009743bf : Kernel data 009bb000-00a85c33 : Kernel bss c0000000-cfffffff : Crash kernel d0000000-ffffffff : System RAM $ echo 0 > /sys/kernel/kexec_crash_size $ cat /proc/iomem 00000000-bfffffff : System RAM 00000000-005b7ac3 : Kernel code 005b7ac4-009743bf : Kernel data 009bb000-00a85c33 : Kernel bss <<-- here is System RAM missing d0000000-ffffffff : System RAM One result of this bug is that the memory chunk can never be set offline using memory hotplug. With this patch I insert a new "System RAM" resource for the released memory. Then the upper example looks like the following: $ echo 0 > /sys/kernel/kexec_crash_size $ cat /proc/iomem 00000000-bfffffff : System RAM 00000000-005b7ac3 : Kernel code 005b7ac4-009743bf : Kernel data 009bb000-00a85c33 : Kernel bss c0000000-cfffffff : System RAM <<-- new rescoure d0000000-ffffffff : System RAM And now I can set chunk c0000000-cfffffff offline. Signed-off-by: -
WANG Cong authored
KMSG_DUMP_KEXEC is useless because we already save kernel messages inside /proc/vmcore, and it is unsafe to allow modules to do other stuffs in a crash dump scenario. [akpm@linux-foundation.org: fix powerpc build] Signed-off-by:
Vivek Goyal <vgoyal@redhat.com> Acked-by:
Jarod Wilson <jarod@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by:
-
Wanlong Gao authored
node_to_cpumask() has been replaced by cpumask_of_node(), and wholly removed since commit 29c337a0 ("cpumask: remove obsolete node_to_cpumask now everyone uses cpumask_of_node"). So update the comments for setup_node_to_cpumask_map(). Signed-off-by:
Wanlong Gao <gaowanlong@cn.fujitsu.com> Acked-by:
Rusty Russell <rusty@rustcorp.com.au> Signed-off-by:
-
Kautuk Consul authored
If either of the vas or vms arrays are not properly kzalloced, then the code jumps to the err_free label. The err_free label runs a loop to check and free each of the array members of the vas and vms arrays which is not required for this situation as none of the array members have been allocated till this point. Eliminate the extra loop we have to go through by introducing a new label err_free2 and then jumping to it. [akpm@linux-foundation.org: remove now-unneeded tests] Signed-off-by:
Kautuk Consul <consul.kautuk@gmail.com> Acked-by:
David Rientjes <rientjes@google.com> Signed-off-by:
-
Hugh Dickins authored
There is sometimes confusion between the global putback_lru_pages() in migrate.c and the static putback_lru_pages() in vmscan.c: rename the latter putback_inactive_pages(): it helps shrink_inactive_list() rather as move_active_pages_to_lru() helps shrink_active_list(). Remove unused scan_control arg from putback_inactive_pages() and from update_isolated_counts(). Move clear_active_flags() inside update_isolated_counts(). Move NR_ISOLATED accounting up into shrink_inactive_list() itself, so the balance is clearer. Do the spin_lock_irq() before calling putback_inactive_pages() and spin_unlock_irq() after return from it, so that it better matches update_isolated_counts() and move_active_pages_to_lru(). Signed-off-by:
-
Hugh Dickins authored
The isolate_pages() level in vmscan.c offers little but indirection: merge it into isolate_lru_pages() as the compiler does, and use the names nr_to_scan and nr_scanned in each case. Signed-off-by:
KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by:
-
Hugh Dickins authored
del_page_from_lru() repeats del_page_from_lru_list(), also working out which LRU the page was on, clearing the relevant bits. Decouple those functions: remove del_page_from_lru() and add page_off_lru(). Signed-off-by:
-
Hugh Dickins authored
Mostly we use "enum lru_list lru": change those few "l"s to "lru"s. Signed-off-by:
-
Hugh Dickins authored
checkpatch rightly protests WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable so fix the five offenders in mm/swap.c. Signed-off-by:
-
Hugh Dickins authored
What's so special about ____pagevec_lru_add() that it needs four leading underscores? Nothing, it just helped to distinguish from __pagevec_lru_add() in 2.6.28 development. Cut two leading underscores. Signed-off-by:
-
Hugh Dickins authored
Replace pagevecs in putback_lru_pages() and move_active_pages_to_lru() by lists of pages_to_free: then apply Konstantin Khlebnikov's free_hot_cold_page_list() to them instead of pagevec_release(). Which simplifies the flow (no need to drop and retake lock whenever pagevec fills up) and reduces stale addresses in stack backtraces (which often showed through the pagevecs); but more importantly, removes another 120 bytes from the deepest stacks in page reclaim. Although I've not recently seen an actual stack overflow here with a vanilla kernel, move_active_pages_to_lru() has often featured in deep backtraces. However, free_hot_cold_page_list() does not handle compound pages (nor need it: a Transparent HugePage would have been split by the time it reaches the call in shrink_page_list()), but it is possible for putback_lru_pages() or move_active_pages_to_lru() to be left holding the last reference on a THP, so must exclude the unlikely compound case before putting on pages_to_free. Remove pagevec_strip(), its work now done in move_active_pages_to_lru(). The pagevec in scan_mapping_unevictable_pages() remains in mm/vmscan.c, but that is never on the reclaim path, and cannot be replaced by a list. Signed-off-by:
Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Mel Gorman <mel@csn.ul.ie> Signed-off-by:
-
Hugh Dickins authored
If DEBUG_VM, mem_cgroup_print_bad_page() is called whenever bad_page() shows a "Bad page state" message, removes page from circulation, adds a taint and continues. This is at a very low level, often when a spinlock is held (sometimes when page table lock is held, for example). We want to recover from this badness, not make it worse: we must not kmalloc memory here, we must not do a cgroup path lookup via dubious pointers. No doubt that code was useful to debug a particular case at one time, and may be again, but take it out of the mainline kernel. Signed-off-by:
-
