Function to_mediatek_gpio can directly return without declaring
anything else in its body improving readability. Also change
pointer '*' declaration to be with return type in the upper line.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This commit update documentation for #interrupt-cells property in
the gpio node which has been changed from '1' to '2'.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Most gpio chips have two cells for interrupts and this should be also.
Set this property in the device tree accordly fixing this up. In order
to make this working properly the xlate function for the irq_domain must
be updated to use the  'irq_domain_xlate_twocell' one in the driver.
One more minimal change is needed two refer gpio's interrupt-parent from
other nodes which is to add new 'gpio' label in the device tree.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This commit reviews and complete documentation for gpio related stuff
in the mt7621 device. It should be complete now.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

In order to let other devices reference the GPIO interrupts
if necessary properties 'interrupt-controller' and
'#interrupt-cells' becomes necessary. Add both of them to
complete gpio device tree node.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Functions mediatek_gpio_irq_umask mediatek_gpio_irq_unmask are
reading and modifying registers but only the write is being hold.
It should be a complete lock instead for those which are type of
"read-modify-write". This makes more sense.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mediatek_gpio_get_direction function is holding across a simple read
which it seems to be not neccessary at all. Just remove this locking
cleaning code of this function a bit.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

BIT macro is being used to get mask for gpio's pin
which is retrieved using 'hwirq' from struct irq_data.
The problem here is that 'hwirq' can be as large as 95,
and 1UL << 95 is unlikely to work well. Instead of using
BIT macro use a new PIN_MASK macro which takes into account
pin and WIDTH of the bank in order to make a proper mask for
the gpio pin. Also 'd->hwirq' has been replaced by 'pin' in
some places because there was a 'pin' variable in changed
functions with the proper value. This improves readability.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The driver's init function don't do anything besides registering the platform
driver, and the exit function which is not included in the driver should only
do driver unregister. Because of this module_platform_driver() macro could
just be used instead of having separate functions.

Currently the macro is not being used because the driver is initialized at
subsys init call level but this isn't necessary since platform devices are
defined in the DT as dependencies so there's no need for init calls order.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There are 3 banks of gpios numbered '0' and '1' and '2'. So
the maximum bank number is "2". "3" is the count of banks.
In order to make the code looks and be correct on checking
max allowed gpio's id it makes sense to change the name of
this definition. Also there is another definitions which
start with the same prefix MKK_BANK_ of the new name so
having those with the same prefix makes all preprocessor
structure to be the same. This improves readability.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch fixes checkpatch.pl warning and check:
WARNING: line over 80 characters
CHECK: Alignment should match open parenthesis
Signed-off-by: Sankalp Negi <sankalpnegi2310@gmail.com>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Two switch statements had wrong indentation of 'case' options
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Correct the coding style of parenthesis and braces in various code blocks
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There were numerous coding syle errors in this file where spaces were required
around operators.
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

It was just a dumb wrapper around debugfs_remove_recursive() so just
call the function properly.  Also, there is no need to set the dentry to
NULL, it's gone, who cares about it anymore...

Cc: Oleg Drokin <oleg.drokin@intel.com>
Cc: Andreas Dilger <andreas.dilger@intel.com>
Cc: James Simmons <jsimmons@infradead.org>
Cc: NeilBrown <neilb@suse.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Roman Storozhenko <romeusmeister@gmail.com>
Cc: Aastha Gupta <aastha.gupta4104@gmail.com>
Cc: Ben Evans <bevans@cray.com>
Cc: Quentin Bouget <quentin.bouget@cea.fr>
Cc: Arvind Yadav <arvind.yadav.cs@gmail.com>
Cc: Arushi Singhal <arushisinghal19971997@gmail.com>
Cc: Patrick Farrell <paf@cray.com>
Cc: Aliaksei Karaliou <akaraliou.dev@gmail.com>
Cc: Mathias Rav <mathiasrav@gmail.com>
Cc: Andriy Skulysh <andriy.skulysh@seagate.com>
Cc: Dafna Hirschfeld <dafna3@gmail.com>
Cc: "Gustavo A. R. Silva" <garsilva@embeddedor.com>
Cc: Bob Glosman <bob.glossman@intel.com>
Cc: lustre-devel@lists.lustre.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The call to ldebugfs_add_vars() can not really fail, so have it just
return nothing, which allows us to clean up a lot of unused error
handling code.

Cc: Oleg Drokin <oleg.drokin@intel.com>
Cc: Andreas Dilger <andreas.dilger@intel.com>
Cc: James Simmons <jsimmons@infradead.org>
Cc: NeilBrown <neilb@suse.com>
Cc: Roman Storozhenko <romeusmeister@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Quentin Bouget <quentin.bouget@cea.fr>
Cc: Aastha Gupta <aastha.gupta4104@gmail.com>
Cc: Ben Evans <bevans@cray.com>
Cc: Arvind Yadav <arvind.yadav.cs@gmail.com>
Cc: Arushi Singhal <arushisinghal19971997@gmail.com>
Cc: Frank Zago <fzago@cray.com>
Cc: Patrick Farrell <paf@cray.com>
Cc: Simo Koskinen <koskisoft@gmail.com>
Cc: Andriy Skulysh <andriy.skulysh@seagate.com>
Cc: "John L. Hammond" <john.hammond@intel.com>
Cc: Mathias Rav <mathiasrav@gmail.com>
Cc: Dafna Hirschfeld <dafna3@gmail.com>
Cc: "Gustavo A. R. Silva" <garsilva@embeddedor.com>
Cc: lustre-devel@lists.lustre.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ldebugfs_register() is just a call to debugfs_create_dir() and
ldebugfs_add_vars() if the list option is set.  Fix up the last two
users of this function to just call these two functions instead, and
delete the now unused ldebugfs_register() call.

This ends up cleaning up more code and making things smaller, always a
good thing.

Cc: Oleg Drokin <oleg.drokin@intel.com>
Cc: Andreas Dilger <andreas.dilger@intel.com>
Cc: James Simmons <jsimmons@infradead.org>
Cc: NeilBrown <neilb@suse.com>
Cc: Ben Evans <bevans@cray.com>
Cc: Quentin Bouget <quentin.bouget@cea.fr>
Cc: Arvind Yadav <arvind.yadav.cs@gmail.com>
Cc: Arushi Singhal <arushisinghal19971997@gmail.com>
Cc: Julia Lawall <julia.lawall@lip6.fr>
Cc: Mathias Rav <mathiasrav@gmail.com>
Cc: Dafna Hirschfeld <dafna3@gmail.com>
Cc: "Gustavo A. R. Silva" <garsilva@embeddedor.com>
Cc: Patrick Farrell <paf@cray.com>
Cc: Nadav Amit <namit@vmware.com>
Cc: lustre-devel@lists.lustre.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

When the third option (list) to ldebugfs_register() is NULL, it's the
same as just calling debugfs_create_dir().  So unwind this and call
debugfs_create_dir() directly.

This ends up saving lots of code as we do not need to do any error
checking of the return value (because it does not matter).

The ldebugfs_register() call will be removed in a later patch when it is
fully removed, right now there are 2 outstanding users of it in the
tree.

Cc: Oleg Drokin <oleg.drokin@intel.com>
Cc: Andreas Dilger <andreas.dilger@intel.com>
Cc: James Simmons <jsimmons@infradead.org>
Cc: NeilBrown <neilb@suse.com>
Cc: Aastha Gupta <aastha.gupta4104@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Quentin Bouget <quentin.bouget@cea.fr>
Cc: Patrick Farrell <paf@cray.com>
Cc: Aliaksei Karaliou <akaraliou.dev@gmail.com>
Cc: "John L. Hammond" <john.hammond@intel.com>
Cc: Mathias Rav <mathiasrav@gmail.com>
Cc: Andriy Skulysh <andriy.skulysh@seagate.com>
Cc: Ben Evans <bevans@cray.com>
Cc: Bob Glosman <bob.glossman@intel.com>
Cc: lustre-devel@lists.lustre.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

It was just calling debugfs_create_file() so unwind things and just call
the real function instead.  This ends up saving a number of lines as
there was never any error handling happening anyway, so that all can be
removed as well.

Cc: Oleg Drokin <oleg.drokin@intel.com>
Cc: Andreas Dilger <andreas.dilger@intel.com>
Cc: James Simmons <jsimmons@infradead.org>
Cc: Quentin Bouget <quentin.bouget@cea.fr>
Cc: Ben Evans <bevans@cray.com>
Cc: NeilBrown <neilb@suse.com>
Cc: Arushi Singhal <arushisinghal19971997@gmail.com>
Cc: Arvind Yadav <arvind.yadav.cs@gmail.com>
Cc: Julia Lawall <julia.lawall@lip6.fr>
Cc: Dafna Hirschfeld <dafna3@gmail.com>
Cc: Mathias Rav <mathiasrav@gmail.com>
Cc: "Gustavo A. R. Silva" <garsilva@embeddedor.com>
Cc: Roman Storozhenko <romeusmeister@gmail.com>
Cc: lustre-devel@lists.lustre.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

It was just calling debugfs_create_file() so unwind things and just call
the real function instead.  This ends up saving a number of lines as
there was never any error handling happening anyway, so that all can be
removed as well.

Cc: Oleg Drokin <oleg.drokin@intel.com>
Cc: Andreas Dilger <andreas.dilger@intel.com>
Cc: James Simmons <jsimmons@infradead.org>
Cc: Quentin Bouget <quentin.bouget@cea.fr>
Cc: NeilBrown <neilb@suse.com>
Cc: Ben Evans <bevans@cray.com>
Cc: Arushi Singhal <arushisinghal19971997@gmail.com>
Cc: Arvind Yadav <arvind.yadav.cs@gmail.com>
Cc: "John L. Hammond" <john.hammond@intel.com>
Cc: Vitaly Fertman <vitaly.fertman@seagate.com>
Cc: Julia Lawall <julia.lawall@lip6.fr>
Cc: Dafna Hirschfeld <dafna3@gmail.com>
Cc: Mathias Rav <mathiasrav@gmail.com>
Cc: "Gustavo A. R. Silva" <garsilva@embeddedor.com>
Cc: Bob Glosman <bob.glossman@intel.com>
Cc: lustre-devel@lists.lustre.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

It was just calling debugfs_create_file() so unwind things and just call
the real function instead.  This ends up saving a number of lines as
there was never any error handling happening anyway, so that all can be
removed as well.

Cc: Oleg Drokin <oleg.drokin@intel.com>
Cc: Andreas Dilger <andreas.dilger@intel.com>
Cc: James Simmons <jsimmons@infradead.org>
Cc: Ben Evans <bevans@cray.com>
Cc: Quentin Bouget <quentin.bouget@cea.fr>
Cc: NeilBrown <neilb@suse.com>
Cc: Arushi Singhal <arushisinghal19971997@gmail.com>
Cc: Arvind Yadav <arvind.yadav.cs@gmail.com>
Cc: Patrick Farrell <paf@cray.com>
Cc: Aliaksei Karaliou <akaraliou.dev@gmail.com>
Cc: Aastha Gupta <aastha.gupta4104@gmail.com>
Cc: Dafna Hirschfeld <dafna3@gmail.com>
Cc: Mathias Rav <mathiasrav@gmail.com>
Cc: "Gustavo A. R. Silva" <garsilva@embeddedor.com>
Cc: Bob Glosman <bob.glossman@intel.com>
Cc: lustre-devel@lists.lustre.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

It was only being called in one place, and is an unneeded wrapper
function around debugfs_create_file() so just call the real debugfs
function instead.  This ends up cleaning up some unneeded error handling
logic that was never needed as well.

Cc: Oleg Drokin <oleg.drokin@intel.com>
Cc: Andreas Dilger <andreas.dilger@intel.com>
Cc: James Simmons <jsimmons@infradead.org>
Cc: Quentin Bouget <quentin.bouget@cea.fr>
Cc: Ben Evans <bevans@cray.com>
Cc: NeilBrown <neilb@suse.com>
Cc: Arvind Yadav <arvind.yadav.cs@gmail.com>
Cc: Arushi Singhal <arushisinghal19971997@gmail.com>
Cc: Dafna Hirschfeld <dafna3@gmail.com>
Cc: Mathias Rav <mathiasrav@gmail.com>
Cc: "Gustavo A. R. Silva" <garsilva@embeddedor.com>
Cc: lustre-devel@lists.lustre.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

When calling debugfs functions, there is no need to ever check the
return value.  The function can work or not, but the code logic should
never do something different based on this.

Clean up the lustre core code by not caring about the value of debugfs
calls.  This ends up removing a number of lines of code that are not
needed.

Note, more work is needed to remove the unneeded debugfs wrapper
functions in the future.

Cc: Oleg Drokin <oleg.drokin@intel.com>
Cc: Andreas Dilger <andreas.dilger@intel.com>
Cc: James Simmons <jsimmons@infradead.org>
Cc: NeilBrown <neilb@suse.com>
Cc: Ben Evans <bevans@cray.com>
Cc: Arvind Yadav <arvind.yadav.cs@gmail.com>
Cc: "John L. Hammond" <john.hammond@intel.com>
Cc: Dafna Hirschfeld <dafna3@gmail.com>
Cc: Mathias Rav <mathiasrav@gmail.com>
Cc: "Gustavo A. R. Silva" <garsilva@embeddedor.com>
Cc: lustre-devel@lists.lustre.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

When calling debugfs functions, there is no need to ever check the
return value.  The function can work or not, but the code logic should
never do something different based on this.

Clean up the visornic driver code by not caring about the value of
debugfs calls.  This ends up removing a number of lines of code that are
not needed.

Cc: David Kershner <david.kershner@unisys.com>
Cc: Tim Sell <timothy.sell@unisys.com>
Cc: David Binder <david.binder@unisys.com>
Cc: Sameer Wadgaonkar <sameer.wadgaonkar@unisys.com>
Cc: Charles Daniels <cdaniels@fastmail.com>
Cc: sparmaintainer@unisys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

We never did anything with the return value, and it does not matter if
the call succeeds or not (it's just debugging code), so don't even check
it.

Cc: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Ping-Ke Shih <pkshih@realtek.com>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: "Frank A. Cancio Bello" <frank@generalsoftwareinc.com>
Cc: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

When calling debugfs functions, there is no need to ever check the
return value.  The function can work or not, but the code logic should
never do something different based on this.

Clean up the greybus camera driver by not caring about the value of
debugfs calls.  This ends up removing a number of lines of code that
are not needed.

Cc: Alex Elder <elder@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: greybus-dev@lists.linaro.org
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch is created to solve the CamelCase issue. The members 'IEs'
and 'IELength' of struct wlan_bssid_ex are being modified to 'ie' and
'ie_length' to solve the issue. And the places where these variables
are referenced inside rtl8188eu driver are also changed.
Signed-off-by: Janani Sankara Babu <jananis37@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Something in recent linux-next kernels caused linux/highmem.h to
no longer be included implicitly from o2iblnd_cb.c, causing a build
failure:

drivers/staging/lustre/lnet/klnds/o2iblnd/o2iblnd_cb.c: In function 'kiblnd_kvaddr_to_page':
drivers/staging/lustre/lnet/klnds/o2iblnd/o2iblnd_cb.c:549:15: error: 'PKMAP_BASE' undeclared (first use in this function); did you mean 'RTM_BASE'?
  if (vaddr >= PKMAP_BASE &&
               ^~~~~~~~~~
               RTM_BASE
drivers/staging/lustre/lnet/klnds/o2iblnd/o2iblnd_cb.c:549:15: note: each undeclared identifier is reported only once for each function it appears in
drivers/staging/lustre/lnet/klnds/o2iblnd/o2iblnd_cb.c:550:28: error: 'LAST_PKMAP' undeclared (first use in this function); did you mean 'AT_HWCAP'?
      vaddr < (PKMAP_BASE + LAST_PKMAP * PAGE_SIZE)) {
                            ^~~~~~~~~~
                            AT_HWCAP

This adds back an explicit include for the header.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: NeilBrown <neilb@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

SPDX License Identifier is added in form of a comment.
Signed-off-by: Bhanusree Pola <bhanusreemahesh@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch fixes the checkpatch.pl warning:

WARNING: line over 80 characters
Signed-off-by: Sankalp Negi <sankalpnegi2310@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

single_open() returns -ENOMEM when malloc failed, so the caller function
rtl_debugfs_open_rw() should not always return 0. In addition, when using
single_open(), we should use single_release() instead of seq_release() in
the file_operations structure to avoid a memory leak.
Signed-off-by: Tiezhu Yang <kernelpatch@126.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

A number of extern struct declarations in p80211types.h were causing
checkpatch warnings: "extern prototypes should be avoided in .h files"
and "function definition argument 'xxxxxx' should also have an
identifier name".

This appears to be a result of using a macro to form the declarations
and checkpatch consequently misinterpreting the declarations as
function prototypes.

On checking, the declarations have no corresponding definition in the
driver and are not used, so they are removed along with the macro used
to construct them, which is not needed elsewhere. After this change,
checkpatch reports that p80211types.h has no obvious issues.
Signed-off-by: Tim Collier <osdevtc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The refill operation of the xattr cache does not know the
reply size in advance, so it makes a guess based on
the maxeasize value returned by the MDS.

In practice, it allocates 16 KiB for the common case and
4 MiB for the large xattr case. However, a typical reply
is just a few hundred bytes.

If we follow the conservative approach, we can prepare a
single memory page for the reply. It is large enough for
any reasonable xattr set and, at the same time, it does
not require multiple page memory reclaim, which can be
costly.

If, for a specific file, the reply is larger than a single
page, the client is prepared to handle that and will fall back
to non-cached xattr code. Indeed, if this happens often and
xattrs are often used to store large values, it makes sense to
disable the xattr cache at all since it wasn't designed for
such [mis]use.
Signed-off-by: Andrew Perepechko <c17827@cray.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-9417
Reviewed-on: https://review.whamcloud.com/26887Reviewed-by: Fan Yong <fan.yong@intel.com>
Reviewed-by: Ben Evans <bevans@cray.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Originally, the limitation of ACL entries is 32, that is not
enough for some use cases. In fact, restricting ACL entries
count is mainly for preparing the RPC reply buffer to receive
the ACL data. So we cannot make the ACL entries count to be
unlimited. But we can enlarge the RPC reply buffer to hold
more ACL entries. On the other hand, MDT backend filesystem
has its own EA size limitation. For example, for ldiskfs case,
if large EA enable, then the max ACL size is 1048492 bytes;
otherwise, it is 4012 bytes. For ZFS backend, such value is
32768 bytes. With such hard limitation, we can calculate how
many ACL entries we can have at most. This patch increases
the RPC reply buffer to match such hard limitation. For old
client, to avoid buffer overflow because of large ACL data
(more than 32 ACL entries), the MDT will forbid the old client
to access the file with large ACL data. As for how to know
whether it is old client or new, a new connection flag
OBD_CONNECT_LARGE_ACL is used for that.
Signed-off-by: Fan Yong <fan.yong@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-7473
Reviewed-on: https://review.whamcloud.com/19790Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Li Xi <lixi@ddn.com>
Reviewed-by: Lai Siyao <lai.siyao@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

md_getxattr() and md_setxattr() each have several unused
parameters. Remove them and improve the naming or remaining
parameters.
Signed-off-by: John L. Hammond <john.hammond@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-10792
Reviewed-on: https://review.whamcloud.com/Reviewed-by: Dmitry Eremin <dmitry.eremin@intel.com>
Reviewed-by: James Simmons <uja.ornl@yahoo.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux kernel v3.14 adds set_acl method to inode operations.
This patch adds support to Lustre for proper acl management.
Signed-off-by: Dmitry Eremin <dmitry.eremin@intel.com>
Signed-off-by: John L. Hammond <john.hammond@intel.com>
Signed-off-by: James Simmons <uja.ornl@yahoo.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-9183
Reviewed-on: https://review.whamcloud.com/25965
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-10541
Reviewed-on: https://review.whamcloud.com/31588
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-10926
Reviewed-on: https://review.whamcloud.com/32045Reviewed-by: Bob Glossman <bob.glossman@intel.com>
Reviewed-by: James Simmons <uja.ornl@yahoo.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Dmitry Eremin <dmitry.eremin@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Move ll_get_acl() to its own file acl.c just like all the other
linux file systems do.

Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6142Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

And we need even more .h files to be included to build this file.  So
add kernel.h and module.h, and hopefully that's enough...
Reported-by: kbuild test robot <lkp@intel.com>
Fixes: 0922c008 ("staging: lustre: remove libcfs_all from ptlrpc")
Cc: NeilBrown <neilb@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Turns out we need some more .h files to build properly on all arches.
Specifically errno.h for this file.
Reported-by: kbuild test robot <lkp@intel.com>
Fixes: 0922c008 ("staging: lustre: remove libcfs_all from ptlrpc")
Cc: NeilBrown <neilb@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Turns out we need some more .h files to build properly on all arches.
Specifically prefetch.h for this file.
Reported-by: kbuild test robot <lkp@intel.com>
Fixes: 73d65c8d ("staging: lustre: remove libcfs_all.h from lustre/include/*.h")
Cc: NeilBrown <neilb@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>