The value parameter is a single byte, so duplicate it to the 8 byte
range that is used as the pattern.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Cc: Sinan Kaya <okaya@kernel.org>
Link: https://lore.kernel.org/r/20220301182551.883474-5-benjamin.walker@intel.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

The value passed in to .prep_dma_memset is to be treated as a single
byte repeating pattern.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Cc: Ludovic Desroches <ludovic.desroches@microchip.com>
Cc: Tudor Ambarus <tudor.ambarus@microchip.com>
Link: https://lore.kernel.org/r/20220301182551.883474-4-benjamin.walker@intel.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

The value passed in to .prep_dma_memset is to be treated as a single
byte repeating pattern.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Cc: Ludovic Desroches <ludovic.desroches@microchip.com>
Cc: Tudor Ambarus <tudor.ambarus@microchip.com>
Link: https://lore.kernel.org/r/20220301182551.883474-3-benjamin.walker@intel.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Document this function to make clear the expected behavior of the
'value' parameter. It was intended to match the behavior of POSIX memset
as laid out here:

https://lore.kernel.org/dmaengine/YejrA5ZWZ3lTRO%2F1@matsya/Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Link: https://lore.kernel.org/r/20220301182551.883474-2-benjamin.walker@intel.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Move the calling of request_irq() and other related irq setup code until
after the WQ is successfully enabled. This reduces the amount of
setup/teardown if the wq is not configured correctly and cannot be enabled.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/164642777730.179702.1880317757087484299.stgit@djiang5-desk3.ch.intel.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Eliminate the follow versioncheck warning:

./drivers/dma/tegra186-gpc-dma.c: 21 linux/version.h not needed.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220413083842.69845-1-jiapeng.chong@linux.alibaba.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Looks like I forgot to add DMA_INTERRUPT cap setting to the idxd driver and
dmatest is still working regardless of this mistake. Add an explicit check
of DMA_INTERRUPT capability for dmatest to make sure the DMA device being used
actually supports interrupt before the test is launched and also that the
driver is programmed correctly.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/164978679251.2361020.5856734256126725993.stgit@djiang5-desk3.ch.intel.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

This fixes the following sparse warnings:
drivers/dma/mediatek/mtk-hsdma.c:604:26: warning: Using plain integer
as NULL pointer
Signed-off-by: Haowen Bai <baihaowen@meizu.com>
Link: https://lore.kernel.org/r/1649750340-30777-1-git-send-email-baihaowen@meizu.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Unneeded variable: "retval". Return "NULL" , so we have to make code clear.
better way, drop the function.
Signed-off-by: Haowen Bai <baihaowen@meizu.com>
Link: https://lore.kernel.org/r/1649726180-13133-1-git-send-email-baihaowen@meizu.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Load the max_xfer_size and max_batch_size values from the values read from
registers to the shadow variables. This will allow the read-only device to
display the correct values for the sysfs attributes.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/164971507673.2201761.11244446608988838897.stgit@djiang5-desk3.ch.intel.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Even though idxd driver has always supported interrupt, it never actually
set the DMA_INTERRUPT cap bit. Rectify this mistake so the interrupt
capability is advertised.
Reported-by: Ben Walker <benjamin.walker@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/164971497859.2201379.17925303210723708961.stgit@djiang5-desk3.ch.intel.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Set the maximum segment size, since the hardware can do transfers larger
than the default 64 KiB returned by dma_get_max_seg_size().

The maximum segment size is limited by the 24-bit transfer count field
in DMA descriptors. The number of bytes is equal to the transfer count
times the transfer size unit, which is selected by the driver based on
the DMA buffer address and length of the transfer. The size unit can be
as small as 1 byte, so set the maximum segment size to 2^24-1 bytes to
ensure the transfer count will not overflow regardless of the size unit
selected by the driver.
Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
Link: https://lore.kernel.org/r/20220411153618.49876-1-aidanmacdonald.0x0@gmail.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

If the DMA_PREP_INTERRUPT flag is not provided, run in polled mode,
which significantly improves IOPS: more than twice on chunks < 4K.
Signed-off-by: Ilya Novikov <i.m.novikov@yadro.com>
Link: https://lore.kernel.org/r/20220413113733.59041-1-i.m.novikov@yadro.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Document the compatible for GPI DMA controller on SC7280 SoC
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220414064216.1182177-1-vkoul@kernel.orgSigned-off-by: Vinod Koul <vkoul@kernel.org>

It is unnecessary to call spin_lock_bh() if you are already in a tasklet.
Signed-off-by: Yunbo Yu <yuyunbo519@gmail.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Link: https://lore.kernel.org/r/20220418142021.1241558-1-yuyunbo519@gmail.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

MCDMA IP provides up to 16 multiple channels of data movement each on
MM2S and S2MM paths. Inline with implementation, in the binding add
description for the channel ID start index and mention that it's fixed
irrespective of the MCDMA IP configuration(number of read/write channels).
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/1649939061-6675-1-git-send-email-radhey.shyam.pandey@xilinx.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

The Qualcomm SM8350 platform does, like the SM8450, provide a set of GPI
controllers with an ee-offset of 0x10000. Add this to the driver.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220412212959.2385085-1-bjorn.andersson@linaro.orgSigned-off-by: Vinod Koul <vkoul@kernel.org>

Controller on newer SoCs like SM8450 have registers at at offset. Add
ee_offset to driver_data and add this compatible for the driver.
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220406132508.1029348-3-vkoul@kernel.orgSigned-off-by: Vinod Koul <vkoul@kernel.org>

Add the compatible for newer qcom socs with gpi dma i.e qcom sm8350 and
sm8450.
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220406132508.1029348-2-vkoul@kernel.orgSigned-off-by: Vinod Koul <vkoul@kernel.org>

Newer platforms seem to have strict requirement for TRE flags which
causes transaction to timeout. This was resolved to missing chain and
link flag for duplex spi transaction.

So add these two flags.
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220406132508.1029348-1-vkoul@kernel.orgSigned-off-by: Vinod Koul <vkoul@kernel.org>

According to lib/idr.c,
   The IDA handles its own locking.  It is safe to call any of the IDA
   functions without synchronisation in your code.

so the 'chan_mutex' mutex can just be removed.
It is here only to protect some ida_alloc()/ida_free() calls.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/7180452c1d77b039e27b6f9418e0e7d9dd33c431.1644140845.git.christophe.jaillet@wanadoo.frSigned-off-by: Vinod Koul <vkoul@kernel.org>

Add additional structure definitions for Intel In-memory Analytics
Accelerator (IAA/IAX). See specification (1) for more details.

1: https://cdrdv2.intel.com/v1/dl/getContent/721858Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/164704100212.1373038.18362680016033557757.stgit@djiang5-desk3.ch.intel.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Adding GPC DMA controller driver for Tegra. The driver supports dma
transfers between memory to memory, IO peripheral to memory and
memory to IO peripheral.
Co-developed-by: Pavan Kunapuli <pkunapuli@nvidia.com>
Signed-off-by: Pavan Kunapuli <pkunapuli@nvidia.com>
Co-developed-by: Rajesh Gumasta <rgumasta@nvidia.com>
Signed-off-by: Rajesh Gumasta <rgumasta@nvidia.com>
Signed-off-by: Akhil R <akhilrajeev@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20220225132044.14478-3-akhilrajeev@nvidia.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Add DT binding document for Nvidia Tegra GPCDMA controller.
Signed-off-by: Rajesh Gumasta <rgumasta@nvidia.com>
Signed-off-by: Akhil R <akhilrajeev@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20220225132044.14478-2-akhilrajeev@nvidia.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

This email should now be used to contact me.
Signed-off-by: Olivier Dautricourt <olivier.dautricourt@orolia.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/dc3decf1dae172c688017bd3ada2ad2b7d060c1e.1647539776.git.olivier.dautricourt@orolia.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

This email should now be used to contact me.
Signed-off-by: Olivier Dautricourt <olivier.dautricourt@orolia.com>
Link: https://lore.kernel.org/r/85c4174fa162bd946ccf3e08dcfc9b83cfe69b5c.1647539776.git.olivier.dautricourt@orolia.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Add string processing with strim() in order to remove trailing white spaces
that may be input by user for the wq->name.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/164789525123.2799661.13795829125221129132.stgit@djiang5-desk3.ch.intel.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

The current documentation for the residue reported in a cyclic transfer
case mentions that the reported residue should be relative to the current
period only. However the definition of DMA_RESIDUE_GRANULARITY_SEGMENT
specifies that the residue should be updated after each period for
a cyclic transfer, which is in direct contradiction.

Moreover the pcm_dmaengine common code uses the residue relative to
the whole cyclic buffer size, not one period.

Correct the residue-related documentation to reflect this.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Link: https://lore.kernel.org/r/20220331134114.703782-1-paul.kocialkowski@bootlin.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

STM32_MDMA_CCR bit[8] is used to enable Secure Mode (SM). If this bit is
set, it means that all the channel registers are write-protected. So the
channel is not available for Linux use.

Add stm32_mdma_filter_fn() callback filter and give it to
__dma_request_chan (instead of dma_get_any_slave_channel()), to exclude the
channel if it is marked Secure.
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Link: https://lore.kernel.org/r/20220330103645.99969-1-amelie.delaunay@foss.st.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

powerpc's asm/prom.h brings some headers that it doesn't
need itself.

In order to clean it up, first add missing headers in
users of asm/prom.h
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/f98acba303489bdf003e7256460696225b00702e.1648833428.git.christophe.leroy@csgroup.euSigned-off-by: Vinod Koul <vkoul@kernel.org>

Remove the second 'to' which is repeated.
Signed-off-by: jianchunfu <jianchunfu@cmss.chinamobile.com>
Link: https://lore.kernel.org/r/20220403123120.7794-1-jianchunfu@cmss.chinamobile.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

The driver currently programs the system pasid to the WQ preemptively when
system pasid is enabled. Given that a dwq will reprogram the pasid and
possibly a different pasid, the programming is not necessary. The pasid_en
bit can be set for swq as it does not need pasid programming but
needs the pasid_en bit. Remove system pasid programming on device config
write. Add pasid programming for kernel wq type on wq driver enable. The
char dev driver already reprograms the dwq on ->open() call so there's no
change.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/164935607115.1660372.6734518676950372366.stgit@djiang5-desk3.ch.intel.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static
allocation of IRQ resources in DT core code, this causes an issue
when using hierarchical interrupt domains using "interrupts" property
in the node as this bypasses the hierarchical setup and messes up the
irq chaining.

In preparation for removal of static setup of IRQ resource from DT core
code use platform_get_irq().
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220404155557.27316-4-prabhakar.mahadev-lad.rj@bp.renesas.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static
allocation of IRQ resources in DT core code, this causes an issue
when using hierarchical interrupt domains using "interrupts" property
in the node as this bypasses the hierarchical setup and messes up the
irq chaining.

In preparation for removal of static setup of IRQ resource from DT core
code use platform_get_irq().
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220404155557.27316-3-prabhakar.mahadev-lad.rj@bp.renesas.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static
allocation of IRQ resources in DT core code, this causes an issue
when using hierarchical interrupt domains using "interrupts" property
in the node as this bypasses the hierarchical setup and messes up the
irq chaining.

In preparation for removal of static setup of IRQ resource from DT core
code use platform_get_irq_optional().

There are no non-DT users for this driver so interrupt range
(irq_res->start-irq_res->end) is no longer required and with DT we will
be sure it will be a single IRQ resource for each index.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220404155557.27316-2-prabhakar.mahadev-lad.rj@bp.renesas.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

The DMAC block is identical on Renesas RZ/G2L, RZ/G2UL and RZ/V2L SoC's, so
instead of adding dependency for each SoC's add dependency on ARCH_RZG2L.
The ARCH_RZG2L config option is already selected by ARCH_R9A07G043,
ARCH_R9A07G044 and ARCH_R9A07G054.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20220406080417.14593-1-prabhakar.mahadev-lad.rj@bp.renesas.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

It currently assumes that there are always four channels, it would
cause the error if there is actually less than four channels. Change
that by getting number of channel from device tree.

For backwards-compatibility, it uses the default value (i.e. 4) when
there is no 'dma-channels' information in dts.
Signed-off-by: Zong Li <zong.li@sifive.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Link: https://lore.kernel.org/r/f08a95b6582a51712c5b2c3cb859136d07bfa8b9.1648461096.git.zong.li@sifive.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Add dma-channels property, then we can determine how many channels there
by device tree, rather than statically defining it in PDMA driver.
In addition, we also modify the compatible for PDMA versioning scheme.
Signed-off-by: Zong Li <zong.li@sifive.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Suggested-by: Palmer Dabbelt <palmer@rivosinc.com>
Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Link: https://lore.kernel.org/r/7cc9a7b5f7e6c28fc9eb172c441b5aed2159b8a0.1648461096.git.zong.li@sifive.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Pull more tracing updates from Steven Rostedt:

 - Rename the staging files to give them some meaning. Just
   stage1,stag2,etc, does not show what they are for

 - Check for NULL from allocation in bootconfig

 - Hold event mutex for dyn_event call in user events

 - Mark user events to broken (to work on the API)

 - Remove eBPF updates from user events

 - Remove user events from uapi header to keep it from being installed.

 - Move ftrace_graph_is_dead() into inline as it is called from hot
   paths and also convert it into a static branch.

* tag 'trace-v5.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing: Move user_events.h temporarily out of include/uapi
  ftrace: Make ftrace_graph_is_dead() a static branch
  tracing: Set user_events to BROKEN
  tracing/user_events: Remove eBPF interfaces
  tracing/user_events: Hold event_mutex during dyn_event_add
  proc: bootconfig: Add null pointer check
  tracing: Rename the staging files for trace_events