- 23 Jan, 2018 11 commits
-
-
Chuck Lever authored
Signed-off-by:
Chuck Lever <chuck.lever@oracle.com> Signed-off-by:
Anna Schumaker <Anna.Schumaker@Netapp.com>
-
Chuck Lever authored
Signed-off-by:
-
Chuck Lever authored
Signed-off-by:
-
Chuck Lever authored
Signed-off-by:
-
Chuck Lever authored
Signed-off-by:
-
Chuck Lever authored
This includes decoding Write and Reply chunks, and fixing up inline payloads. Signed-off-by:
-
Chuck Lever authored
Signed-off-by:
-
Chuck Lever authored
Signed-off-by:
-
Chuck Lever authored
Signed-off-by:
-
Chuck Lever authored
Signed-off-by:
-
Chuck Lever authored
These can be shared with all kernel ULPs, and more can easily be added as needed. Note: checkpatch.pl has some heartburn with the TRACE_DEFINE_ENUM macros and the LIST macros. These follow the same style as other header files under include/tracing/events , thus should be considered acceptable exceptions. Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
-
- 16 Jan, 2018 16 commits
-
-
Chuck Lever authored
Clean up: Code review suggested that a common bit of code can be placed into a helper function, and this gives us fewer places to stick an "I DMA unmapped something" trace point. Signed-off-by:
-
Chuck Lever authored
Clean up: struct rpcrdma_mw was named after Memory Windows, but xprtrdma no longer supports a Memory Window registration mode. Rename rpcrdma_mw and its fields to reduce confusion and make the code more sensible to read. Renaming "mw" was suggested by Tom Talpey, the author of the original xprtrdma implementation. It's a good idea, but I haven't done this until now because it's a huge diffstat for no benefit other than code readability. However, I'm about to introduce static trace points that expose a few of xprtrdma's internal data structures. They should make sense in the trace report, and it's reasonable to treat trace points as a kernel API contract which might be difficult to change later. While I'm churning things up, two additional changes: - rename variables unhelpfully called "r" to "mr", to improve code clarity, and - rename the MR-related helper functions using the form "rpcrdma_mr_<verb>", to be consistent with other areas of the code. Signed-off-by:
-
Chuck Lever authored
Clean up: Over time, the industry has adopted the term "frwr" instead of "frmr". The term "frwr" is now more widely recognized. For the past couple of years I've attempted to add new code using "frwr" , but there still remains plenty of older code that still uses "frmr". Replace all usage of "frmr" to avoid confusion. While we're churning code, rename variables unhelpfully called "f" to "frwr", to improve code clarity. Signed-off-by:
-
Chuck Lever authored
No need for the overhead of atomically setting and clearing this bit flag for every use of a pre-allocated backchannel rpc_rqst. These are a distinct pool of rpc_rqsts that are used only for callback operations, so it is safe to simply leave the bit set. Signed-off-by:
-
Chuck Lever authored
Clean up. @rqst is set up differently for backchannel Replies. For example, rqst->rq_task and task->tk_client are both NULL. So it is easier to understand and maintain this code path if it is separated. Also, we can get rid of the confusing rl_connect_cookie hack in rpcrdma_bc_receive_call. Signed-off-by:
-
Chuck Lever authored
Since commit 5a6d1db4 ("SUNRPC: Add a transport-specific private field in rpc_rqst"), the rpc_rqst's for RPC-over-RDMA backchannel operations leave rq_buffer set to NULL. xprt_release does not invoke ->op->buf_free when rq_buffer is NULL. The RPCRDMA_REQ_F_BACKCHANNEL check in xprt_rdma_free is therefore redundant because xprt_rdma_free is not invoked for backchannel requests. Signed-off-by:
-
Chuck Lever authored
Clean up. This logic is related to marshaling the request, and I'd like to keep everything that touches req->rl_registered close together, for CPU cache efficiency. Signed-off-by:
-
Chuck Lever authored
Clean up a harmless oversight. xprtrdma's ->set_port method has never properly supported IPv6. This issue has never been a problem because NFS/RDMA mounts have always required "port=20049", thus so far, rpcbind is not invoked for these mounts. Signed-off-by:
-
Chuck Lever authored
Save more space in struct rpcrdma_xprt by removing the redundant "addr" field from struct rpcrdma_create_data_internal. Wherever we have rpcrdma_xprt, we also have the rpc_xprt, which has a sockaddr_storage field with the same content. Signed-off-by:
-
Chuck Lever authored
This makes the address strings available for debugging messages in earlier stages of transport set up. The first benefit is to get rid of the single-use rep_remote_addr field, saving 128+ bytes in struct rpcrdma_ep. Signed-off-by:
-
Chuck Lever authored
Clean up. Remove fields that should have been removed by commit b3221d6a ("xprtrdma: Remove logic that constructs RDMA_MSGP type calls"). Signed-off-by:
-
Chuck Lever authored
Clean up. Commit b5f0afbe ("xprtrdma: Per-connection pad optimization") should have removed this. Signed-off-by:
-
Chuck Lever authored
Refactoring change: Remote Invalidation is particular to the memory registration mode that is use. Use a callout instead of a generic function to handle Remote Invalidation. This gets rid of the 8-byte flags field in struct rpcrdma_mw, of which only a single bit flag has been allocated. Signed-off-by:
-
Chuck Lever authored
The rpcrdma_req is not shared yet, and its associated Send hasn't been posted, thus RMW should be safe. There's no need for the expense of a lock cycle here. Fixes: 0ba6f370 ("xprtrdma: Refactor rpcrdma_deferred_completion") Signed-off-by:
-
Chuck Lever authored
The backchannel code uses rpcrdma_recv_buffer_put to add new reps to the free rep list. This also decrements rb_recv_count, which spoofs the receive overrun logic in rpcrdma_buffer_get_rep. Commit 9b06688b ("xprtrdma: Fix additional uses of spin_lock_irqsave(rb_lock)") replaced the original open-coded list_add with a call to rpcrdma_recv_buffer_put(), but then a year later, commit 05c97466 ("xprtrdma: Fix receive buffer accounting") added rep accounting to rpcrdma_recv_buffer_put. It was an oversight to let the backchannel continue to use this function. The fix this, let's combine the "add to free list" logic with rpcrdma_create_rep. Also, do not allocate RPCRDMA_MAX_BC_REQUESTS rpcrdma_reps in rpcrdma_buffer_create and then allocate additional rpcrdma_reps in rpcrdma_bc_setup_reps. Allocating the extra reps during backchannel set-up is sufficient. Fixes: 05c97466 ("xprtrdma: Fix receive buffer accounting") Signed-off-by:
-
Chuck Lever authored
This leak has been around forever, and is exceptionally rare. EINVAL causes mount to fail with "an incorrect mount option was specified" although it's not likely that one of the mount options is incorrect. Instead, return ENODEV in this case, as this appears to be an issue with system or device configuration rather than a specific mount option. Some obsolete comments are also removed. Signed-off-by:
-
- 18 Dec, 2017 1 commit
-
-
Linus Torvalds authored
-
- 17 Dec, 2017 12 commits
-
-
Kees Cook authored
This reverts commit 04e35f44. SELinux runs with secureexec for all non-"noatsecure" domain transitions, which means lots of processes end up hitting the stack hard-limit change that was introduced in order to fix a race with prlimit(). That race fix will need to be redesigned. Reported-by:
Laura Abbott <labbott@redhat.com> Reported-by:
Tomáš Trnka <trnka@scm.com> Cc: stable@vger.kernel.org Signed-off-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull Page Table Isolation (PTI) v4.14 backporting base tree from Ingo Molnar: "This tree contains the v4.14 PTI backport preparatory tree, which consists of four merges of upstream trees and 7 cherry-picked commits, which the upcoming PTI work depends on" NOTE! The resulting tree is exactly the same as the original base tree (ie the diff between this commit and its immediate first parent is empty). The only reason for this merge is literally to have a common point for the actual PTI changes so that the commits can be shared in both the 4.15 and 4.14 trees. * 'WIP.x86-pti.base-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mm/kasan: Don't use vmemmap_populate() to initialize shadow locking/barriers: Convert users of lockless_dereference() to READ_ONCE() locking/barriers: Add implicit smp_read_barrier_depends() to READ_ONCE() bpf: fix build issues on um due to mising bpf_perf_event.h perf/x86: Enable free running PEBS for REGS_USER/INTR x86: Make X86_BUG_FXSAVE_LEAK detectable in CPUID on AMD x86/cpufeature: Add User-Mode Instruction Prevention definitions
-
Linus Torvalds authored
Merge branch 'WIP.x86-pti.base.prep-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull Page Table Isolation (PTI) preparatory tree from Ingo Molnar: "This does a rename to free up linux/pti.h to be used by the upcoming page table isolation feature" * 'WIP.x86-pti.base.prep-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: drivers/misc/intel/pti: Rename the header file to free up the namespace
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull timer fix from Thomas Gleixner: "A single bugfix which prevents arbitrary sigev_notify values in posix-timers" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: posix-timer: Properly check sigevent->sigev_notify
-
git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds authored
Pull dmaengine fixes from Vinod Koul: "This time consisting of fixes in a bunch of drivers and the dmatest module: - Fix for disable clk on error path in fsl-edma driver - Disable clk fail fix in jz4740 driver - Fix long pending bug in dmatest driver for dangling pointer - Fix potential NULL pointer dereference in at_hdmac driver - Error handling path in ioat driver" * tag 'dmaengine-fix-4.15-rc4' of git://git.infradead.org/users/vkoul/slave-dma: dmaengine: fsl-edma: disable clks on all error paths dmaengine: jz4740: disable/unprepare clk if probe fails dmaengine: dmatest: move callback wait queue to thread context dmaengine: at_hdmac: fix potential NULL pointer dereference in atc_prep_dma_interleaved dmaengine: ioat: Fix error handling path
-
Arnd Bergmann authored
With CONFIG_MTD=m and CONFIG_CRAMFS=y, we now get a link failure: fs/cramfs/inode.o: In function `cramfs_mount': inode.c:(.text+0x220): undefined reference to `mount_mtd' fs/cramfs/inode.o: In function `cramfs_mtd_fill_super': inode.c:(.text+0x6d8): undefined reference to `mtd_point' inode.c:(.text+0xae4): undefined reference to `mtd_unpoint' This adds a more specific Kconfig dependency to avoid the broken configuration. Alternatively we could make CRAMFS itself depend on "MTD || !MTD" with a similar result. Fixes: 99c18ce5 ("cramfs: direct memory access support") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Nicolas Pitre <nico@linaro.org> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull vfs fixes from Al Viro: "The alloc_super() one is a regression in this merge window, lazytime thing is older..." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: VFS: Handle lazytime in do_mount() alloc_super(): do ->s_umount initialization earlier
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4Linus Torvalds authored
Pull ext4 fixes from Ted Ts'o: "Fix a regression which caused us to fail to interpret symlinks in very ancient ext3 file system images. Also fix two xfstests failures, one of which could cause an OOPS, plus an additional bug fix caught by fuzz testing" * tag 'ext4_for_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: fix crash when a directory's i_size is too small ext4: add missing error check in __ext4_new_inode() ext4: fix fdatasync(2) after fallocate(2) operation ext4: support fast symlinks from ext3 file systems
-
Andrey Ryabinin authored
[ Note, this is a Git cherry-pick of the following commit: d17a1d97: ("x86/mm/kasan: don't use vmemmap_populate() to initialize shadow") ... for easier x86 PTI code testing and back-porting. ] The KASAN shadow is currently mapped using vmemmap_populate() since that provides a semi-convenient way to map pages into init_top_pgt. However, since that no longer zeroes the mapped pages, it is not suitable for KASAN, which requires zeroed shadow memory. Add kasan_populate_shadow() interface and use it instead of vmemmap_populate(). Besides, this allows us to take advantage of gigantic pages and use them to populate the shadow, which should save us some memory wasted on page tables and reduce TLB pressure. Link: http://lkml.kernel.org/r/20171103185147.2688-2-pasha.tatashin@oracle.comSigned-off-by:Andrey Ryabinin <aryabinin@virtuozzo.com> Signed-off-by:
Pavel Tatashin <pasha.tatashin@oracle.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Steven Sistare <steven.sistare@oracle.com> Cc: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: Bob Picco <bob.picco@oracle.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Alexander Potapenko <glider@google.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: David S. Miller <davem@davemloft.net> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@kernel.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Ingo Molnar <mingo@kernel.org>
-
Will Deacon authored
[ Note, this is a Git cherry-pick of the following commit: 506458ef ("locking/barriers: Convert users of lockless_dereference() to READ_ONCE()") ... for easier x86 PTI code testing and back-porting. ] READ_ONCE() now has an implicit smp_read_barrier_depends() call, so it can be used instead of lockless_dereference() without any change in semantics. Signed-off-by:Will Deacon <will.deacon@arm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1508840570-22169-4-git-send-email-will.deacon@arm.comSigned-off-by:
-
Will Deacon authored
[ Note, this is a Git cherry-pick of the following commit: 76ebbe78 ("locking/barriers: Add implicit smp_read_barrier_depends() to READ_ONCE()") ... for easier x86 PTI code testing and back-porting. ] In preparation for the removal of lockless_dereference(), which is the same as READ_ONCE() on all architectures other than Alpha, add an implicit smp_read_barrier_depends() to READ_ONCE() so that it can be used to head dependency chains on all architectures. Signed-off-by: -
Daniel Borkmann authored
[ Note, this is a Git cherry-pick of the following commit: a23f06f0 ("bpf: fix build issues on um due to mising bpf_perf_event.h") ... for easier x86 PTI code testing and back-porting. ] Since c895f6f7 ("bpf: correct broken uapi for BPF_PROG_TYPE_PERF_EVENT program type") um (uml) won't build on i386 or x86_64: [...] CC init/main.o In file included from ../include/linux/perf_event.h:18:0, from ../include/linux/trace_events.h:10, from ../include/trace/syscall.h:7, from ../include/linux/syscalls.h:82, from ../init/main.c:20: ../include/uapi/linux/bpf_perf_event.h:11:32: fatal error: asm/bpf_perf_event.h: No such file or directory #include <asm/bpf_perf_event.h> [...] Lets add missing bpf_perf_event.h also to um arch. This seems to be the only one still missing. Fixes: c895f6f7 ("bpf: correct broken uapi for BPF_PROG_TYPE_PERF_EVENT program type") Reported-by:Randy Dunlap <rdunlap@infradead.org> Suggested-by:
Richard Weinberger <richard@sigma-star.at> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Tested-by:
Alexei Starovoitov <ast@kernel.org> Acked-by:
Richard Weinberger <richard@nod.at> Signed-off-by:
-
