- 25 Oct, 2022 31 commits
-
-
Paolo Abeni authored
Mat Martineau says: ==================== mptcp: Socket option updates Patches 1 and 3 refactor a recent socket option helper function for more generic use, and make use of it in a couple of places. Patch 2 adds TCP_FASTOPEN_NO_COOKIE functionality to MPTCP sockets, similar to TCP_FASTOPEN_CONNECT support recently added in v6.1 ==================== Link: https://lore.kernel.org/r/20221022004505.160988-1-mathew.j.martineau@linux.intel.comSigned-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Matthieu Baerts authored
mptcp_setsockopt_sol_tcp_defer() was doing the same thing as mptcp_setsockopt_first_sf_only() except for the returned code in case of error. Ignoring the error is needed to mimic how TCP_DEFER_ACCEPT is handled when used with "plain" TCP sockets. The specific function for TCP_DEFER_ACCEPT can be replaced by the new mptcp_setsockopt_first_sf_only() helper and errors can be ignored to stay compatible with TCP. A bit of cleanup. Suggested-by:
Mat Martineau <mathew.j.martineau@linux.intel.com> Reviewed-by:
Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by:
-
Matthieu Baerts authored
The goal of this socket option is to configure MPTCP + TFO without cookie per socket. It was already possible to enable TFO without a cookie per netns by setting net.ipv4.tcp_fastopen sysctl knob to the right value. Per route was also supported by setting 'fastopen_no_cookie' option. This patch adds a per socket support like it is possible to do with TCP thanks to TCP_FASTOPEN_NO_COOKIE socket option. The only thing to do here is to relay the request to the first subflow like it is already done for TCP_FASTOPEN_CONNECT. Reviewed-by:
-
Matthieu Baerts authored
There are other socket options that need to act only on the first subflow, e.g. all TCP_FASTOPEN* socket options. This is similar to the getsockopt version. In the next commit, this new mptcp_setsockopt_first_sf_only() helper is used by other another option. Reviewed-by:
-
Paolo Abeni authored
Kuniyuki Iwashima says: ==================== soreuseport: Fix broken SO_INCOMING_CPU. setsockopt(SO_INCOMING_CPU) for UDP/TCP is broken since 4.5/4.6 due to these commits: * e32ea7e7 ("soreuseport: fast reuseport UDP socket selection") * c125e80b ("soreuseport: fast reuseport TCP socket selection") These commits introduced the O(1) socket selection algorithm and removed O(n) iteration over the list, but it ignores the score calculated by compute_score(). As a result, it caused two misbehaviours: * Unconnected sockets receive packets sent to connected sockets * SO_INCOMING_CPU does not work The former is fixed by commit acdcecc6 ("udp: correct reuseport selection with connected sockets"). This series fixes the latter and adds some tests for SO_INCOMING_CPU. ==================== Link: https://lore.kernel.org/r/20221021204435.4259-1-kuniyu@amazon.comSigned-off-by:
-
Kuniyuki Iwashima authored
Some highly optimised applications use SO_INCOMING_CPU to make them efficient, but they didn't test if it's working correctly by getsockopt() to avoid slowing down. As a result, no one noticed it had been broken for years, so it's a good time to add a test to catch future regression. The test does 1) Create $(nproc) TCP listeners associated with each CPU. 2) Create 32 child sockets for each listener by calling sched_setaffinity() for each CPU. 3) Check if accept()ed sockets' sk_incoming_cpu matches listener's one. If we see -EAGAIN, SO_INCOMING_CPU is broken. However, we might not see any error even if broken; the kernel could miraculously distribute all SYN to correct listeners. Not to let that happen, we must increase the number of clients and CPUs to some extent, so the test requires $(nproc) >= 2 and creates 64 sockets at least. Test: $ nproc 96 $ ./so_incoming_cpu Before the previous patch: # Starting 12 tests from 5 test cases. # RUN so_incoming_cpu.before_reuseport.test1 ... # so_incoming_cpu.c:191:test1:Expected cpu (5) == i (0) # test1: Test terminated by assertion # FAIL so_incoming_cpu.before_reuseport.test1 not ok 1 so_incoming_cpu.before_reuseport.test1 ... # FAILED: 0 / 12 tests passed. # Totals: pass:0 fail:12 xfail:0 xpass:0 skip:0 error:0 After: # Starting 12 tests from 5 test cases. # RUN so_incoming_cpu.before_reuseport.test1 ... # so_incoming_cpu.c:199:test1:SO_INCOMING_CPU is very likely to be working correctly with 3072 sockets. # OK so_incoming_cpu.before_reuseport.test1 ok 1 so_incoming_cpu.before_reuseport.test1 ... # PASSED: 12 / 12 tests passed. # Totals: pass:12 fail:0 xfail:0 xpass:0 skip:0 error:0 Signed-off-by:Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by:
-
Kuniyuki Iwashima authored
Kazuho Oku reported that setsockopt(SO_INCOMING_CPU) does not work with setsockopt(SO_REUSEPORT) since v4.6. With the combination of SO_REUSEPORT and SO_INCOMING_CPU, we could build a highly efficient server application. setsockopt(SO_INCOMING_CPU) associates a CPU with a TCP listener or UDP socket, and then incoming packets processed on the CPU will likely be distributed to the socket. Technically, a socket could even receive packets handled on another CPU if no sockets in the reuseport group have the same CPU receiving the flow. The logic exists in compute_score() so that a socket will get a higher score if it has the same CPU with the flow. However, the score gets ignored after the blamed two commits, which introduced a faster socket selection algorithm for SO_REUSEPORT. This patch introduces a counter of sockets with SO_INCOMING_CPU in a reuseport group to check if we should iterate all sockets to find a proper one. We increment the counter when * calling listen() if the socket has SO_INCOMING_CPU and SO_REUSEPORT * enabling SO_INCOMING_CPU if the socket is in a reuseport group Also, we decrement it when * detaching a socket out of the group to apply SO_INCOMING_CPU to migrated TCP requests * disabling SO_INCOMING_CPU if the socket is in a reuseport group When the counter reaches 0, we can get back to the O(1) selection algorithm. The overall changes are negligible for the non-SO_INCOMING_CPU case, and the only notable thing is that we have to update sk_incomnig_cpu under reuseport_lock. Otherwise, the race prevents transitioning to the O(n) algorithm and results in the wrong socket selection. cpu1 (setsockopt) cpu2 (listen) +-----------------+ +-------------+ lock_sock(sk1) lock_sock(sk2) reuseport_update_incoming_cpu(sk1, val) . | /* set CPU as 0 */ |- WRITE_ONCE(sk1->incoming_cpu, val) | | spin_lock_bh(&reuseport_lock) | reuseport_grow(sk2, reuse) | . | |- more_socks_size = reuse->max_socks * 2U; | |- if (more_socks_size > U16_MAX && | | reuse->num_closed_socks) | | . | | |- RCU_INIT_POINTER(sk1->sk_reuseport_cb, NULL); | | `- __reuseport_detach_closed_sock(sk1, reuse) | | . | | `- reuseport_put_incoming_cpu(sk1, reuse) | | . | | | /* Read shutdown()ed sk1's sk_incoming_cpu | | | * without lock_sock(). | | | */ | | `- if (sk1->sk_incoming_cpu >= 0) | | . | | | /* decrement not-yet-incremented | | | * count, which is never incremented. | | | */ | | `- __reuseport_put_incoming_cpu(reuse); | | | `- spin_lock_bh(&reuseport_lock) | |- spin_lock_bh(&reuseport_lock) | |- reuse = rcu_dereference_protected(sk1->sk_reuseport_cb, ...) |- if (!reuse) | . | | /* Cannot increment reuse->incoming_cpu. */ | `- goto out; | `- spin_unlock_bh(&reuseport_lock) Fixes: e32ea7e7 ("soreuseport: fast reuseport UDP socket selection") Fixes: c125e80b ("soreuseport: fast reuseport TCP socket selection") Reported-by:Kazuho Oku <kazuhooku@gmail.com> Signed-off-by:
-
Paolo Abeni authored
Alex Elder says: ==================== net: ipa: validation cleanup This series gathers a set of IPA driver cleanups, mostly involving code that ensures certain things are known to be correct *early* (either at build or initializatin time), so they can be assumed good during normal operation. The first removes three constant symbols, by making a (reasonable) assumption that a routing table consists of entries for the modem followed by entries for the AP, with no unused entries between them. The second removes two checks that are redundant (they verify the sizes of two memory regions are in range, which will have been done earlier for all regions). The third adds some new checks to routing and filter tables that can be done at "init time" (without requiring any access to IPA hardware). The fourth moves a check that routing and filter table addresses can be encoded within certain IPA immediate commands, so it's performed earlier; the checks can be done without touching IPA hardware. The fifth moves some other command-related checks earlier, for the same reason. The sixth removes the definition ipa_table_valid(), because what it does has become redundant. Finally, the last patch moves two more validation calls so they're done very early in the probe process. This will be required by some upcoming patches, which will record the size of the routing and filter tables at this time so they're available for subsequent initialization. ==================== Link: https://lore.kernel.org/r/20221021191340.4187935-1-elder@linaro.orgSigned-off-by:
-
Alex Elder authored
Verify that the sizes of the routing and filter table memory regions are valid as part of memory initialization, rather than waiting for table initialization. The main reason to do this is that upcoming patches use these memory region sizes to determine the number of entries in these tables, and we'll want to know these sizes are good sooner. Signed-off-by:
Alex Elder <elder@linaro.org> Signed-off-by:
-
Alex Elder authored
What ipa_table_valid() (and ipa_table_valid_one(), which it calls) does is ensure that the memory regions that hold routing and filter tables have reasonable size. Specifically, it checks that the size of a region is sufficient (or rather, exactly the right size) to hold the maximum number of entries supported by the driver. (There is an additional check that's erroneous, but in practice it is never reached.) Recently ipa_table_mem_valid() was added, which is called by ipa_table_init(). That function verifies that all table memory regions are of sufficient size, and requires hashed tables to have zero size if hashing is not supported. It only ensures the filter table is large enough to hold the number of endpoints that support filtering, but that is adequate. Therefore everything that ipa_table_valid() does is redundant, so get rid of it. Signed-off-by:
-
Alex Elder authored
Currently, ipa_cmd_data_valid() is called by ipa_mem_config(). Nothing it does requires access to hardware though, so it can be done during the init phase of IPA driver startup. Create a new function ipa_cmd_init(), whose purpose is to do early initialization related to IPA immediate commands. It will call the build-time validation function, then will make the two calls made previously by ipa_cmd_data_valid(). This make ipa_cmd_data_valid() unnecessary, so get rid of it. Rename ipa_cmd_header_valid() to be ipa_cmd_header_init_local_valid(), so its name is clearer about which IPA immediate command it is associated with. Signed-off-by:
-
Alex Elder authored
We currently verify the table size and offset fit in the immediate command fields that must encode them in ipa_table_valid_one(). We can now make this check earlier, in ipa_table_mem_valid(). The non-hashed IPv4 filter and route tables will always exist, and their sizes will match the IPv6 tables, as well as the hashed tables (if supported). So it's sufficient to verify the offset and size of the IPv4 non-hashed tables fit into these fields. Rename the function ipa_cmd_table_init_valid(), to reinforce that it is the TABLE_INIT immediate command fields we're checking. Signed-off-by:
-
Alex Elder authored
Add checks in ipa_table_init() to ensure the memory regions defined for IPA filter and routing tables are valid. For routing tables, the checks ensure: - The non-hashed IPv4 and IPv6 routing tables are defined - The non-hashed IPv4 and IPv6 routing tables are the same size - The number entries in the non-hashed IPv4 routing table is enough to hold the number entries available to the modem, plus at least one usable by the AP. For filter tables, the checks ensure: - The non-hashed IPv4 and IPv6 filter tables are defined - The non-hashed IPv4 and IPv6 filter tables are the same size - The number entries in the non-hashed IPv4 filter table is enough to hold the endpoint bitmap, plus an entry for each defined endpoint that supports filtering. In addition, for both routing and filter tables: - If hashing isn't supported (IPA v4.2), hashed tables are zero size - If hashing *is* supported, all hashed tables are the same size as their non-hashed counterparts. When validating the size of routing tables, require the AP to have at least one entry (in addition to those used by the modem). Signed-off-by: -
Alex Elder authored
There's no need to ensure table memory regions fit within the IPA-local memory range. And there's no need to ensure the modem header memory region is in range either. These are verified for all memory regions in ipa_mem_size_valid(), once we have settled on the size of IPA memory. Signed-off-by:
-
Alex Elder authored
The entries in each IPA routing table are divided between the modem and the AP. The modem always gets some number of entries located at the base of the table; the AP gets all those that follow. There's no reason to think the modem will use anything different from the first entries in a routing table, so: - Get rid of IPA_ROUTE_MODEM_MIN (just assume it's 0) - Get rid of IPA_ROUTE_AP_MIN (just assume it's IPA_ROUTE_MODEM_COUNT) And finally: - Open-code IPA_ROUTE_AP_COUNT and remove its definition Signed-off-by:
-
Paolo Abeni authored
Amritha Nambiar says: ==================== Extend action skbedit to RX queue mapping Based on the discussion on https://lore.kernel.org/netdev/166260012413.81018.8010396115034847972.stgit@anambiarhost.jf.intel.com/ , the following series extends skbedit tc action to RX queue mapping. Currently, skbedit action in tc allows overriding of transmit queue. Extending this ability of skedit action supports the selection of receive queue for incoming packets. On the receive side, this action is supported only in hardware, so the skip_sw flag is enforced. Enabled ice driver to offload this type of filter into the hardware for accepting packets to the device's receive queue. ==================== Link: https://lore.kernel.org/r/166633888716.52141.3425659377117969638.stgit@anambiarhost.jf.intel.comSigned-off-by:
-
Amritha Nambiar authored
Add tc-queue-filters.rst with notes on TC filters for selecting a set of queues and/or a queue. Signed-off-by:
Amritha Nambiar <amritha.nambiar@intel.com> Signed-off-by:
-
Amritha Nambiar authored
This patch uses TC skbedit queue_mapping action to support forwarding packets to a device queue. Such filters with action forward to queue will be the highest priority switch filter in HW. Example: $ tc filter add dev ens4f0 protocol ip ingress flower\ dst_ip 192.168.1.12 ip_proto tcp dst_port 5001\ action skbedit queue_mapping 5 skip_sw The above command adds an ingress filter, incoming packets qualifying the match will be accepted into queue 5. The queue number is in decimal format. Refactored ice_add_tc_flower_adv_fltr() to consolidate code with action FWD_TO_VSI and FWD_TO QUEUE. Reviewed-by:
Sridhar Samudrala <sridhar.samudrala@intel.com> Reviewed-by:
Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by:
-
Amritha Nambiar authored
Add support for skbedit queue mapping action on receive side. This is supported only in hardware, so the skip_sw flag is enforced. This enables offloading filters for receive queue selection in the hardware using the skbedit action. Traffic arrives on the Rx queue requested in the skbedit action parameter. A new tc action flag TCA_ACT_FLAGS_AT_INGRESS is introduced to identify the traffic direction the action queue_mapping is requested on during filter addition. This is used to disallow offloading the skbedit queue mapping action on transmit side. Example: $tc filter add dev $IFACE ingress protocol ip flower dst_ip $DST_IP\ action skbedit queue_mapping $rxq_id skip_sw Reviewed-by:
-
Jakub Kicinski authored
Russell King says: ==================== net: sfp: improve high power module implementation This series aims to improve the power level switching between standard level 1 and the higher power levels. The first patch updates the DT binding documentation to include the minimum and default of 1W, which is the base level that every SFP cage must support. Hence, it makes sense to document this in the binding. The second patch enforces a minimum of 1W when parsing the firmware description, and optimises the code for that case; there's no need to check for SFF8472 compliance since we will not need to touch the A2h registers. Patch 3 validates that the module supports SFF-8472 rev 10.2 before checking for power level 2 - rev 10.2 is where support for power levels was introduced, so if the module doesn't support this revision, it doesn't support power levels. Setting the power level 2 declaration bit is likely to be spurious. Patch 4 does the same for power level 3, except this was introduced in SFF-8472 rev 11.9. The revision code was never updated, so we use the rev 11.4 to signify this. Patch 5 cleans up the code - rather than using BIT(0), we now use a properly named value for the power level select bit. Patch 6 introduces a read-modify-write helper. Patch 7 gets rid of the DM7052 hack (which sets a power level declaration bit but is not compatible with SFF-8472 rev 10.2, and the module does not implement the A2h I2C address.) Series tested with my DM7052. v2: update sff.sfp.yaml with Rob's feedback ==================== Andrew's review tags from v1. Link: https://lore.kernel.org/r/Y0%2F7dAB8OU3jrbz6@shell.armlinux.org.uk Link: https://lore.kernel.org/r/Y1K17UtfFopACIi2@shell.armlinux.org.ukSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Russell King (Oracle) authored
Since we no longer mis-detect high-power mode with the DM7052 module, we no longer need the hack in sfp_module_enable_high_power(), and can now switch this to use sfp_modify_u8(). Signed-off-by:
Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Russell King (Oracle) authored
Add a helper to modify bits in a single byte in memory space, and use it when updating the soft tx-disable flag in the module. Signed-off-by:
-
Russell King (Oracle) authored
Provide a named definition for the power level select bit in the extended status register, rather than using BIT(0) in the code. Signed-off-by:
-
Russell King (Oracle) authored
Power level 3 was included in SFF-8472 revision 11.9, but this does not have a compliance code. Use revision 11.4 as the minimum compliance level instead. This should avoid any spurious indication of 2W modules. Signed-off-by:
-
Russell King (Oracle) authored
Power level 2 was introduced by SFF-8472 revision 10.2. Ignore the power declaration bit for modules that are not compliant with at least this revision. This should remove any spurious indication of 1.5W modules. Signed-off-by:
-
Russell King (Oracle) authored
Check that the firmware provided maximum power is at least 1W, which is the minimum power level for any SFP module. Now that we enforce the minimum of 1W, we can exit early from sfp_module_parse_power() if the module power is 1W or less. Signed-off-by:
-
Russell King (Oracle) authored
Add a minimum and default for the maximum-power-milliwatt option; module power levels were originally up to 1W, so this is the default and the minimum power level we can have for a functional SFP cage. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Jakub Kicinski authored
Michael Chan says: ==================== bnxt_en: Driver updates This patchset adds .get_module_eeprom_by_page() support and adds an NVRAM resize step to allow larger firmware images to be flashed to older firmware. ==================== Link: https://lore.kernel.org/r/1666334243-23866-1-git-send-email-michael.chan@broadcom.comSigned-off-by:
-
Vikas Gupta authored
Resize of the UPDATE entry is required if the image to be flashed is larger than the available space. Add this step, otherwise flashing larger firmware images by ethtool or devlink may fail. Reviewed-by:
Andy Gospodarek <andrew.gospodarek@broadcom.com> Signed-off-by:
Vikas Gupta <vikas.gupta@broadcom.com> Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
-
Vikas Gupta authored
Add support for .get_module_eeprom_by_page() callback which implements generic solution for module`s eeprom access. v3: Add bnxt_get_module_status() to get a more specific extack error string. Return -EINVAL from bnxt_get_module_eeprom_by_page() when we don't want to fallback to old method. v2: Simplification suggested by Ido Schimmel Link: https://lore.kernel.org/netdev/YzVJ%2FvKJugoz15yV@shredder/Signed-off-by:Ido Schimmel <idosch@nvidia.com> Signed-off-by:
-
Michael Chan authored
The main changes are PTM timestamp support, CMIS EEPROM support, and asymmetric CoS queues support. Signed-off-by:
-
- 24 Oct, 2022 9 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski authored
include/linux/net.h a5ef058d ("net: introduce and use custom sockopt socket flag") e993ffe3 ("net: flag sockets supporting msghdr originated zerocopy") Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Jakub Kicinski: "Including fixes from bpf. The net-memcg fix stands out, the rest is very run-off-the-mill. Maybe I'm biased. Current release - regressions: - eth: fman: re-expose location of the MAC address to userspace, apparently some udev scripts depended on the exact value Current release - new code bugs: - bpf: - wait for busy refill_work when destroying bpf memory allocator - allow bpf_user_ringbuf_drain() callbacks to return 1 - fix dispatcher patchable function entry to 5 bytes nop Previous releases - regressions: - net-memcg: avoid stalls when under memory pressure - tcp: fix indefinite deferral of RTO with SACK reneging - tipc: fix a null-ptr-deref in tipc_topsrv_accept - eth: macb: specify PHY PM management done by MAC - tcp: fix a signed-integer-overflow bug in tcp_add_backlog() Previous releases - always broken: - eth: amd-xgbe: SFP fixes and compatibility improvements Misc: - docs: netdev: offer performance feedback to contributors" * tag 'net-6.1-rc3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (37 commits) net-memcg: avoid stalls when under memory pressure tcp: fix indefinite deferral of RTO with SACK reneging tcp: fix a signed-integer-overflow bug in tcp_add_backlog() net: lantiq_etop: don't free skb when returning NETDEV_TX_BUSY net: fix UAF issue in nfqnl_nf_hook_drop() when ops_init() failed docs: netdev: offer performance feedback to contributors kcm: annotate data-races around kcm->rx_wait kcm: annotate data-races around kcm->rx_psock net: fman: Use physical address for userspace interfaces net/mlx5e: Cleanup MACsec uninitialization routine atlantic: fix deadlock at aq_nic_stop nfp: only clean `sp_indiff` when application firmware is unloaded amd-xgbe: add the bit rate quirk for Molex cables amd-xgbe: fix the SFP compliance codes check for DAC cables amd-xgbe: enable PLL_CTL for fixed PHY modes only amd-xgbe: use enums for mailbox cmd and sub_cmds amd-xgbe: Yellow carp devices do not need rrc bpf: Use __llist_del_all() whenever possbile during memory draining bpf: Wait for busy refill_work when destroying bpf memory allocator MAINTAINERS: add keyword match on PTP ... -
Linus Torvalds authored
Merge tag 'rcu-urgent.2022.10.20a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu Pull RCU fix from Paul McKenney: "Fix a regression caused by commit bf95b2bc ("rcu: Switch polled grace-period APIs to ->gp_seq_polled"), which could incorrectly leave interrupts enabled after an early-boot call to synchronize_rcu(). Such synchronize_rcu() calls must acquire leaf rcu_node locks in order to properly interact with polled grace periods, but the code did not take into account the possibility of synchronize_rcu() being invoked from the portion of the boot sequence during which interrupts are disabled. This commit therefore switches the lock acquisition and release from irq to irqsave/irqrestore" * tag 'rcu-urgent.2022.10.20a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: rcu: Keep synchronize_rcu() from enabling irqs in early boot
-
Linus Torvalds authored
Merge tag 'linux-kselftest-kunit-fixes-6.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull KUnit fixes from Shuah Khan: "One single fix to update alloc_string_stream() callers to check for IS_ERR() instead of NULL to be in sync with alloc_string_stream() returning an ERR_PTR()" * tag 'linux-kselftest-kunit-fixes-6.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: kunit: update NULL vs IS_ERR() tests
-
Linus Torvalds authored
Merge tag 'linux-kselftest-fixes-6.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull Kselftest fixes from Shuah Khan: - futex, intel_pstate, kexec build fixes - ftrace dynamic_events dependency check fix - memory-hotplug fix to remove redundant warning from test report * tag 'linux-kselftest-fixes-6.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftests/ftrace: fix dynamic_events dependency check selftests/memory-hotplug: Remove the redundant warning information selftests/kexec: fix build for ARCH=x86_64 selftests/intel_pstate: fix build for ARCH=x86_64 selftests/futex: fix build for clang
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlLinus Torvalds authored
Pull pin control fixes from Linus Walleij: - Fix typos in UART1 and MMC in the Ingenic driver - A really well researched glitch bug fix to the Qualcomm driver that was tracked down and fixed by Dough Anderson from Chromium. Hats off for this one! - Revert two patches on the Xilinx ZynqMP driver: this needs a proper solution making use of firmware version information to adapt to different firmware releases - Fix interrupt triggers in the Ocelot driver * tag 'pinctrl-v6.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: ocelot: Fix incorrect trigger of the interrupt. Revert "dt-bindings: pinctrl-zynqmp: Add output-enable configuration" Revert "pinctrl: pinctrl-zynqmp: Add support for output-enable and bias-high-impedance" pinctrl: qcom: Avoid glitching lines when we first mux to output pinctrl: Ingenic: JZ4755 bug fixes
-
Jakub Kicinski authored
As Shakeel explains the commit under Fixes had the unintended side-effect of no longer pre-loading the cached memory allowance. Even tho we previously dropped the first packet received when over memory limit - the consecutive ones would get thru by using the cache. The charging was happening in batches of 128kB, so we'd let in 128kB (truesize) worth of packets per one drop. After the change we no longer force charge, there will be no cache filling side effects. This causes significant drops and connection stalls for workloads which use a lot of page cache, since we can't reclaim page cache under GFP_NOWAIT. Some of the latency can be recovered by improving SACK reneg handling but nowhere near enough to get back to the pre-5.15 performance (the application I'm experimenting with still sees 5-10x worst latency). Apply the suggested workaround of using GFP_ATOMIC. We will now be more permissive than previously as we'll drop _no_ packets in softirq when under pressure. But I can't think of any good and simple way to address that within networking. Link: https://lore.kernel.org/all/20221012163300.795e7b86@kernel.org/Suggested-by:
Shakeel Butt <shakeelb@google.com> Fixes: 4b1327be ("net-memcg: pass in gfp_t mask to mem_cgroup_charge_skmem()") Acked-by:
Roman Gushchin <roman.gushchin@linux.dev> Link: https://lore.kernel.org/r/20221021160304.1362511-1-kuba@kernel.orgSigned-off-by:
-
Neal Cardwell authored
This commit fixes a bug that can cause a TCP data sender to repeatedly defer RTOs when encountering SACK reneging. The bug is that when we're in fast recovery in a scenario with SACK reneging, every time we get an ACK we call tcp_check_sack_reneging() and it can note the apparent SACK reneging and rearm the RTO timer for srtt/2 into the future. In some SACK reneging scenarios that can happen repeatedly until the receive window fills up, at which point the sender can't send any more, the ACKs stop arriving, and the RTO fires at srtt/2 after the last ACK. But that can take far too long (O(10 secs)), since the connection is stuck in fast recovery with a low cwnd that cannot grow beyond ssthresh, even if more bandwidth is available. This fix changes the logic in tcp_check_sack_reneging() to only rearm the RTO timer if data is cumulatively ACKed, indicating forward progress. This avoids this kind of nearly infinite loop of RTO timer re-arming. In addition, this meets the goals of tcp_check_sack_reneging() in handling Windows TCP behavior that looks temporarily like SACK reneging but is not really. Many thanks to Jakub Kicinski and Neil Spring, who reported this issue and provided critical packet traces that enabled root-causing this issue. Also, many thanks to Jakub Kicinski for testing this fix. Fixes: 5ae344c9 ("tcp: reduce spurious retransmits due to transient SACK reneging") Reported-by:
Neil Spring <ntspring@fb.com> Signed-off-by:
Neal Cardwell <ncardwell@google.com> Reviewed-by:
Eric Dumazet <edumazet@google.com> Cc: Yuchung Cheng <ycheng@google.com> Tested-by:
-
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfJakub Kicinski authored
Alexei Starovoitov says: ==================== pull-request: bpf 2022-10-23 We've added 7 non-merge commits during the last 18 day(s) which contain a total of 8 files changed, 69 insertions(+), 5 deletions(-). The main changes are: 1) Wait for busy refill_work when destroying bpf memory allocator, from Hou. 2) Allow bpf_user_ringbuf_drain() callbacks to return 1, from David. 3) Fix dispatcher patchable function entry to 5 bytes nop, from Jiri. 4) Prevent decl_tag from being referenced in func_proto, from Stanislav. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: bpf: Use __llist_del_all() whenever possbile during memory draining bpf: Wait for busy refill_work when destroying bpf memory allocator bpf: Fix dispatcher patchable function entry to 5 bytes nop bpf: prevent decl_tag from being referenced in func_proto selftests/bpf: Add reproducer for decl_tag in func_proto return type selftests/bpf: Make bpf_user_ringbuf_drain() selftest callback return 1 bpf: Allow bpf_user_ringbuf_drain() callbacks to return 1 ==================== Link: https://lore.kernel.org/r/20221023192244.81137-1-alexei.starovoitov@gmail.comSigned-off-by:
-
