- 21 Feb, 2018 5 commits
-
-
Finn Thain authored
The lib8390 module parameter 'msg_enable' doesn't do anything useful: it causes an ancient version string to be logged. Remove redundant code that logs the same string. In ne.c and wd.c, the value of ei_local->msg_enable is used before being assigned. Use ne_msg_enable and wd_msg_enable, respectively. Most of the other 8390 drivers never assign ei_local->msg_enable. Use the 'msg_enable' module parameter from lib8390 as the default value. Eliminate the pointless static and local variables. Clean up an indentation mistake. All of these issues originated from the same patch. Cc: Russell King <linux@armlinux.org.uk> Fixes: c45f812f ("8390 : Replace ei_debug with msg_enable/NETIF_MSG_* feature") Tested-by:
Stan Johnson <userm57@yahoo.com> Signed-off-by:
Finn Thain <fthain@telegraphics.com.au> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Finn Thain authored
The hydra, zorro8390 and mcf8390 drivers all #include "lib8390.c" and have no need for 8390.o. modinfo confirms no dependency on 8390.ko. Drop the redundant dependency from the Makefile. objdump confirms that this patch has no effect on the module binaries. The superfluous additions of 8390.o were introduced in commit 644570b8 ("8390: Move the 8390 related drivers"). Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Acked-by:
Greg Ungerer <gerg@linux-m68k.org> Signed-off-by:
-
Heiner Kallweit authored
rtl8169_init_phy() resets the PHY anyway after applying the chip-specific PHY configuration. So we don't need to soft-reset the PHY as part of the chip-specific configuration. Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
-
Eyal Birger authored
The commit a new tc ematch for using netfilter xtable matches. This allows early classification as well as mirroning/redirecting traffic based on logic implemented in netfilter extensions. Current supported use case is classification based on the incoming IPSec state used during decpsulation using the 'policy' iptables extension (xt_policy). The module dynamically fetches the netfilter match module and calls it using a fake xt_action_param structure based on validated userspace provided parameters. As the xt_policy match does not access skb->data, no skb modifications are needed on match. Signed-off-by:
Eyal Birger <eyal.birger@gmail.com> Signed-off-by:
-
Heiner Kallweit authored
Commit bde135a6 "r8169: only enable PCI wakeups when WOL is active" removed the only user of flag RTL_FEATURE_WOL. So let's remove some now dead code. Signed-off-by:
-
- 20 Feb, 2018 20 commits
-
-
David S. Miller authored
Niklas Cassel says: ==================== stmmac multi-queue fixes and cleanups ==================== Reviewed-by:
Jose Abreu <joabreu@synopsys.com> Signed-off-by:
-
Niklas Cassel authored
Honor error code from stmmac_dt_phy() instead of always returning -ENODEV. No functional change intended. Signed-off-by:
Niklas Cassel <niklas.cassel@axis.com> Signed-off-by:
-
Niklas Cassel authored
The device tree binding for stmmac says: - Multiple TX Queues parameters: below the list of all the parameters to configure the multiple TX queues: - snps,tx-queues-to-use: number of TX queues to be used in the driver [...] - For each TX queue [...] However, if one specifies snps,tx-queues-to-use = 2, but omits the queue subnodes, or defines just one queue subnode, since the driver appears to initialize queues with sane default values, we will get tx queue timeouts. This is because the initialization code only initializes as many queues as it finds subnodes. Potentially leaving some queues uninitialized. To avoid hard to debug issues, return an error if the number of subnodes differ from snps,tx-queues-to-use/snps,rx-queues-to-use. Signed-off-by: -
Niklas Cassel authored
stmmac_mac_config_rx_queues_routing() incorrectly calls rx_queue_prio() instead of rx_queue_routing(). This looks like a copy paste issue, since stmmac_mac_config_rx_queues_prio() already calls rx_queue_prio(), and both stmmac_mac_config_rx_queues_routing() and stmmac_mac_config_rx_queues_prio() are very similar in structure. Fixes: abe80fdc ("net: stmmac: RX queue routing configuration") Signed-off-by:
-
Niklas Cassel authored
Looking at dwmac4_tx_queue_routing(), it is obvious that it sets up rx queue routing. Rename dwmac4_tx_queue_routing() to dwmac4_rx_queue_routing() to better match reality. Fixes: abe80fdc ("net: stmmac: RX queue routing configuration") Signed-off-by:
-
Niklas Cassel authored
The current code assumes that a tx_skbuff entry has been cleared by stmmac_tx_clean() before stmmac_xmit()/stmmac_tso_xmit() assigns a new skb to that entry. However, since we never check the current value before overwriting it, it is theoretically possible that a non-NULL value is overwritten. Add WARN_ONs to verify that each entry in tx_skbuff is NULL before it is assigned a new value. Signed-off-by:
-
Niklas Cassel authored
tx_skbuff is initialized to NULL in init_dma_tx_desc_rings(), which is called from ndo_open(). stmmac_tx_clean() frees any non-NULL skb, and sets the tx_skbuff entry to NULL. Hence, there is no need to set skbuff entries to NULL in stmmac_xmit()/stmmac_tso_xmit(), and doing so falsely gives the reader the impression that it is needed. Do not clear tx_skbuff entries in stmmac_xmit()/stmmac_tso_xmit(). Signed-off-by:
-
Niklas Cassel authored
The DMA engine in dwmac4 can segment a large TSO packet to several smaller packets of (max) size Maximum Segment Size (MSS). The DMA engine fetches and saves the MSS via a context descriptor. This context decriptor has to be provided to each tx DMA channel. To ensure that this is done, move struct member mss from stmmac_priv to stmmac_tx_queue. stmmac_reset_queues_param() now also resets mss, together with other queue parameters, so reset of mss value can be removed from stmmac_resume(). init_dma_tx_desc_rings() now also resets mss, together with other queue parameters, so reset of mss value can be removed from stmmac_open(). This fixes tx queue timeouts for dwmac4, with DT property snps,tx-queues-to-use > 1, when running iperf3 with multiple threads. Fixes: ce736788 ("net: stmmac: adding multiple buffers for TX") Signed-off-by:
-
Antonio Cardace authored
Use %*ph format to print small buffer as hex string. Suggested-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
Antonio Cardace <anto.cardace@gmail.com> Signed-off-by:
-
David S. Miller authored
Jiri Pirko says: ==================== net: Expose KVD linear parts as resources Arkadi says: Expose the KVD linear partitions via the devlink resource interface. This will give the user the ability to control the linear memory division. --- v1->v2: - patch1: - fixed u64 division error reported by kbuildbot ==================== Signed-off-by: -
Arkadi Sharshevsky authored
Add support for calculating occupancy for separate kvdl parts. Signed-off-by:
Arkadi Sharshevsky <arkadis@mellanox.com> Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
Arkadi Sharshevsky authored
Add support for dynamic partition set via the resource interface. Signed-off-by:
-
Arkadi Sharshevsky authored
The linear part of the KVD memory is sub-divided into multiple parts. This patch exposes this internal partitions via the resource interface. Signed-off-by:
-
Arkadi Sharshevsky authored
After adding size validation logic into core cleanup is required. Signed-off-by:
-
Arkadi Sharshevsky authored
Currently the size validation is done via a cb, which is unneeded. The size validation can be moved to core. The next patch will perform cleanup. Signed-off-by:
-
David S. Miller authored
Kirill Tkhai says: ==================== net: Get rid of net_mutex and simplify cleanup_list queueing [1/3] kills net_mutex and makes net_sem be taken for write instead. This is made to take less locks (1 instead of 2) for the time before all pernet_operations are converted. [2-3/3] simplifies dead net cleanup queueing, and makes llist api be used for that. ==================== Signed-off-by: -
Kirill Tkhai authored
When llist_add() returns false, cleanup_net() hasn't made its llist_del_all(), while the work has already been scheduled by the first queuer. So, we may skip queue_work() in this case. Signed-off-by:
Kirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by:
-
Kirill Tkhai authored
This simplifies cleanup queueing and makes cleanup lists to use llist primitives. Since llist has its own cmpxchg() ordering, cleanup_list_lock is not more need. Also, struct llist_node is smaller, than struct list_head, so we save some bytes in struct net with this patch. Signed-off-by:
-
Kirill Tkhai authored
We take net_mutex, when there are !async pernet_operations registered, and read locking of net_sem is not enough. But we may get rid of taking the mutex, and just change the logic to write lock net_sem in such cases. This obviously reduces the number of lock operations, we do. Signed-off-by:
-
Thomas Falcon authored
Supplementary TX descriptors were not being accounted for, which was resulting in an overflow of the hardware device's transmit queue. Keep track of those descriptors now when determining how many entries remain on the TX queue. Signed-off-by:
Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by:
-
- 19 Feb, 2018 15 commits
-
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Prevent index integer overflow in ptr_ring, from Jason Wang. 2) Program mvpp2 multicast filter properly, from Mikulas Patocka. 3) The bridge brport attribute file is write only and doesn't have a ->show() method, don't blindly invoke it. From Xin Long. 4) Inverted mask used in genphy_setup_forced(), from Ingo van Lil. 5) Fix multiple definition issue with if_ether.h UAPI header, from Hauke Mehrtens. 6) Fix GFP_KERNEL usage in atomic in RDS protocol code, from Sowmini Varadhan. 7) Revert XDP redirect support from thunderx driver, it is not implemented properly. From Jesper Dangaard Brouer. 8) Fix missing RTNL protection across some tipc operations, from Ying Xue. 9) Return the correct IV bytes in the TLS getsockopt code, from Boris Pismenny. 10) Take tclassid into consideration properly when doing FIB rule matching. From Stefano Brivio. 11) cxgb4 device needs more PCI VPD quirks, from Casey Leedom. 12) TUN driver doesn't align frags properly, and we can end up doing unaligned atomics on misaligned metadata. From Eric Dumazet. 13) Fix various crashes found using DEBUG_PREEMPT in rmnet driver, from Subash Abhinov Kasiviswanathan. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (56 commits) tg3: APE heartbeat changes mlxsw: spectrum_router: Do not unconditionally clear route offload indication net: qualcomm: rmnet: Fix possible null dereference in command processing net: qualcomm: rmnet: Fix warning seen with 64 bit stats net: qualcomm: rmnet: Fix crash on real dev unregistration sctp: remove the left unnecessary check for chunk in sctp_renege_events rxrpc: Work around usercopy check tun: fix tun_napi_alloc_frags() frag allocator udplite: fix partial checksum initialization skbuff: Fix comment mis-spelling. dn_getsockoptdecnet: move nf_{get/set}sockopt outside sock lock PCI/cxgb4: Extend T3 PCI quirk to T4+ devices cxgb4: fix trailing zero in CIM LA dump cxgb4: free up resources of pf 0-3 fib_semantics: Don't match route with mismatching tclassid NFC: llcp: Limit size of SDP URI tls: getsockopt return record sequence number tls: reset the crypto info if copy_from_user fails tls: retrun the correct IV in getsockopt docs: segmentation-offloads.txt: add SCTP info ... -
Paolo Abeni authored
syzbot reported a scheduling while atomic issue at netns destruction time: BUG: sleeping function called from invalid context at net/core/sock.c:2769 in_atomic(): 1, irqs_disabled(): 0, pid: 85, name: kworker/u4:3 5 locks held by kworker/u4:3/85: #0: ((wq_completion)"%s""netns"){+.+.}, at: [<00000000c9792deb>] process_one_work+0xaaf/0x1af0 kernel/workqueue.c:2084 #1: (net_cleanup_work){+.+.}, at: [<00000000adc12e2a>] process_one_work+0xb01/0x1af0 kernel/workqueue.c:2088 #2: (net_sem){++++}, at: [<000000009ccb5669>] cleanup_net+0x23f/0xd20 net/core/net_namespace.c:494 #3: (net_mutex){+.+.}, at: [<00000000a92767d9>] cleanup_net+0xa7d/0xd20 net/core/net_namespace.c:496 #4: (&(&srv->idr_lock)->rlock){+...}, at: [<000000001343e568>] spin_lock_bh include/linux/spinlock.h:315 [inline] #4: (&(&srv->idr_lock)->rlock){+...}, at: [<000000001343e568>] tipc_topsrv_stop+0x231/0x610 net/tipc/topsrv.c:685 CPU: 0 PID: 85 Comm: kworker/u4:3 Not tainted 4.16.0-rc1+ #230 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: netns cleanup_net Call Trace: __dump_stack lib/dump_stack.c:17 [inline] dump_stack+0x194/0x257 lib/dump_stack.c:53 ___might_sleep+0x2b2/0x470 kernel/sched/core.c:6128 __might_sleep+0x95/0x190 kernel/sched/core.c:6081 lock_sock_nested+0x37/0x110 net/core/sock.c:2769 lock_sock include/net/sock.h:1463 [inline] tipc_release+0x103/0xff0 net/tipc/socket.c:572 sock_release+0x8d/0x1e0 net/socket.c:594 tipc_topsrv_stop+0x3c0/0x610 net/tipc/topsrv.c:696 tipc_exit_net+0x15/0x40 net/tipc/core.c:96 ops_exit_list.isra.6+0xae/0x150 net/core/net_namespace.c:148 cleanup_net+0x6ba/0xd20 net/core/net_namespace.c:529 process_one_work+0xbbf/0x1af0 kernel/workqueue.c:2113 worker_thread+0x223/0x1990 kernel/workqueue.c:2247 kthread+0x33c/0x400 kernel/kthread.c:238 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:429 This is caused by tipc_topsrv_stop() releasing the listener socket with the idr lock held. This changeset addresses the issue moving the release operation outside such lock. Reported-and-tested-by: syzbot+749d9d87c294c00ca856@syzkaller.appspotmail.com Fixes: 0ef897be ("tipc: separate topology server listener socket from subcsriber sockets") Signed-off-by:Paolo Abeni <pabeni@redhat.com> Acked-by: ///jon Signed-off-by:
-
Jon Maloy authored
In commit cc1ea9ffadf7 ("tipc: eliminate struct tipc_subscriber") we re-introduced an old bug on the error path in the function tipc_topsrv_kern_subscr(). We now re-introduce the correction too. Reported-by: syzbot+f62e0f2a0ef578703946@syzkaller.appspotmail.com Signed-off-by:Jon Maloy <jon.maloy@ericsson.com> Signed-off-by:
-
David S. Miller authored
Kirill Tkhai says: ==================== Converting pernet_operations (part #2) This patchset continues to review and to convert pernet_operations to async. There are mostly ipv6, also some regular used netfilter pernet_operations are involved. One more converted is cfg80211_pernet_ops. ==================== Signed-off-by: -
Kirill Tkhai authored
These pernet_operations register and unregister net::ipv4.iptable_filter table. Since there are no packets in-flight at the time of exit method is working, iptables rules should not be touched. Also, pernet_operations should not send ipv4 packets each other. So, it's safe to mark them async. Signed-off-by:
-
Kirill Tkhai authored
ip_tables_net_ops and udplite6_net_ops create and destroy /proc entries. xt_net_ops does nothing. So, we are able to mark them async. Signed-off-by:
-
Kirill Tkhai authored
Exit methods calls inet_frags_exit_net() with global ip6_frags as argument. So, after we make the pernet_operations async, a pair of exit methods may be called to iterate this hash table. Since there is inet_frag_worker(), which already may work in parallel with inet_frags_exit_net(), and it can make the same cleanup, that inet_frags_exit_net() does, it's safe. So we may mark these pernet_operations as async. Signed-off-by:
-
Kirill Tkhai authored
These pernet_operations register and unregister tables and lists for packets forwarding. All of the entities are per-net. Init methods makes simple initializations, and since net is not visible for foreigners at the time it is working, it can't race with anything. Exit method is executed when there are only local devices, and there mustn't be packets in-flight. Also, it looks like no one pernet_operations want to send ipv6 packets to foreign net. The same reasons are for ipv6_addr_label_ops and ip6_segments_ops. So, we are able to mark all them as async. Signed-off-by:
-
Kirill Tkhai authored
These pernet_operations create sysctl tables and initialize net::xfrm.xfrm6_dst_ops used for routing. It doesn't look like another pernet_operations send ipv6 packets to foreign net namespaces, so it should be safe to mark the pernet_operations as async. Signed-off-by:
-
Kirill Tkhai authored
These pernet_operations create and destroy /proc entries. ip6_fl_purge() makes almost the same actions as timer ip6_fl_gc_timer does, and as it can be executed in parallel with ip6_fl_purge(), two parallel ip6_fl_purge() may be executed. So, we can mark it async. Signed-off-by:
-
Kirill Tkhai authored
These pernet_operations only register and unregister /proc entries, so it's possible to mark them async. Signed-off-by:
-
Kirill Tkhai authored
These pernet_operations create and destroy sysctl tables. They are not touched by another net pernet_operations. So, it's possible to execute them in parallel with others. Signed-off-by:
-
Kirill Tkhai authored
These pernet_operations create and destroy net::ipv6.tcp_sk socket, which is used in tcp_v6_send_response() only. It looks like foreign pernet_operations don't want to set ipv6 connection inside destroyed net, so this socket may be created in destroyed in parallel with anything else. inet_twsk_purge() is also safe for that, as described in patch for tcp_sk_ops. So, it's possible to mark them as async. Signed-off-by:
-
Kirill Tkhai authored
These pernet_operations register and unregister net::ipv6.fib6_rules_ops, which are used for routing. It looks like there are no pernet_operations, which send ipv6 packages to another net, so we are able to mark them as async. Signed-off-by:
-
