- 05 May, 2020 3 commits
-
-
Lubomir Rintel authored
Chrontel makes encoders for video displays and perhaps other stuff. Their web site is http://www.chrontel.com/. Signed-off-by:
Lubomir Rintel <lkundrak@v3.sk> Acked-by:
Rob Herring <robh@kernel.org> Signed-off-by:
Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200424213539.93157-2-lkundrak@v3.sk
-
Tomi Valkeinen authored
AM65x PG1 has a HW issue with YUV pixel formats, resulting in wrong colors on the screen. This issue is fixed in PG2 hardware. The driver currently has code to hide YUV pixel formats from the userspace. To support PG2, we would need to add code to detect the SoC version and hide the YUV formats based on that. However, as PG1 will be phased out and PG2 will be the main platform, a much simpler solution is just to drop the code in question. The downside is that the users will be able to use YUV formats on PG1, getting wrong colors on the screen. On the other hand, that may also be a plus, as the same applications will now work on PG1 and PG2, even if the colors are wrong on PG1. Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ti.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200429121022.3871-1-tomi.valkeinen@ti.comReviewed-by:
Jyri Sarha <jsarha@ti.com>
-
Tomi Valkeinen authored
If the given videomode does not specify DISPLAY_FLAG_* for the specific signal property, the driver used a default value. These defaults were never thought through, as the expectation was that all the DISPLAY_FLAGS are always set explicitly. With DRM bridge and panel drivers this is not the case, and while that issue should be resolved in the future, it's still good to have sane signal defaults. This patch changes the defaults to what the hardware has as reset defaults. Also, based on my experience, I think they make sense and are more likely correct than the defaults without this patch. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com>
-
- 04 May, 2020 3 commits
-
-
David Lu authored
fix boe_tv105wum_nw0 display shift. Signed-off-by:
David Lu <david.lu@bitland.com.cn> Fixes: 963518c1 ("drm/panel: support for boe,tv105wum-nw0 dsi video mode panel") Cc: David Lu <david.lu@bitland.com.cn> Cc: Nicolas Boichat <drinkcat@chromium.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: dri-devel@lists.freedesktop.org Signed-off-by:
Sam Ravnborg <sam@ravnborg.org> [added fixes tag] Link: https://patchwork.freedesktop.org/patch/msgid/20200428064521.21511-1-david.lu@bitland.com.cn
-
Adrian Ratiu authored
This converts the Synopsis MIPI DSI binding documentation to yaml and should be quite straightforward. I've added a missing ref clk and also added Philippe as maintainer b/c he's the original txt author following the algorithm provided in Message-ID 20200420175909.GA5810@ravnborg.org. Cc: Philippe CORNU <philippe.cornu@st.com> Cc: devicetree@vger.kernel.org Suggested-by:
Adrian Ratiu <adrian.ratiu@collabora.com> Signed-off-by:
-
Tomi Valkeinen authored
The AUO G101EVN010 is a 18-bit LVDS panel, not a parallel panel, as indicated by the current bus_format. Fix the bus_format to MEDIA_BUS_FMT_RGB666_1X7X3_SPWG, and also set the connector_type to LVDS. Signed-off-by:
-
- 02 May, 2020 2 commits
-
-
allen authored
Add a DT binding documentation for IT6505. Acked-by:
Allen Chen <allen.chen@ite.com.tw> Signed-off-by:
Pi-Hsun Shih <pihsun@chromium.org> Signed-off-by:
-
allen authored
ITE Tech. Inc. (abbreviated as ITE ) is a professional fabless IC design house. ITE's core technology includes PC and NB Controller chips, Super I/O, High Speed Serial Interface, Video Codec, Touch Sensing, Surveillance, OFDM, Sensor Fusion, and so on. Our official name is "ITE Tech. Inc.", so change "ITE," to "ITE.". more information on: http://www.ite.com.tw/Signed-off-by:
-
- 30 Apr, 2020 2 commits
-
-
Rodrigo Siqueira authored
In the file drm_dp_helper.h we have a macro named DP_DSC_THROUGHPUT_MODE_{0,1}_UPSUPPORTED, the correct name should be DP_DSC_THROUGHPUT_MODE_{0,1}_UNSUPPORTED. This commits adjusts this typo in the header file and in other places that attempt to access this macro. Reviewed-by:Harry Wentland <harry.wentland@amd.com> Signed-off-by:
Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200429184142.1867987-1-Rodrigo.Siqueira@amd.com
-
Jason Yan authored
The struct member 'set_config' was assigned twice: static const struct drm_crtc_funcs ast_crtc_funcs = { .reset = ast_crtc_reset, .set_config = drm_crtc_helper_set_config, ...... .set_config = drm_atomic_helper_set_config, ...... }; Since the second one is which we use now in fact, we can remove the first one. This fixes the following coccicheck warning: drivers/gpu/drm/ast/ast_mode.c:932:50-51: set_config: first occurrence line 934, second occurrence line 937 Signed-off-by:Jason Yan <yanaijie@huawei.com> Signed-off-by:
Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by:
-
- 29 Apr, 2020 4 commits
-
-
Arnd Bergmann authored
Some older versions of gcc badly optimize code that passes an inline function argument into another function by reference, causing huge stack usage: drivers/gpu/drm/bridge/tc358768.c: In function 'tc358768_bridge_pre_enable': drivers/gpu/drm/bridge/tc358768.c:840:1: error: the frame size of 2256 bytes is larger than 2048 bytes [-Werror=frame-larger-than=] Use a temporary variable as a workaround and add a comment pointing to the gcc bug. Fixes: ff1ca639 ("drm/bridge: Add tc358768 driver") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Reviewed-by:
-
Bartlomiej Zolnierkiewicz authored
powerpc allyesconfig fails like this: drivers/video/fbdev/controlfb.c: In function 'controlfb_mmap': drivers/video/fbdev/controlfb.c:756:23: error: implicit declaration of function 'pgprot_cached_wthru'; did you mean 'pgprot_cached'? [-Werror=implicit-function-declaration] 756 | vma->vm_page_prot = pgprot_cached_wthru(vma->vm_page_prot); | ^~~~~~~~~~~~~~~~~~~ | pgprot_cached drivers/video/fbdev/controlfb.c:756:23: error: incompatible types when assigning to type 'pgprot_t' {aka 'struct <anonymous>'} from type 'int' Fix it by adding missing PPC32 dependency. Fixes: a07a63b0 ("video: fbdev: controlfb: add COMPILE_TEST support") Reported-by:Stephen Rothwell <sfr@canb.auug.org.au> Reported-by:
kbuild test robot <lkp@intel.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by:
-
Ville Syrjälä authored
Let's just calculate the hsync rate on demand. No point in wasting space storing it and risking the cached value getting out of sync with reality. v2: Move drm_mode_hsync() next to its only users Drop the TODO Reviewed-by:Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200428171940.19552-2-ville.syrjala@linux.intel.com
-
Thomas Zimmermann authored
MAINTAINERS got sorted in commit 4400b7d6 ("MAINTAINERS: sort entries by entry name") Merging from drm-next into drm-misc-next duplicated some of the entries by restoring old, unsorted sections. Restore the sorted list by removing the duplicates. Signed-off-by:
-
- 28 Apr, 2020 26 commits
-
-
Rob Herring authored
Since the VExpress setup in pl111_vexpress.c is now just a single function call, let's move it into pl111_versatile.c and we can further simplify pl111_versatile_init() by moving the other pieces for VExpress into pl111_vexpress_clcd_init(). Cc: Eric Anholt <eric@anholt.net> Cc: dri-devel@lists.freedesktop.org Acked-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Rob Herring authored
The init VExpress variants currently instantiates a 'muxfpga' driver for the sole purpose of getting a regmap for it. There's no reason to instantiate a driver and doing so just complicates things. The muxfpga driver also isn't unregistered properly on module unload. Let's just simplify all this this by just calling devm_regmap_init_vexpress_config() directly. Cc: Eric Anholt <eric@anholt.net> Cc: dri-devel@lists.freedesktop.org Acked-by:
-
Rob Herring authored
Add a missing MODULE_DEVICE_TABLE entry to fix module autoloading. Cc: Eric Anholt <eric@anholt.net> Cc: dri-devel@lists.freedesktop.org Acked-by:
-
Daniel Vetter authored
Luckily we're already well set up in the main driver, with drm_dev_put() being the last thing in both the unload error case and the pci remove function. Acked-by:
Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200415074034.175360-39-daniel.vetter@ffwll.ch
-
Daniel Vetter authored
Upcasting using a container_of macro is more typesafe, faster and easier for the compiler to optimize. Acked-by:
Gerd Hoffmann <kraxel@redhat.com> Acked-by:
-
Daniel Vetter authored
Also need to remove the drm_dev_put from the remove hook. Acked-by:
-
Kenny Levinsen authored
Some processes, such as systemd, are only polling for EPOLLERR|EPOLLHUP. As drm_file uses unkeyed wakeups, such a poll receives many spurious wakeups from uninteresting events. Use keyed wakeups to allow the wakeup target to more efficiently discard these uninteresting events. Signed-off-by:
Kenny Levinsen <kl@kl.wtf> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20200424145103.3048-1-kl@kl.wtf
-
Daniel Vetter authored
This is leftovers from the old drm_driver->load callback upside-down issues. It doesn't do anything for not-hotplugged connectors since drm_dev_register takes care of that. Acked-by:
-
Daniel Vetter authored
This is only needed for hotpluggable connectors set up after drm_dev_register(). Reviewed-by:
-
Daniel Vetter authored
As usual, we can drop the drm_dev_put() and need to embed the drm_device. Since it's so few, also go right ahead and leave drm_device->dev_private set to NULL, so that we always use the container_of() upcast, which is faster anyway. Acked-by:
-
Daniel Vetter authored
No longer used since the conversion to generic fbdev. Acked-by:
-
Daniel Vetter authored
Because it is. Huge congrats to everyone who made this kind of refactoring happen! Acked-by:
-
Daniel Vetter authored
Upcasting using a container_of macro is more typesafe, faster and easier for the compiler to optimize. Acked-by:
Eric Anholt <eric@anholt.net> Acked-by:
-
Daniel Vetter authored
Already using devm_drm_dev_init, so very simple replacment. Acked-by:
Noralf Trønnes <noralf@tronnes.org> Acked-by:
-
Daniel Vetter authored
Komeda uses the component framework, which does open/close a new devres group around all the bind callbacks. Which means we can use devm_ functions for managing the drm_device cleanup, with leaking stuff in case of deferred probes or other reasons to unbind components, or the component_master. Also note that this fixes a double-free in the probe unroll code, bot drm_dev_put and kfree(kms) result in the kms allocation getting freed. Aside: komeda_bind could be cleaned up a lot, devm_kfree is a bit redundant. Plus I'm not clear on why there's suballocations for mdrv->mdev and mdrv->kms. Plus I'm not sure the lifetimes are correct with all that devm_kzalloc usage ... That structure layout is also the reason why komeda still uses drm_device->dev_private and can't easily be replaced with a proper container_of upcasting. I'm pretty sure that there's endless amounts of hotunplug/hotremove bugs in there with all the unprotected dereferencing of drm_device->dev_private. Reviewed-by:
James Qian Wang <james.qian.wang@arm.com> Signed-off-by:
-
Daniel Vetter authored
Entirely not used, just copypasta. Acked-by:
-
Daniel Vetter authored
Already using devm_drm_dev_init, so very simple replacment. Acked-by:
-
Daniel Vetter authored
Upcasting using a container_of macro is more typesafe, faster and easier for the compiler to optimize. v2: Move misplaced removal of double-assignment to this patch (Sam) Reviewed-by: Linus Walleij <linus.walleij@linaro.org> (v1) Acked-by:
-
Daniel Vetter authored
Already using devm_drm_dev_init, so very simple replacment. v2: Move misplaced double-assignement to next patch (Sam) Acked-by:
-
Daniel Vetter authored
Not used anymore since the switch to suspend/resume helpers. Tested-by:
-
Daniel Vetter authored
Upcasting using a container_of macro is more typesafe, faster and easier for the compiler to optimize. Tested-by:
-
Daniel Vetter authored
Already using devm_drm_dev_init, so very simple replacment. Tested-by:
-
Daniel Vetter authored
Upcasting using a container_of macro is more typesafe, faster and easier for the compiler to optimize. Acked-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Daniel Vetter authored
Already using devm_drm_dev_init, so very simple replacment. Acked-by:
-
Daniel Vetter authored
Already using devm_drm_dev_init, so very simple replacment. Acked-by:
-
Daniel Vetter authored
Already using devm_drm_dev_init, so very simple replacment. Acked-by:
David Lechner <david@lechnology.com> Acked-by:
-
