- 27 Apr, 2021 11 commits
-
-
Fabio M. De Francesco authored
drm_send_event_helper() has not prototype, it has internal linkage and therefore it should be defined with storage class 'static'. Signed-off-by:
Fabio M. De Francesco <fmdefrancesco@gmail.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210427105503.10765-1-fmdefrancesco@gmail.com
-
Takashi Iwai authored
On bochs DRM driver, the execution of "setterm --blank force" results in a frozen screen instead of a blank screen. It's due to the lack of the screen blanking support in its code. Actually, the QEMU bochs vga side can switch to the blanking mode when the bit 0x20 is cleared on VGA_ATT_IW register (0x3c0), which updates ar_index in QEMU side. So, essentially, we'd just need to clear the bit at pipe disable callback; that's what this patch does essentially. However, a tricky part is that the access via VGA_ATT_IW is done in "flip-flop"; the first write is for index and the second write is for the data like palette. Meanwhile, in the current bochs DRM driver, the flip-flop wasn't considered, and it calls only the register update once with the value 0x20. The spec and the actual VGA implementation in QEMU suggests that the flip flop flag is discarded by reading the CRTC index register (VGA_IS1_RC, 0x3da). So, in this patch, we add the helper to read a byte and the call to clear the flip flop flag before changing the blank / unblank setup via VGA_ATT_IW register. v1->v2: * discard ar_flip_flop by reading 0x3da, add bochs_vga_readb() * include video/vga.h for VGA register definitions * move the blank/unblank code to bochs_hw_blank() Signed-off-by:
Takashi Iwai <tiwai@suse.de> Acked-by:
Gerd Hoffmann <kraxel@redhat.com> Signed-off-by:
Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20210421080859.14869-1-tiwai@suse.de
-
KuoHsiang Chou authored
[Bug][DP501] If ASPEED P2A (PCI to AHB) bridge is disabled and disallowed for CVE_2019_6260 item3, and then the monitor's EDID is unable read through Parade DP501. The reason is the DP501's FW is mapped to BMC addressing space rather than Host addressing space. The resolution is that using "pci_iomap_range()" maps to DP501's FW that stored on the end of FB (Frame Buffer). In this case, FrameBuffer reserves the last 2MB used for the image of DP501. Signed-off-by:
KuoHsiang Chou <kuohsiang_chou@aspeedtech.com> Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
-
Andy Shevchenko authored
The GPIO request can fail and probe may be deferred. Thus, the error message may be printed again and again. Avoid this by replacing DRM_DEV_ERROR() by dev_err_probe(). Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
Noralf Trønnes <noralf@tronnes.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210421163157.50949-7-andriy.shevchenko@linux.intel.com
-
Andy Shevchenko authored
The GPIO request can fail and probe may be deferred. Thus, the error message may be printed again and again. Avoid this by replacing DRM_DEV_ERROR() by dev_err_probe(). Signed-off-by:
-
Andy Shevchenko authored
The GPIO request can fail and probe may be deferred. Thus, the error message may be printed again and again. Avoid this by replacing DRM_DEV_ERROR() by dev_err_probe(). Signed-off-by:
-
Andy Shevchenko authored
The GPIO request can fail and probe may be deferred. Thus, the error message may be printed again and again. Avoid this by replacing DRM_DEV_ERROR() by dev_err_probe(). Signed-off-by:
-
Andy Shevchenko authored
The GPIO request can fail and probe may be deferred. Thus, the error message may be printed again and again. Avoid this by replacing DRM_DEV_ERROR() by dev_err_probe(). Signed-off-by:
-
Andy Shevchenko authored
The GPIO request can fail and probe may be deferred. Thus, the error message may be printed again and again. Avoid this by replacing DRM_DEV_ERROR() by dev_err_probe(). Signed-off-by:
-
Andy Shevchenko authored
The GPIO request can fail and probe may be deferred. Thus, the error message may be printed again and again. Avoid this by replacing DRM_DEV_ERROR() by dev_err_probe(). Signed-off-by:
-
Bernard Zhao authored
Fix coccicheck warning: drivers/gpu/drm/gud/gud_internal.h:89:2-3: Unneeded semicolon drivers/gpu/drm/gud/gud_internal.h:107:2-3: Unneeded semicolon Signed-off-by:
Bernard Zhao <bernard@vivo.com> Signed-off-by:
-
- 26 Apr, 2021 8 commits
-
-
Takashi Iwai authored
The commit 7cbb93d8 ("drm/ast: Use managed pci functions") converted a few PCI accessors to the managed API and dropped the manual pci_iounmap() calls, but it seems to have forgotten converting pci_iomap() to the managed one. It resulted in the leftover resources after the driver unbind. Let's fix them. Fixes: 7cbb93d8 ("drm/ast: Use managed pci functions") Signed-off-by:
-
Joseph Kogut authored
The drm_pci_alloc/free abstraction of the dma-api is no longer required, remove it. Signed-off-by:
Joseph Kogut <joseph.kogut@gmail.com> Signed-off-by:
-
Joseph Kogut authored
Remove usage of legacy dma-api abstraction in preparation for removal Signed-off-by:
-
Maxime Ripard authored
Christian needs some patches from drm/next Signed-off-by:Maxime Ripard <maxime@cerno.tech>
-
Thomas Zimmermann authored
It's only used by DRM_FBDEV_EMULATION, so inline it there. Signed-off-by:
-
Thomas Zimmermann authored
Selecting DRM_FBDEV_EMULATION will include the correct settings for fbdev emulation. Drivers should not override this. Signed-off-by:
-
Thomas Zimmermann authored
Selecting DRM_FBDEV_EMULATION will include the correct settings for fbdev emulation. Drivers should not override this. Signed-off-by:
Stefan Agner <stefan@agner.ch> Acked-by:
-
Thomas Zimmermann authored
Respect DRM's kconfig setting for fbdev console emulation. If enabled, it will select all required config options. So remove them from vmwgfx's Kconfig file. Signed-off-by:
Zack Rusin <zackr@vmware.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210415110040.23525-2-tzimmermann@suse.de
-
- 23 Apr, 2021 6 commits
-
-
Christian König authored
The alignment is a constant property and shouldn't change. v2: move documentation as well as suggested by Matthew. Signed-off-by:
Christian König <christian.koenig@amd.com> Reviewed-by:
Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210413135248.1266-4-christian.koenig@amd.com
-
Christian König authored
No functional changes, just removing the leftovers from the redesign. Signed-off-by:
-
Christian König authored
vmwgfx is the only driver actually using this. Move the handling into the driver instead. Signed-off-by:
Huang Rui <ray.huang@amd.com> Reviewed-by:
-
Shiwu Zhang authored
In case that all pre-allocated BOs are busy, just continue to populate BOs since likely half of system memory in total is still free. v4 (chk): fix code moved to VMWGFX as well Signed-off-by:
Shiwu Zhang <shiwu.zhang@amd.com> Reviewed-by:
-
Sia Jee Heng authored
Support IEC958 encoded PCM format for ADV7511 so that ADV7511 HDMI audio driver can accept the IEC958 data from the I2S input. Signed-off-by:
Sia Jee Heng <jee.heng.sia@intel.com> Reviewed-by:
Robert Foss <robert.foss@linaro.org> Signed-off-by:
-
Dave Airlie authored
Merge tag 'drm-misc-next-fixes-2021-04-22' of git://anongit.freedesktop.org/drm/drm-misc into drm-next A few fixes for the next merge window, with some build fixes for anx7625 and lt8912b bridges, incorrect error handling for lt8912b and TTM, and one fix for TTM page limit accounting. Signed-off-by:
Dave Airlie <airlied@redhat.com> From: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20210422163329.dvbuwre3akwdmzjt@gilmour
-
- 22 Apr, 2021 11 commits
-
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/ttm/ttm_device.c:42: warning: Function parameter or member 'ttm_global_mutex' not described in 'DEFINE_MUTEX' drivers/gpu/drm/ttm/ttm_device.c:42: warning: expecting prototype for ttm_global_mutex(). Prototype was for DEFINE_MUTEX() instead drivers/gpu/drm/ttm/ttm_device.c:112: warning: Function parameter or member 'ctx' not described in 'ttm_global_swapout' drivers/gpu/drm/ttm/ttm_device.c:112: warning: Function parameter or member 'gfp_flags' not described in 'ttm_global_swapout' drivers/gpu/drm/ttm/ttm_device.c:112: warning: expecting prototype for A buffer object shrink method that tries to swap out the first(). Prototype was for ttm_global_swapout() instead Cc: Christian Koenig <christian.koenig@amd.com> Cc: Huang Rui <ray.huang@amd.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel@lists.freedesktop.org Signed-off-by:
Lee Jones <lee.jones@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210416143725.2769053-28-lee.jones@linaro.orgReviewed-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/scheduler/sched_entity.c:204: warning: expecting prototype for drm_sched_entity_kill_jobs(). Prototype was for drm_sched_entity_kill_jobs_cb() instead drivers/gpu/drm/scheduler/sched_entity.c:262: warning: expecting prototype for drm_sched_entity_cleanup(). Prototype was for drm_sched_entity_fini() instead drivers/gpu/drm/scheduler/sched_entity.c:305: warning: expecting prototype for drm_sched_entity_fini(). Prototype was for drm_sched_entity_destroy() instead Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: "Christian König" <christian.koenig@amd.com> Cc: dri-devel@lists.freedesktop.org Cc: linux-media@vger.kernel.org Cc: linaro-mm-sig@lists.linaro.org Signed-off-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/ttm/ttm_bo.c:293: warning: expecting prototype for function ttm_bo_cleanup_refs(). Prototype was for ttm_bo_cleanup_refs() instead Cc: Christian Koenig <christian.koenig@amd.com> Cc: Huang Rui <ray.huang@amd.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: dri-devel@lists.freedesktop.org Cc: linux-media@vger.kernel.org Cc: linaro-mm-sig@lists.linaro.org Signed-off-by:
-
Beatriz Martins de Carvalho authored
Remove space and use tabs for indent the code to follow the Linux kernel coding conventions. Problem found by checkpatch Signed-off-by:
Beatriz Martins de Carvalho <martinsdecarvalhobeatriz@gmail.com> Signed-off-by:
-
Beatriz Martins de Carvalho authored
Remove space and use tabs for indent the code to follow the Linux kernel coding conventions. Problem found by checkpatch. Signed-off-by:
-
Beatriz Martins de Carvalho authored
Remove space and use tabs for indent the code to follow the Linux kernel coding conventions. Problem found by checkpatch. Signed-off-by:
-
Beatriz Martins de Carvalho authored
Add a new line with */ on the last line of a block comment to follow the Linux kernel coding conventions. Problem found by checkpatch. Signed-off-by:
-
Beatriz Martins de Carvalho authored
Add a new line with */ on the last line of a block comment to follow the Linux kernel coding conventions. Problem found by checkpatch. Signed-off-by:
-
Beatriz Martins de Carvalho authored
Add a new line with */ on the last line of a block comment to follow the Linux kernel coding conventions. Problem found by checkpatch. Signed-off-by:
-
Beatriz Martins de Carvalho authored
Add a new line with */ on the last line of a block comment to follow the Linux kernel coding conventions. Problem found by checkpatch. Signed-off-by:
-
Beatriz Martins de Carvalho authored
Add a new line with */ on the last line of a block comment to follow the Linux kernel coding conventions. Problem found by checkpatch. Signed-off-by:
-
- 21 Apr, 2021 4 commits
-
-
Daniel Vetter authored
I always forget where it was, store it until this gets picked up by an internship again. Cc: Wambui Karuga <wambui.karugax@gmail.com> Cc: Melissa Wen <melissa.srw@gmail.com> Acked-by:
Melissa Wen <melissa.srw@gmail.com> Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210421152911.1871473-1-daniel.vetter@ffwll.ch
-
Krzysztof Kozlowski authored
Remove trailing whitespaces. No functional change. Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by:
-
Krzysztof Kozlowski authored
Correct kerneldoc (remove wrong /** marker and adjust function name) to fix W=1 warnings: drivers/gpu/drm/gma500/cdv_intel_lvds.c:27: warning: expecting prototype for LVDS I2C backlight control macros(). Prototype was for BRIGHTNESS_MAX_LEVEL() instead drivers/gpu/drm/gma500/intel_gmbus.c:386: warning: expecting prototype for intel_gmbus_setup(). Prototype was for gma_intel_setup_gmbus() instead Signed-off-by: -
Felix Kuehling authored
Pages in SG BOs were not allocated by TTM. So don't count them against TTM's pages limit. Signed-off-by:
Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by:
-
