- 17 Jan, 2006 40 commits
-
-
Miklos Szeredi authored
Add possibility for requests to run asynchronously and call an 'end' callback when finished. With this, the special handling of the INIT and RELEASE requests can be cleaned up too. Signed-off-by:
Miklos Szeredi <miklos@szeredi.hu> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Miklos Szeredi authored
Add ability to abort a filesystem connection. With the introduction of asynchronous reads, the ability to interrupt any request is not enough to dissolve deadlocks, since now waiting for the request completion (page unlocked) is independent of the actual request, so in a deadlock all threads will be uninterruptible. The solution is to make it possible to abort all requests, even those currently undergoing I/O to/from userspace. The natural interface for this is 'mount -f mountpoint', but that only works as long as the filesystem is attached. So also add an 'abort' attribute to the sysfs view of the connection. Signed-off-by:
-
Miklos Szeredi authored
This patch adds the 'waiting' attribute which indicates how many filesystem requests are currently waiting to be completed. A non-zero value without any filesystem activity indicates a hung or deadlocked filesystem. Signed-off-by:
-
Miklos Szeredi authored
Kobjectify fuse_conn, and make it visible under /sys/fs/fuse/connections. Lacking any natural naming, connections are numbered. This patch doesn't add any attributes, just the infrastructure. Signed-off-by:
-
Miklos Szeredi authored
The ->connected flag for a fuse_conn object previously only indicated whether the device file for this connection is currently open or not. Change it's meaning so that it indicates whether the connection is active or not: now either umount or device release will clear the flag. The separate ->mounted flag is still needed for handling background requests. Signed-off-by:
-
Miklos Szeredi authored
Create a new list for requests in the process of being transfered to/from userspace. This will be needed to be able to abort all requests even those currently under I/O Signed-off-by:
-
Miklos Szeredi authored
The state of request was made up of 2 bitfields (->sent and ->finished) and of the fact that the request was on a list or not. Unify this into a single state field. Signed-off-by:
-
Miklos Szeredi authored
- remove some unneeded assignments - use kzalloc instead of kmalloc + memset - simplify setting sb->s_fs_info - in fuse_send_init() use fuse_get_request() instead of do_get_request() helper Signed-off-by:
-
Miklos Szeredi authored
Inline keyword is unnecessary in most cases. Clean them up. Signed-off-by:
-
Miklos Szeredi authored
Handle the case when the INIT request is answered with an error. Signed-off-by:
-
Miklos Szeredi authored
This function used the request object after decrementing its reference count and releasing the lock. This could in theory lead to all sorts of problems. Fix and simplify at the same time. Signed-off-by:
-
Miklos Szeredi authored
fuse_copy_finish() must be called before request_end(), since the later might sleep, and no sleeping is allowed between fuse_copy_one() and fuse_copy_finish() because of kmap_atomic()/kunmap_atomic() used in them. Signed-off-by:
-
Miklos Szeredi authored
This patch adds an empty /sys/fs, which filesystems can use. Signed-off-by:
-
Bob Copeland authored
The Rio Karma portable MP3 player has its own proprietary partition table. The partition layout is similar to a DOS boot sector but it begins at a different offset and uses a different magic number (0xAB56 instead of 0xAA55). Add support for it to enable mounting the device. Signed-off-by:
Bob Copeland <me@bobcopeland.com> Signed-off-by:
-
Paul Mundt authored
Currently the CPU subtype options are cluttering up arch/sh/Kconfig somewhat. Given that, this moves all of that in to its own arch/sh/mm/Kconfig. Things like cache configuration are also moved to this new location. This also adds support for strict CPU tuning on newer cores, which requires the addition of as-option. Signed-off-by:
Paul Mundt <lethal@linux-sh.org> Signed-off-by:
-
Paul Mundt authored
This builds on some of the clock framework code to support a simple system timer interface. Signed-off-by:
-
Paul Mundt authored
This adds a relatively simplistic clock framework for sh. The initial goal behind this is to clean up the arch/sh/kernel/time.c mess and to get the CPU subtype-specific frequency setting and calculation code moved somewhere more sensible. This only deals with the core clocks at the moment, though it's trivial for other drivers to define their own clocks as desired. Signed-off-by:
-
Paul Mundt authored
This introduces a few changes in the way that the I/O routines are defined on SH, specifically so that things like the iomap API properly wrap through the machvec for board-specific quirks. In addition to this, the old p3_ioremap() work is converted to a more generic __ioremap() that will map through the PMB if it's available, or fall back on page tables for everything else. An alpha-like IO_CONCAT is also added so we can start to clean up the board-specific io.h mess, which will be handled in board update patches.. Signed-off-by:
-
Paul Mundt authored
This moves the various IRQ controller drivers into a new subdirectory, and also extends the INTC2 IRQ handler to also deal with SH7760 and SH7780 interrupts, rather than just ST-40. The old CONFIG_SH_GENERIC has also been removed from the IRQ definitions, as new ports are expected to be based off of CONFIG_SH_UNKNOWN. Since there are plenty of incompatible machvecs, CONFIG_SH_GENERIC doesn't make sense anymore. Signed-off-by:
-
kogiidena authored
This adds kexec() support for SH. Signed-off-by:
kogiidena <kogiidena@eggplant.ddo.jp> Signed-off-by:
-
Paul Mundt authored
This extends the current SH DMA API somewhat to support a proper virtual channel abstraction, and also works to represent this through the driver model by giving each DMAC its own platform device. There's also a few other minor changes to support a few new CPU subtypes, and make TEI generation for the SH DMAC configurable. Signed-off-by:
-
Paul Mundt authored
Most of the reasons for keeping these separate before was due to hp690 discontig, and since we have a workaround for that now (abusing some shadow space so everything is magically contiguous), there's no reason to keep the targets separate. Signed-off-by:
-
Christoph Hellwig authored
After ages my fb ioctl prototype cleanup finally got in. Unfortunately the patch are so old that the sbus compat_ioctl helper didn't exist back then, so it's not covered. This patch should fix that issue. Signed-off-by:
Christoph Hellwig <hch@lst.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by:
-
Alexey Dobriyan authored
Signed-off-by:
Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by:
Ian Molton <spyro@f2s.com> Signed-off-by:
-
Yoichi Yuasa authored
Adds pm_power_off() to MIPS. Signed-off-by:
Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
Ingo Molnar authored
There's incorrect spinlock usage in espserial_init(): autoconfig() uses info->lock before it's initialized. The fix is to initialize the spinlock earlier. Signed-off-by:
Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
Adrian Bunk authored
Build kernel/intermodule.c only when required. Signed-off-by:
Adrian Bunk <bunk@stusta.de> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: David Woodhouse <dwmw2@infradead.org> Signed-off-by:
-
Adrian Bunk authored
This patch removes the wrong dependency of MTD_OBSOLETE_CHIPS on BROKEN and marks the non-compiling MTD_AMDSTD and MTD_JEDEC drivers as BROKEN. Signed-off-by:
David Woodhouse <dwmw2@infradead.org> Signed-off-by:
-
Alexey Dobriyan authored
It's trying to "continue;" in "if" statement. Signed-off-by:
-
Alexey Dobriyan authored
Fix reiserfs compilation as a side effect =) Signed-off-by:
-
Adrian Bunk authored
arm26 currently has a 256 kB THREAD_SIZE (sic). Looking at the comment in the code, this seems to be based on a misunderstanding. The comment says: this needs attention (see kernel/fork.c which gets a nice div by zero if this is lower than 8*32768 kernel/fork.c does: max_threads = mempages / (8 * THREAD_SIZE / PAGE_SIZE) Therefore, a division by 0 is impossible for all reasonable cases with THREAD_SIZE >= PAGE_SIZE. Since the minimum PAGE_SIZE Linux uses on the arm26 architecture is 16k, PAGE_SIZE should be sufficient for THREAD_SIZE. Signed-off-by:
-
Adrian Bunk authored
Since we do no longer support any gcc < 3.0, there's no need to check for it.. Signed-off-by:
-
-
Jonathan Corbet authored
Fix a comment which missed an update cycle somewhere. Signed-off-by:
Jonathan Corbet <corbet@lwn.net> Signed-off-by:
-
-
Jens Axboe authored
Looks like fallout from the geo stuff.
-
Linus Torvalds authored
-
Tony Luck authored
-
Prarit Bhargava authored
Replace uintX_t declarations with uX declarations. Replace intX_t declarations with sX declarations. Signed-off-by:
Prarit Bhargava <prarit@sgi.com> Signed-off-by:
Tony Luck <tony.luck@intel.com>
-
Jody McIntyre authored
The feature removal was done in 7301c8d3 but these files were not removed for some reason. Signed-off-by:
Jody McIntyre <scjody@modernduck.com>
-
