When we cancel SQPOLL, @task in io_uring_try_cancel_requests() will
differ from current. Use the right tctx from passed in @task, and don't
forget that it can be NULL when the io_uring ctx exits.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

We no longer revert the iovec on -EIOCBQUEUED, see commit ab2125df,
and this started causing issues for IOPOLL on devies that run out of
request slots. Turns out what outside of needing a revert for those, we
also had a bug where we didn't properly setup retry inside the submission
path. That could cause re-import of the iovec, if any, and that could lead
to spurious results if the application had those allocated on the stack.

Catch -EAGAIN retry and make the iovec stable for IOPOLL, just like we do
for !IOPOLL retries.

Cc: <stable@vger.kernel.org> # 5.9+
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Reported-by: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

The 'err' path should include the hash put, we already grabbed a reference
once we get that far.

Fixes: e941894e ("io-wq: make buffered file write hashed work map per-ctx")
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Now, sqo_task is used only for a warning that is not interesting anymore
since sqo_dead is gone, remove all of that including ctx->sqo_task.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

As SQPOLL task doesn't poke into ->sqo_task anymore, there is no need to
kill the sqo when the master task exits. Before it was necessary to
avoid races accessing sqo_task->files with removing them.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
[axboe: don't forget to enable SQPOLL before exit, if started disabled]
Signed-off-by: Jens Axboe <axboe@kernel.dk>

syzbot reports a deadlock, attempting to lock the same spinlock twice:

============================================
WARNING: possible recursive locking detected
5.11.0-syzkaller #0 Not tainted
--------------------------------------------
swapper/1/0 is trying to acquire lock:
ffff88801b2b1130 (&runtime->sleep){..-.}-{2:2}, at: spin_lock include/linux/spinlock.h:354 [inline]
ffff88801b2b1130 (&runtime->sleep){..-.}-{2:2}, at: io_poll_double_wake+0x25f/0x6a0 fs/io_uring.c:4960

but task is already holding lock:
ffff88801b2b3130 (&runtime->sleep){..-.}-{2:2}, at: __wake_up_common_lock+0xb4/0x130 kernel/sched/wait.c:137

other info that might help us debug this:
 Possible unsafe locking scenario:

       CPU0
       ----
  lock(&runtime->sleep);
  lock(&runtime->sleep);

 *** DEADLOCK ***

 May be due to missing lock nesting notation

2 locks held by swapper/1/0:
 #0: ffff888147474908 (&group->lock){..-.}-{2:2}, at: _snd_pcm_stream_lock_irqsave+0x9f/0xd0 sound/core/pcm_native.c:170
 #1: ffff88801b2b3130 (&runtime->sleep){..-.}-{2:2}, at: __wake_up_common_lock+0xb4/0x130 kernel/sched/wait.c:137

stack backtrace:
CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.11.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 <IRQ>
 __dump_stack lib/dump_stack.c:79 [inline]
 dump_stack+0xfa/0x151 lib/dump_stack.c:120
 print_deadlock_bug kernel/locking/lockdep.c:2829 [inline]
 check_deadlock kernel/locking/lockdep.c:2872 [inline]
 validate_chain kernel/locking/lockdep.c:3661 [inline]
 __lock_acquire.cold+0x14c/0x3b4 kernel/locking/lockdep.c:4900
 lock_acquire kernel/locking/lockdep.c:5510 [inline]
 lock_acquire+0x1ab/0x730 kernel/locking/lockdep.c:5475
 __raw_spin_lock include/linux/spinlock_api_smp.h:142 [inline]
 _raw_spin_lock+0x2a/0x40 kernel/locking/spinlock.c:151
 spin_lock include/linux/spinlock.h:354 [inline]
 io_poll_double_wake+0x25f/0x6a0 fs/io_uring.c:4960
 __wake_up_common+0x147/0x650 kernel/sched/wait.c:108
 __wake_up_common_lock+0xd0/0x130 kernel/sched/wait.c:138
 snd_pcm_update_state+0x46a/0x540 sound/core/pcm_lib.c:203
 snd_pcm_update_hw_ptr0+0xa75/0x1a50 sound/core/pcm_lib.c:464
 snd_pcm_period_elapsed+0x160/0x250 sound/core/pcm_lib.c:1805
 dummy_hrtimer_callback+0x94/0x1b0 sound/drivers/dummy.c:378
 __run_hrtimer kernel/time/hrtimer.c:1519 [inline]
 __hrtimer_run_queues+0x609/0xe40 kernel/time/hrtimer.c:1583
 hrtimer_run_softirq+0x17b/0x360 kernel/time/hrtimer.c:1600
 __do_softirq+0x29b/0x9f6 kernel/softirq.c:345
 invoke_softirq kernel/softirq.c:221 [inline]
 __irq_exit_rcu kernel/softirq.c:422 [inline]
 irq_exit_rcu+0x134/0x200 kernel/softirq.c:434
 sysvec_apic_timer_interrupt+0x93/0xc0 arch/x86/kernel/apic/apic.c:1100
 </IRQ>
 asm_sysvec_apic_timer_interrupt+0x12/0x20 arch/x86/include/asm/idtentry.h:632
RIP: 0010:native_save_fl arch/x86/include/asm/irqflags.h:29 [inline]
RIP: 0010:arch_local_save_flags arch/x86/include/asm/irqflags.h:70 [inline]
RIP: 0010:arch_irqs_disabled arch/x86/include/asm/irqflags.h:137 [inline]
RIP: 0010:acpi_safe_halt drivers/acpi/processor_idle.c:111 [inline]
RIP: 0010:acpi_idle_do_entry+0x1c9/0x250 drivers/acpi/processor_idle.c:516
Code: dd 38 6e f8 84 db 75 ac e8 54 32 6e f8 e8 0f 1c 74 f8 e9 0c 00 00 00 e8 45 32 6e f8 0f 00 2d 4e 4a c5 00 e8 39 32 6e f8 fb f4 <9c> 5b 81 e3 00 02 00 00 fa 31 ff 48 89 de e8 14 3a 6e f8 48 85 db
RSP: 0018:ffffc90000d47d18 EFLAGS: 00000293
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
RDX: ffff8880115c3780 RSI: ffffffff89052537 RDI: 0000000000000000
RBP: ffff888141127064 R08: 0000000000000001 R09: 0000000000000001
R10: ffffffff81794168 R11: 0000000000000000 R12: 0000000000000001
R13: ffff888141127000 R14: ffff888141127064 R15: ffff888143331804
 acpi_idle_enter+0x361/0x500 drivers/acpi/processor_idle.c:647
 cpuidle_enter_state+0x1b1/0xc80 drivers/cpuidle/cpuidle.c:237
 cpuidle_enter+0x4a/0xa0 drivers/cpuidle/cpuidle.c:351
 call_cpuidle kernel/sched/idle.c:158 [inline]
 cpuidle_idle_call kernel/sched/idle.c:239 [inline]
 do_idle+0x3e1/0x590 kernel/sched/idle.c:300
 cpu_startup_entry+0x14/0x20 kernel/sched/idle.c:397
 start_secondary+0x274/0x350 arch/x86/kernel/smpboot.c:272
 secondary_startup_64_no_verify+0xb0/0xbb

which is due to the driver doing poll_wait() twice on the same
wait_queue_head. That is perfectly valid, but from checking the rest
of the kernel tree, it's the only driver that does this.

We can handle this just fine, we just need to ignore the second addition
as we'll get woken just fine on the first one.

Cc: stable@vger.kernel.org # 5.8+
Fixes: 18bceab1 ("io_uring: allow POLL_ADD with double poll_wait() users")
Reported-by: syzbot+28abd693db9e92c160d8@syzkaller.appspotmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

If we create it in a disabled state because IORING_SETUP_R_DISABLED is
set on ring creation, we need to ensure that we've kicked the thread if
we're exiting before it's been explicitly disabled. Otherwise we can run
into a deadlock where exit is waiting go park the SQPOLL thread, but the
SQPOLL thread itself is waiting to get a signal to start.

That results in the below trace of both tasks hung, waiting on each other:

INFO: task syz-executor458:8401 blocked for more than 143 seconds.
      Not tainted 5.11.0-next-20210226-syzkaller #0
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:syz-executor458 state:D stack:27536 pid: 8401 ppid:  8400 flags:0x00004004
Call Trace:
 context_switch kernel/sched/core.c:4324 [inline]
 __schedule+0x90c/0x21a0 kernel/sched/core.c:5075
 schedule+0xcf/0x270 kernel/sched/core.c:5154
 schedule_timeout+0x1db/0x250 kernel/time/timer.c:1868
 do_wait_for_common kernel/sched/completion.c:85 [inline]
 __wait_for_common kernel/sched/completion.c:106 [inline]
 wait_for_common kernel/sched/completion.c:117 [inline]
 wait_for_completion+0x168/0x270 kernel/sched/completion.c:138
 io_sq_thread_park fs/io_uring.c:7115 [inline]
 io_sq_thread_park+0xd5/0x130 fs/io_uring.c:7103
 io_uring_cancel_task_requests+0x24c/0xd90 fs/io_uring.c:8745
 __io_uring_files_cancel+0x110/0x230 fs/io_uring.c:8840
 io_uring_files_cancel include/linux/io_uring.h:47 [inline]
 do_exit+0x299/0x2a60 kernel/exit.c:780
 do_group_exit+0x125/0x310 kernel/exit.c:922
 __do_sys_exit_group kernel/exit.c:933 [inline]
 __se_sys_exit_group kernel/exit.c:931 [inline]
 __x64_sys_exit_group+0x3a/0x50 kernel/exit.c:931
 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
 entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x43e899
RSP: 002b:00007ffe89376d48 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7
RAX: ffffffffffffffda RBX: 00000000004af2f0 RCX: 000000000043e899
RDX: 000000000000003c RSI: 00000000000000e7 RDI: 0000000000000000
RBP: 0000000000000000 R08: ffffffffffffffc0 R09: 0000000010000000
R10: 0000000000008011 R11: 0000000000000246 R12: 00000000004af2f0
R13: 0000000000000001 R14: 0000000000000000 R15: 0000000000000001
INFO: task iou-sqp-8401:8402 can't die for more than 143 seconds.
task:iou-sqp-8401    state:D stack:30272 pid: 8402 ppid:  8400 flags:0x00004004
Call Trace:
 context_switch kernel/sched/core.c:4324 [inline]
 __schedule+0x90c/0x21a0 kernel/sched/core.c:5075
 schedule+0xcf/0x270 kernel/sched/core.c:5154
 schedule_timeout+0x1db/0x250 kernel/time/timer.c:1868
 do_wait_for_common kernel/sched/completion.c:85 [inline]
 __wait_for_common kernel/sched/completion.c:106 [inline]
 wait_for_common kernel/sched/completion.c:117 [inline]
 wait_for_completion+0x168/0x270 kernel/sched/completion.c:138
 io_sq_thread+0x27d/0x1ae0 fs/io_uring.c:6717
 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:294
INFO: task iou-sqp-8401:8402 blocked for more than 143 seconds.

Reported-by: syzbot+fb5458330b4442f2090d@syzkaller.appspotmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

io_run_ctx_fallback() can use xchg() instead of cmpxchg(). It's simpler
and faster.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

There is an unlikely but possible race using a freed context. That's
because req->task_work.func() can free a request, but we won't
necessarily find a completion in submit_state.comp and so all ctx refs
may be put by the time we do mutex_lock(&ctx->uring_ctx);

There are several reasons why it can miss going through
submit_state.comp: 1) req->task_work.func() didn't complete it itself,
but punted to iowq (e.g. reissue) and it got freed later, or a similar
situation with it overflowing and getting flushed by someone else, or
being submitted to IRQ completion, 2) As we don't hold the uring_lock,
someone else can do io_submit_flush_completions() and put our ref.
3) Bugs and code obscurities, e.g. failing to propagate issue_flags
properly.

One example is as follows

  CPU1                                  |  CPU2
=======================================================================
@req->task_work.func()                  |
  -> @req overflwed,                    |
     so submit_state.comp,nr==0         |
                                        | flush overflows, and free @req
                                        | ctx refs == 0, free it
ctx is dead, but we do                  |
	lock + flush + unlock           |

So take a ctx reference for each new ctx we see in __tctx_task_work(),
and do release it until we do all our flushing.

Fixes: 65453d1e ("io_uring: enable req cache for task_work items")
Reported-by: syzbot+a157ac7c03a56397f553@syzkaller.appspotmail.com
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
[axboe: fold in my one-liner and fix ref mismatch]
Signed-off-by: Jens Axboe <axboe@kernel.dk>

This was always a weird work-around or file referencing, and we don't
need it anymore. Get rid of it.
Signed-off-by: Jens Axboe <axboe@kernel.dk>

We already run the fallback task_work in io_uring_try_cancel_requests(),
no need to duplicate at ring exit explicitly.
Signed-off-by: Jens Axboe <axboe@kernel.dk>

If we move it in there, then we no longer have to care about it in io-wq.
This means we can drop the cred handling in io-wq, and we can drop the
REQ_F_WORK_INITIALIZED flag and async init functions as that was the last
user of it since we moved to the new workers. Then we can also drop
io_wq_work->creds, and just hold the personality u16 in there instead.
Suggested-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

We're no longer checking anything that requires the work item to be
initialized, as we're not carrying any file related state there.
Signed-off-by: Jens Axboe <axboe@kernel.dk>

We prune the full cache regardless, get rid of the dead argument.
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Destroy current's io-wq backend and tctx on __io_uring_task_cancel(),
aka exec(). Looks it's not strictly necessary, because it will be done
at some point when the task dies and changes of creds/files/etc. are
handled, but better to do that earlier to free io-wq and not potentially
lock previous mm and other resources for the time being.

It's safe to do because we wait for all requests of the current task to
complete, so no request will use tctx afterwards. Note, that
io_uring_files_cancel() may leave some requests for later reaping, so it
leaves tctx intact, that's ok as the task is dying anyway.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Make sure that we killed an io-wq by the time a task is dead.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

We clear the bit marking the ctx task_work as active after having run
the queued work, but we really should be clearing it before. Otherwise
we can hit a tiny race ala:

CPU0					CPU1
io_task_work_add()			tctx_task_work()
					run_work
	add_to_list
	test_and_set_bit
					clear_bit
		already set

and CPU0 will return thinking the task_work is queued, while in reality
it's already being run. If we hit the condition after __tctx_task_work()
found no more work, but before we've cleared the bit, then we'll end up
thinking it's queued and will be run. In reality it is queued, but we
didn't queue the ctx task_work to ensure that it gets run.

Fixes: 7cbf1722 ("io_uring: provide FIFO ordering for task_work")
Signed-off-by: Jens Axboe <axboe@kernel.dk>

If we put the io-wq from io_uring, we really want it to exit. Provide
a helper that does that for us. Couple that with not having the manager
hold a reference to the 'wq' and the normal SQPOLL exit will tear down
the io-wq context appropriate.

On the io-wq side, our wq context is per task, so only the task itself
is manipulating ->manager and hence it's safe to check and clear without
any extra locking. We just need to ensure that the manager task stays
around, in case it exits.
Signed-off-by: Jens Axboe <axboe@kernel.dk>

We want to reuse this completion, and a single complete should do just
fine. Ensure that we park ourselves first if requested, as that is what
lead to the initial deadlock in this area. If we've got someone attempting
to park us, then we can't proceed without having them finish first.

Fixes: 37d1e2e3 ("io_uring: move SQPOLL thread io-wq forked worker")
Signed-off-by: Jens Axboe <axboe@kernel.dk>

io_uring_try_cancel_requests() matches not only current's requests, but
also of other exiting tasks, so we need to actively cancel them and not
just wait, especially since the function can be called on flush during
do_exit() -> exit_files().
Even if it's not a problem for now, it's much nicer to know that the
function tries to cancel everything it can.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

If we fail to fork an SQPOLL worker, we can hit cancel, and hence
attempted thread stop, with the thread already being stopped. Ensure
we check for that.

Also guard thread stop fully by the sqd mutex, just like we do for
park.
Signed-off-by: Jens Axboe <axboe@kernel.dk>

We are already freeing the wq struct in both spots, so don't put it and
get it freed twice.

Reported-by: syzbot+7bf785eedca35ca05501@syzkaller.appspotmail.com
Fixes: 4fb6ac32 ("io-wq: improve manager/worker handling over exec")
Signed-off-by: Jens Axboe <axboe@kernel.dk>

The manager waits for the workers, hence the manager is always valid if
workers are running. Now also have wq destroy wait for the manager on
exit, so we now everything is gone.
Signed-off-by: Jens Axboe <axboe@kernel.dk>

This is a leftover from a different use cases, it's used to wait for
the manager to startup. Rename it as such.
Signed-off-by: Jens Axboe <axboe@kernel.dk>

If we're in the process of shutting down the async context, then don't
create new workers if we already have at least the fixed one.
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Instead of having to wait separately on workers and manager, just have
the manager wait on the workers. We use an atomic_t for the reference
here, as we need to start at 0 and allow increment from that. Since the
number of workers is naturally capped by the allowed nr of processes,
and that uses an int, there is no risk of overflow.
Signed-off-by: Jens Axboe <axboe@kernel.dk>

We need to have our worker count updated before continuing, to avoid
cases where we repeatedly think we need a new worker, but a fork is
already in progress.
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Pull ide fix from Jens Axboe:
 "This is a leftover fix from 5.11, where I forgot to ship it your way"

* tag 'ide-5.11-2021-02-28' of git://git.kernel.dk/linux-block:
  ide/falconide: Fix module unload

Merge tag 'kbuild-fixes-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - Fix UNUSED_KSYMS_WHITELIST for Clang LTO

 - Make -s builds really silent irrespective of V= option

 - Fix build error when SUBLEVEL or PATCHLEVEL is empty

* tag 'kbuild-fixes-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kbuild: Fix <linux/version.h> for empty SUBLEVEL or PATCHLEVEL again
  kbuild: make -s option take precedence over V=1
  ia64: remove redundant READELF from arch/ia64/Makefile
  kbuild: do not include include/config/auto.conf from adjust_autoksyms.sh
  kbuild: fix UNUSED_KSYMS_WHITELIST for Clang LTO
  kbuild: lto: add _mcount to list of used symbols

Pull arch/csky updates from Guo Ren:
 "Features:
   - add new memory layout 2.5G(user):1.5G(kernel)
   - add kmemleak support
   - reconstruct VDSO framework: add VDSO with GENERIC_GETTIMEOFDAY,
     GENERIC_TIME_VSYSCALL, HAVE_GENERIC_VDSO
   - add faulthandler_disabled() check
   - support (fix) swapon
   - add (fix) _PAGE_ACCESSED for default pgprot
   - abort uaccess retries upon fatal signal (from arm)

  Fixes and optimizations:
   - fix perf probe failure
   - fix show_regs doesn't contain regs->usp
   - remove custom asm/atomic.h implementation
   - fix barrier design
   - fix futex SMP implementation
   - fix asm/cmpxchg.h with correct ordering barrier
   - cleanup asm/spinlock.h
   - fix PTE global for 2.5:1.5 virtual memory
   - remove prologue of page fault handler in entry.S
   - fix TLB maintenance synchronization problem
   - add show_tlb for CPU_CK860 debug
   - fix FAULT_FLAG_XXX param for handle_mm_fault
   - fix update_mmu_cache called with user io mapping
   - fix do_page_fault parent irq status
   - fix a size determination in gpr_get()
   - pgtable.h: Coding convention
   - kprobe: Fix code in simulate without 'long'
   - fix pfn_valid error with wrong max_mapnr
   - use free_initmem_default() in free_initmem()
   - fix compile error"

* tag 'csky-for-linus-5.12-rc1' of git://github.com/c-sky/csky-linux: (30 commits)
  csky: Fixup compile error
  csky: use free_initmem_default() in free_initmem()
  csky: Fixup pfn_valid error with wrong max_mapnr
  csky: Add VDSO with GENERIC_GETTIMEOFDAY, GENERIC_TIME_VSYSCALL, HAVE_GENERIC_VDSO
  csky: kprobe: Fixup code in simulate without 'long'
  csky: Fixup swapon
  csky: pgtable.h: Coding convention
  csky: Fixup _PAGE_ACCESSED for default pgprot
  csky: remove unused including <linux/version.h>
  csky: Fix a size determination in gpr_get()
  csky: Reconstruct VDSO framework
  csky: mm: abort uaccess retries upon fatal signal
  csky: Sync riscv mm/fault.c for easy maintenance
  csky: Fixup do_page_fault parent irq status
  csky: Add faulthandler_disabled() check
  csky: Fixup update_mmu_cache called with user io mapping
  csky: Fixup FAULT_FLAG_XXX param for handle_mm_fault
  csky: Add show_tlb for CPU_CK860 debug
  csky: Fix TLB maintenance synchronization problem
  csky: Add kmemleak support
  ...

Pull more RISC-V updates from Palmer Dabbelt:
 "A pair of patches that slipped through the cracks:

   - enable CPU hotplug in the defconfigs

   - some cleanups to setup_bootmem

  There's also a single fix for some randconfig build failures:

   - make NUMA depend on SMP"

* tag 'riscv-for-linus-5.12-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: Cleanup setup_bootmem()
  RISC-V: Enable CPU Hotplug in defconfigs
  RISC-V: Make NUMA depend on SMP

Pull more SCSI updates from James Bottomley:
 "This is a few driver updates (iscsi, mpt3sas) that were still in the
  staging queue when the merge window opened (all committed on or before
  8 Feb) and some small bug fixes which came in during the merge window
  (all committed on 22 Feb)"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (30 commits)
  scsi: hpsa: Correct dev cmds outstanding for retried cmds
  scsi: sd: Fix Opal support
  scsi: target: tcmu: Fix memory leak caused by wrong uio usage
  scsi: target: tcmu: Move some functions without code change
  scsi: sd: sd_zbc: Don't pass GFP_NOIO to kvcalloc
  scsi: aic7xxx: Remove unused function pointer typedef ahc_bus_suspend/resume_t
  scsi: bnx2fc: Fix Kconfig warning & CNIC build errors
  scsi: ufs: Fix a duplicate dev quirk number
  scsi: aic79xx: Fix spelling of version
  scsi: target: core: Prevent underflow for service actions
  scsi: target: core: Add cmd length set before cmd complete
  scsi: iscsi: Drop session lock in iscsi_session_chkready()
  scsi: qla4xxx: Use iscsi_is_session_online()
  scsi: libiscsi: Reset max/exp cmdsn during recovery
  scsi: iscsi_tcp: Fix shost can_queue initialization
  scsi: libiscsi: Add helper to calculate max SCSI cmds per session
  scsi: libiscsi: Fix iSCSI host workq destruction
  scsi: libiscsi: Fix iscsi_task use after free()
  scsi: libiscsi: Drop taskqueuelock
  scsi: libiscsi: Fix iscsi_prep_scsi_cmd_pdu() error handling
  ...

Pull more xfs updates from Darrick Wong:
 "The most notable fix here prevents premature reuse of freed metadata
  blocks, and adding the ability to detect accidental nested
  transactions, which are not allowed here.

   - Restore a disused sysctl control knob that was inadvertently
     dropped during the merge window to avoid fstests regressions.

   - Don't speculatively release freed blocks from the busy list until
     we're actually allocating them, which fixes a rare log recovery
     regression.

   - Don't nest transactions when scanning for free space.

   - Add an idiot^Wmaintainer light to detect nested transactions. ;)"

* tag 'xfs-5.12-merge-6' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: use current->journal_info for detecting transaction recursion
  xfs: don't nest transactions when scanning for eofblocks
  xfs: don't reuse busy extents on extent trim
  xfs: restore speculative_cow_prealloc_lifetime sysctl

Pull more block updates from Jens Axboe:
 "A few stragglers (and one due to me missing it originally), and fixes
  for changes in this merge window mostly. In particular:

   - blktrace cleanups (Chaitanya, Greg)

   - Kill dead blk_pm_* functions (Bart)

   - Fixes for the bio alloc changes (Christoph)

   - Fix for the partition changes (Christoph, Ming)

   - Fix for turning off iopoll with polled IO inflight (Jeffle)

   - nbd disconnect fix (Josef)

   - loop fsync error fix (Mauricio)

   - kyber update depth fix (Yang)

   - max_sectors alignment fix (Mikulas)

   - Add bio_max_segs helper (Matthew)"

* tag 'block-5.12-2021-02-27' of git://git.kernel.dk/linux-block: (21 commits)
  block: Add bio_max_segs
  blktrace: fix documentation for blk_fill_rw()
  block: memory allocations in bounce_clone_bio must not fail
  block: remove the gfp_mask argument to bounce_clone_bio
  block: fix bounce_clone_bio for passthrough bios
  block-crypto-fallback: use a bio_set for splitting bios
  block: fix logging on capacity change
  blk-settings: align max_sectors on "logical_block_size" boundary
  block: reopen the device in blkdev_reread_part
  block: don't skip empty device in in disk_uevent
  blktrace: remove debugfs file dentries from struct blk_trace
  nbd: handle device refs for DESTROY_ON_DISCONNECT properly
  kyber: introduce kyber_depth_updated()
  loop: fix I/O error on fsync() in detached loop devices
  block: fix potential IO hang when turning off io_poll
  block: get rid of the trace rq insert wrapper
  blktrace: fix blk_rq_merge documentation
  blktrace: fix blk_rq_issue documentation
  blktrace: add blk_fill_rwbs documentation comment
  block: remove superfluous param in blk_fill_rwbs()
  ...

Commit 78d3bb44 ("kbuild: Fix <linux/version.h> for empty SUBLEVEL
or PATCHLEVEL") fixed the build error for empty SUBLEVEL or PATCHLEVEL
by prepending a zero.

Commit 9b82f13e ("kbuild: clamp SUBLEVEL to 255") re-introduced
this issue.

This time, we cannot take the same approach because we have C code:

  #define LINUX_VERSION_PATCHLEVEL $(PATCHLEVEL)
  #define LINUX_VERSION_SUBLEVEL $(SUBLEVEL)

Replace empty SUBLEVEL/PATCHLEVEL with a zero.

Fixes: 9b82f13e ("kbuild: clamp SUBLEVEL to 255")
Reported-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-and-tested-by: Sasha Levin <sashal@kernel.org>

'make -s' should be really silent. However, 'make -s V=1' prints noisy
log messages from some shell scripts.

Of course, such a combination is odd, but the build system needs to do
the right thing even if a user gives strange input.

If -s is given, KBUILD_VERBOSE should be forced to 0.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

READELF is defined by the top Makefile.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Commit cd195bc4 ("kbuild: split adjust_autoksyms.sh in two parts")
split out the code that needs include/config/auto.conf.

This script no longer needs to include include/config/auto.conf.

Fixes: cd195bc4 ("kbuild: split adjust_autoksyms.sh in two parts")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Commit fbe078d3 ("kbuild: lto: add a default list of used symbols")
does not work as expected if the .config file has already specified
CONFIG_UNUSED_KSYMS_WHITELIST="my/own/white/list" before enabling
CONFIG_LTO_CLANG.

So, the user-supplied whitelist and LTO-specific white list must be
independent of each other.

I refactored the shell script so CONFIG_MODVERSIONS and CONFIG_CLANG_LTO
handle whitelists in the same way.

Fixes: fbe078d3 ("kbuild: lto: add a default list of used symbols")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>