1. 22 Jul, 2010 4 commits
  2. 21 Jul, 2010 4 commits
  3. 20 Jul, 2010 1 commit
  4. 19 Jul, 2010 2 commits
  5. 18 Jul, 2010 1 commit
    • Arnaud Ebalard's avatar
      IPv6: fix CoA check in RH2 input handler (mip6_rthdr_input()) · d9a9dc66
      Arnaud Ebalard authored
      The input handler for Type 2 Routing Header (mip6_rthdr_input())
      checks if the CoA in the packet matches the CoA in the XFRM state.
      
      Current check is buggy: it compares the adddress in the Type 2
      Routing Header, i.e. the HoA, against the expected CoA in the state.
      The comparison should be made against the address in the destination
      field of the IPv6 header.
      
      The bug remained unnoticed because the main (and possibly only current)
      user of the code (UMIP MIPv6 Daemon) initializes the XFRM state with the
      unspecified address, i.e. explicitly allows everything.
      
      Yoshifuji-san, can you ack that one?
      Signed-off-by: default avatarArnaud Ebalard <arno@natisbad.org>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      d9a9dc66
  6. 16 Jul, 2010 5 commits
    • Robert Jennings's avatar
      ibmveth: lost IRQ while closing/opening device leads to service loss · ee2e6114
      Robert Jennings authored
      The order of freeing the IRQ and freeing the device in firmware
      in ibmveth_close can cause the adapter to become unusable after a
      subsequent ibmveth_open.  Only a reboot of the OS will make the
      network device usable again. This is seen when cycling the adapter
      up and down while there is network activity.
      
      There is a window where an IRQ will be left unserviced (H_EOI will not
      be called).  The solution is to make a VIO_IRQ_DISABLE h_call, free the
      device with firmware, and then call free_irq.
      Signed-off-by: default avatarRobert Jennings <rcj@linux.vnet.ibm.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      ee2e6114
    • David S. Miller's avatar
    • Stephen Boyd's avatar
      rt2x00: Fix lockdep warning in rt2x00lib_probe_dev() · 9acd56d3
      Stephen Boyd authored
      The rt2x00dev->intf_work workqueue is never initialized when a driver is
      probed for a non-existent device (in this case rt2500usb). On such a
      path we call rt2x00lib_remove_dev() to free any resources initialized
      during the probe before we use INIT_WORK to initialize the workqueue.
      This causes lockdep to get confused since the lock used in the workqueue
      hasn't been initialized yet but is now being acquired during
      cancel_work_sync() called by rt2x00lib_remove_dev().
      
      Fix this by initializing the workqueue first before we attempt to probe
      the device. This should make lockdep happy and avoid breaking any
      assumptions about how the library cleans up after a probe fails.
      
      phy0 -> rt2x00lib_probe_dev: Error - Failed to allocate device.
      INFO: trying to register non-static key.
      the code is fine but needs lockdep annotation.
      turning off the locking correctness validator.
      Pid: 2027, comm: modprobe Not tainted 2.6.35-rc5+ #60
      Call Trace:
       [<ffffffff8105fe59>] register_lock_class+0x152/0x31f
       [<ffffffff81344a00>] ? usb_control_msg+0xd5/0x111
       [<ffffffff81061bde>] __lock_acquire+0xce/0xcf4
       [<ffffffff8105f6fd>] ? trace_hardirqs_off+0xd/0xf
       [<ffffffff81492aef>] ?  _raw_spin_unlock_irqrestore+0x33/0x41
       [<ffffffff810628d5>] lock_acquire+0xd1/0xf7
       [<ffffffff8104f037>] ? __cancel_work_timer+0x99/0x17e
       [<ffffffff8104f06e>] __cancel_work_timer+0xd0/0x17e
       [<ffffffff8104f037>] ? __cancel_work_timer+0x99/0x17e
       [<ffffffff8104f136>] cancel_work_sync+0xb/0xd
       [<ffffffffa0096675>] rt2x00lib_remove_dev+0x25/0xb0 [rt2x00lib]
       [<ffffffffa0096bf7>] rt2x00lib_probe_dev+0x380/0x3ed [rt2x00lib]
       [<ffffffff811d78a7>] ? __raw_spin_lock_init+0x31/0x52
       [<ffffffffa00bbd2c>] ? T.676+0xe/0x10 [rt2x00usb]
       [<ffffffffa00bbe4f>] rt2x00usb_probe+0x121/0x15e [rt2x00usb]
       [<ffffffff813468bd>] usb_probe_interface+0x151/0x19e
       [<ffffffff812ea08e>] driver_probe_device+0xa7/0x136
       [<ffffffff812ea167>] __driver_attach+0x4a/0x66
       [<ffffffff812ea11d>] ? __driver_attach+0x0/0x66
       [<ffffffff812e96ca>] bus_for_each_dev+0x54/0x89
       [<ffffffff812e9efd>] driver_attach+0x19/0x1b
       [<ffffffff812e9b64>] bus_add_driver+0xb4/0x204
       [<ffffffff812ea41b>] driver_register+0x98/0x109
       [<ffffffff813465dd>] usb_register_driver+0xb2/0x173
       [<ffffffffa00ca000>] ? rt2500usb_init+0x0/0x20 [rt2500usb]
       [<ffffffffa00ca01e>] rt2500usb_init+0x1e/0x20 [rt2500usb]
       [<ffffffff81000203>] do_one_initcall+0x6d/0x17a
       [<ffffffff8106cae8>] sys_init_module+0x9c/0x1e0
       [<ffffffff8100296b>] system_call_fastpath+0x16/0x1b
      Signed-off-by: default avatarStephen Boyd <bebarino@gmail.com>
      Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
      9acd56d3
    • Michael S. Tsirkin's avatar
      vhost: avoid pr_err on condition guest can trigger · 95c0ec6a
      Michael S. Tsirkin authored
      Guest can trigger packet truncation by posting
      a very short buffer and disabling buffer merging.
      Convert pr_err to pr_debug to avoid log from filling
      up when this happens.
      Signed-off-by: default avatarMichael S. Tsirkin <mst@redhat.com>
      95c0ec6a
    • Ben Greear's avatar
      ipmr: Don't leak memory if fib lookup fails. · e40dbc51
      Ben Greear authored
      This was detected using two mcast router tables.  The
      pimreg for the second interface did not have a specific
      mrule, so packets received by it were handled by the
      default table, which had nothing configured.
      
      This caused the ipmr_fib_lookup to fail, causing
      the memory leak.
      Signed-off-by: default avatarBen Greear <greearb@candelatech.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      e40dbc51
  7. 15 Jul, 2010 3 commits
    • Michael S. Tsirkin's avatar
      vhost-net: avoid flush under lock · 1680e906
      Michael S. Tsirkin authored
      We flush under vq mutex when changing backends.
      This creates a deadlock as workqueue being flushed
      needs this lock as well.
      
      https://bugzilla.redhat.com/show_bug.cgi?id=612421
      
      Drop the vq mutex before flush: we have the device mutex
      which is sufficient to prevent another ioctl from touching
      the vq.
      Signed-off-by: default avatarMichael S. Tsirkin <mst@redhat.com>
      1680e906
    • Tom Herbert's avatar
      net: fix problem in reading sock TX queue · b0f77d0e
      Tom Herbert authored
      Fix problem in reading the tx_queue recorded in a socket.  In
      dev_pick_tx, the TX queue is read by doing a check with
      sk_tx_queue_recorded on the socket, followed by a sk_tx_queue_get.
      The problem is that there is not mutual exclusion across these
      calls in the socket so it it is possible that the queue in the
      sock can be invalidated after sk_tx_queue_recorded is called so
      that sk_tx_queue get returns -1, which sets 65535 in queue_index
      and thus dev_pick_tx returns 65536 which is a bogus queue and
      can cause crash in dev_queue_xmit.
      
      We fix this by only calling sk_tx_queue_get which does the proper
      checks.  The interface is that sk_tx_queue_get returns the TX queue
      if the sock argument is non-NULL and TX queue is recorded, else it
      returns -1.  sk_tx_queue_recorded is no longer used so it can be
      completely removed.
      Signed-off-by: default avatarTom Herbert <therbert@google.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      b0f77d0e
    • Doug Kehn's avatar
      net/core: neighbour update Oops · 91a72a70
      Doug Kehn authored
      When configuring DMVPN (GRE + openNHRP) and a GRE remote
      address is configured a kernel Oops is observed.  The
      obserseved Oops is caused by a NULL header_ops pointer
      (neigh->dev->header_ops) in neigh_update_hhs() when
      
      void (*update)(struct hh_cache*, const struct net_device*, const unsigned char *)
      = neigh->dev->header_ops->cache_update;
      
      is executed.  The dev associated with the NULL header_ops is
      the GRE interface.  This patch guards against the
      possibility that header_ops is NULL.
      
      This Oops was first observed in kernel version 2.6.26.8.
      Signed-off-by: default avatarDoug Kehn <rdkehn@yahoo.com>
      Acked-by: default avatarEric Dumazet <eric.dumazet@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      91a72a70
  8. 14 Jul, 2010 4 commits
  9. 13 Jul, 2010 3 commits
  10. 12 Jul, 2010 2 commits
  11. 09 Jul, 2010 1 commit
  12. 08 Jul, 2010 3 commits
  13. 07 Jul, 2010 5 commits
  14. 06 Jul, 2010 2 commits