- 29 Jun, 2017 30 commits
-
-
Johannes Berg authored
Since we now support 8 device families, move their configuration files into a new subdirectory "cfg". Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
Luca Coelho <luciano.coelho@intel.com>
-
Johannes Berg authored
Move the notification wait code into the new fw interaction directory. Signed-off-by:
-
Johannes Berg authored
There's a lot of mvm code that really should be more generic and part of the iwlwifi module. Start by making a place to keep such code - in the new "fw" subdirectory - and already move the firmware related header files there. Signed-off-by:
-
Johannes Berg authored
This structure represents V2, V1 has the three last fields missing. Rename it to be more accurate. Signed-off-by:
-
Johannes Berg authored
If the first frame on a given TID is received with seqno 0 and needed to be retransmitted, we erroneously drop it because the deduplication data is initialized to zero, and then comparing if (unlikely(ieee80211_has_retry(hdr->frame_control) && dup_data->last_seq[tid] == hdr->seq_ctrl && dup_data->last_sub_frame[tid] >= sub_frame_idx)) return true; will return in iwl_mvm_is_dup() since last_sub_frame is also set to zero, and sub_frame_idx is usually zero since this only covers the relatively rare case of A-MSDU. Fix this by initializing the last_seq array to 0xffff, which is an impossible value for hdr->seq_ctrl to have here because the lower four bits are the fragment number, and fragments aren't handled in this code but go to mac80211 instead. Fixes: a571f5f6 ("iwlwifi: mvm: add duplicate packet detection per rx queue") Signed-off-by: -
Johannes Berg authored
In commit b93b1fe3 ("iwlwifi: mvm: fix init_dbg flow to work as expected"), the code was changed to make the stop conditional on not having failed (and on not having init_dbg), which doesn't make sense - we should stop the device regardless of failures. Failure to do so is leading to the device being enabled when it shouldn't be, and - if it gets re-enabled later - the new context info code gets confused as paging data wasn't freed. Remove the invalid error condition again. Fixes: b93b1fe3 ("iwlwifi: mvm: fix init_dbg flow to work as expected") Signed-off-by:
-
Johannes Berg authored
This appears to happen in some cases, like when iwlmvm is unloaded and loaded again without also unloading iwlwifi. Warn in this case and free the paging data to be able to continue without causing corruption and kernel crashes due to it (otherwise, paging data is overwritten, but dram->paging_cnt gets to be twice as big as it should be, and then an eventual free will crash.) Signed-off-by:
-
Johannes Berg authored
By setting the pointers to NULL at the end, these functions are made idempotent. Signed-off-by:
-
Johannes Berg authored
Where possible (all except for "11n_disable", which isn't valid in C) rename the internal names for module parameters to be the same as the externally visible names, to aid finding their use etc. Signed-off-by:
-
Liad Kaufman authored
When receiving a BA_NOTIF on new TX API, it can contain BAs for several TIDs. Go over them and reclaim TX for every TID. Note that although the small API change, the API version still isn't bumped forward, as this NIC isn't still officially released. Signed-off-by:
Liad Kaufman <liad.kaufman@intel.com> Signed-off-by:
-
Emmanuel Grumbach authored
The BT_COEX command should not be sent to the INIT firmware image starting from 8000 family. The firmware team also requested to send the BT_COEX command after the PHY_DB_CMD and the PHY_CFG_CMD. While at it: s/iwl_send_bt_init_conf/iwl_mvm_send_bt_init_conf/ Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
-
Johannes Berg authored
Print the queue for the existing debug message and add a new debug message indicating where the RB ended. Signed-off-by:
-
Liad Kaufman authored
A SCD bug was fixed in the A000 family, allowing to support aggregations of 64 frames (rather than 63). Signed-off-by:
-
Johannes Berg authored
Print out both queue IDs to be able to see what went wrong. Signed-off-by:
-
Johannes Berg authored
When the firmware supports CDB, PHY contexts cannot be modified to change their band, but need to be added/remove instead. Instead of relying on iwl_mvm_has_new_tx_api(), check the right FW capa flag IWL_UCODE_TLV_CAPA_BINDING_CDB_SUPPORT and remove the comment. Signed-off-by:
-
Tzipi Peres authored
Add twelve new PCI IDs for the 9560 series. Signed-off-by:
Tzipi Peres <tzipi.peres@intel.com> Signed-off-by:
-
Tzipi Peres authored
Add a new config struct for the new a000 2ax series and add the five PCI ID for it. Signed-off-by:
-
Luca Coelho authored
There's no reason to pass mvm and trig as parameters to the macro, since it will be expanded inside the function itself. Also remove the bogus buf parameter which doesn't exist and is not used. Signed-off-by: -
Sharon Dvir authored
The sta_id variable is used as an index in an array, should be unsigned. Found by Klocwork. Fixes: 9f9af3d7 ("iwlwifi: mvm: re-aggregate shared queue after unsharing") Signed-off-by:
Sharon Dvir <sharon.dvir@intel.com> Signed-off-by:
-
Johannes Berg authored
A hardware issue on 9000 series devices sometimes causes RF-kill interrupts to not be propagated to the host properly if ASPM is enabled. Work around this by setting the right hardware bit to allow it to interrupt the host for this reason (rfkill). Signed-off-by:
-
Johannes Berg authored
Due to a hardware issue, certain power saving had to be disabled. However, this issue was fixed in B-step, so the workaround only needs to apply to A-step. Signed-off-by:
-
Johannes Berg authored
Some static checkers (e.g. smatch) complain if a non-constant format string is used, even if that's a static const variable. Since there's no impact on code generation, just change those format strings to be macros. Signed-off-by:
-
Johannes Berg authored
Fix the kernel-doc, and remove some fields even the firmware doesn't use in ToF, RX, scan, station and generic FW APIS. Signed-off-by:
-
Johannes Berg authored
Signed-off-by:
-
Johannes Berg authored
Signed-off-by:
-
Johannes Berg authored
Signed-off-by:
-
Johannes Berg authored
Fix various "Excess struct/union/enum/typedef member '...' description in '...'" warnings from kernel-doc, mostly caused by typos. Signed-off-by:
-
Johannes Berg authored
Signed-off-by:
-
Haim Dreyfuss authored
Add a debugfs entry to get a verbose description of the power settings used in each band with the currently selected SAR geographic profile. Signed-off-by:
Haim Dreyfuss <haim.dreyfuss@intel.com> Signed-off-by:
-
Haim Dreyfuss authored
We are going to add debugfs entry to retrieve the current geographic profile being used in the FW. Currently the driver reads those tables from the BIOS and passes them to the FW. To prepare for this retrieving we want to store those tables in the driver. Signed-off-by:
-
- 28 Jun, 2017 10 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.gitKalle Valo authored
ath.git patches for 4.13. Major changes: Only bugfixes or cleanups, no new features.
-
Colin Ian King authored
Trivial fix to spelling mistake in mwifiex_dbg message Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org>
-
Gustavo A. R. Silva authored
Check return value from call to wl18xx_top_reg_write(), so in case of error jump to goto label out and return. Also, remove unnecessary value check before goto label out. Addresses-Coverity-ID: 1226938 Signed-off-by:
Gustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by:
-
Dan Carpenter authored
The kstrtoul() test was reversed so this always returned -ENOTSUPP. Fixes: 27d7f477 ("net: wireless: replace strict_strtoul() with kstrtoul()") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
James Cameron <quozl@laptop.org> Signed-off-by:
-
Bhumika Goyal authored
Declare hwbus_ops structures as const as they are only passed as an argument to the function cw1200_core_probe. This argument is of type const. So, make these structures const. Signed-off-by:
Bhumika Goyal <bhumirks@gmail.com> Signed-off-by:
-
Colin Ian King authored
Two recent commits added new RSI_FSM_STATES (namely FSM_FW_NOT_LOADED and FSM_COMMON_DEV_PARAMS_SENT) and the corresponding table fsm_state was not updated to match. This can lead to an array overrun when accessing the latter two states in fsm_state. Fix this by adding in the missing states. Detected by CoverityScan, CID#1398379 ("Illegal address computation") Fixes: 9920322c ("rsi: add tx frame for common device configuration") Fixes: 015e3674 ("rsi: Register interrupt handler before firmware load") Signed-off-by: -
Arend Van Spriel authored
Since Cypress took over IoT part of Broadcom some chips supported by brcmfmac moved over as well. Adding maintainer info of our peers at Cypress to make their support official. Cc: Chi-Hsien Lin <chi-hsien.lin@cypress.com> Cc: Wright Feng <wright.feng@cypress.com> Reviewed-by:
Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by:
Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by:
Franky Lin <franky.lin@broadcom.com> Signed-off-by:
Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by:
-
Arend Van Spriel authored
Since commit 9cc4b7cb ("brcmfmac: Make skb header writable before use") the headroom usage has been fixed. However, the driver was keeping statistics that got lost. So reworking the code so we get those driver statistics back for debugging. Cc: James Hughes <james.hughes@raspberrypi.org> Reviewed-by:
-
Arend Van Spriel authored
The statistic counter is used in common layer and in the bus layer in different thread contexts so change to use atomic operations. Reviewed-by:
-
Arend Van Spriel authored
A couple of old fields were still described and one field was not described. Reviewed-by:
-
