1. 22 Feb, 2018 1 commit
  2. 19 Feb, 2018 8 commits
  3. 31 Jan, 2018 2 commits
  4. 26 Jan, 2018 9 commits
  5. 25 Jan, 2018 7 commits
    • Lyude Paul's avatar
      drm/nouveau: Move irq setup/teardown to pci ctor/dtor · 0fd189a9
      Lyude Paul authored
      For a while we've been having issues with seemingly random interrupts
      coming from nvidia cards when resuming them. Originally the fix for this
      was thought to be just re-arming the MSI interrupt registers right after
      re-allocating our IRQs, however it seems a lot of what we do is both
      wrong and not even nessecary.
      
      This was made apparent by what appeared to be a regression in the
      mainline kernel that started introducing suspend/resume issues for
      nouveau:
      
              a0c9259d (irq/matrix: Spread interrupts on allocation)
      
      After this commit was introduced, we started getting interrupts from the
      GPU before we actually re-allocated our own IRQ (see references below)
      and assigned the IRQ handler. Investigating this turned out that the
      problem was not with the commit, but the fact that nouveau even
      free/allocates it's irqs before and after suspend/resume.
      
      For starters: drivers in the linux kernel haven't had to handle
      freeing/re-allocating their IRQs during suspend/resume cycles for quite
      a while now. Nouveau seems to be one of the few drivers left that still
      does this, despite the fact there's no reason we actually need to since
      disabling interrupts from the device side should be enough, as the
      kernel is already smart enough to know to disable host-side interrupts
      for us before going into suspend. Since we were tearing down our IRQs by
      hand however, that means there was a short period during resume where
      interrupts could be received before we re-allocated our IRQ which would
      lead to us getting an unhandled IRQ. Since we never handle said IRQ and
      re-arm the interrupt registers, this would cause us to miss all of the
      interrupts from the GPU and cause our init process to start timing out
      on anything requiring interrupts.
      
      So, since this whole setup/teardown every suspend/resume cycle is
      useless anyway, move irq setup/teardown into the pci subdev's ctor/dtor
      functions instead so they're only called at driver load and driver
      unload. This should fix most of the issues with pending interrupts on
      resume, along with getting suspend/resume for nouveau to work again.
      
      As well, this probably means we can also just remove the msi rearm call
      inside nvkm_pci_init(). But since our main focus here is to fix
      suspend/resume before 4.15, we'll save that for a later patch.
      Signed-off-by: default avatarLyude Paul <lyude@redhat.com>
      Cc: Karol Herbst <kherbst@redhat.com>
      Cc: Thomas Gleixner <tglx@linutronix.de>
      Cc: Mike Galbraith <efault@gmx.de>
      Cc: stable@vger.kernel.org
      Signed-off-by: default avatarBen Skeggs <bskeggs@redhat.com>
      0fd189a9
    • Nicolas Dichtel's avatar
      net: don't call update_pmtu unconditionally · f15ca723
      Nicolas Dichtel authored
      Some dst_ops (e.g. md_dst_ops)) doesn't set this handler. It may result to:
      "BUG: unable to handle kernel NULL pointer dereference at           (null)"
      
      Let's add a helper to check if update_pmtu is available before calling it.
      
      Fixes: 52a589d5 ("geneve: update skb dst pmtu on tx path")
      Fixes: a93bf0ff ("vxlan: update skb dst pmtu on tx path")
      CC: Roman Kapl <code@rkapl.cz>
      CC: Xin Long <lucien.xin@gmail.com>
      Signed-off-by: default avatarNicolas Dichtel <nicolas.dichtel@6wind.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      f15ca723
    • Linus Torvalds's avatar
      Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm · 6e20630e
      Linus Torvalds authored
      Pull KVM fixes from Radim Krčmář:
       "Fix races and a potential use after free in the s390 cmma migration
        code"
      
      * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
        KVM: s390: add proper locking for CMMA migration bitmap
      6e20630e
    • Linus Torvalds's avatar
      Merge tag 'for-4.15-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux · 525273fb
      Linus Torvalds authored
      Pull btrfs fix from David Sterba:
       "It's been reported recently that readdir can list stale entries under
        some conditions. Fix it."
      
      * tag 'for-4.15-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
        Btrfs: fix stale entries in readdir
      525273fb
    • Dan Streetman's avatar
      net: tcp: close sock if net namespace is exiting · 4ee806d5
      Dan Streetman authored
      When a tcp socket is closed, if it detects that its net namespace is
      exiting, close immediately and do not wait for FIN sequence.
      
      For normal sockets, a reference is taken to their net namespace, so it will
      never exit while the socket is open.  However, kernel sockets do not take a
      reference to their net namespace, so it may begin exiting while the kernel
      socket is still open.  In this case if the kernel socket is a tcp socket,
      it will stay open trying to complete its close sequence.  The sock's dst(s)
      hold a reference to their interface, which are all transferred to the
      namespace's loopback interface when the real interfaces are taken down.
      When the namespace tries to take down its loopback interface, it hangs
      waiting for all references to the loopback interface to release, which
      results in messages like:
      
      unregister_netdevice: waiting for lo to become free. Usage count = 1
      
      These messages continue until the socket finally times out and closes.
      Since the net namespace cleanup holds the net_mutex while calling its
      registered pernet callbacks, any new net namespace initialization is
      blocked until the current net namespace finishes exiting.
      
      After this change, the tcp socket notices the exiting net namespace, and
      closes immediately, releasing its dst(s) and their reference to the
      loopback interface, which lets the net namespace continue exiting.
      
      Link: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1711407
      Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=97811Signed-off-by: default avatarDan Streetman <ddstreet@canonical.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      4ee806d5
    • Dave Airlie's avatar
      Merge tag 'drm-misc-fixes-2018-01-24' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes · 7e3f8e91
      Dave Airlie authored
      Two vc4 fixes that were applied in the last day.
      One fixes a NULL dereference, and the other fixes
      a flickering bug.
      
      Cc: Eric Anholt <eric@anholt.net>
      Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
      
      * tag 'drm-misc-fixes-2018-01-24' of git://anongit.freedesktop.org/drm/drm-misc:
        drm/vc4: Fix NULL pointer dereference in vc4_save_hang_state()
        drm/vc4: Flush the caches before the bin jobs, as well.
      7e3f8e91
    • Linus Torvalds's avatar
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net · 5b7d2796
      Linus Torvalds authored
      Pull networking fixes from David Miller:
      
       1) Avoid negative netdev refcount in error flow of xfrm state add, from
          Aviad Yehezkel.
      
       2) Fix tcpdump decoding of IPSEC decap'd frames by filling in the
          ethernet header protocol field in xfrm{4,6}_mode_tunnel_input().
          From Yossi Kuperman.
      
       3) Fix a syzbot triggered skb_under_panic in pppoe having to do with
          failing to allocate an appropriate amount of headroom. From
          Guillaume Nault.
      
       4) Fix memory leak in vmxnet3 driver, from Neil Horman.
      
       5) Cure out-of-bounds packet memory access in em_nbyte EMATCH module,
          from Wolfgang Bumiller.
      
       6) Restrict what kinds of sockets can be bound to the KCM multiplexer
          and also disallow when another layer has attached to the socket and
          made use of sk_user_data. From Tom Herbert.
      
       7) Fix use before init of IOTLB in vhost code, from Jason Wang.
      
       8) Correct STACR register write bit definition in IBM emac driver, from
          Ivan Mikhaylov.
      
      * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
        net/ibm/emac: wrong bit is used for STA control register write
        net/ibm/emac: add 8192 rx/tx fifo size
        vhost: do not try to access device IOTLB when not initialized
        vhost: use mutex_lock_nested() in vhost_dev_lock_vqs()
        i40e: flower: check if TC offload is enabled on a netdev
        qed: Free reserved MR tid
        qed: Remove reserveration of dpi for kernel
        kcm: Check if sk_user_data already set in kcm_attach
        kcm: Only allow TCP sockets to be attached to a KCM mux
        net: sched: fix TCF_LAYER_LINK case in tcf_get_base_ptr
        net: sched: em_nbyte: don't add the data offset twice
        mlxsw: spectrum_router: Don't log an error on missing neighbor
        vmxnet3: repair memory leak
        ipv6: Fix getsockopt() for sockets with default IPV6_AUTOFLOWLABEL
        pppoe: take ->needed_headroom of lower device into account on xmit
        xfrm: fix boolean assignment in xfrm_get_type_offload
        xfrm: Fix eth_hdr(skb)->h_proto to reflect inner IP version
        xfrm: fix error flow in case of add state fails
        xfrm: Add SA to hardware at the end of xfrm_state_construct()
      5b7d2796
  6. 24 Jan, 2018 13 commits