- 21 Oct, 2019 15 commits
-
-
Christoph Hellwig authored
The documentation for IOMAP_F_* is a bit disorganized, and doesn't mention the fact that most flags are set by the file system and consumed by the iomap core, while IOMAP_F_SIZE_CHANGED is set by the core and consumed by the file system. Signed-off-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Allison Collins <allison.henderson@oracle.com> Reviewed-by:
Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by:
-
Darrick J. Wong authored
If we encounter an IO error during writeback, log the inode, offset, and sector number of the failure, instead of forcing the user to do some sort of reverse mapping to figure out which file is affected. Signed-off-by:
Dave Chinner <dchinner@redhat.com> Reviewed-by:
-
Christoph Hellwig authored
No need to pass the full bio_vec. Signed-off-by:
-
Christoph Hellwig authored
Move the initialization of ia and ib to the declaration line and remove a superflous else. Signed-off-by:
-
Christoph Hellwig authored
Now that all the writepage code is in the iomap code there is no need to keep this structure public. Signed-off-by:
Carlos Maiolino <cmaiolino@redhat.com> Reviewed-by:
-
Christoph Hellwig authored
And inline mapping should never mark the page dirty and thus never end up in writepages. Add a check for that condition and warn if it happens. Signed-off-by:
-
Christoph Hellwig authored
Take the xfs writeback code and move it to fs/iomap. A new structure with three methods is added as the abstraction from the generic writeback code to the file system. These methods are used to map blocks, submit an ioend, and cancel a page that encountered an error before it was added to an ioend. Signed-off-by:
-
Christoph Hellwig authored
Lift the xfs code for tracing address space operations to the iomap layer. Signed-off-by:
-
Christoph Hellwig authored
File systems like gfs2 don't support delayed allocations or unwritten extents and thus allocate normal mapped blocks to fill holes. To cover the case of such file systems allocating new blocks to fill holes also zero out mapped blocks with the new flag. Signed-off-by:
-
Christoph Hellwig authored
In preparation for moving the writeback code to iomap.c, replace the XFS-specific COW fork concept with the iomap IOMAP_F_SHARED flag. Signed-off-by:
-
Christoph Hellwig authored
In preparation for moving the ioend structure to common code we need to get rid of the xfs-specific xfs_trans type. Just make it a file system private void pointer instead. Signed-off-by:
-
Christoph Hellwig authored
Introduce two nicely abstracted helper, which can be moved to the iomap code later. Also use list_first_entry_or_null to simplify the code a bit. Signed-off-by:
-
Christoph Hellwig authored
In preparation for moving the XFS writeback code to fs/iomap.c, switch it to use struct iomap instead of the XFS-specific struct xfs_bmbt_irec. Signed-off-by:
-
Christoph Hellwig authored
Don't set IOMAP_F_NEW if we COW over an existing allocated range, as these aren't strictly new allocations. This is required to be able to use IOMAP_F_NEW to zero newly allocated blocks, which is required for the iomap code to fully support file systems that don't do delayed allocations or use unwritten extents. Signed-off-by:
-
Christoph Hellwig authored
Currently we don't overwrite the flags field in the iomap in xfs_bmbt_to_iomap. This works fine with 0-initialized iomaps on stack, but is harmful once we want to be able to reuse an iomap in the writeback code. Replace the shared parameter with a set of initial flags an thus ensures the flags field is always reinitialized. Signed-off-by:
-
- 17 Oct, 2019 1 commit
-
-
Dave Chinner authored
When doing a direct IO that spans the current EOF, and there are written blocks beyond EOF that extend beyond the current write, the only metadata update that needs to be done is a file size extension. However, we don't mark such iomaps as IOMAP_F_DIRTY to indicate that there is IO completion metadata updates required, and hence we may fail to correctly sync file size extensions made in IO completion when O_DSYNC writes are being used and the hardware supports FUA. Hence when setting IOMAP_F_DIRTY, we need to also take into account whether the iomap spans the current EOF. If it does, then we need to mark it dirty so that IO completion will call generic_write_sync() to flush the inode size update to stable storage correctly. Fixes: 3460cac1 ("iomap: Use FUA for pure data O_DSYNC DIO writes") Signed-off-by:
-
- 15 Oct, 2019 2 commits
-
-
Jan Kara authored
Use iomap_dio_rw() to wait for unaligned direct IO instead of opencoding the wait. Signed-off-by:
Jan Kara <jack@suse.cz> Reviewed-by:
-
Jan Kara authored
Filesystems do not support doing IO as asynchronous in some cases. For example in case of unaligned writes or in case file size needs to be extended (e.g. for ext4). Instead of forcing filesystem to wait for AIO in such cases, add argument to iomap_dio_rw() which makes the function wait for IO completion. This also results in executing iomap_dio_complete() inline in iomap_dio_rw() providing its return value to the caller as for ordinary sync IO. Signed-off-by:
-
- 13 Oct, 2019 16 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-traceLinus Torvalds authored
Pull tracing fixes from Steven Rostedt: "A few tracing fixes: - Remove lockdown from tracefs itself and moved it to the trace directory. Have the open functions there do the lockdown checks. - Fix a few races with opening an instance file and the instance being deleted (Discovered during the lockdown updates). Kept separate from the clean up code such that they can be backported to stable easier. - Clean up and consolidated the checks done when opening a trace file, as there were multiple checks that need to be done, and it did not make sense having them done in each open instance. - Fix a regression in the record mcount code. - Small hw_lat detector tracer fixes. - A trace_pipe read fix due to not initializing trace_seq" * tag 'trace-v5.4-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Initialize iter->seq after zeroing in tracing_read_pipe() tracing/hwlat: Don't ignore outer-loop duration when calculating max_latency tracing/hwlat: Report total time spent in all NMIs during the sample recordmcount: Fix nop_mcount() function tracing: Do not create tracefs files if tracefs lockdown is in effect tracing: Add locked_down checks to the open calls of files created for tracefs tracing: Add tracing_check_open_get_tr() tracing: Have trace events system open call tracing_open_generic_tr() tracing: Get trace_array reference for available_tracers files ftrace: Get a reference counter for the trace_array on filter files tracefs: Revert ccbd54ff ("tracefs: Restrict tracefs when the kernel is locked down") -
Linus Torvalds authored
Merge tag 'hwmon-for-v5.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fixes from Guenter Roeck: - Update/fix inspur-ipsps1 and k10temp Documentation - Fix nct7904 driver - Fix HWMON_P_MIN_ALARM mask in hwmon core * tag 'hwmon-for-v5.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: docs: Extend inspur-ipsps1 title underline hwmon: (nct7904) Add array fan_alarm and vsen_alarm to store the alarms in nct7904_data struct. docs: hwmon: Include 'inspur-ipsps1.rst' into docs hwmon: Fix HWMON_P_MIN_ALARM mask hwmon: (k10temp) Update documentation and add temp2_input info hwmon: (nct7904) Fix the incorrect value of vsen_mask in nct7904_data struct
-
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linuxLinus Torvalds authored
Pull MTD fixes from Richard Weinberger: "Two fixes for MTD: - spi-nor: Fix for a regression in write_sr() - rawnand: Regression fix for the au1550nd driver" * tag 'fixes-for-5.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: mtd: rawnand: au1550nd: Fix au_read_buf16() prototype mtd: spi-nor: Fix direction of the write_sr() transfer
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull io_uring fix from Jens Axboe: "Single small fix for a regression in the sequence logic for linked commands" * tag 'for-linus-20191012' of git://git.kernel.dk/linux-block: io_uring: fix sequence logic for timeout requests
-
Petr Mladek authored
A customer reported the following softlockup: [899688.160002] NMI watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [test.sh:16464] [899688.160002] CPU: 0 PID: 16464 Comm: test.sh Not tainted 4.12.14-6.23-azure #1 SLE12-SP4 [899688.160002] RIP: 0010:up_write+0x1a/0x30 [899688.160002] Kernel panic - not syncing: softlockup: hung tasks [899688.160002] RIP: 0010:up_write+0x1a/0x30 [899688.160002] RSP: 0018:ffffa86784d4fde8 EFLAGS: 00000257 ORIG_RAX: ffffffffffffff12 [899688.160002] RAX: ffffffff970fea00 RBX: 0000000000000001 RCX: 0000000000000000 [899688.160002] RDX: ffffffff00000001 RSI: 0000000000000080 RDI: ffffffff970fea00 [899688.160002] RBP: ffffffffffffffff R08: ffffffffffffffff R09: 0000000000000000 [899688.160002] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8b59014720d8 [899688.160002] R13: ffff8b59014720c0 R14: ffff8b5901471090 R15: ffff8b5901470000 [899688.160002] tracing_read_pipe+0x336/0x3c0 [899688.160002] __vfs_read+0x26/0x140 [899688.160002] vfs_read+0x87/0x130 [899688.160002] SyS_read+0x42/0x90 [899688.160002] do_syscall_64+0x74/0x160 It caught the process in the middle of trace_access_unlock(). There is no loop. So, it must be looping in the caller tracing_read_pipe() via the "waitagain" label. Crashdump analyze uncovered that iter->seq was completely zeroed at this point, including iter->seq.seq.size. It means that print_trace_line() was never able to print anything and there was no forward progress. The culprit seems to be in the code: /* reset all but tr, trace, and overruns */ memset(&iter->seq, 0, sizeof(struct trace_iterator) - offsetof(struct trace_iterator, seq)); It was added by the commit 53d0aa77 ("ftrace: add logic to record overruns"). It was v2.6.27-rc1. It was the time when iter->seq looked like: struct trace_seq { unsigned char buffer[PAGE_SIZE]; unsigned int len; }; There was no "size" variable and zeroing was perfectly fine. The solution is to reinitialize the structure after or without zeroing. Link: http://lkml.kernel.org/r/20191011142134.11997-1-pmladek@suse.comSigned-off-by:
Petr Mladek <pmladek@suse.com> Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org>
-
Srivatsa S. Bhat (VMware) authored
max_latency is intended to record the maximum ever observed hardware latency, which may occur in either part of the loop (inner/outer). So we need to also consider the outer-loop sample when updating max_latency. Link: http://lkml.kernel.org/r/157073345463.17189.18124025522664682811.stgit@srivatsa-ubuntu Fixes: e7c15cd8 ("tracing: Added hardware latency tracer") Cc: stable@vger.kernel.org Signed-off-by:
Srivatsa S. Bhat (VMware) <srivatsa@csail.mit.edu> Signed-off-by:
-
Srivatsa S. Bhat (VMware) authored
nmi_total_ts is supposed to record the total time spent in *all* NMIs that occur on the given CPU during the (active portion of the) sampling window. However, the code seems to be overwriting this variable for each NMI, thereby only recording the time spent in the most recent NMI. Fix it by accumulating the duration instead. Link: http://lkml.kernel.org/r/157073343544.17189.13911783866738671133.stgit@srivatsa-ubuntu Fixes: 7b2c8625 ("tracing: Add NMI tracing in hwlat detector") Cc: stable@vger.kernel.org Signed-off-by:
-
Steven Rostedt (VMware) authored
The removal of the longjmp code in recordmcount.c mistakenly made the return of make_nop() being negative an exit of nop_mcount(). It should not exit the routine, but instead just not process that part of the code. By exiting with an error code, it would cause the update of recordmcount to fail some files which would fail the build if ftrace function tracing was enabled. Link: http://lkml.kernel.org/r/20191009110538.5909fec6@gandalf.local.homeReported-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Tested-by:
-
Steven Rostedt (VMware) authored
If on boot up, lockdown is activated for tracefs, don't even bother creating the files. This can also prevent instances from being created if lockdown is in effect. Link: http://lkml.kernel.org/r/CAHk-=whC6Ji=fWnjh2+eS4b15TnbsS4VPVtvBOwCy1jjEG_JHQ@mail.gmail.comSuggested-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Steven Rostedt (VMware) authored
Added various checks on open tracefs calls to see if tracefs is in lockdown mode, and if so, to return -EPERM. Note, the event format files (which are basically standard on all machines) as well as the enabled_functions file (which shows what is currently being traced) are not lockde down. Perhaps they should be, but it seems counter intuitive to lockdown information to help you know if the system has been modified. Link: http://lkml.kernel.org/r/CAHk-=wj7fGPKUspr579Cii-w_y60PtRaiDgKuxVtBAMK0VNNkA@mail.gmail.comSuggested-by:
-
Steven Rostedt (VMware) authored
Currently, most files in the tracefs directory test if tracing_disabled is set. If so, it should return -ENODEV. The tracing_disabled is called when tracing is found to be broken. Originally it was done in case the ring buffer was found to be corrupted, and we wanted to prevent reading it from crashing the kernel. But it's also called if a tracing selftest fails on boot. It's a one way switch. That is, once it is triggered, tracing is disabled until reboot. As most tracefs files can also be used by instances in the tracefs directory, they need to be carefully done. Each instance has a trace_array associated to it, and when the instance is removed, the trace_array is freed. But if an instance is opened with a reference to the trace_array, then it requires looking up the trace_array to get its ref counter (as there could be a race with it being deleted and the open itself). Once it is found, a reference is added to prevent the instance from being removed (and the trace_array associated with it freed). Combine the two checks (tracing_disabled and trace_array_get()) into a single helper function. This will also make it easier to add lockdown to tracefs later. Link: http://lkml.kernel.org/r/20191011135458.7399da44@gandalf.local.homeSigned-off-by:
-
Steven Rostedt (VMware) authored
Instead of having the trace events system open call open code the taking of the trace_array descriptor (with trace_array_get()) and then calling trace_open_generic(), have it use the tracing_open_generic_tr() that does the combination of the two. This requires making tracing_open_generic_tr() global. Signed-off-by: -
Steven Rostedt (VMware) authored
As instances may have different tracers available, we need to look at the trace_array descriptor that shows the list of the available tracers for the instance. But there's a race between opening the file and an admin deleting the instance. The trace_array_get() needs to be called before accessing the trace_array. Cc: stable@vger.kernel.org Fixes: 607e2ea1 ("tracing: Set up infrastructure to allow tracers for instances") Signed-off-by:
-
Steven Rostedt (VMware) authored
The ftrace set_ftrace_filter and set_ftrace_notrace files are specific for an instance now. They need to take a reference to the instance otherwise there could be a race between accessing the files and deleting the instance. It wasn't until the :mod: caching where these file operations started referencing the trace_array directly. Cc: stable@vger.kernel.org Fixes: 673feb9d ("ftrace: Add :mod: caching infrastructure to trace_array") Signed-off-by:
-
Steven Rostedt (VMware) authored
Running the latest kernel through my "make instances" stress tests, I triggered the following bug (with KASAN and kmemleak enabled): mkdir invoked oom-killer: gfp_mask=0x40cd0(GFP_KERNEL|__GFP_COMP|__GFP_RECLAIMABLE), order=0, oom_score_adj=0 CPU: 1 PID: 2229 Comm: mkdir Not tainted 5.4.0-rc2-test #325 Hardware name: MSI MS-7823/CSM-H87M-G43 (MS-7823), BIOS V1.6 02/22/2014 Call Trace: dump_stack+0x64/0x8c dump_header+0x43/0x3b7 ? trace_hardirqs_on+0x48/0x4a oom_kill_process+0x68/0x2d5 out_of_memory+0x2aa/0x2d0 __alloc_pages_nodemask+0x96d/0xb67 __alloc_pages_node+0x19/0x1e alloc_slab_page+0x17/0x45 new_slab+0xd0/0x234 ___slab_alloc.constprop.86+0x18f/0x336 ? alloc_inode+0x2c/0x74 ? irq_trace+0x12/0x1e ? tracer_hardirqs_off+0x1d/0xd7 ? __slab_alloc.constprop.85+0x21/0x53 __slab_alloc.constprop.85+0x31/0x53 ? __slab_alloc.constprop.85+0x31/0x53 ? alloc_inode+0x2c/0x74 kmem_cache_alloc+0x50/0x179 ? alloc_inode+0x2c/0x74 alloc_inode+0x2c/0x74 new_inode_pseudo+0xf/0x48 new_inode+0x15/0x25 tracefs_get_inode+0x23/0x7c ? lookup_one_len+0x54/0x6c tracefs_create_file+0x53/0x11d trace_create_file+0x15/0x33 event_create_dir+0x2a3/0x34b __trace_add_new_event+0x1c/0x26 event_trace_add_tracer+0x56/0x86 trace_array_create+0x13e/0x1e1 instance_mkdir+0x8/0x17 tracefs_syscall_mkdir+0x39/0x50 ? get_dname+0x31/0x31 vfs_mkdir+0x78/0xa3 do_mkdirat+0x71/0xb0 sys_mkdir+0x19/0x1b do_fast_syscall_32+0xb0/0xed I bisected this down to the addition of the proxy_ops into tracefs for lockdown. It appears that the allocation of the proxy_ops and then freeing it in the destroy_inode callback, is causing havoc with the memory system. Reading the documentation about destroy_inode and talking with Linus about this, this is buggy and wrong. When defining the destroy_inode() method, it is expected that the destroy_inode() will also free the inode, and not just the extra allocations done in the creation of the inode. The faulty commit causes a memory leak of the inode data structure when they are deleted. Instead of allocating the proxy_ops (and then having to free it) the checks should be done by the open functions themselves, and not hack into the tracefs directory. First revert the tracefs updates for locked_down and then later we can add the locked_down checks in the kernel/trace files. Link: http://lkml.kernel.org/r/20191011135458.7399da44@gandalf.local.home Fixes: ccbd54ff ("tracefs: Restrict tracefs when the kernel is locked down") Suggested-by:
-
- 12 Oct, 2019 6 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-miscLinus Torvalds authored
Pull char/misc driver fixes from Greg KH: "Here are some small char/misc driver fixes for 5.4-rc3. Nothing huge here. Some binder driver fixes (although it is still being discussed if these all fix the reported issues or not, so more might be coming later), some mei device ids and fixes, and a google firmware driver bugfix that fixes a regression, as well as some other tiny fixes. All have been in linux-next with no reported issues" * tag 'char-misc-5.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: firmware: google: increment VPD key_len properly w1: ds250x: Fix build error without CRC16 virt: vbox: fix memory leak in hgcm_call_preprocess_linaddr binder: Fix comment headers on binder_alloc_prepare_to_free() binder: prevent UAF read in print_binder_transaction_log_entry() misc: fastrpc: prevent memory leak in fastrpc_dma_buf_attach mei: avoid FW version request on Ibex Peak and earlier mei: me: add comet point (lake) LP device ids
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/stagingLinus Torvalds authored
Pull staging/IIO driver fixes from Greg KH: "Here are some staging and IIO driver fixes for 5.4-rc3. The "biggest" thing here is a removal of the fbtft device and flexfb code as they have been abandoned by their authors and are no longer needed for that hardware. Other than that, the usual amount of staging driver and iio driver fixes for reported issues, and some speakup sysfs file documentation, which has been long awaited for. All have been in linux-next with no reported issues" * tag 'staging-5.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (32 commits) iio: Fix an undefied reference error in noa1305_probe iio: light: opt3001: fix mutex unlock race iio: adc: ad799x: fix probe error handling iio: light: add missing vcnl4040 of_compatible iio: light: fix vcnl4000 devicetree hooks iio: imu: st_lsm6dsx: fix waitime for st_lsm6dsx i2c controller iio: adc: axp288: Override TS pin bias current for some models iio: imu: adis16400: fix memory leak iio: imu: adis16400: release allocated memory on failure iio: adc: stm32-adc: fix a race when using several adcs with dma and irq iio: adc: stm32-adc: move registers definitions iio: accel: adxl372: Perform a reset at start up iio: accel: adxl372: Fix push to buffers lost samples iio: accel: adxl372: Fix/remove limitation for FIFO samples iio: adc: hx711: fix bug in sampling of data staging: vt6655: Fix memory leak in vt6655_probe staging: exfat: Use kvzalloc() instead of kzalloc() for exfat_sb_info Staging: fbtft: fix memory leak in fbtft_framebuffer_alloc staging: speakup: document sysfs attributes staging: rtl8188eu: fix HighestRate check in odm_ARFBRefresh_8188E() ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/ttyLinus Torvalds authored
Pull tty/serial driver fixes from Greg KH: "Here are some small tty and serial driver fixes for 5.4-rc3 that resolve a number of reported issues and regressions. None of these are huge, full details are in the shortlog. There's also a MAINTAINERS update that I think you might have already taken in your tree already, but git should handle that merge easily. All have been in linux-next with no reported issues" * tag 'tty-5.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: MAINTAINERS: kgdb: Add myself as a reviewer for kgdb/kdb tty: serial: imx: Use platform_get_irq_optional() for optional IRQs serial: fix kernel-doc warning in comments serial: 8250_omap: Fix gpio check for auto RTS/CTS serial: mctrl_gpio: Check for NULL pointer tty: serial: fsl_lpuart: Fix lpuart_flush_buffer() tty: serial: Fix PORT_LINFLEXUART definition tty: n_hdlc: fix build on SPARC serial: uartps: Fix uartps_major handling serial: uartlite: fix exit path null pointer tty: serial: linflexuart: Fix magic SysRq handling serial: sh-sci: Use platform_get_irq_optional() for optional interrupts dt-bindings: serial: sh-sci: Document r8a774b1 bindings serial/sifive: select SERIAL_EARLYCON tty: serial: rda: Fix the link time qualifier of 'rda_uart_exit()' tty: serial: owl: Fix the link time qualifier of 'owl_uart_exit()'
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds authored
Pull USB fixes from Greg KH: "Here are a lot of small USB driver fixes for 5.4-rc3. syzbot has stepped up its testing of the USB driver stack, now able to trigger fun race conditions between disconnect and probe functions. Because of that we have a lot of fixes in here from Johan and others fixing these reported issues that have been around since almost all time. We also are just deleting the rio500 driver, making all of the syzbot bugs found in it moot as it turns out no one has been using it for years as there is a userspace version that is being used instead. There are also a number of other small fixes in here, all resolving reported issues or regressions. All have been in linux-next without any reported issues" * tag 'usb-5.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (65 commits) USB: yurex: fix NULL-derefs on disconnect USB: iowarrior: use pr_err() USB: iowarrior: drop redundant iowarrior mutex USB: iowarrior: drop redundant disconnect mutex USB: iowarrior: fix use-after-free after driver unbind USB: iowarrior: fix use-after-free on release USB: iowarrior: fix use-after-free on disconnect USB: chaoskey: fix use-after-free on release USB: adutux: fix use-after-free on release USB: ldusb: fix NULL-derefs on driver unbind USB: legousbtower: fix use-after-free on release usb: cdns3: Fix for incorrect DMA mask. usb: cdns3: fix cdns3_core_init_role() usb: cdns3: gadget: Fix full-speed mode USB: usb-skeleton: drop redundant in-urb check USB: usb-skeleton: fix use-after-free after driver unbind USB: usb-skeleton: fix NULL-deref on disconnect usb:cdns3: Fix for CV CH9 running with g_zero driver. usb: dwc3: Remove dev_err() on platform_get_irq() failure usb: dwc3: Switch to platform_get_irq_byname_optional() ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler fixes from Ingo Molnar: "Two fixes: a guest-cputime accounting fix, and a cgroup bandwidth quota precision fix" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/vtime: Fix guest/system mis-accounting on task switch sched/fair: Scale bandwidth quota and period without losing quota/period ratio precision
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fixes from Ingo Molnar: "Mostly tooling fixes, but also a couple of updates for new Intel models (which are technically hw-enablement, but to users it's a fix to perf behavior on those new CPUs - hope this is fine), an AUX inheritance fix, event time-sharing fix, and a fix for lost non-perf NMI events on AMD systems" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits) perf/x86/cstate: Add Tiger Lake CPU support perf/x86/msr: Add Tiger Lake CPU support perf/x86/intel: Add Tiger Lake CPU support perf/x86/cstate: Update C-state counters for Ice Lake perf/x86/msr: Add new CPU model numbers for Ice Lake perf/x86/cstate: Add Comet Lake CPU support perf/x86/msr: Add Comet Lake CPU support perf/x86/intel: Add Comet Lake CPU support perf/x86/amd: Change/fix NMI latency mitigation to use a timestamp perf/core: Fix corner case in perf_rotate_context() perf/core: Rework memory accounting in perf_mmap() perf/core: Fix inheritance of aux_output groups perf annotate: Don't return -1 for error when doing BPF disassembly perf annotate: Return appropriate error code for allocation failures perf annotate: Fix arch specific ->init() failure errors perf annotate: Propagate the symbol__annotate() error return perf annotate: Fix the signedness of failure returns perf annotate: Propagate perf_env__arch() error perf evsel: Fall back to global 'perf_env' in perf_evsel__env() perf tools: Propagate get_cpuid() error ...
-
