- 29 May, 2020 1 commit
-
-
Dinghao Liu authored
pm_runtime_get_sync() increments the runtime PM usage counter even the call returns an error code. Thus a pairing decrement is needed on the error handling path to keep the counter balanced. Signed-off-by:
Dinghao Liu <dinghao.liu@zju.edu.cn> Link: https://lore.kernel.org/r/20200529012230.5863-1-dinghao.liu@zju.edu.cnSigned-off-by:
Mark Brown <broonie@kernel.org>
-
- 28 May, 2020 5 commits
-
-
Ravulapati Vishnu vardhan rao authored
In DMA pointer the initialzation of instance is of no use. In fact it will reinitialize the instance variable which is already opened and functional. Signed-off-by:
Ravulapati Vishnu vardhan rao <Vishnuvardhanrao.Ravulapati@amd.com> Link: https://lore.kernel.org/r/1590652337-21587-1-git-send-email-Vishnuvardhanrao.Ravulapati@amd.comSigned-off-by:
-
Chuhong Yuan authored
sta32x_probe() forgets to call undo functions when it fails, add the missed function calls to fix it. Signed-off-by:
Chuhong Yuan <hslester96@gmail.com> Link: https://lore.kernel.org/r/20200528102004.911653-1-hslester96@gmail.comSigned-off-by:
-
Arnd Bergmann authored
With SND_SOC_AMD_RV_RT5682_MACH using the i2c version of the driver, we can easily get a build failure when I2C is built-in but soundwire is not: WARNING: unmet direct dependencies detected for SND_SOC_RT5682 Depends on [m]: SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && (I2C [=y] || SOUNDWIRE [=m]) && (SOUNDWIRE [=m] || !SOUNDWIRE [=m]) && (I2C [=y] || !I2C [=y]) Selected by [y]: - SND_SOC_AMD_RV_RT5682_MACH [=y] && SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && SND_SOC_AMD_ACP3x [=y] && I2C [=y] && CROS_EC [=y] Selected by [m]: - SND_SOC_RT5682_SDW [=m] && SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && SOUNDWIRE [=m] && (I2C [=y] || !I2C [=y]) Rework the driver to have three separate modules, with the main driver just dealing with the common bits and the actual initialization as part of i2c and sdw specific modules. The conversion is fairly mechanical to keep it easy to review, i.e. it moves code around with the minimal required renaming and changes. Fixes: 6b8e4e7d ("ASoC: amd: Add machine driver for Raven based platform") Fixes: fd443a20 ("ASoC: rt5682: fix I2C/Soundwire dependencies") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Reviewed-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200528091851.2889754-1-arnd@arndb.deSigned-off-by:
-
Seven Lee authored
The nau8810 driver can also compatible with nau8812 and nau8814. Signed-off-by:
Seven Lee <wtli@nuvoton.com> Link: https://lore.kernel.org/r/20200528070510.29959-1-wtli@nuvoton.comSigned-off-by:
-
Paul Cercueil authored
All boards with Ingenic SoCs probe with devicetree already, we have no use for a non-devicetree path. This solves some compilation warnings that were caused by unused variables in the case where CONFIG_OF was disabled. Reported-by:
kbuild test robot <lkp@intel.com> Signed-off-by:
Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20200523125455.12392-1-paul@crapouillou.netSigned-off-by:
-
- 27 May, 2020 16 commits
-
-
Mark Brown authored
Merge series "ASoC: SOF: finalize Baytrail/CherryTrail support" from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>: This long-overdue patchset adds missing system suspend/resume support and hardens the IPC to solve module load/unload issues on specific devices such as Cyan Chromebook. With this series SOF is finally iso-feature with the legacy driver. Thanks to Ranjani and Keyon for the basic patches and Enric for testing. The last part needed for Baytrail/Cherrytrail is simplification of the driver/card names and turn-key UCM support (on-going work with Jaroslav). Keyon Jie (1): ASoC: SOF: Intel: BYT: harden IPC initialization and handling Pierre-Louis Bossart (3): ASoC: Intel: bytcr_rt5640/51: remove .ignore_suspend ASoC: Intel: byt/cht: add .pm_ops ASoC: SOF: Intel: BYT: mask BUSY or DONE interrupts in handler Ranjani Sridharan (4): ASoC: SOF: Intel: byt: Add PM callbacks ASoC: SOF: pm: handle resume on legacy Intel platforms ASoC: SOF: ipc: ignore DSP replies received when they are not expected ASoC: SOF: Intel: BYT: add .remove op sound/soc/intel/boards/bytcht_cx2072x.c | 3 + sound/soc/intel/boards/bytcht_da7213.c | 3 + sound/soc/intel/boards/bytcht_es8316.c | 3 + sound/soc/intel/boards/bytcr_rt5640.c | 7 +- sound/soc/intel/boards/bytcr_rt5651.c | 6 +- sound/soc/intel/boards/cht_bsw_max98090_ti.c | 3 + sound/soc/intel/boards/cht_bsw_nau8824.c | 3 + sound/soc/intel/boards/cht_bsw_rt5645.c | 3 + sound/soc/intel/boards/cht_bsw_rt5672.c | 3 + sound/soc/sof/intel/byt.c | 116 ++++++++++++++----- sound/soc/sof/ipc.c | 9 +- sound/soc/sof/pm.c | 8 +- sound/soc/sof/sof-priv.h | 2 +- 13 files changed, 122 insertions(+), 47 deletions(-) base-commit: 0d71a5cf -- 2.20.1
-
Wei Yongjun authored
In case of error, the function devm_ioremap() returns NULL pointer not ERR_PTR(). The IS_ERR() test in the return value check should be replaced with NULL test. Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Link: https://lore.kernel.org/r/20200527030210.124393-1-weiyongjun1@huawei.comSigned-off-by:
-
Dan Murphy authored
Fix the warnings when using the W=1 compiler flag. sound/soc/codecs/tlv320adcx140.c: In function ‘adcx140_reset’: sound/soc/codecs/tlv320adcx140.c:570:6: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable] 570 | int ret = 0; | ^~~ This was set but only used in case where the reset GPIO is not defined. Have the function return the value of ret. sound/soc/codecs/tlv320adcx140.c: In function ‘adcx140_codec_probe’: sound/soc/codecs/tlv320adcx140.c:778:18: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits] 778 | if (bias_source < ADCX140_MIC_BIAS_VAL_VREF || | ^ sound/soc/codecs/tlv320adcx140.c:789:18: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits] 789 | if (vref_source < ADCX140_MIC_BIAS_VREF_275V || This condition will not occur since if the dt property is not set then the *_source variable is set to the default value. So there is no way that *_source can be less then 0. Which is what each #define is set to. The code just needs to make sure that the dt property is not out of the upper bounds. Reported-by:Dan Murphy <dmurphy@ti.com> Link: https://lore.kernel.org/r/20200526175247.15309-1-dmurphy@ti.comSigned-off-by:
-
Dinghao Liu authored
pm_runtime_get_sync() increments the runtime PM usage counter even the call returns an error code. Thus a pairing decrement is needed on the error handling path to keep the counter balanced. Signed-off-by:
Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20200527024625.9937-1-dinghao.liu@zju.edu.cnSigned-off-by:
-
Dinghao Liu authored
pm_runtime_get_sync() increments the runtime PM usage counter even the call returns an error code. Thus a pairing decrement is needed on the error handling path to keep the counter balanced. Signed-off-by:
-
Dan Murphy authored
Add support to configure the GPI pins to the specific configuration. The pins can be disabled or be configured as data input for any of the digital mic channels. In addition the GPI can be used a a general purpose input, a Master clock input or an ASI input for daisy chaining devices. Signed-off-by:
-
Dan Murphy authored
Add an array property that configures the General Purpose Input (GPI) register. The device has 4 GPI pins and each pin can be configured in 1 of 7 different ways. Signed-off-by:
-
Dinghao Liu authored
pm_runtime_get_sync() increments the runtime PM usage counter even the call returns an error code. Thus a pairing decrement is needed on the error handling path to keep the counter balanced. Signed-off-by:
-
Keyon Jie authored
On probe and reset, we should not touch the SHIM_IMRD register since it is configured by firmware. The driver only configures SHIM_IMRX with the BUSY interrupt enabled by default and DONE interrupt disabled. When sending an IPC message, the DONE interrupt is enabled until the DSP response is provided. This sequence hardens the IPC communication and avoid interrupt-related issues when adding/removing modules or during system suspend-resume transitions. Signed-off-by:
Keyon Jie <yang.jie@linux.intel.com> Signed-off-by:
Enric Balletbo i Serra <enric.balletbo@collabora.com> Reviewed-by:
Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Link: https://lore.kernel.org/r/20200526203640.25980-9-pierre-louis.bossart@linux.intel.comSigned-off-by:
-
Pierre-Louis Bossart authored
The DSP may send the same interrupt multiple times before it's handled in the interrupt thread. Rather than masking it in the thread, mask it in the handler directly. This patch also removes useless checks that cannot happen, and masks that are set don't need to be re-tested. Suggested-by:
-
Ranjani Sridharan authored
Add .remove op that disables interrupts and reset the DSP for BYT and CHT platforms. Signed-off-by:
-
Ranjani Sridharan authored
We currently ignore the reply messages from the DSP when they are not expected but call it out as an error. Change the error message to a debug message. Signed-off-by:
-
Pierre-Louis Bossart authored
Add required .pm_ops to support suspend/resume on baytrail/cherrytrail machines. This .pm_ops is conditionally-added to avoid impacting the legacy driver where power management is handled differently. Signed-off-by:
-
Pierre-Louis Bossart authored
Low-power playback was never enabled on Baytrail devices, remove what looks like copy/paste from other machine drivers which were never submitted upstream. Signed-off-by:
-
Ranjani Sridharan authored
Add new case when set_power_state() is not supported, e.g. for Intel Baytrail/Cherrytrail legacy platforms. Signed-off-by:
-
Ranjani Sridharan authored
Add the PM callbacks for BYT/CHT platforms. Signed-off-by:
-
- 26 May, 2020 4 commits
-
-
Dinghao Liu authored
pm_runtime_get_sync() increments the runtime PM usage counter even when it returns an error code. Thus a pairing decrement is needed on the error handling path to keep the counter balanced. Signed-off-by:
-
Qiushi Wu authored
Function "pm_runtime_get_sync()" is not handled by "pm_runtime_put()" if "PTR_ERR(rst) == -EPROBE_DEFER". Fix this issue by adding "pm_runtime_put()" into this error path. Fixes: f65bb92c ("ASoC: img-i2s-in: Add runtime PM") Signed-off-by:
Qiushi Wu <wu000273@umn.edu> Link: https://lore.kernel.org/r/20200525055011.31925-1-wu000273@umn.eduSigned-off-by:
-
Dinghao Liu authored
When clk_set_parent() returns an error code, a pairing runtime PM usage counter increment is needed to keep the counter balanced. Signed-off-by:
Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/20200525085848.4227-1-dinghao.liu@zju.edu.cnSigned-off-by:
-
kbuild test robot authored
sound/soc/codecs/zl38060.c:298:2-3: Unneeded semicolon Remove unneeded semicolon. Generated by: scripts/coccinelle/misc/semicolon.cocci Fixes: 52e8a94b ("ASoC: Add initial ZL38060 driver") Signed-off-by:
-
- 25 May, 2020 14 commits
-
-
Mark Brown authored
Hi Mark Current ALSA SoC is handling dai_link related operation, but it is implmemented directly without using function/macro, and at random place. This v4 patch-set creates new snd_soc_link_xxx() functions which handles dai_link related operation, and implmement these at new soc-link.c. v3 -> v4 - add Reviewed-by from Ranjani and Pierre-Louis - fix bisection error at [2/7] v2 -> v3 - add missing #include <sound/soc-link.h> in soc-link.c v1 -> v2 - #include <sound/soc-link.h> is added on each c source file instead of soc.h - not have extra error message after snd_soc_link_xxx(), because it already indicate it via snc_link_ret() - snd_soc_link_compr_xxx() doesn't have rtd parameter, because it can be created from cstream Link: https://lore.kernel.org/r/87lflk4yk3.wl-kuninori.morimoto.gx@renesas.com Link: https://lore.kernel.org/r/874ksa59wc.wl-kuninori.morimoto.gx@renesas.com Link: https://lore.kernel.org/r/877dx868op.wl-kuninori.morimoto.gx@renesas.com Kuninori Morimoto (7): ASoC: add soc-link.c ASoC: soc-link: move soc_rtd_xxx() ASoC: soc-link: remove unneeded parameter from snd_soc_link_xxx() ASoC: soc-link: add snd_soc_link_be_hw_params_fixup() ASoC: soc-link: add snd_soc_link_compr_startup() ASoC: soc-link: add snd_soc_link_compr_shutdown() ASoC: soc-link: add snd_soc_link_compr_set_params() include/sound/soc-link.h | 27 +++++++ sound/soc/Makefile | 2 +- sound/soc/soc-compress.c | 46 ++++-------- sound/soc/soc-core.c | 18 ++--- sound/soc/soc-dai.c | 9 ++- sound/soc/soc-link.c | 150 +++++++++++++++++++++++++++++++++++++++ sound/soc/soc-pcm.c | 86 ++++------------------ 7 files changed, 219 insertions(+), 119 deletions(-) create mode 100644 include/sound/soc-link.h create mode 100644 sound/soc/soc-link.c -- 2.17.1 Thank you for your help !! Best regards --- Kuninori Morimoto
-
Mark Brown authored
Merge series "ASoC: SOF: extended manifest support for 5.8" from Kai Vehmanen <kai.vehmanen@linux.intel.com>: Hello, extended firmware manifest is a method to retrieve capabilities directly from the firmware file instead of routing the information via the DSP and reading it back via IPC (latter mechanism still supported but will be deprecated). This feature was briefly merged to 5.8 with the series sent on 2020-Apr-15, but due to a regression hit with exporting uapi headers, the patches got dropped. Here's an update with the uapi header issue fixed, rebased to latest 'for-5.8' and a few minor fixes. This has been sitting in sof-dev for some weeks and no further issues have been found. We also added a check for the uapi-export case to SOF CI, so such errors would not slip through again in the future. Tooling support to create firmware files with an extended header is available in SOF firmware repository (see the rimage tool) and this part is already merged. Karol Trzcinski (5): ASoC: SOF: loader: Adjust validation condition for fw_offset ASoC: SOF: Introduce extended manifest ASoC: SOF: ext_manifest: parse firmware version ASoC: SOF: ext_manifest: parse windows ASoC: SOF: ext_manifest: parse compiler version include/sound/sof/ext_manifest.h | 95 +++++++++++++++++ sound/soc/sof/intel/hda-loader.c | 2 +- sound/soc/sof/loader.c | 176 ++++++++++++++++++++++++++++++- 3 files changed, 269 insertions(+), 4 deletions(-) create mode 100644 include/sound/sof/ext_manifest.h -- 2.26.2
-
Shengjiu Wang authored
With dedicated power domain for asrc, power can be disabled after probe and pm runtime suspend, then the value of all registers need to be restored in pm runtime resume. So we can merge suspend/resume function to runtime_suspend/resume function and enable regcache only in end of probe. Signed-off-by:
Shengjiu Wang <shengjiu.wang@nxp.com> Acked-by:
Nicolin Chen <nicoleotsuka@gmail.com> Link: https://lore.kernel.org/r/1590141444-28668-1-git-send-email-shengjiu.wang@nxp.comSigned-off-by:
-
Tang Bin authored
Omit unused initialized value, because 'ret' will be assigined by the function snd_soc_component_read(). Signed-off-by:
Zhang Shengju <zhangshengju@cmss.chinamobile.com> Signed-off-by:
Tang Bin <tangbin@cmss.chinamobile.com> Link: https://lore.kernel.org/r/20200513111408.11452-1-tangbin@cmss.chinamobile.comSigned-off-by:
-
shengjiu wang authored
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=clang make.cross ARCH=x86_64 sound/soc/fsl/fsl_asrc.c:557:18: warning: no previous prototype for function 'fsl_asrc_get_dma_channel' [-Wmissing-prototypes] struct dma_chan *fsl_asrc_get_dma_channel(struct fsl_asrc_pair *pair, bool dir) ^ sound/soc/fsl/fsl_asrc.c:557:1: note: declare 'static' if the function is not intended to be used outside of this translation unit struct dma_chan *fsl_asrc_get_dma_channel(struct fsl_asrc_pair *pair, bool dir) ^ static Fixes: be7bd03f ("ASoC: fsl_asrc: Move common definition to fsl_asrc_common") Reported-by: -
Steve Lee authored
This is the initial amplifier driver for max98390. Reported-by:
Steve Lee <steves.lee@maximintegrated.com> Link: https://lore.kernel.org/r/20200518005038.21074-1-steves.lee@maximintegrated.comSigned-off-by:
-
Karol Trzcinski authored
The compiler version and description can be extracted from the extended manifest content. This information known at build time does not need to be provided in a mailbox. Signed-off-by:
Karol Trzcinski <karolx.trzcinski@linux.intel.com> Signed-off-by:
Kai Vehmanen <kai.vehmanen@linux.intel.com> Reviewed-by:
Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Reviewed-by:
-
Karol Trzcinski authored
The window description can be extracted from the extended manifest content. This information known at build time does not need to be provided in a mailbox. Signed-off-by:
-
Karol Trzcinski authored
The firmware version can be extracted from the extended manifest content. This information known at build time does not need to be provided in a mailbox. Signed-off-by:
-
Karol Trzcinski authored
Extended manifest is a place to store build time known firmware metadata, for example firmware version or used compiler description. Given information is read on host side before firmware startup. This part of output binary is located as a first structure in binary file. Extended manifest should be skipped in firmware loading routine. Signed-off-by:
-
Karol Trzcinski authored
Condition in if statement should be same as trace message and FW size equal to zero (after skipping offset) should be marked as invalid. Signed-off-by:
-
Kuninori Morimoto authored
dai_link related function should be implemented at soc-link.c. This patch adds snd_soc_link_compr_set_params(). Signed-off-by:
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by:
-
Kuninori Morimoto authored
dai_link related function should be implemented at soc-link.c. This patch adds snd_soc_link_compr_shutdown(). Signed-off-by:
-
Kuninori Morimoto authored
dai_link related function should be implemented at soc-link.c. This patch adds snd_soc_link_compr_startup(). Signed-off-by:
-
