- 03 Apr, 2023 6 commits
-
-
Dario Binacchi authored
The use of the macros M06_REG_ADDR and M06_REG_CMD avoids code duplication without impacting the application load, and reduces the chances of errors or mistakes. Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> Link: https://lore.kernel.org/r/20230402200951.1032513-6-dario.binacchi@amarulasolutions.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Dario Binacchi authored
There is no need to recalculate the CRC when the data has not changed. Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> Link: https://lore.kernel.org/r/20230402200951.1032513-5-dario.binacchi@amarulasolutions.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Dario Binacchi authored
It adds spaces around '-' as recommended by the Linux coding style. Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> Link: https://lore.kernel.org/r/20230402200951.1032513-4-dario.binacchi@amarulasolutions.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Dario Binacchi authored
It removes unnecessary blank lines so that checkpatch doesn't complain anymore. Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> Link: https://lore.kernel.org/r/20230402200951.1032513-3-dario.binacchi@amarulasolutions.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Dario Binacchi authored
Matches the alignment to the open parenthesis as suggested by checkpatch. Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> Link: https://lore.kernel.org/r/20230402200951.1032513-2-dario.binacchi@amarulasolutions.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Benjamin Bara authored
When a hard IRQ is triggered, the soft IRQ, which decides if an actual pen down happened, should always be triggered. This enables the usage of "can_sleep" GPIO chips as "pen down" GPIO, as the value is not read during the hard IRQ anymore. This might be the case if the GPIO chip is an expander behind i2c. Signed-off-by: Benjamin Bara <benjamin.bara@skidata.com> Signed-off-by: Richard Leitner <richard.leitner@skidata.com> Link: https://lore.kernel.org/r/20230328-tsc2007-sleep-v5-1-fc55e76d0ced@skidata.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 02 Apr, 2023 4 commits
-
-
Javier Martinez Canillas authored
The input subsystem doesn't currently have any unit tests, let's add a CONFIG_INPUT_KUNIT_TEST option that builds a test suite to be executed with the KUnit test infrastructure. For now, only three tests were added for some of the input core helper functions that are trivial to test: * input_test_polling: set/get poll interval and set-up a poll handler. * input_test_timestamp: set/get input event timestamps. * input_test_match_device_id: match a device by bus, vendor, product, version and events capable of handling. But having the minimal KUnit support allows to add more tests and suites as follow-up changes. The tests can be run with the following command: $ ./tools/testing/kunit/kunit.py run --kunitconfig=drivers/input/tests/ Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Tested-by: Enric Balletbo i Serra <eballetbo@redhat.com> config: powerpc-allnoconfig (https://download.01.org/0day-ci/archive/20230330/202303301815.kRKFM3NH-lkp@intel.com/config) Link: https://lore.kernel.org/r/20230330081831.2291351-1-javierm@redhat.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Hans de Goede authored
Add a new driver for the Novatek i2c touchscreen controller as found on the Acer Iconia One 7 B1-750 tablet. Unfortunately the touchscreen controller model-number is unknown. Even with the tablet opened up it is impossible to read the model-number. Android calls this a "NVT-ts" touchscreen, but that may apply to other Novatek controller models too. This appears to be the same controller as the one supported by https://github.com/advx9600/android/blob/master/touchscreen/NVTtouch_Android4.0/NVTtouch.c but unfortunately that does not give us a model-number either. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Jeff LaBundy <jeff@labundy.com> Link: https://lore.kernel.org/r/20230326212308.55730-1-hdegoede@redhat.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Vicki Pfau authored
Some third-party controllers, such as the HORPIAD FPS for Nintendo Switch and Gamesir-G3w, require a specific packet that the first-party XInput driver sends before it will start sending reports. It's not currently known what this packet does, but since the first-party driver always sends it's unlikely that this could cause issues with existing controllers. Co-authored-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Vicki Pfau <vi@endrift.com> Link: https://lore.kernel.org/r/20230324040446.3487725-3-vi@endrift.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Pierre-Loup A. Griffais authored
They act that way in PC mode. Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Pierre-Loup A. Griffais <pgriffais@valvesoftware.com> Signed-off-by: Vicki Pfau <vi@endrift.com> Link: https://lore.kernel.org/r/20230324040446.3487725-2-vi@endrift.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 24 Mar, 2023 3 commits
-
-
Rob Herring authored
Cleanup bindings dropping unneeded quotes. Once all these are fixed, checking for this can be enabled in yamllint. Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> # for mediatek,mt6779-keypad.yaml Link: https://lore.kernel.org/r/20230320234718.2930154-1-robh@kernel.orgSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Vicki Pfau authored
This adds support for the Turtle Beach REACT-R and Recon Xbox controllers Signed-off-by: Vicki Pfau <vi@endrift.com> Link: https://lore.kernel.org/r/20230225012147.276489-4-vi@endrift.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Vicki Pfau authored
The list of specific VID/PID combinations for various controllers recently added a new field "xtype". However, this field isn't used, nor filled in the table itself, and was likely added by mistake and overlooked during review. Since this field isn't used, it's safe to remove. Signed-off-by: Vicki Pfau <vi@endrift.com> Link: https://lore.kernel.org/r/20230225012147.276489-3-vi@endrift.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 20 Mar, 2023 1 commit
-
-
Uwe Kleine-König authored
If a platform driver's remove callback returns non-zero the driver core emits an error message. In such a case however iqs62x_keys_remove() already issued a (better) message. So return zero to suppress the generic message. This patch has no other side effects as platform_remove() ignores the return value of .remove() after the warning. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20230318225110.261439-1-u.kleine-koenig@pengutronix.deSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 17 Mar, 2023 10 commits
-
-
Krzysztof Kozlowski authored
The driver can match only via the DT table so the table should be always used and the of_match_ptr does not have any sense (this also allows ACPI matching via PRP0001, even though it might not be relevant here). This also fixes !CONFIG_OF error: Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230312131514.351603-4-krzysztof.kozlowski@linaro.orgSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Krzysztof Kozlowski authored
The driver can match only via the DT table so the table should be always used and the of_match_ptr does not have any sense (this also allows ACPI matching via PRP0001, even though it might not be relevant here). This also fixes !CONFIG_OF error: drivers/input/touchscreen/sun4i-ts.c:392:34: error: ‘sun4i_ts_of_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20230312131514.351603-3-krzysztof.kozlowski@linaro.orgSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Krzysztof Kozlowski authored
The driver will match mostly by DT table (even thought there is regular ID table) so there is little benefit in of_match_ptr (this also allows ACPI matching via PRP0001, even though it might not be relevant here). This also fixes !CONFIG_OF error: drivers/input/keyboard/tm2-touchkey.c:335:34: error: ‘tm2_touchkey_of_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230312131514.351603-2-krzysztof.kozlowski@linaro.orgSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Krzysztof Kozlowski authored
The driver can match only via the DT table so the table should be always used and the of_match_ptr does not have any sense (this also allows ACPI matching via PRP0001, even though it might not be relevant here). This also fixes !CONFIG_OF error: drivers/input/keyboard/st-keyscan.c:251:34: error: ‘keyscan_of_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230312131514.351603-1-krzysztof.kozlowski@linaro.orgSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Rob Herring authored
It is preferred to use typed property access functions (i.e. of_property_read_<type> functions) rather than low-level of_get_property/of_find_property functions for reading properties. As part of this, convert of_get_property/of_find_property calls to the recently added of_property_present() helper when we just want to test for presence of a property and nothing more. Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20230310144708.1542682-1-robh@kernel.orgSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Rob Herring authored
It is preferred to use typed property access functions (i.e. of_property_read_<type> functions) rather than low-level of_get_property/of_find_property functions for reading properties. Convert reading boolean properties to of_property_read_bool(). Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20230310144708.1542751-1-robh@kernel.orgSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Dmitry Torokhov authored
Merge with mainline to get of_property_present() and other newer APIs.
-
Hans de Goede authored
The HiDeep IST940E touchscreen controller used on the Lenovo Yoga Book X90F convertible comes up in HID mode by default. This works well on the X91F Windows model where the touchscreen is correctly described in ACPI and ACPI takes care of controlling the reset GPIO and regulators. But the X90F ships with Android and the ACPI tables on this model don't describe the touchscreen. Instead this is hardcoded in the vendor kernel. The vendor kernel uses the touchscreen in native HiDeep 20 (2.0?) protocol mode and switches the controller to this mode by writing 0 to reg 0x081e. Adjusting the i2c-hid code to deal with the reset-gpio and regulators on this non devicetree (but rather broken ACPI) convertible is somewhat tricky and the native protocol reports ABS_MT_PRESSURE and ABS_MT_TOUCH_MAJOR which are not reported in HID mode, so it is preferable to use the native mode. Add support to the hideep driver to reset the work-mode to the native HiDeep protocol to allow using it on the Lenovo Yoga Book X90F. This is guarded behind a new "hideep,force-native-protocol" boolean property, to avoid changing behavior on other devices. For the record: I did test using the i2c-hid driver with some quick hacks and it does work. The I2C-HID descriptor is available from address 0x0020, just like on the X91F Windows model. So far the new "hideep,force-native-protocol" property is only used on x86/ACPI (non devicetree) devs. IOW it is not used in actual devicetree files. The devicetree-bindings maintainers have requested properties like these to not be added to the devicetree-bindings, so the new property is deliberately not added to the existing devicetree-bindings. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20230311114726.182789-3-hdegoede@redhat.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Hans de Goede authored
On some models the first HIDEEP_SYSCON_WDT_CON write alone is enough to cause the controller to reset, causing the second write to fail: i2c-hideep_ts: write to register 0x52000014 (0x000001) failed: -121 Switch this write to a raw hideep_pgm_w_mem() to avoid an error getting logged in this case. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20230311114726.182789-2-hdegoede@redhat.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Yang Li authored
Turn the space into a tab to Eliminate the follow smatch warning: drivers/input/touchscreen/hideep.c:470 hideep_program_nvm() warn: inconsistent indenting Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Link: https://lore.kernel.org/r/20220429070103.4747-1-yang.lee@linux.alibaba.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 12 Mar, 2023 12 commits
-
-
Linus Torvalds authored
-
Hector Martin authored
This reverts part of commit 015b8cc5 ("wifi: cfg80211: Fix use after free for wext") This commit broke WPA offload by unconditionally clearing the crypto modes for non-WEP connections. Drop that part of the patch. Signed-off-by: Hector Martin <marcan@marcan.st> Reported-by: Ilya <me@0upti.me> Reported-and-tested-by: Janne Grunau <j@jannau.net> Reviewed-by: Eric Curtin <ecurtin@redhat.com> Fixes: 015b8cc5 ("wifi: cfg80211: Fix use after free for wext") Cc: stable@kernel.org Link: https://lore.kernel.org/linux-wireless/ZAx0TWRBlGfv7pNl@kroah.com/T/#m11e6e0915ab8fa19ce8bc9695ab288c0fe018edfSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmddLinus Torvalds authored
Pull tpm fixes from Jarkko Sakkinen: "Two additional bug fixes for v6.3" * tag 'tpm-v6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd: tpm: disable hwrng for fTPM on some AMD designs tpm/eventlog: Don't abort tpm_read_log on faulty ACPI address
-
Mario Limonciello authored
AMD has issued an advisory indicating that having fTPM enabled in BIOS can cause "stuttering" in the OS. This issue has been fixed in newer versions of the fTPM firmware, but it's up to system designers to decide whether to distribute it. This issue has existed for a while, but is more prevalent starting with kernel 6.1 because commit b006c439 ("hwrng: core - start hwrng kthread also for untrusted sources") started to use the fTPM for hwrng by default. However, all uses of /dev/hwrng result in unacceptable stuttering. So, simply disable registration of the defective hwrng when detecting these faulty fTPM versions. As this is caused by faulty firmware, it is plausible that such a problem could also be reproduced by other TPM interactions, but this hasn't been shown by any user's testing or reports. It is hypothesized to be triggered more frequently by the use of the RNG because userspace software will fetch random numbers regularly. Intentionally continue to register other TPM functionality so that users that rely upon PCR measurements or any storage of data will still have access to it. If it's found later that another TPM functionality is exacerbating this problem a module parameter it can be turned off entirely and a module parameter can be introduced to allow users who rely upon fTPM functionality to turn it on even though this problem is present. Link: https://www.amd.com/en/support/kb/faq/pa-410 Link: https://bugzilla.kernel.org/show_bug.cgi?id=216989 Link: https://lore.kernel.org/all/20230209153120.261904-1-Jason@zx2c4.com/ Fixes: b006c439 ("hwrng: core - start hwrng kthread also for untrusted sources") Cc: stable@vger.kernel.org Cc: Jarkko Sakkinen <jarkko@kernel.org> Cc: Thorsten Leemhuis <regressions@leemhuis.info> Cc: James Bottomley <James.Bottomley@hansenpartnership.com> Tested-by: reach622@mailcuk.com Tested-by: Bell <1138267643@qq.com> Co-developed-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
-
Morten Linderud authored
tpm_read_log_acpi() should return -ENODEV when no eventlog from the ACPI table is found. If the firmware vendor includes an invalid log address we are unable to map from the ACPI memory and tpm_read_log() returns -EIO which would abort discovery of the eventlog. Change the return value from -EIO to -ENODEV when acpi_os_map_iomem() fails to map the event log. The following hardware was used to test this issue: Framework Laptop (Pre-production) BIOS: INSYDE Corp, Revision: 3.2 TPM Device: NTC, Firmware Revision: 7.2 Dump of the faulty ACPI TPM2 table: [000h 0000 4] Signature : "TPM2" [Trusted Platform Module hardware interface Table] [004h 0004 4] Table Length : 0000004C [008h 0008 1] Revision : 04 [009h 0009 1] Checksum : 2B [00Ah 0010 6] Oem ID : "INSYDE" [010h 0016 8] Oem Table ID : "TGL-ULT" [018h 0024 4] Oem Revision : 00000002 [01Ch 0028 4] Asl Compiler ID : "ACPI" [020h 0032 4] Asl Compiler Revision : 00040000 [024h 0036 2] Platform Class : 0000 [026h 0038 2] Reserved : 0000 [028h 0040 8] Control Address : 0000000000000000 [030h 0048 4] Start Method : 06 [Memory Mapped I/O] [034h 0052 12] Method Parameters : 00 00 00 00 00 00 00 00 00 00 00 00 [040h 0064 4] Minimum Log Length : 00010000 [044h 0068 8] Log Address : 000000004053D000 Fixes: 0cf577a0 ("tpm: Fix handling of missing event log") Tested-by: Erkki Eilonen <erkki@bearmetal.eu> Signed-off-by: Morten Linderud <morten@linderud.pw> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
-
git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds authored
Pull xfs fixes from Darrick Wong: - Fix a crash if mount time quotacheck fails when there are inodes queued for garbage collection. - Fix an off by one error when discarding folios after writeback failure. * tag 'xfs-6.3-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: xfs: fix off-by-one-block in xfs_discard_folio() xfs: quotacheck failure can race with background inode inactivation
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/stagingLinus Torvalds authored
Pull staging driver fixes and removal from Greg KH: "Here are four small staging driver fixes, and one big staging driver deletion for 6.3-rc2. The fixes are: - rtl8192e driver fixes for where the driver was attempting to execute various programs directly from the disk for unknown reasons - rtl8723bs driver fixes for issues found by Hans in testing The deleted driver is the removal of the r8188eu wireless driver as now in 6.3-rc1 we have a "real" wifi driver for one that includes support for many many more devices than this old driver did. So it's time to remove it as it is no longer needed. The maintainers of this driver all have acked its removal. Many thanks to them over the years for working to clean it up and keep it working while the real driver was being developed. All of these have been in linux-next this week with no reported problems" * tag 'staging-6.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: r8188eu: delete driver staging: rtl8723bs: Pass correct parameters to cfg80211_get_bss() staging: rtl8723bs: Fix key-store index handling staging: rtl8192e: Remove call_usermodehelper starting RadioPower.sh staging: rtl8192e: Remove function ..dm_check_ac_dc_power calling a script
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fix from Borislav Petkov: "A single erratum fix for AMD machines: - Disable XSAVES on AMD Zen1 and Zen2 machines due to an erratum. No impact to anything as those machines will fallback to XSAVEC which is equivalent there" * tag 'x86_urgent_for_v6.3_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/CPU/AMD: Disable XSAVES on AMD family 0x17
-
Linus Torvalds authored
Pull clone3 fix from Christian Brauner: "A simple fix for the clone3() system call. The CLONE_NEWTIME allows the creation of time namespaces. The flag reuses a bit from the CSIGNAL bits that are used in the legacy clone() system call to set the signal that gets sent to the parent after the child exits. The clone3() system call doesn't rely on CSIGNAL anymore as it uses a dedicated .exit_signal field in struct clone_args. So we blocked all CSIGNAL bits in clone3_args_valid(). When CLONE_NEWTIME was introduced and reused a CSIGNAL bit we forgot to adapt clone3_args_valid() causing CLONE_NEWTIME with clone3() to be rejected. Fix this" * tag 'kernel.fork.v6.3-rc2' of gitolite.kernel.org:pub/scm/linux/kernel/git/brauner/linux: selftests/clone3: test clone3 with CLONE_NEWTIME fork: allow CLONE_NEWTIME in clone3 flags
-
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmappingLinus Torvalds authored
Pull vfs fixes from Christian Brauner: - When allocating pages for a watch queue failed, we didn't return an error causing userspace to proceed even though all subsequent notifcations would be lost. Make sure to return an error. - Fix a misformed tree entry for the idmapping maintainers entry. - When setting file leases from an idmapped mount via generic_setlease() we need to take the idmapping into account otherwise taking a lease would fail from an idmapped mount. - Remove two redundant assignments, one in splice code and the other in locks code, that static checkers complained about. * tag 'vfs.misc.v6.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping: filelocks: use mount idmapping for setlease permission check fs/locks: Remove redundant assignment to cmd splice: Remove redundant assignment to ret MAINTAINERS: repair a malformed T: entry in IDMAPPED MOUNTS watch_queue: fix IOC_WATCH_QUEUE_SET_SIZE alloc error paths
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4Linus Torvalds authored
Pull ext4 fixes from Ted Ts'o: "Bug fixes and regressions for ext4, the most serious of which is a potential deadlock during directory renames that was introduced during the merge window discovered by a combination of syzbot and lockdep" * tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: zero i_disksize when initializing the bootloader inode ext4: make sure fs error flag setted before clear journal error ext4: commit super block if fs record error when journal record without error ext4, jbd2: add an optimized bmap for the journal inode ext4: fix WARNING in ext4_update_inline_data ext4: move where set the MAY_INLINE_DATA flag is set ext4: Fix deadlock during directory rename ext4: Fix comment about the 64BIT feature docs: ext4: modify the group desc size to 64 ext4: fix another off-by-one fsmap error on 1k block filesystems ext4: fix RENAME_WHITEOUT handling for inline directories ext4: make kobj_type structures constant ext4: fix cgroup writeback accounting with fs-layer encryption
-
Linus Torvalds authored
The cpumask_check() was unnecessarily tight, and causes problems for the users of cpumask_next(). We have a number of users that take the previous return value of one of the bit scanning functions and subtract one to keep it in "range". But since the scanning functions end up returning up to 'small_cpumask_bits' instead of the tighter 'nr_cpumask_bits', the range really needs to be using that widened form. [ This "previous-1" behavior is also the reason we have all those comments about /* -1 is a legal arg here. */ and separate checks for that being ok. So we could have just made "small_cpumask_bits-1" be a similar special "don't check this" value. Tetsuo Handa even suggested a patch that only does that for cpumask_next(), since that seems to be the only actual case that triggers, but that all makes it even _more_ magical and special. So just relax the check ] One example of this kind of pattern being the 'c_start()' function in arch/x86/kernel/cpu/proc.c, but also duplicated in various forms on other architectures. Reported-by: syzbot+96cae094d90877641f32@syzkaller.appspotmail.com Link: https://syzkaller.appspot.com/bug?extid=96cae094d90877641f32Reported-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Link: https://lore.kernel.org/lkml/c1f4cc16-feea-b83c-82cf-1a1f007b7eb9@I-love.SAKURA.ne.jp/ Fixes: 596ff4a0 ("cpumask: re-introduce constant-sized cpumask optimizations") Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
- 11 Mar, 2023 4 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds authored
Pull i2c updates from Wolfram Sang: "This marks the end of a transition to let I2C have the same probe semantics as other subsystems. Uwe took care that no drivers in the current tree nor in -next use the deprecated .probe call. So, it is a good time to switch to the new, standard semantics now. There is also a regression fix: - regression fix for the notifier handling of the I2C core - final coversions of drivers away from deprecated .probe - make .probe_new the standard probe and convert I2C core to use it * tag 'i2c-for-6.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: dev: Fix bus callback return values i2c: Convert drivers to new .probe() callback i2c: mux: Convert all drivers to new .probe() callback i2c: Switch .probe() to not take an id parameter media: i2c: ov2685: convert to i2c's .probe_new() media: i2c: ov5695: convert to i2c's .probe_new() w1: ds2482: Convert to i2c's .probe_new() serial: sc16is7xx: Convert to i2c's .probe_new() mtd: maps: pismo: Convert to i2c's .probe_new() misc: ad525x_dpot-i2c: Convert to i2c's .probe_new()
-
Richard Weinberger authored
Switching to BLK_MQ_F_BLOCKING wrongly removed the call to blk_mq_end_request(). Add it back to have our IOs finished Fixes: 91cc8fbc ("ubi: block: set BLK_MQ_F_BLOCKING") Analyzed-by: Linus Torvalds <torvalds@linux-foundation.org> Reported-by: Daniel Palmer <daniel@0x0f.com> Link: https://lore.kernel.org/linux-mtd/CAHk-=wi29bbBNh3RqJKu3PxzpjDN5D5K17gEVtXrb7-6bfrnMQ@mail.gmail.com/Signed-off-by: Richard Weinberger <richard@nod.at> Reviewed-by: Christoph Hellwig <hch@lst.de> Tested-by: Daniel Palmer <daniel@0x0f.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Zhihao Cheng authored
If the boot loader inode has never been used before, the EXT4_IOC_SWAP_BOOT inode will initialize it, including setting the i_size to 0. However, if the "never before used" boot loader has a non-zero i_size, then i_disksize will be non-zero, and the inconsistency between i_size and i_disksize can trigger a kernel warning: WARNING: CPU: 0 PID: 2580 at fs/ext4/file.c:319 CPU: 0 PID: 2580 Comm: bb Not tainted 6.3.0-rc1-00004-g703695902cfa RIP: 0010:ext4_file_write_iter+0xbc7/0xd10 Call Trace: vfs_write+0x3b1/0x5c0 ksys_write+0x77/0x160 __x64_sys_write+0x22/0x30 do_syscall_64+0x39/0x80 Reproducer: 1. create corrupted image and mount it: mke2fs -t ext4 /tmp/foo.img 200 debugfs -wR "sif <5> size 25700" /tmp/foo.img mount -t ext4 /tmp/foo.img /mnt cd /mnt echo 123 > file 2. Run the reproducer program: posix_memalign(&buf, 1024, 1024) fd = open("file", O_RDWR | O_DIRECT); ioctl(fd, EXT4_IOC_SWAP_BOOT); write(fd, buf, 1024); Fix this by setting i_disksize as well as i_size to zero when initiaizing the boot loader inode. Link: https://bugzilla.kernel.org/show_bug.cgi?id=217159 Cc: stable@kernel.org Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com> Link: https://lore.kernel.org/r/20230308032643.641113-1-chengzhihao1@huawei.comSigned-off-by: Theodore Ts'o <tytso@mit.edu>
-
Ye Bin authored
Now, jounral error number maybe cleared even though ext4_commit_super() failed. This may lead to error flag miss, then fsck will miss to check file system deeply. Signed-off-by: Ye Bin <yebin10@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20230307061703.245965-3-yebin@huaweicloud.com
-