Add a helper to map the source scatterlist into the descriptor.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Add a helper function to perform the descriptor allocation.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Strictly, dma_map_sg() may coalesce SG entries, but in practise on iMX
hardware, this will never happen.  However, dma_map_sg() can fail, and
we completely fail to check its return value.  So, fix this properly.

Arrange the code to map the scatterlist early, so we know how many
scatter table entries to allocate, and then fill them in.  This allows
us to keep relatively simple error cleanup paths.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Ensure that we clean up allocations and DMA mappings after encountering
an error rather than just giving up and leaking memory and resources.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Since the extended descriptor includes the hardware descriptor, and the
sec4 scatterlist immediately follows this, we can declare it as a array
at the very end of the extended descriptor.  This allows us to get rid
of an initialiser for every site where we allocate an extended
descriptor.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Mark the hardware descriptor as being cache line aligned; on DMA
incoherent architectures, the hardware descriptor should sit in a
separate cache line from the CPU accessed data to avoid polluting
the caches.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Rather than giving the descriptor as hw_desc[0], give it's real size.
All places where we allocate an ahash_edesc incorporate DESC_JOB_IO_LEN
bytes of job descriptor.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

caamhash contains this weird code:

	src_nents = sg_count(req->src, req->nbytes);
	dma_map_sg(jrdev, req->src, src_nents ? : 1, DMA_TO_DEVICE);
	...
	edesc->src_nents = src_nents;

sg_count() returns zero when sg_nents_for_len() returns zero or one.
This means we don't need to use a hardware scatterlist.  However,
setting src_nents to zero causes problems when we unmap:

	if (edesc->src_nents)
		dma_unmap_sg_chained(dev, req->src, edesc->src_nents,
				     DMA_TO_DEVICE, edesc->chained);

as zero here means that we have no entries to unmap.  This causes us
to leak DMA mappings, where we map one scatterlist entry and then
fail to unmap it.

This can be fixed in two ways: either by writing the number of entries
that were requested of dma_map_sg(), or by reworking the "no SG
required" case.

We adopt the re-work solution here - we replace sg_count() with
sg_nents_for_len(), so src_nents now contains the real number of
scatterlist entries, and we then change the test for using the
hardware scatterlist to src_nents > 1 rather than just non-zero.

This change passes my sshd, openssl tests hashing /bin and tcrypt
tests.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Properly allocate enough memory to respect the fallback.
Signed-off-by: Will Thomas <will.thomas@imgtec.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Currently the probe function only emits an output on success
when debug is specifically enabled. It would be more useful
if this happens by default.
Signed-off-by: James Hartley <james.hartley@imgtec.com>
Reviewed-by: Will Thomas <will.thomas@imgtec.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Currently the img-hash accelerator does not probe
successfully due to a change in the checks made during
registration with the crypto framework. This is due to
import and export functions not being defined. Correct
this.
Signed-off-by: James Hartley <james.hartley@imgtec.com>
Signed-off-by: Will Thomas <will.thomas@imgtec.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Current img hash claims sys and periph gate clocks
and this can be gated in system suspend scenarios.

Add support for Device pm ops for img hash to gate
the clocks claimed by img hash.
Signed-off-by: Govindraj Raja <Govindraj.Raja@imgtec.com>
Reviewed-by: Will Thomas <will.thomas@imgtec.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Burst length of 16 drives the hash accelerator out of spec
and causes stability issues in some cases. Reduce this to
stop data being lost.
Signed-off-by: Will Thomas <will.thomas@imgtec.com>
Reviewed-by: James Hartley <james.hartley@imgtec.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Move 0 length buffer to end of structure to stop overwriting
fallback request data. This doesn't cause a bug itself as the
buffer is never used alongside the fallback but should be
changed.
Signed-off-by: Will Thomas <will.thomas@imgtec.com>
Reviewed-by: James Hartley <james.hartley@imgtec.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Sporadic null pointer exceptions came from here. Fix them.
Signed-off-by: Will Thomas <will.thomas@imgtec.com>
Reviewed-by: James Hartley <james.hartley@imgtec.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

"if (!ret == template[i].fail)" is confusing to compilers (gcc5):

crypto/testmgr.c: In function '__test_aead':
crypto/testmgr.c:531:12: warning: logical not is only applied to the
left hand side of comparison [-Wlogical-not-parentheses]
   if (!ret == template[i].fail) {
            ^

Let there be 'if (template[i].fail == !ret) '.
Signed-off-by: Yanjiang Jin <yanjiang.jin@windriver.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

A second CCP is available, identical to the first, with
its ownn PCI ID. Make it available for use by the crypto
subsystem, as well as for DMA activity and random
number generation.

This device is not pre-configured at at boot time. The
driver must configure it (during the probe) for use.
Signed-off-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Every CCP is capable of providing general DMA services.
Register the device as a provider.
Signed-off-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Signed-off-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Enable equivalent function on a v5 CCP. Add support for a
version 5 CCP which enables AES/XTS/SHA services. Also,
more work on the data structures to virtualize
functionality.
Signed-off-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Available queue space is used to decide (by counting free slots)
if we have to put a command on hold or if it can be sent
to the engine immediately.
Signed-off-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Make the RNG support code common (where possible) in
preparation for adding a v5 device.
Signed-off-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Move the KSB access/management functions to the v3
device file, and add function pointers to the actions
structure. At the operations layer all of the references
to the storage block will be generic (virtual). This is
in preparation for a version 5 device, in which the
private storage block is managed differently.
Signed-off-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Form and use of the local storage block in the CCP is
particular to the device version. Much of the code that
accesses the storage block can treat it as a virtual
resource, and will under go some renaming. Device-specific
access to the memory will be moved into device file.
Service functions will be added to the actions
structure.
Signed-off-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Use more concise field names; "perform_" is too verbose.
Signed-off-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Device-specific values for the BAR and offset should be found
in the version data structure.
Signed-off-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Adhere to the cryptodev comment convention.
Signed-off-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Most error branches following the call to npe_request contain a call to
npe_request. This patch add a call to npe_release to error branches
following the call to npe_request that do not have it.

This issue was found with Hector.
Signed-off-by: Quentin Lambert <lambert.quentin@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Signed-off-by: Quentin Lambert <lambert.quentin@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Since 6de62f15 ("crypto: algif_hash - Require setkey before
accept(2)"), the AF_ALG interface requires userspace to provide a key
to any algorithm that has a setkey method.  However, the non-HMAC
algorithms are not keyed, so setting a key is unnecessary.

Fix this by removing the setkey method from the non-keyed hash
algorithms.

Fixes: 6de62f15 ("crypto: algif_hash - Require setkey before accept(2)")
Cc: <stable@vger.kernel.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The optimised crc32c implementation depends on VMX (aka. Altivec)
instructions, so the kernel must be built with Altivec support in order
for the crc32c code to build.

Fixes: 6dd7a82c ("crypto: powerpc - Add POWER8 optimised crc32c")
Acked-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

To be able to generate shared descriptors for AEAD, the authentication size
needs to be known. However, there is no imposed order of calling .setkey,
.setauthsize callbacks.

Thus, in case authentication size is not known at .setkey time, defer it
until .setauthsize is called.

The authsize != 0 check was incorrectly removed when converting the driver
to the new AEAD interface.

Cc: <stable@vger.kernel.org> # 4.3+
Fixes: 479bcc7c ("crypto: caam - Convert authenc to new AEAD interface")
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

There are a few things missed by the conversion to the
new AEAD interface:

1 - echainiv(authenc) encrypt shared descriptor

The shared descriptor is incorrect: due to the order of operations,
at some point in time MATH3 register is being overwritten.

2 - buffer used for echainiv(authenc) encrypt shared descriptor

Encrypt and givencrypt shared descriptors (for AEAD ops) are mutually
exclusive and thus use the same buffer in context state: sh_desc_enc.

However, there's one place missed by s/sh_desc_givenc/sh_desc_enc,
leading to errors when echainiv(authenc(...)) algorithms are used:
DECO: desc idx 14: Header Error. Invalid length or parity, or
certain other problems.

While here, also fix a typo: dma_mapping_error() is checking
for validity of sh_desc_givenc_dma instead of sh_desc_enc_dma.

Cc: <stable@vger.kernel.org> # 4.3+
Fixes: 479bcc7c ("crypto: caam - Convert authenc to new AEAD interface")
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

On 32-bit (e.g. with m68k-linux-gnu-gcc-4.1):

    crypto/sha3_generic.c:27: warning: integer constant is too large for ‘long’ type
    crypto/sha3_generic.c:28: warning: integer constant is too large for ‘long’ type
    crypto/sha3_generic.c:29: warning: integer constant is too large for ‘long’ type
    crypto/sha3_generic.c:29: warning: integer constant is too large for ‘long’ type
    crypto/sha3_generic.c:31: warning: integer constant is too large for ‘long’ type
    crypto/sha3_generic.c:31: warning: integer constant is too large for ‘long’ type
    crypto/sha3_generic.c:32: warning: integer constant is too large for ‘long’ type
    crypto/sha3_generic.c:32: warning: integer constant is too large for ‘long’ type
    crypto/sha3_generic.c:32: warning: integer constant is too large for ‘long’ type
    crypto/sha3_generic.c:33: warning: integer constant is too large for ‘long’ type
    crypto/sha3_generic.c:33: warning: integer constant is too large for ‘long’ type
    crypto/sha3_generic.c:34: warning: integer constant is too large for ‘long’ type
    crypto/sha3_generic.c:34: warning: integer constant is too large for ‘long’ type

Fixes: 53964b9e ("crypto: sha3 - Add SHA-3 hash algorithm")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Pull more block fixes from Jens Axboe:
 "As mentioned in the pull the other day, a few more fixes for this
  round, all related to the bio op changes in this series.

  Two fixes, and then a cleanup, renaming bio->bi_rw to bio->bi_opf.  I
  wanted to do that change right after or right before -rc1, so that
  risk of conflict was reduced.  I just rebased the series on top of
  current master, and no new ->bi_rw usage has snuck in"

* 'for-linus' of git://git.kernel.dk/linux-block:
  block: rename bio bi_rw to bi_opf
  target: iblock_execute_sync_cache() should use bio_set_op_attrs()
  mm: make __swap_writepage() use bio_set_op_attrs()
  block/mm: make bdev_ops->rw_page() take a bool for read/write

Pull drm zpos property support from Dave Airlie:
 "This tree was waiting on some media stuff I hadn't had time to get a
  stable branchpoint off, so I just waited until it was all in your tree
  first.

  It's been around a bit on the list and shouldn't affect anything
  outside adding the generic API and moving some ARM drivers to using
  it"

* tag 'drm-for-v4.8-zpos' of git://people.freedesktop.org/~airlied/linux:
  drm: rcar: use generic code for managing zpos plane property
  drm/exynos: use generic code for managing zpos plane property
  drm: sti: use generic zpos for plane
  drm: add generic zpos property

Since commit 63a4cc24, bio->bi_rw contains flags in the lower
portion and the op code in the higher portions. This means that
old code that relies on manually setting bi_rw is most likely
going to be broken. Instead of letting that brokeness linger,
rename the member, to force old and out-of-tree code to break
at compile time instead of at runtime.

No intended functional changes in this commit.
Signed-off-by: Jens Axboe <axboe@fb.com>