- 18 Sep, 2022 26 commits
-
-
Tomer Tayar authored
Several munmap() calls can be done or a mapped H/W block that has a larger size than a page size. Releasing the object should be done only when all mapped range is unmapped. Signed-off-by:
Tomer Tayar <ttayar@habana.ai> Reviewed-by:
Oded Gabbay <ogabbay@kernel.org> Signed-off-by:
-
Dani Liberman authored
Since hwmon fini code is common for all asics, unified it to common function. Signed-off-by:
Dani Liberman <dliberman@habana.ai> Reviewed-by:
-
Tal Cohen authored
The current flow of halting the engine cores is implemented by command buffers built by the user space and sent towards the Driver. This current flow is broken since the user space does not know when the cores actually halt as sending a workload is async op. Therefore the application can not free the memory that is mapped to the engine cores. This new API allows the user space to control the running mode. The API call is sync (returns after the cores are set to the requested mode). Signed-off-by:
Tal Cohen <talcohen@habana.ai> Reviewed-by:
-
Oded Gabbay authored
There is some left-over code from the gaudi2 bring-up that wasn't removed so far. Signed-off-by: -
farah kassabri authored
On Gaudi2 the f/w always configures the PCIe iATU and allows access to scratchpad registers. Therefore, we can know if the f/w is secured by reading a status bit from the f/w registers. Signed-off-by:
farah kassabri <fkassabri@habana.ai> Reviewed-by:
-
Oded Gabbay authored
A common function that is called from multiple places can't be located in degugfs.c because that file is only compiled if debugfs is enabled in the kernel config file. This can lead to undefined symbol compilation error. Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
-
Oded Gabbay authored
Cosmetic change to move the eventfd events defines to a better location in the file, closer to other INFO IOCTL defines. Signed-off-by: -
Tomer Tayar authored
Add a missing lock in hl_device_resume() when it assigns a value to the 'in_reset' indication. Signed-off-by:
-
Tomer Tayar authored
In hl_hw_block_mmap(), the vma's 'vm_private_data' and 'vm_ops' fields are assigned before filling the content of the private data. In between there is a call to the ASIC hw_block_mmap() function, and if it fails, the vma close function will be called with a bad private data value. Fix the order of assignments to avoid this issue. In hl_hw_block_mmap() the vma's 'vm_private_data and vm_ops are assigned before setting the Signed-off-by:
-
Tomer Tayar authored
map_block() sets the block id handle even if get_hw_block_id() fails, and in this case it uses block id 0 which might be a valid id. Modify it to set the handle only if get_hw_block_id() succeeds. Signed-off-by:
-
Tal Cohen authored
When a CS is submitted, the ioctl handler checks the CS flags and performs a sanity check, according to its value. As new CS flags are added, the sanity check needs to be updated according to the new flags. Signed-off-by:
-
Ohad Sharabi authored
Even when running with unsecured f/w, we should read the PLL div_sel value from the f/w as this register is always privileged. Signed-off-by:
Ohad Sharabi <osharabi@habana.ai> Reviewed-by:
-
Ohad Sharabi authored
Print format was for int (%d) while variable is u32. Signed-off-by:
-
Tomer Tayar authored
F/W events are enabled in a late phase of the device init, so an event for a PCIE access error during the init, can be received after the init is already done and considered as successful. A resulting device reset, which does the same H/W init, can end similarly with this event right after the reset is done and considered as successful, and a loop of this sequence can continue. To avoid it mark the PCIE access error as a fatal event, so after 2 consecutive events no more resets will be done. Signed-off-by:
-
Dani Liberman authored
Currently, to get engines status, user needed to read debugfs file with root permissions. This new uapi allows user apace apps retrieve status, so for example, in case of failure, status can be retrieved immediately by the application itself which runs without root permissions. Signed-off-by:
-
Oded Gabbay authored
We don't use KDMA concurrently in the driver. The only use is through debugfs and we don't protect concurrent access through it. Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Ohad Sharabi authored
The macro argument <val> is cast-ed to u32 in some of the places. Because this arg can be some arithmetic computation (e.g. address + offset) the cast should be on the whole expression. Signed-off-by:
-
Bharat Jauhari authored
Cosmetic commit, no logical changes. It just fixes the spelling mistakes. Signed-off-by:
Bharat Jauhari <bjauhari@habana.ai> Reviewed-by:
-
Ofir Bitton authored
Interrupt enumration has changed some time ago but the old mapping was accidentally left in the driver. Signed-off-by:
Ofir Bitton <obitton@habana.ai> Reviewed-by:
-
Oded Gabbay authored
In order to improve scalability and reduce host overhead, it is better to increase the default TDR timeout of Gaudi1 from 30 seconds to 10 minutes. This will allow the DL Framework (e.g. PyTorch, TensorFlow) to remove the host sync they are using now and improve overall performance on scaleout training. Note that one can always set the timeout to a custom value via a kernel module parameter given during driver load. Signed-off-by: -
Ohad Sharabi authored
Up until now the module iterator called void callback functions and so caller activating callback that may fail suffered from 2 issues: 1. The need to "plant" return called in the private data. This is a drawback since the iterator itself should not be aware of the private data of the caller. 2. Due to 1 even in a failure the iterator would keep iterating instead of break upon error. To overcome this an optional rc field added to the iterator context. Signed-off-by:
-
Tomer Tayar authored
Currently only part of the MMU SPI/SEI interrupts are enabled, although there is no real reason to not enable all. The only exception is "burst_fifo_full" which is expected for PMMU because it has a 2 entries FIFO, and thus is it not enabled for it. Signed-off-by:
-
Ofir Bitton authored
In order to be more explicit we should use the term compute_reset for describing the reset in which only the compute engines gets reset. Signed-off-by:
-
Colin Ian King authored
There is a spelling mistake in a dev_dbg message. Fix it. Signed-off-by:
Colin Ian King <colin.i.king@gmail.com> Reviewed-by:
-
Yang Li authored
Fix the following coccicheck warning: ./drivers/misc/habanalabs/gaudi2/gaudi2.c:9727:48-53: WARNING: conversion to bool not needed here Signed-off-by:
Yang Li <yang.lee@linux.alibaba.com> Reviewed-by:
-
Dani Liberman authored
Change is_idle functions so it would be more usable outside debugfs. Do this by replacing seq_file parameter with regular string. Signed-off-by:
-
- 09 Sep, 2022 13 commits
-
-
Xuezhi Zhang authored
Follow the advice of the Documentation/filesystems/sysfs.rst and show() should only use sysfs_emit() or sysfs_emit_at() when formatting the value to be returned to user space. Signed-off-by:
Xuezhi Zhang <zhangxuezhi1@coolpad.com> Link: https://lore.kernel.org/r/20220901013423.418464-1-zhangxuezhi3@gmail.comSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Shunsuke Mie authored
The dma_map_single() doesn't permit zero length mapping. It causes a follow panic. A panic was reported on arm64: [ 60.137988] ------------[ cut here ]------------ [ 60.142630] kernel BUG at kernel/dma/swiotlb.c:624! [ 60.147508] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [ 60.152992] Modules linked in: dw_hdmi_cec crct10dif_ce simple_bridge rcar_fdp1 vsp1 rcar_vin videobuf2_vmalloc rcar_csi2 v4l 2_mem2mem videobuf2_dma_contig videobuf2_memops pci_endpoint_test videobuf2_v4l2 videobuf2_common rcar_fcp v4l2_fwnode v4l2_asyn c videodev mc gpio_bd9571mwv max9611 pwm_rcar ccree at24 authenc libdes phy_rcar_gen3_usb3 usb_dmac display_connector pwm_bl [ 60.186252] CPU: 0 PID: 508 Comm: pcitest Not tainted 6.0.0-rc1rpci-dev+ #237 [ 60.193387] Hardware name: Renesas Salvator-X 2nd version board based on r8a77951 (DT) [ 60.201302] pstate: 00000005 (nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 60.208263] pc : swiotlb_tbl_map_single+0x2c0/0x590 [ 60.213149] lr : swiotlb_map+0x88/0x1f0 [ 60.216982] sp : ffff80000a883bc0 [ 60.220292] x29: ffff80000a883bc0 x28: 0000000000000000 x27: 0000000000000000 [ 60.227430] x26: 0000000000000000 x25: ffff0004c0da20d0 x24: ffff80000a1f77c0 [ 60.234567] x23: 0000000000000002 x22: 0001000040000010 x21: 000000007a000000 [ 60.241703] x20: 0000000000200000 x19: 0000000000000000 x18: 0000000000000000 [ 60.248840] x17: 0000000000000000 x16: 0000000000000000 x15: ffff0006ff7b9180 [ 60.255977] x14: ffff0006ff7b9180 x13: 0000000000000000 x12: 0000000000000000 [ 60.263113] x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000 [ 60.270249] x8 : 0001000000000010 x7 : ffff0004c6754b20 x6 : 0000000000000000 [ 60.277385] x5 : ffff0004c0da2090 x4 : 0000000000000000 x3 : 0000000000000001 [ 60.284521] x2 : 0000000040000000 x1 : 0000000000000000 x0 : 0000000040000010 [ 60.291658] Call trace: [ 60.294100] swiotlb_tbl_map_single+0x2c0/0x590 [ 60.298629] swiotlb_map+0x88/0x1f0 [ 60.302115] dma_map_page_attrs+0x188/0x230 [ 60.306299] pci_endpoint_test_ioctl+0x5e4/0xd90 [pci_endpoint_test] [ 60.312660] __arm64_sys_ioctl+0xa8/0xf0 [ 60.316583] invoke_syscall+0x44/0x108 [ 60.320334] el0_svc_common.constprop.0+0xcc/0xf0 [ 60.325038] do_el0_svc+0x2c/0xb8 [ 60.328351] el0_svc+0x2c/0x88 [ 60.331406] el0t_64_sync_handler+0xb8/0xc0 [ 60.335587] el0t_64_sync+0x18c/0x190 [ 60.339251] Code: 52800013 d2e00414 35fff45c d503201f (d4210000) [ 60.345344] ---[ end trace 0000000000000000 ]--- To fix it, this patch adds a checking the payload length if it is zero. Fixes: 343dc693 ("misc: pci_endpoint_test: Prevent some integer overflows") Cc: stable <stable@kernel.org> Signed-off-by:
Shunsuke Mie <mie@igel.co.jp> Link: https://lore.kernel.org/r/20220907020100.122588-2-mie@igel.co.jpSigned-off-by:
-
Shunsuke Mie authored
Each transfer test functions have same parameter checking code. This patch unites those to an introduced function. Signed-off-by:
-
Fabio M. De Francesco authored
kmap() is being deprecated in favor of kmap_local_page(). There are two main problems with kmap(): (1) It comes with an overhead as the mapping space is restricted and protected by a global lock for synchronization and (2) it also requires global TLB invalidation when the kmap’s pool wraps and it might block when the mapping space is fully utilized until a slot becomes available. With kmap_local_page() the mappings are per thread, CPU local, can take page faults, and can be called from any context (including interrupts). It is faster than kmap() in kernels with HIGHMEM enabled. Furthermore, the tasks can be preempted and, when they are scheduled to run again, the kernel virtual addresses are restored and still valid. Since its use in xilinx_sdfec.c is safe, replace kmap()i / kunmap() with kmap_local_page() / kunmap_local(). Cc: "Venkataramanan, Anirudh" <anirudh.venkataramanan@intel.com> Suggested-by:
Ira Weiny <ira.weiny@intel.com> Signed-off-by:
Fabio M. De Francesco <fmdefrancesco@gmail.com> Link: https://lore.kernel.org/r/20220901154408.23984-3-fmdefrancesco@gmail.comSigned-off-by:
-
Fabio M. De Francesco authored
Pages in an array are mapped in a loop but, after the code is done with the virtual addresses, these pages are never unmapped. Therefore, call kunmap() to unmap pages[i]. Cc: "Venkataramanan, Anirudh" <anirudh.venkataramanan@intel.com> Cc: Ira Weiny <ira.weiny@intel.com> Signed-off-by:
-
Fabio M. De Francesco authored
kmap() is being deprecated in favor of kmap_local_page(). There are two main problems with kmap(): (1) It comes with an overhead as the mapping space is restricted and protected by a global lock for synchronization and (2) it also requires global TLB invalidation when the kmap’s pool wraps and it might block when the mapping space is fully utilized until a slot becomes available. With kmap_local_page() the mappings are per thread, CPU local, can take page faults, and can be called from any context (including interrupts). It is faster than kmap() in kernels with HIGHMEM enabled. Furthermore, the tasks can be preempted and, when they are scheduled to run again, the kernel virtual addresses are restored and still valid. Since its use in vmci_queue_pair.c is safe everywhere, replace kmap() with kmap_local_page(). Cc: "Venkataramanan, Anirudh" <anirudh.venkataramanan@intel.com> Suggested-by:
-
Jiasheng Jiang authored
When drivers are working properly, they are quiet. Therefore, the vbg_info() should be removed. Suggested-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Jiasheng Jiang <jiasheng@iscas.ac.cn> Link: https://lore.kernel.org/r/20220901144619.3550352-1-jiasheng@iscas.ac.cnSigned-off-by:
-
Jiasheng Jiang authored
The driver core supports the ability to handle the creation and removal of device-specific sysfs files in a race-free manner. Moreover, it can guarantee the success of creation. Therefore, it should be better to convert to use dev_groups. Fixes: 0ba002bc ("virt: Add vboxguest driver for Virtual Box Guest integration") Reviewed-by:
-
Wei Yongjun authored
Use the module_auxiliary_driver() macro to make the code simpler by eliminating module_init and module_exit calls. Fixes: 7d3e4d80 ("misc: microchip: pci1xxxx: load gpio driver for the gpio controller auxiliary device enumerated by the auxiliary bus driver.") Reviewed-by:
Kumaravel Thiagarajan <kumaravel.thiagarajan@microchip.com> Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Link: https://lore.kernel.org/r/20220907145808.1789249-5-weiyongjun@huaweicloud.comSigned-off-by:
-
Wei Yongjun authored
This patch adds missing MODULE_DEVICE_TABLE definition which generates correct modalias for automatic loading of this driver when it is built as an external module. Fixes: 7d3e4d80 ("misc: microchip: pci1xxxx: load gpio driver for the gpio controller auxiliary device enumerated by the auxiliary bus driver.") Reviewed-by:
-
Wei Yongjun authored
The sparse tool complains as follows: drivers/misc/mchp_pci1xxxx/mchp_pci1xxxx_gpio.c:409:34: warning: symbol 'pci1xxxx_gpio_auxiliary_id_table' was not declared. Should it be static? This symbol is not used outside of mchp_pci1xxxx_gpio.c, so marks it static. Fixes: 7d3e4d80 ("misc: microchip: pci1xxxx: load gpio driver for the gpio controller auxiliary device enumerated by the auxiliary bus driver.") Reported-by:
-
Wei Yongjun authored
The driver allocates the spinlock but not initialize it. Use spin_lock_init() on it to initialize it correctly. Fixes: 7d3e4d80 ("misc: microchip: pci1xxxx: load gpio driver for the gpio controller auxiliary device enumerated by the auxiliary bus driver.") Reviewed-by:
-
Wei Yongjun authored
In some error handling path, resoures alloced may not released. This patch fix them. Fixes: 393fc2f5 ("misc: microchip: pci1xxxx: load auxiliary bus driver for the PIO function in the multi-function endpoint of pci1xxxx device.") Reviewed-by:
-
- 07 Sep, 2022 1 commit
-
-
Vishnu Dasa authored
Add a new entry for VMWARE VSOCK VMCI TRANSPORT DRIVER in the MAINTAINERS file. Acked-by:
Stefano Garzarella <sgarzare@redhat.com> Signed-off-by:
Vishnu Dasa <vdasa@vmware.com> Link: https://lore.kernel.org/r/20220906172722.19862-4-vdasa@vmware.comSigned-off-by:
-
