- 07 Apr, 2009 13 commits
-
-
Wolfram Sang authored
'disable_delay' was static which is wrong as it is calculated using the per-device bus speed. This patch turns 'disable_delay' into a per-device variable. Reported-by:
Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by:
Wolfram Sang <w.sang@pengutronix.de> Acked-by:
Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by:
Darius Augulis <augulis.darius@gmail.com> Signed-off-by:
Ben Dooks <ben-linux@fluff.org>
-
Oskar Schirmer authored
Support for the s6000 on-chip i2c controller. Signed-off-by:
Oskar Schirmer <os@emlix.com> Signed-off-by:
Daniel Glöckner <dg@emlix.com> Signed-off-by:
-
Wolfgang Grandegger authored
Preserve I2C clock settings for the Socrates MPC8544 board. Signed-off-by:
Wolfgang Grandegger <wg@grandegger.com> Signed-off-by:
-
Wolfgang Grandegger authored
This patch makes the I2C bus speed configurable by using the I2C node property "clock-frequency". If the property is not defined, the old fixed clock settings will be used for backward comptibility. The generic I2C clock properties, especially the CPU-specific source clock pre-scaler are defined via the OF match table: static const struct of_device_id mpc_i2c_of_match[] = { ... {.compatible = "fsl,mpc8543-i2c", .data = &(struct fsl_i2c_match_data) { .setclock = mpc_i2c_setclock_8xxx, .prescaler = 2, }, }, The "data" field defines the relevant I2C setclock function and the relevant pre-scaler for the I2C source clock frequency. It uses arch-specific tables and functions to determine resonable Freqency Divider Register (fdr) values for MPC83xx, MPC85xx, MPC86xx, MPC5200 and MPC5200B. The i2c->flags field and the corresponding FSL_I2C_DEV_* definitions have been removed as they are obsolete. Signed-off-by: -
Wolfgang Grandegger authored
This patch used the dev_dbg, dev_err, etc. functions for debug and error output instead of printk and pr_debug. Signed-off-by:
-
Wolfgang Grandegger authored
Fix errors reported by checkpatch (indention, long lines, trailing white space, etc.). Signed-off-by:
-
Darius Augulis authored
Signed-off-by:
-
Mark Brown authored
This is required in order to ensure that core system devices such as voltage regulators attached via I2C are avaiable early in boot. Signed-off-by:
Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by:
-
Daniel Silverstone authored
The platform data for the i2c-s3c2410 driver used to allow a min, max and desired frequency for the I2C bus. This patch reduces it to simply a desired frequency ceiling and corrects all the uses of the platform data appropriately. This means, for example, that on a system with a 66MHz fclk, a request for 100KHz will achieve 65KHz which is safe and acceptable, rather than 378KHz which it would have achieved without this change. Signed-off-by:
Simtec Linux Team <linux@simtec.co.uk> Signed-off-by:
Daniel Silverstone <dsilvers@simtec.co.uk> [ben-linux@fluff.org: tidy subject and description] Signed-off-by:
-
Ben Dooks authored
The sda_delay field should be specified in ns, not in clock ticks as when using cpufreq we could be changing the bus rate. Signed-off-by:Ben Dooks <ben@simtec.co.uk>
-
Darius Augulis authored
Implementation of I2C Adapter/Algorithm Driver for I2C Bus integrated in Freescale's i.MX/MXC processors. Signed-off-by:
-
Trond Myklebust authored
Due to an apparent typo, commit a67d18f8 (NFS: load the rpc/rdma transport module automatically) lead to the 'proto=' mount option doing a double free, while Opt_mountproto leaks a string. Signed-off-by:
Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
This makes the defautl ext3 data ordering mode (when no explicit ordering is set) configurable, so as to allow people to default to 'data=writeback' and get the resulting latency improvements. This is a non-issue if a filesystem has been explicitly set to some ordering (with 'tune2fs'). Signed-off-by:
-
- 06 Apr, 2009 27 commits
-
-
git://git.infradead.org/ubifs-2.6Linus Torvalds authored
* 'linux-next' of git://git.infradead.org/ubifs-2.6: UBIFS: fix recovery bug UBIFS: add R/O compatibility UBIFS: fix compiler warnings UBIFS: fully sort GCed nodes UBIFS: fix commentaries UBIFS: introduce a helpful variable UBIFS: use KERN_CONT UBIFS: fix lprops committing bug UBIFS: fix bogus assertion UBIFS: fix bug where page is marked uptodate when out of space UBIFS: amend key_hash return value UBIFS: improve find function interface UBIFS: list usage cleanup UBIFS: fix dbg_chk_lpt_sz()
-
git://git.infradead.org/ubi-2.6Linus Torvalds authored
* 'linux-next' of git://git.infradead.org/ubi-2.6: UBI: add fsync capability
-
Oleg Nesterov authored
The CAP_KILL check in exit_notify() looks just wrong, kill it. Whatever logic we have to reset ->exit_signal, the malicious user can bypass it if it execs the setuid application before exiting. Signed-off-by:
Oleg Nesterov <oleg@redhat.com> Acked-by:
Serge Hallyn <serue@us.ibm.com> Acked-by:
Roland McGrath <roland@redhat.com> Signed-off-by:
-
git://git.infradead.org/mtd-2.6Linus Torvalds authored
* git://git.infradead.org/mtd-2.6: (53 commits) [MTD] struct device - replace bus_id with dev_name(), dev_set_name() [MTD] [NOR] Fixup for Numonyx M29W128 chips [MTD] mtdpart: Make ecc_stats more realistic. powerpc/85xx: TQM8548: Update DTS file for multi-chip support powerpc: NAND: FSL UPM: document new bindings [MTD] [NAND] FSL-UPM: Add wait flags to support board/chip specific delays [MTD] [NAND] FSL-UPM: add multi chip support [MTD] [NOR] Add device parent info to physmap_of [MTD] [NAND] Add support for NAND on the Socrates board [MTD] [NAND] Add support for 4KiB pages. [MTD] sysfs support should not depend on CONFIG_PROC_FS [MTD] [NAND] Add parent info for CAFÉ controller [MTD] support driver model updates [MTD] driver model updates (part 2) [MTD] driver model updates [MTD] [NAND] move gen_nand's probe function to .devinit.text [MTD] [MAPS] move sa1100 flash's probe function to .devinit.text [MTD] fix use after free in register_mtd_blktrans [MTD] [MAPS] Drop now unused sharpsl-flash map [MTD] ofpart: Check name property to determine partition nodes. ... Manually fix trivial conflict in drivers/mtd/maps/Makefile
-
Alan Cox authored
As noted by Janne Grunau it would be good if the date was also right. (Web site also resynched) Signed-off-by:
Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by:
-
Alexander Beregalov authored
Fix this build error: drivers/md/raid1.c: In function 'raid1_congested': drivers/md/raid1.c:589: error: 'BDI_write_congested' undeclared BDI_write_congested was changed in commit 1faa16d2 ("block: change the request allocation/congestion logic to be sync/async based") Signed-off-by:
Alexander Beregalov <a.beregalov@gmail.com> Cc: Neil Brown <neilb@suse.de> Cc: Jens Axboe <jens.axboe@oracle.com> Signed-off-by:
-
Alan Cox authored
The 8430 patch was short a const so caused a warning. Signed-off-by:
-
Roel Kluin authored
Signed-off-by:
Roel Kluin <roel.kluin@gmail.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Alan Cox authored
There are various bits of code here that are unfinished and instead of being harmless either confuse or spew stuff into the logs at higher than debug level. They can and should go away. Also remove the bogus use of tty->lowlatency. We fixed the need for this hack long ago (with the flip buffer rewrite) but people keep copying it into drivers. Signed-off-by:
-
Alan Cox authored
Closes bug 9065 Signed-off-by:
-
Alan Cox authored
Bugzilla #9095 and a couple of other confirmations Signed-off-by:
-
Breno Leitao authored
Signed-off-by:
Breno Leitao <leitao@linux.vnet.ibm.com> Signed-off-by:
-
Alexander Beregalov authored
Fixes: In file included from drivers/serial/mux.c:37: include/linux/serial_core.h: In function 'uart_handle_sysrq_char': include/linux/serial_core.h:467: error: 'struct uart_port' has no member named 'sysrq' include/linux/serial_core.h:468: error: 'struct uart_port' has no member named 'sysrq' Signed-off-by:
-
Breno Leitao authored
As it was, the retval was never returned, so its assignments were silly. Just consolidate everything to rc, and remove the unused retval variable. Signed-off-by:
Alan Cox <alan@etchedpixels.co.uk> Signed-off-by:
-
Breno Leitao authored
Signed-off-by:
-
Jiri Slaby authored
mxser_check_modem_status is called with tty parameter, so the reference should be increased by callers already -- for ioctl syscall it is held whole time gap since open to close, for interrupt, the reference count is increased in the irq handler. There is no tty_kref_put in that function, so this also fixes a refcounting bug. Signed-off-by:
Jiri Slaby <jirislaby@gmail.com> Signed-off-by:
-
Jiri Slaby authored
There is missing tty_kref_put on some paths in moxa_poll_port, although the reference is always taken. Fix it. Signed-off-by:
Jan 'Yenya' Kasprzak <kas@fi.muni.cz> Signed-off-by:
-
Alan Cox authored
The isicom driver leaks a kref on the shutdown path. Drop the additional kref we took Signed-off-by:
-
Alan Cox authored
Found by Daniel Marjamäki using cppcheck Signed-off-by:
-
Scott James Remnant authored
The riscom8 module is missing the char-major-48-* alias that would cause it to be auto-loaded when a device of that type is opened. This patch adds the alias. Signed-off-by:
Scott James Remnant <scott@canonical.com> Signed-off-by:
Tim Gardner <tim.gardner@canonical.com> Signed-off-by:
-
Scott James Remnant authored
The cdc_acm module is missing the char-major-166-* alias that would cause it to be auto-loaded when a device of that type is opened. This patch adds the alias. Signed-off-by:
-
Scott James Remnant authored
The specialix module is missing the char-major-75-* alias that would cause it to be auto-loaded when a device of that type is opened. This patch adds the alias. Signed-off-by:
-
Scott James Remnant authored
The cyclades module is missing the char-major-19-* alias that would cause it to be auto-loaded when a device of that type is opened. This patch adds the alias. Signed-off-by:
-
Scott James Remnant authored
The applicom module is missing the char-major-10-157 alias that would cause it to be auto-loaded when a device of that type is opened. This patch adds the alias. Signed-off-by:
-
Graf Yang authored
Fix bug - up arrow key works abnormal for bf561 ezkit board Signed-off-by:
Graf Yang <graf.yang@analog.com> Signed-off-by:
Bryan Wu <cooloney@kernel.org> Signed-off-by:
-
Sonic Zhang authored
Reported-by:
Qian Zhang <zhangq@sansitech.com> Signed-off-by:
Sonic Zhang <sonic.zhang@analog.com> Signed-off-by:
-
Sonic Zhang authored
Fixes this compile issue: drivers/serial/bfin_5xx.c: In function bfin_serial_rx_chars: drivers/serial/bfin_5xx.c:178: error: struct uart_info has no member named tty Signed-off-by:
-
