- 21 Aug, 2016 34 commits
-
-
Andrew Goodbody authored
commit f3eec0cf upstream. shared_fifo endpoints would only get a previous tx state cleared out, the rx state was only cleared for non shared_fifo endpoints Change this so that the rx state is cleared for all endpoints. This addresses an issue that resulted in rx packets being dropped silently. Signed-off-by:
Andrew Goodbody <andrew.goodbody@cambrionix.com> Cc: stable@vger.kernel.org Signed-off-by:
Bin Liu <b-liu@ti.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Willy Tarreau <w@1wt.eu>
-
Andrew Goodbody authored
commit 7b2c17f8 upstream. Ensure that the endpoint is stopped by clearing REQPKT before clearing DATAERR_NAKTIMEOUT before rotating the queue on the dedicated bulk endpoint. This addresses an issue where a race could result in the endpoint receiving data before it was reprogrammed resulting in a warning about such data from musb_rx_reinit before it was thrown away. The data thrown away was a valid packet that had been correctly ACKed which meant the host and device got out of sync. Signed-off-by:
-
Daniele Palmas authored
commit 3c0415fa upstream. This patch adds support for 0x1206 PID of Telit LE910. Since the interfaces positions are the same than the ones for 0x1043 PID of Telit LE922, telit_le922_blacklist_usbcfg3 is used. Signed-off-by:
Daniele Palmas <dnlplm@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Alan Stern authored
commit 7e8b3dfe upstream. The HOSTPC extension registers found in some EHCI implementations form a variable-length array, with one element for each port. Therefore the hostpc field in struct ehci_regs should be declared as a zero-length array, not a single-element array. This fixes a problem reported by UBSAN. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Reported-by:
Wilfried Klaebe <linux-kernel@lebenslange-mailadresse.de> Tested-by:
-
Willy Tarreau authored
Ben Hutchings reported that two patches were incorrectly backported to 3.10 : - ddbe1fca ("USB: Add device quirk for ASUS T100 Base Station keyboard") - ad87e032 ("USB: add quirk for devices with broken LPM") These two patches introduce quirks which must be in usb_quirk_list and not in usb_interface_quirk_list. These last one must only contain the Logitech UVC camera. Reported-by:
Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
-
Kangjie Lu authored
commit 681fef83 upstream. The stack object "ci" has a total size of 8 bytes. Its last 3 bytes are padding bytes which are not initialized and leaked to userland via "copy_to_user". CVE-2016-4482 Signed-off-by:
Kangjie Lu <kjlu@gatech.edu> Signed-off-by:
Charles (Chas) Williams <ciwillia@brocade.com> Signed-off-by:
-
Alan Stern authored
commit e50293ef upstream. Commit 8520f380 ("USB: change hub initialization sleeps to delayed_work") changed the hub_activate() routine to make part of it run in a workqueue. However, the commit failed to take a reference to the usb_hub structure or to lock the hub interface while doing so. As a result, if a hub is plugged in and quickly unplugged before the work routine can run, the routine will try to access memory that has been deallocated. Or, if the hub is unplugged while the routine is running, the memory may be deallocated while it is in active use. This patch fixes the problem by taking a reference to the usb_hub at the start of hub_activate() and releasing it at the end (when the work is finished), and by locking the hub interface while the work routine is running. It also adds a check at the start of the routine to see if the hub has already been disconnected, in which nothing should be done. CVE-2015-8816 Signed-off-by:
Alexandru Cornea <alexandru.cornea@intel.com> Tested-by:
Luis Henriques <luis.henriques@canonical.com> Signed-off-by:
-
Eric Dumazet authored
commit 197c949e upstream. Backport of this upstream commit into stable kernels : 89c22d8c ("net: Fix skb csum races when peeking") exposed a bug in udp stack vs MSG_PEEK support, when user provides a buffer smaller than skb payload. In this case, skb_copy_and_csum_datagram_iovec(skb, sizeof(struct udphdr), msg->msg_iov); returns -EFAULT. This bug does not happen in upstream kernels since Al Viro did a great job to replace this into : skb_copy_and_csum_datagram_msg(skb, sizeof(struct udphdr), msg); This variant is safe vs short buffers. For the time being, instead reverting Herbert Xu patch and add back skb->ip_summed invalid changes, simply store the result of udp_lib_checksum_complete() so that we avoid computing the checksum a second time, and avoid the problematic skb_copy_and_csum_datagram_iovec() call. This patch can be applied on recent kernels as it avoids a double checksumming, then backported to stable kernels as a bug fix. Signed-off-by:
Eric Dumazet <edumazet@google.com> Acked-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
David S. Miller <davem@davemloft.net> [ luis: backported to 3.16: adjusted context ] Signed-off-by:
-
Neil Horman authored
commit 3dc48af3 upstream. This fixes the problem of acpiphp claiming slots that should be managed by pciehp, which may keep ExpressCard slots from working. The acpiphp driver claims PCIe slots unless the BIOS has granted us control of PCIe native hotplug via _OSC. Prior to v3.10, the acpiphp .add method (add_bridge()) was always called *after* we had requested native hotplug control with _OSC. But after 3b63aaa7 ("PCI: acpiphp: Do not use ACPI PCI subdriver mechanism"), which appeared in v3.10, acpiphp initialization is done during the bus scan via the pcibios_add_bus() hook, and this happens *before* we request native hotplug control. Therefore, acpiphp doesn't know yet whether the BIOS will grant control, and it claims slots that we should be handling with native hotplug. This patch requests native hotplug control earlier, so we know whether the BIOS granted it to us before we initialize acpiphp. To avoid reintroducing the ASPM issue fixed by b8178f13 ('Revert "PCI/ACPI: Request _OSC control before scanning PCI root bus"'), we run _OSC earlier but defer the actual ASPM calls until after the bus scan is complete. Tested successfully by myself. [bhelgaas: changelog, mark for stable] Reference: https://bugzilla.kernel.org/show_bug.cgi?id=60736Signed-off-by:
Neil Horman <nhorman@tuxdriver.com> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Acked-by:
Yinghai Lu <yinghai@kernel.org> CC: stable@vger.kernel.org # v3.10+ CC: Len Brown <lenb@kernel.org> CC: "Rafael J. Wysocki" <rjw@sisk.pl> [ciwillia@brocade.com: backported to 3.10: adjusted context] Signed-off-by:
-
Vladimir Davydov authored
commit 69828dce upstream. Sending SI_TKILL from rt_[tg]sigqueueinfo was deprecated, so now we issue a warning on the first attempt of doing it. We use WARN_ON_ONCE, which is not informative and, what is worse, taints the kernel, making the trinity syscall fuzzer complain false-positively from time to time. It does not look like we need this warning at all, because the behaviour changed quite a long time ago (2.6.39), and if an application relies on the old API, it gets EPERM anyway and can issue a warning by itself. So let us zap the warning in kernel. Signed-off-by:
Vladimir Davydov <vdavydov@parallels.com> Acked-by:
Oleg Nesterov <oleg@redhat.com> Cc: Richard Weinberger <richard@nod.at> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Cc: Vinson Lee <vlee@freedesktop.org> Signed-off-by:
-
Andrey Ryabinin authored
commit 6d6f2833 upstream. Jim reported: UBSAN: Undefined behaviour in arch/x86/events/intel/core.c:3708:12 shift exponent 35 is too large for 32-bit type 'long unsigned int' The use of 'unsigned long' type obviously is not correct here, make it 'unsigned long long' instead. Reported-by:
Jim Cromie <jim.cromie@gmail.com> Signed-off-by:
Andrey Ryabinin <aryabinin@virtuozzo.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: <stable@vger.kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Imre Palik <imrep@amazon.de> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Fixes: 2c33645d ("perf/x86: Honor the architectural performance monitoring version") Link: http://lkml.kernel.org/r/1462974711-10037-1-git-send-email-aryabinin@virtuozzo.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Cc: Kevin Christopher <kevinc@vmware.com> Signed-off-by:
-
Palik, Imre authored
commit 2c33645d upstream. Architectural performance monitoring, version 1, doesn't support fixed counters. Currently, even if a hypervisor advertises support for architectural performance monitoring version 1, perf may still try to use the fixed counters, as the constraints are set up based on the CPU model. This patch ensures that perf honors the architectural performance monitoring version returned by CPUID, and it only uses the fixed counters for version 2 and above. (Some of the ideas in this patch came from Peter Zijlstra.) Signed-off-by:
Imre Palik <imrep@amazon.de> Signed-off-by:
-
Florian Westphal authored
commit 63ecb81a upstream. commit d7591f0c upstream The three variants use same copy&pasted code, condense this into a helper and use that. Make sure info.name is 0-terminated. Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Bernhard Thaler authored
commit d26e2c9f upstream. This partially reverts commit 1086bbe9 ("netfilter: ensure number of counters is >0 in do_replace()") in net/bridge/netfilter/ebtables.c. Setting rules with ebtables does not work any more with 1086bbe9 place. There is an error message and no rules set in the end. e.g. ~# ebtables -t nat -A POSTROUTING --src 12:34:56:78:9a:bc -j DROP Unable to update the kernel. Two possible causes: 1. Multiple ebtables programs were executing simultaneously. The ebtables userspace tool doesn't by default support multiple ebtables programs running Reverting the ebtables part of 1086bbe9 makes this work again. Signed-off-by:
Bernhard Thaler <bernhard.thaler@wvnet.at> Signed-off-by:
-
Florian Westphal authored
commit 09d96860 upstream. This looks like refactoring, but its also a bug fix. Problem is that the compat path (32bit iptables, 64bit kernel) lacks a few sanity tests that are done in the normal path. For example, we do not check for underflows and the base chain policies. While its possible to also add such checks to the compat path, its more copy&pastry, for instance we cannot reuse check_underflow() helper as e->target_offset differs in the compat case. Other problem is that it makes auditing for validation errors harder; two places need to be checked and kept in sync. At a high level 32 bit compat works like this: 1- initial pass over blob: validate match/entry offsets, bounds checking lookup all matches and targets do bookkeeping wrt. size delta of 32/64bit structures assign match/target.u.kernel pointer (points at kernel implementation, needed to access ->compatsize etc.) 2- allocate memory according to the total bookkeeping size to contain the translated ruleset 3- second pass over original blob: for each entry, copy the 32bit representation to the newly allocated memory. This also does any special match translations (e.g. adjust 32bit to 64bit longs, etc). 4- check if ruleset is free of loops (chase all jumps) 5-first pass over translated blob: call the checkentry function of all matches and targets. The alternative implemented by this patch is to drop steps 3&4 from the compat process, the translation is changed into an intermediate step rather than a full 1:1 translate_table replacement. In the 2nd pass (step #3), change the 64bit ruleset back to a kernel representation, i.e. put() the kernel pointer and restore ->u.user.name . This gets us a 64bit ruleset that is in the format generated by a 64bit iptables userspace -- we can then use translate_table() to get the 'native' sanity checks. This has two drawbacks: 1. we re-validate all the match and target entry structure sizes even though compat translation is supposed to never generate bogus offsets. 2. we put and then re-lookup each match and target. THe upside is that we get all sanity tests and ruleset validations provided by the normal path and can remove some duplicated compat code. iptables-restore time of autogenerated ruleset with 300k chains of form -A CHAIN0001 -m limit --limit 1/s -j CHAIN0002 -A CHAIN0002 -m limit --limit 1/s -j CHAIN0003 shows no noticeable differences in restore times: old: 0m30.796s new: 0m31.521s 64bit: 0m25.674s Signed-off-by:
-
Dave Jones authored
commit 1086bbe9 upstream. After improving setsockopt() coverage in trinity, I started triggering vmalloc failures pretty reliably from this code path: warn_alloc_failed+0xe9/0x140 __vmalloc_node_range+0x1be/0x270 vzalloc+0x4b/0x50 __do_replace+0x52/0x260 [ip_tables] do_ipt_set_ctl+0x15d/0x1d0 [ip_tables] nf_setsockopt+0x65/0x90 ip_setsockopt+0x61/0xa0 raw_setsockopt+0x16/0x60 sock_common_setsockopt+0x14/0x20 SyS_setsockopt+0x71/0xd0 It turns out we don't validate that the num_counters field in the struct we pass in from userspace is initialized. The same problem also exists in ebtables, arptables, ipv6, and the compat variants. Signed-off-by:
Dave Jones <davej@codemonkey.org.uk> Signed-off-by:
-
Florian Westphal authored
commit 0188346f upstream. Always returned 0. Signed-off-by:
-
Florian Westphal authored
commit 329a0807 upstream. Signed-off-by:
-
Florian Westphal authored
commit 7d3f843e upstream. Signed-off-by:
-
Florian Westphal authored
commit 8dddd327 upstream. Signed-off-by:
-
Florian Westphal authored
commit 7b7eba0f upstream. Quoting John Stultz: In updating a 32bit arm device from 4.6 to Linus' current HEAD, I noticed I was having some trouble with networking, and realized that /proc/net/ip_tables_names was suddenly empty. Digging through the registration process, it seems we're catching on the: if (strcmp(t->u.user.name, XT_STANDARD_TARGET) == 0 && target_offset + sizeof(struct xt_standard_target) != next_offset) return -EINVAL; Where next_offset seems to be 4 bytes larger then the offset + standard_target struct size. next_offset needs to be aligned via XT_ALIGN (so we can access all members of ip(6)t_entry struct). This problem didn't show up on i686 as it only needs 4-byte alignment for u64, but iptables userspace on other 32bit arches does insert extra padding. Reported-by:
John Stultz <john.stultz@linaro.org> Tested-by:
-
Florian Westphal authored
commit 13631bfc upstream. Validate that all matches (if any) add up to the beginning of the target and that each match covers at least the base structure size. The compat path should be able to safely re-use the function as the structures only differ in alignment; added a BUILD_BUG_ON just in case we have an arch that adds padding as well. Signed-off-by:
-
Florian Westphal authored
commit ce683e5f upstream. We're currently asserting that targetoff + targetsize <= nextoff. Extend it to also check that targetoff is >= sizeof(xt_entry). Since this is generic code, add an argument pointing to the start of the match/target, we can then derive the base structure size from the delta. We also need the e->elems pointer in a followup change to validate matches. Signed-off-by:
-
Florian Westphal authored
commit 7ed2abdd upstream. We have targets and standard targets -- the latter carries a verdict. The ip/ip6tables validation functions will access t->verdict for the standard targets to fetch the jump offset or verdict for chainloop detection, but this happens before the targets get checked/validated. Thus we also need to check for verdict presence here, else t->verdict can point right after a blob. Spotted with UBSAN while testing malformed blobs. Signed-off-by:
-
Florian Westphal authored
commit fc1221b3 upstream. 32bit rulesets have different layout and alignment requirements, so once more integrity checks get added to xt_check_entry_offsets it will reject well-formed 32bit rulesets. Signed-off-by:
-
Florian Westphal authored
commit a08e4e19 upstream. The target size includes the size of the xt_entry_target struct. Signed-off-by:
-
Florian Westphal authored
commit aa412ba2 upstream. Once we add more sanity testing to xt_check_entry_offsets it becomes relvant if we're expecting a 32bit 'config_compat' blob or a normal one. Since we already have a lot of similar-named functions (check_entry, compat_check_entry, find_and_check_entry, etc.) and the current incarnation is short just fold its contents into the callers. Signed-off-by:
-
Florian Westphal authored
commit 7d35812c upstream. Currently arp/ip and ip6tables each implement a short helper to check that the target offset is large enough to hold one xt_entry_target struct and that t->u.target_size fits within the current rule. Unfortunately these checks are not sufficient. To avoid adding new tests to all of ip/ip6/arptables move the current checks into a helper, then extend this helper in followup patches. Signed-off-by:
-
Florian Westphal authored
commit f24e230d upstream. Ben Hawkes says: In the mark_source_chains function (net/ipv4/netfilter/ip_tables.c) it is possible for a user-supplied ipt_entry structure to have a large next_offset field. This field is not bounds checked prior to writing a counter value at the supplied offset. Base chains enforce absolute verdict. User defined chains are supposed to end with an unconditional return, xtables userspace adds them automatically. But if such return is missing we will move to non-existent next rule. CVE-2016-3134 Reported-by:
Ben Hawkes <hawkes@google.com> Signed-off-by:
Chas Williams <3chas3@gmail.com> Signed-off-by:
-
Florian Westphal authored
commit 54d83fc7 upstream. Ben Hawkes says: In the mark_source_chains function (net/ipv4/netfilter/ip_tables.c) it is possible for a user-supplied ipt_entry structure to have a large next_offset field. This field is not bounds checked prior to writing a counter value at the supplied offset. Problem is that mark_source_chains should not have been called -- the rule doesn't have a next entry, so its supposed to return an absolute verdict of either ACCEPT or DROP. However, the function conditional() doesn't work as the name implies. It only checks that the rule is using wildcard address matching. However, an unconditional rule must also not be using any matches (no -m args). The underflow validator only checked the addresses, therefore passing the 'unconditional absolute verdict' test, while mark_source_chains also tested for presence of matches, and thus proceeeded to the next (not-existent) rule. Unify this so that all the callers have same idea of 'unconditional rule'. Reported-by:
-
Florian Westphal authored
commit 6e94e0cf upstream. Otherwise this function may read data beyond the ruleset blob. Signed-off-by:
-
Florian Westphal authored
commit bdf533de upstream. We should check that e->target_offset is sane before mark_source_chains gets called since it will fetch the target entry for loop detection. Signed-off-by:
-
Andi Kleen authored
commit 54c2f3fd upstream. Signed-off-by:
Andi Kleen <ak@linux.intel.com> Link: http://lkml.kernel.org/r/1375740170-7446-12-git-send-email-andi@firstfloor.orgSigned-off-by:
H. Peter Anvin <hpa@linux.intel.com> Signed-off-by:
-
Antonio Alecrim Jr authored
commit eb8948a0 upstream. Signed-off-by:
Antonio Alecrim Jr <antonio.alecrim@gmail.com> Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
-
- 12 Jun, 2016 1 commit
-
-
Willy Tarreau authored
-
- 07 Jun, 2016 5 commits
-
-
Chanwoo Choi authored
commit b8995f52 upstream. This patch fixes the broken serial log when changing the clock source of uart device. Before disabling the original clock source, this patch enables the new clock source to protect the clock off state for a split second. Signed-off-by:
Chanwoo Choi <cw00.choi@samsung.com> Reviewed-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
-
Jiri Slaby authored
commit 6798df4c upstream. When csw->con_startup() fails in do_register_con_driver, we return no error (i.e. 0). This was changed back in 2006 by commit 3e795de7. Before that we used to return -ENODEV. So fix the return value to be -ENODEV in that case again. Fixes: 3e795de7 ("VT binding: Add binding/unbinding support for the VT console") Signed-off-by:
Jiri Slaby <jslaby@suse.cz> Reported-by:
"Dan Carpenter" <dan.carpenter@oracle.com> Signed-off-by:
-
Schemmel Hans-Christoph authored
commit 444f94e9 upstream. Added support for Gemalto's Cinterion PH8 and AHxx products with 2 RmNet Interfaces and products with 1 RmNet + 1 USB Audio interface. In addition some minor renaming and formatting. Signed-off-by:
Hans-Christoph Schemmel <hans-christoph.schemmel@gemalto.com> [johan: sort current entries and trim trailing whitespace ] Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Johan Hovold authored
commit c8d62957 upstream. URBs and buffers allocated in attach for Epic devices would never be deallocated in case of a later probe error (e.g. failure to allocate minor numbers) as disconnect is then never called. Fix by moving deallocation to release and making sure that the URBs are first unlinked. Fixes: f9c99bb8 ("USB: usb-serial: replace shutdown with disconnect, release") Cc: stable <stable@vger.kernel.org> # v2.6.31 Signed-off-by:
-
Johan Hovold authored
commit 028c49f5 upstream. The interface read URB is submitted in attach, but was only unlinked by the driver at disconnect. In case of a late probe error (e.g. due to failed minor allocation), disconnect is never called and we would end up with active URBs for an unbound interface. This in turn could lead to deallocated memory being dereferenced in the completion callback. Fixes: f7a33e60 ("USB: serial: add quatech2 usb to serial driver") Signed-off-by:
-
