If a socket has FANOUT sockopt set, a new proto_hook is registered
as part of fanout_add(). When processing a NETDEV_UNREGISTER event in
af_packet, __fanout_unlink is called for all sockets, but prot_hook which was
registered as part of fanout_add is not removed. Call fanout_release, on a
NETDEV_UNREGISTER, which removes prot_hook and removes fanout from the
fanout_list.

This fixes BUG_ON(!list_empty(&dev->ptype_specific)) in netdev_run_todo()
Signed-off-by: Anoob Soman <anoob.soman@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The KSZ9031 skew registers contain an offset, the chip's default value
is "neutral" which does not add any skew. Programming a 0 into a skew
property will actually set it the maximal negative adjustment and not
to a neutral position as one would expect.

Explain this situation in the devicetree binding documentation and list
the settings that the chip considers neutral.

Changing the implementation to accept negative values would have been
a better solution, but would break existing configurations.
Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Wake-on-LAN (WoL) is an Ethernet networking standard that allows
a computer/device to be turned on or awakened by a network message.

VSC8531 PHY can support this feature configure by driver set function.
WoL status get by driver get function.

Tested on Beaglebone Black with VSC 8531 PHY.
Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microsemi.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add a new compatible string for the R8A7796 (M3-W) RAVB.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add support to enable CPSW RGMII internal delay (id mode) bits
when rgmii internal delay is configured in phy.
Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Trival fix, dev_err messages are missing a \n, so add it. Also
fix grammer, spelling mistake and add white spaces to various
error messages.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Trival fix, dev_dbg message is missing a \n, so add it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Trival fix, dev_err messages are missing a \n, so add it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Paul Durrant says:

====================
xen-netback: guest rx side refactor

This series refactors the guest rx side of xen-netback:

- The code is moved into its own source module.

- The prefix variant of GSO handling is retired (since it is no longer
  in common use, and alternatives exist).

- The code is then simplified and modifications made to improve
  performance.

v2:
- Rebased onto refreshed net-next
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

This allows full 64K skbuffs (with 1500 mtu ethernet, composed of 45
fragments) to be handled by netback for to-guest rx.
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
[re-based]
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Reviewed-by: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Instead of flushing the copy ops when an packet is complete, complete
packets when their copy ops are done.  This improves performance by
reducing the number of grant copy hypercalls.

Latency is still limited by the relatively small size of the copy
batch.
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
[re-based]
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Instead of only placing one skb on the guest rx ring at a time, process
a batch of up-to 64.  This improves performance by ~10% in some tests.
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
[re-based]
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When an skb is removed from the guest rx queue, immediately wake the
tx queue, instead of after processing them.
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
[re-based]
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Refactor the to-guest (rx) path to:

1. Push responses for completed skbs earlier, reducing latency.

2. Reduce the per-queue memory overhead by greatly reducing the
   maximum number of grant copy ops in each hypercall (from 4352 to
   64).  Each struct xenvif_queue is now only 44 kB instead of 220 kB.

3. Make the code more maintainable.
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
[re-based]
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

As far as I am aware only very old Windows network frontends make use of
this style of passing GSO packets from backend to frontend. These
frontends can easily be replaced by the freely available Xen Project
Windows PV network frontend, which uses the 'default' mechanism for
passing GSO packets, which is also used by all Linux frontends.

NOTE: Removal of this feature will not cause breakage in old Windows
      frontends. They simply will no longer receive GSO packets - the
      packets instead being fragmented in the backend.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Reviewed-by: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The netback source module has become very large and somewhat confusing.
This patch simply moves all code related to the backend to frontend (i.e
guest side rx) data-path into a separate rx source module.

This patch contains no functional change, it is code movement and
minimal changes to avoid patch style-check issues.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Madalin Bucur says:

====================
fsl/fman: cleanup and small fixes

This series contains fixes for the DPAA FMan driver.
Adding myself as maintainer of the driver.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull f2fs updates from Jaegeuk Kim:
 "In this round, we've investigated how f2fs deals with errors given by
  our fault injection facility. With this, we could fix several corner
  cases. And, in order to improve the performance, we set inline_dentry
  by default and enhance the exisiting discard issue flow. In addition,
  we added f2fs_migrate_page for better memory management.

  Enhancements:
   - set inline_dentry by default
   - improve discard issue flow
   - add more fault injection cases in f2fs
   - allow block preallocation for encrypted files
   - introduce migrate_page callback function
   - avoid truncating the next direct node block at every checkpoint

  Bug fixes:
   - set page flag correctly between write_begin and write_end
   - missing error handling cases detected by fault injection
   - preallocate blocks regarding to 4KB alignement correctly
   - dentry and filename handling of encryption
   - lost xattrs of directories"

* tag 'for-f2fs-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (69 commits)
  f2fs: introduce update_ckpt_flags to clean up
  f2fs: don't submit irrelevant page
  f2fs: fix to commit bio cache after flushing node pages
  f2fs: introduce get_checkpoint_version for cleanup
  f2fs: remove dead variable
  f2fs: remove redundant io plug
  f2fs: support checkpoint error injection
  f2fs: fix to recover old fault injection config in ->remount_fs
  f2fs: do fault injection initialization in default_options
  f2fs: remove redundant value definition
  f2fs: support configuring fault injection per superblock
  f2fs: adjust display format of segment bit
  f2fs: remove dirty inode pages in error path
  f2fs: do not unnecessarily null-terminate encrypted symlink data
  f2fs: handle errors during recover_orphan_inodes
  f2fs: avoid gc in cp_error case
  f2fs: should put_page for summary page
  f2fs: assign return value in f2fs_gc
  f2fs: add customized migrate_page callback
  f2fs: introduce cp_lock to protect updating of ckpt_flags
  ...

Pull pstore updates from Kees Cook:

 - Fix bug in module unloading

 - Switch to always using spinlock over cmpxchg

 - Explicitly define pstore backend's supported modes

 - Remove bounce buffer from pmsg

 - Switch to using memcpy_to/fromio()

 - Error checking improvements

* tag 'pstore-v4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  ramoops: move spin_lock_init after kmalloc error checking
  pstore/ram: Use memcpy_fromio() to save old buffer
  pstore/ram: Use memcpy_toio instead of memcpy
  pstore/pmsg: drop bounce buffer
  pstore/ram: Set pstore flags dynamically
  pstore: Split pstore fragile flags
  pstore/core: drop cmpxchg based updates
  pstore/ramoops: fixup driver removal

Pull orangefs updates from Mike Marshall:
 "Miscellaneous improvements:
   - clean up debugfs globals
   - remove dead code in sysfs
   - reorganize duplicated sysfs attribute structs
   - consolidate sysfs show and store functions
   - remove duplicated sysfs_ops structures
   - describe organization of sysfs
   - make devreq_mutex static
   - g_orangefs_stats -> orangefs_stats for consistency
   - rename most remaining global variables

  Feature negotiation:
   - enable Orangefs userspace and kernel module to negotiate mutually
     supported features"

* tag 'for-linus-4.9-ofs1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux:
  Revert "orangefs: bump minimum userspace version"
  orangefs: bump minimum userspace version
  orangefs: rename most remaining global variables
  orangefs: g_orangefs_stats -> orangefs_stats for consistency
  orangefs: make devreq_mutex static
  orangefs: describe organization of sysfs
  orangefs: remove duplicated sysfs_ops structures
  orangefs: consolidate sysfs show and store functions
  orangefs: reorganize duplicated sysfs attribute structs
  orangefs: remove dead code in sysfs
  orangefs: clean up debugfs globals
  orangefs: do not allow client readahead cache without feature bit
  orangefs: add features op
  orangefs: record userspace version for feature compatbility
  orangefs: add readahead count and size to sysfs
  orangefs: re-add flush_racache from out-of-tree
  orangefs: turn param response value into union
  orangefs: add missing param request ops
  orangefs: rename remaining bits of mmap readahead cache

Pull tracing updates from Steven Rostedt:
 "This release cycle is rather small.  Just a few fixes to tracing.

  The big change is the addition of the hwlat tracer. It not only
  detects SMIs, but also other latency that's caused by the hardware. I
  have detected some latency from large boxes having bus contention"

* tag 'trace-v4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing: Call traceoff trigger after event is recorded
  ftrace/scripts: Add helper script to bisect function tracing problem functions
  tracing: Have max_latency be defined for HWLAT_TRACER as well
  tracing: Add NMI tracing in hwlat detector
  tracing: Have hwlat trace migrate across tracing_cpumask CPUs
  tracing: Add documentation for hwlat_detector tracer
  tracing: Added hardware latency tracer
  ftrace: Access ret_stack->subtime only in the function profiler
  function_graph: Handle TRACE_BPUTS in print_graph_comment
  tracing/uprobe: Drop isdigit() check in create_trace_uprobe

Pull xen updates from David Vrabel:
 "xen features and fixes for 4.9:

   - switch to new CPU hotplug mechanism

   - support driver_override in pciback

   - require vector callback for HVM guests (the alternate mechanism via
     the platform device has been broken for ages)"

* tag 'for-linus-4.9-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen/x86: Update topology map for PV VCPUs
  xen/x86: Initialize per_cpu(xen_vcpu, 0) a little earlier
  xen/pciback: support driver_override
  xen/pciback: avoid multiple entries in slot list
  xen/pciback: simplify pcistub device handling
  xen: Remove event channel notification through Xen PCI platform device
  xen/events: Convert to hotplug state machine
  xen/x86: Convert to hotplug state machine
  x86/xen: add missing \n at end of printk warning message
  xen/grant-table: Use kmalloc_array() in arch_gnttab_valloc()
  xen: Make VPMU init message look less scary
  xen: rename xen_pmu_init() in sys-hypervisor.c
  hotplug: Prevent alloc/free of irq descriptors during cpu up/down (again)
  xen/x86: Move irq allocation from Xen smp_op.cpu_up()

Pull KVM updates from Radim Krčmář:
 "All architectures:
   - move `make kvmconfig` stubs from x86
   - use 64 bits for debugfs stats

  ARM:
   - Important fixes for not using an in-kernel irqchip
   - handle SError exceptions and present them to guests if appropriate
   - proxying of GICV access at EL2 if guest mappings are unsafe
   - GICv3 on AArch32 on ARMv8
   - preparations for GICv3 save/restore, including ABI docs
   - cleanups and a bit of optimizations

  MIPS:
   - A couple of fixes in preparation for supporting MIPS EVA host
     kernels
   - MIPS SMP host & TLB invalidation fixes

  PPC:
   - Fix the bug which caused guests to falsely report lockups
   - other minor fixes
   - a small optimization

  s390:
   - Lazy enablement of runtime instrumentation
   - up to 255 CPUs for nested guests
   - rework of machine check deliver
   - cleanups and fixes

  x86:
   - IOMMU part of AMD's AVIC for vmexit-less interrupt delivery
   - Hyper-V TSC page
   - per-vcpu tsc_offset in debugfs
   - accelerated INS/OUTS in nVMX
   - cleanups and fixes"

* tag 'kvm-4.9-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (140 commits)
  KVM: MIPS: Drop dubious EntryHi optimisation
  KVM: MIPS: Invalidate TLB by regenerating ASIDs
  KVM: MIPS: Split kernel/user ASID regeneration
  KVM: MIPS: Drop other CPU ASIDs on guest MMU changes
  KVM: arm/arm64: vgic: Don't flush/sync without a working vgic
  KVM: arm64: Require in-kernel irqchip for PMU support
  KVM: PPC: Book3s PR: Allow access to unprivileged MMCR2 register
  KVM: PPC: Book3S PR: Support 64kB page size on POWER8E and POWER8NVL
  KVM: PPC: Book3S: Remove duplicate setting of the B field in tlbie
  KVM: PPC: BookE: Fix a sanity check
  KVM: PPC: Book3S HV: Take out virtual core piggybacking code
  KVM: PPC: Book3S: Treat VTB as a per-subcore register, not per-thread
  ARM: gic-v3: Work around definition of gic_write_bpr1
  KVM: nVMX: Fix the NMI IDT-vectoring handling
  KVM: VMX: Enable MSR-BASED TPR shadow even if APICv is inactive
  KVM: nVMX: Fix reload apic access page warning
  kvmconfig: add virtio-gpu to config fragment
  config: move x86 kvm_guest.config to a common location
  arm64: KVM: Remove duplicating init code for setting VMID
  ARM: KVM: Support vgic-v3
  ...

Pull namespace updates from Eric Biederman:
 "This set of changes is a number of smaller things that have been
  overlooked in other development cycles focused on more fundamental
  change. The devpts changes are small things that were a distraction
  until we managed to kill off DEVPTS_MULTPLE_INSTANCES. There is an
  trivial regression fix to autofs for the unprivileged mount changes
  that went in last cycle. A pair of ioctls has been added by Andrey
  Vagin making it is possible to discover the relationships between
  namespaces when referring to them through file descriptors.

  The big user visible change is starting to add simple resource limits
  to catch programs that misbehave. With namespaces in general and user
  namespaces in particular allowing users to use more kinds of
  resources, it has become important to have something to limit errant
  programs. Because the purpose of these limits is to catch errant
  programs the code needs to be inexpensive to use as it always on, and
  the default limits need to be high enough that well behaved programs
  on well behaved systems don't encounter them.

  To this end, after some review I have implemented per user per user
  namespace limits, and use them to limit the number of namespaces. The
  limits being per user mean that one user can not exhause the limits of
  another user. The limits being per user namespace allow contexts where
  the limit is 0 and security conscious folks can remove from their
  threat anlysis the code used to manage namespaces (as they have
  historically done as it root only). At the same time the limits being
  per user namespace allow other parts of the system to use namespaces.

  Namespaces are increasingly being used in application sand boxing
  scenarios so an all or nothing disable for the entire system for the
  security conscious folks makes increasing use of these sandboxes
  impossible.

  There is also added a limit on the maximum number of mounts present in
  a single mount namespace. It is nontrivial to guess what a reasonable
  system wide limit on the number of mount structure in the kernel would
  be, especially as it various based on how a system is using
  containers. A limit on the number of mounts in a mount namespace
  however is much easier to understand and set. In most cases in
  practice only about 1000 mounts are used. Given that some autofs
  scenarious have the potential to be 30,000 to 50,000 mounts I have set
  the default limit for the number of mounts at 100,000 which is well
  above every known set of users but low enough that the mount hash
  tables don't degrade unreaonsably.

  These limits are a start. I expect this estabilishes a pattern that
  other limits for resources that namespaces use will follow. There has
  been interest in making inotify event limits per user per user
  namespace as well as interest expressed in making details about what
  is going on in the kernel more visible"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (28 commits)
  autofs:  Fix automounts by using current_real_cred()->uid
  mnt: Add a per mount namespace limit on the number of mounts
  netns: move {inc,dec}_net_namespaces into #ifdef
  nsfs: Simplify __ns_get_path
  tools/testing: add a test to check nsfs ioctl-s
  nsfs: add ioctl to get a parent namespace
  nsfs: add ioctl to get an owning user namespace for ns file descriptor
  kernel: add a helper to get an owning user namespace for a namespace
  devpts: Change the owner of /dev/pts/ptmx to the mounter of /dev/pts
  devpts: Remove sync_filesystems
  devpts: Make devpts_kill_sb safe if fsi is NULL
  devpts: Simplify devpts_mount by using mount_nodev
  devpts: Move the creation of /dev/pts/ptmx into fill_super
  devpts: Move parse_mount_options into fill_super
  userns: When the per user per user namespace limit is reached return ENOSPC
  userns; Document per user per user namespace limits.
  mntns: Add a limit on the number of mount namespaces.
  netns: Add a limit on the number of net namespaces
  cgroupns: Add a limit on the number of cgroup namespaces
  ipcns: Add a  limit on the number of ipc namespaces
  ...

Pull xfs and iomap updates from Dave Chinner:
 "The main things in this update are the iomap-based DAX infrastructure,
  an XFS delalloc rework, and a chunk of fixes to how log recovery
  schedules writeback to prevent spurious corruption detections when
  recovery of certain items was not required.

  The other main chunk of code is some preparation for the upcoming
  reflink functionality. Most of it is generic and cleanups that stand
  alone, but they were ready and reviewed so are in this pull request.

  Speaking of reflink, I'm currently planning to send you another pull
  request next week containing all the new reflink functionality. I'm
  working through a similar process to the last cycle, where I sent the
  reverse mapping code in a separate request because of how large it
  was. The reflink code merge is even bigger than reverse mapping, so
  I'll be doing the same thing again....

  Summary for this update:

   - change of XFS mailing list to linux-xfs@vger.kernel.org

   - iomap-based DAX infrastructure w/ XFS and ext2 support

   - small iomap fixes and additions

   - more efficient XFS delayed allocation infrastructure based on iomap

   - a rework of log recovery writeback scheduling to ensure we don't
     fail recovery when trying to replay items that are already on disk

   - some preparation patches for upcoming reflink support

   - configurable error handling fixes and documentation

   - aio access time update race fixes for XFS and
     generic_file_read_iter"

* tag 'xfs-for-linus-4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs: (40 commits)
  fs: update atime before I/O in generic_file_read_iter
  xfs: update atime before I/O in xfs_file_dio_aio_read
  ext2: fix possible integer truncation in ext2_iomap_begin
  xfs: log recovery tracepoints to track current lsn and buffer submission
  xfs: update metadata LSN in buffers during log recovery
  xfs: don't warn on buffers not being recovered due to LSN
  xfs: pass current lsn to log recovery buffer validation
  xfs: rework log recovery to submit buffers on LSN boundaries
  xfs: quiesce the filesystem after recovery on readonly mount
  xfs: remote attribute blocks aren't really userdata
  ext2: use iomap to implement DAX
  ext2: stop passing buffer_head to ext2_get_blocks
  xfs: use iomap to implement DAX
  xfs: refactor xfs_setfilesize
  xfs: take the ilock shared if possible in xfs_file_iomap_begin
  xfs: fix locking for DAX writes
  dax: provide an iomap based fault handler
  dax: provide an iomap based dax read/write path
  dax: don't pass buffer_head to copy_user_dax
  dax: don't pass buffer_head to dax_insert_mapping
  ...

Pull networking fixups from David Miller:
 "Here are the build and merge fixups for the networking stuff"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
  phy: micrel.c: Enable ksz9031 energy-detect power-down mode
  netfilter: merge fixup for "nf_tables_netdev: remove redundant ip_hdr assignment"
  netfilter: nft_limit: fix divided by zero panic
  netfilter: fix namespace handling in nf_log_proc_dostring
  netfilter: xt_hashlimit: Fix link error in 32bit arch because of 64bit division
  netfilter: accommodate different kconfig in nf_set_hooks_head
  netfilter: Fix potential null pointer dereference

Pull sparc updates from David Miller:
 "Besides some cleanups the major thing here is supporting relaxed
  ordering PCIe transactions on newer sparc64 machines, from Chris
  Hyser"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
  sparc: fixing ident and beautifying code
  sparc64: Enable setting "relaxed ordering" in IOMMU mappings
  sparc64: Enable PCI IOMMU version 2 API
  sparc: migrate exception table users off module.h and onto extable.h

Pull ARM updates from Russell King:

 - Correct ARMs dma-mapping to use the correct printk format strings.

 - Avoid defining OBJCOPYFLAGS globally which upsets lkdtm rodata
   testing.

 - Cleanups to ARMs asm/memory.h include.

 - L2 cache cleanups.

 - Allow flat nommu binaries to be executed on ARM MMU systems.

 - Kernel hardening - add more read-only after init annotations,
   including making some kernel vdso variables const.

 - Ensure AMBA primecell clocks are appropriately defaulted.

 - ARM breakpoint cleanup.

 - Various StrongARM 11x0 and companion chip (SA1111) updates to bring
   this legacy platform to use more modern APIs for (eg) GPIOs and
   interrupts, which will allow us in the future to reduce some of the
   board-level driver clutter and elimate function callbacks into board
   code via platform data. There still appears to be interest in these
   platforms!

 - Remove the now redundant secure_flush_area() API.

 - Module PLT relocation optimisations. Ard says: This series of 4
   patches optimizes the ARM PLT generation code that is invoked at
   module load time, to get rid of the O(n^2) algorithm that results in
   pathological load times of 10 seconds or more for large modules on
   certain STB platforms.

 - ARMv7M cache maintanence support.

 - L2 cache PMU support

* 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: (35 commits)
  ARM: sa1111: provide to_sa1111_device() macro
  ARM: sa1111: add sa1111_get_irq()
  ARM: sa1111: clean up duplication in IRQ chip implementation
  ARM: sa1111: implement a gpio_chip for SA1111 GPIOs
  ARM: sa1111: move irq cleanup to separate function
  ARM: sa1111: use devm_clk_get()
  ARM: sa1111: use devm_kzalloc()
  ARM: sa1111: ensure we only touch RAB bus type devices when removing
  ARM: 8611/1: l2x0: add PMU support
  ARM: 8610/1: V7M: Add dsb before jumping in handler mode
  ARM: 8609/1: V7M: Add support for the Cortex-M7 processor
  ARM: 8608/1: V7M: Indirect proc_info construction for V7M CPUs
  ARM: 8607/1: V7M: Wire up caches for V7M processors with cache support.
  ARM: 8606/1: V7M: introduce cache operations
  ARM: 8605/1: V7M: fix notrace variant of save_and_disable_irqs
  ARM: 8604/1: V7M: Add support for reading the CTR with read_cpuid_cachetype()
  ARM: 8603/1: V7M: Add addresses for mem-mapped V7M cache operations
  ARM: 8602/1: factor out CSSELR/CCSIDR operations that use cp15 directly
  ARM: kernel: avoid brute force search on PLT generation
  ARM: kernel: sort relocation sections before allocating PLTs
  ...

Pull ARM fix from Russell King:
 "A 5% error in delay calculation was introduced during the last merge
  window, which had gone un-noticed until yesterday"

* 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: fix delays

Early during boot topology_update_package_map() computes
logical_pkg_ids for all present processors.

Later, when processors are brought up, identify_cpu() updates
these values based on phys_pkg_id which is a function of
initial_apicid. On PV guests the latter may point to a
non-existing node, causing logical_pkg_ids to be set to -1.

Intel's RAPL uses logical_pkg_id (as topology_logical_package_id())
to index its arrays and therefore in this case will point to index
65535 (since logical_pkg_id is a u16). This could lead to either a
crash or may actually access random memory location.

As a workaround, we recompute topology during CPU bringup to reset
logical_pkg_id to a valid value.

(The reason for initial_apicid being bogus is because it is
initial_apicid of the processor from which the guest is launched.
This value is CPUID(1).EBX[31:24])
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: stable@vger.kernel.org
Signed-off-by: David Vrabel <david.vrabel@citrix.com>

Commit 215e362d ("ARM: 8306/1: loop_udelay: remove bogomips value
limitation") tried to increase the bogomips limitation, but in doing
so messed up udelay such that it always gives about a 5% error in the
delay, even if we use a timer.

The calculation is:

	loops = UDELAY_MULT * us_delay * ticks_per_jiffy >> UDELAY_SHIFT

Originally, UDELAY_MULT was ((UL(2199023) * HZ) >> 11) and UDELAY_SHIFT
30.  Assuming HZ=100, us_delay of 1000 and ticks_per_jiffy of 1660000
(eg, 166MHz timer, 1ms delay) this would calculate:

	((UL(2199023) * HZ) >> 11) * 1000 * 1660000 >> 30
		=> 165999

With the new values of 2047 * HZ + 483648 * HZ / 1000000 and 31, we get:

	(2047 * HZ + 483648 * HZ / 1000000) * 1000 * 1660000 >> 31
		=> 158269

which is incorrect.  This is due to a typo - correcting it gives:

	(2147 * HZ + 483648 * HZ / 1000000) * 1000 * 1660000 >> 31
		=> 165999

i.o.w, the original value.

Fixes: 215e362d ("ARM: 8306/1: loop_udelay: remove bogomips value limitation")
Cc: <stable@vger.kernel.org>
Reviewed-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>

Good evening,

Following LinuxCodingStyle documentation and with the help of Sam, fixed
severals identation issues in the code, and few others cosmetic changes

And last and i hope least fixing my name :)

Signed-off-by : Dominique Carrel <netmonk@netmonk.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Chris Hyser says:

====================
sparc64: PCIe performance enhancements

Ver 2 is redone for 4.8 where commit 00085f1e
changed DMA attributes from struct pointer to unsigned long.

This set of patches initiates a series of PCIe performance enhancement patch
submittals.

Patch 1/2 enables version 2 of the SPARC sun4v IOMMU I/O address translation
services need for subsequent enhancements.

Patch 2/2 allows drivers to specify DMA_ATTR_WEAK_ORDERING via DMA attributes
to the SPARC DMA mapping routines enabling "relaxed ordering" for the buffer
being mapped.

[Still relevant write-up]
PCI-Express Relaxed Ordering and the Sun SPARC Enterprise M-class Servers
https://blogs.oracle.com/olympus/entry/relaxed_ordering
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Enable relaxed ordering for memory writes in IOMMU TSB entry from
dma_4v_alloc_coherent(), dma_4v_map_page() and dma_4v_map_sg() when
dma_attrs DMA_ATTR_WEAK_ORDERING is set. This requires PCI IOMMU I/O
Translation Services version 2.0 API.

Many PCIe devices allow enabling relaxed-ordering (memory writes bypassing
other memory writes) for various DMA buffers. A notable exception is the
Mellanox mlx4 IB adapter. Due to the nature of x86 HW this appears to have
little performance impact there. On SPARC HW however, this results in major
performance degradation getting only about 3Gbps. Enabling RO in the IOMMU
entries corresponding to mlx4 data buffers increases the throughput to
about 13 Gbps.

Orabug: 19245907
Signed-off-by: Chris Hyser <chris.hyser@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Enable Version 2 of the PCI IOMMU API needed for advanced features
such as PCI Relaxed Ordering and greater than 2 GB DMA address
space per root complex.
Signed-off-by: Chris Hyser <chris.hyser@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

These files were only including module.h for exception table
related functions.  We've now separated that content out into its
own file "extable.h" so now move over to that and avoid all the
extra header content in module.h that we don't really need to compile
these files.

Cc: "David S. Miller" <davem@davemloft.net>
Cc: sparclinux@vger.kernel.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Set bit 0 in register 1C.23 to enable the EDPD feature of the
KSZ9031 PHY. This reduces power consumption when the link is
down.
Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull m68knommu updates from Greg Ungerer:
 "The bulk of the changes here are to clean up the ColdFire 5441x SoC
  support so that it can run with MMU enabled. We have only supported it
  with MMU disabled up to now.

  There is also a few individual bug fixes across the ColdFire support
  code"

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
  m68k: let clk_disable() return immediately if clk is NULL
  m68knommu: convert printk(KERN_INFO) to pr_info()
  m68knommu: clean up uClinux boot log output
  m68k: generalize uboot command line support
  m68k: don't panic if no hardware FPU defined
  m68k: only generate FPU instructions if CONFIG_FPU enabled
  m68k: always make available dump_fpu()
  m68k: generalize io memory region setup for ColdFire ACR registers
  m68k: move ColdFire _bootmem_alloc code
  m68k: report correct FPU type on ColdFire MMU platforms
  m68k: set appropriate machine type for m5411x SoC platforms
  m68k: move CONFIG_FPU set to per-CPU configuration
  m68knommu: fix IO write size in nettel pin set
  m68knommu: switch to using IO access methods in WildFire board code
  m68knommu: fix early setup to not access variables