- 03 Feb, 2023 22 commits
-
-
Christoph Hellwig authored
A small wrapper around bvec_set_page for callers that have a virtual address. Signed-off-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by:
Johannes Thumshirn <johannes.thumshirn@wdc.com> Link: https://lore.kernel.org/r/20230203150634.3199647-4-hch@lst.deSigned-off-by:
Jens Axboe <axboe@kernel.dk>
-
Christoph Hellwig authored
A smaller wrapper around bvec_set_page that takes a folio instead. There are only two potential users for this in the tree, but the number will grow in the future. Signed-off-by:
-
Christoph Hellwig authored
Add a helper to initialize a bvec based of a page pointer. This will help removing various open code bvec initializations. Signed-off-by:
-
Christoph Hellwig authored
cgroup information only makes sense on a live gendisk that allows file system I/O (which includes the raw block device). So move over the cgroup related members. Signed-off-by:
Andreas Herrmann <aherrmann@suse.de> Acked-by:
Tejun Heo <tj@kernel.org> Link: https://lore.kernel.org/r/20230203150400.3199230-20-hch@lst.deSigned-off-by:
-
Christoph Hellwig authored
Pass a gendisk to blkg_lookup and use that to find the match as part of phasing out usage of the request_queue in the blk-cgroup code. Signed-off-by:
-
Christoph Hellwig authored
No need to the request_queue here, pass a gendisk and extract the node ids from that. Signed-off-by:
-
Christoph Hellwig authored
Prepare for storing the blkcg information in the gendisk instead of the request_queue. Signed-off-by:
-
Christoph Hellwig authored
This is what about half of the users already want, and it's only going to grow more. Signed-off-by:
-
Christoph Hellwig authored
These op vectors are constant, so mark them const. Signed-off-by:
-
Christoph Hellwig authored
Switch to passing a gendisk, and make rq_qos_add initialize all required fields and drop the not required q argument from rq_qos_del. Signed-off-by:
-
Christoph Hellwig authored
These two functions are rather larger and not in a fast path, so move them out of line. Signed-off-by:
-
Christoph Hellwig authored
wbt_queue_depth_changed just updates a field and calls another function. Open code it in wbt_init, so that the local queue variable can be used instead of the one stored in the rq_qos. This will allow delaying that rq_qos->queue assignment in a subsequent patch. Signed-off-by:
-
Christoph Hellwig authored
A large part of blk-wbt.h is only used in blk-wbt.c, so move it there. Signed-off-by:
-
Christoph Hellwig authored
Pass a gendisk to wbt_init to prepare for phasing out usage of the request_queue in the blk-cgroup code. Signed-off-by:
-
Christoph Hellwig authored
Pass a gendisk to wbt_enable_default and wbt_disable_default to prepare for phasing out usage of the request_queue in the blk-cgroup code. Signed-off-by:
-
Christoph Hellwig authored
Switch from a request_queue pointer and reference to a gendisk once for the throttle information in struct task_struct. Signed-off-by:
-
Christoph Hellwig authored
Currently each blkcg_gq holds a request_queue reference, which is what is used in the policies. But a lot of these interfaces will move over to use a gendisk, so store a disk in struct blkcg_gq and hold a reference to it. Signed-off-by:
-
Christoph Hellwig authored
bdi_dev_name already performs the same check. Signed-off-by:
-
Christoph Hellwig authored
There is no need to delay freeing a blkg to a workqueue when freeing it after an initialization failure. Signed-off-by:
-
Christoph Hellwig authored
Unwind only the previous initialization steps that happened in blkg_alloc using goto based unwinding. This avoids the need for the !queue special case in blkg_free and thus ensures that any blkg seens outside of blkg_alloc is always fully constructed. Signed-off-by:
-
Christoph Hellwig authored
There is no need to initialize the cgroup code before the disk is marked live. Moving the cgroup initialization earlier will help to have a fully initialized struct device in the gendisk for the cgroup code to use in the future. Similarly tear the cgroup information down in del_gendisk to be symmetric and because none of the cgroup tracking is needed once non-passthrough I/O stops. Signed-off-by:
-
Christoph Hellwig authored
blk_throtl_stat_add is called from blk_stat_add explicitly, unlike the other stats that go through q->stats->callbacks. To prepare for cgroup data moving to the gendisk, ensure blk_throtl_stat_add is only called for the plain READ and WRITE commands that it actually handles internally, as blk_stat_add can also be called for passthrough commands on queues that do not have a gendisk associated with them. Signed-off-by:
-
- 02 Feb, 2023 1 commit
-
-
Jens Axboe authored
Merge branch 'md-next' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md into for-6.3/block Pull MD updates from Song: "Non-urgent fixes: md: don't update recovery_cp when curr_resync is ACTIVE md: Free writes_pending in md_stop Performance optimization: md: Change active_io to percpu" * 'md-next' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md: md: use MD_RESYNC_* whenever possible md: Free writes_pending in md_stop md: Change active_io to percpu md: Factor out is_md_suspended helper md: don't update recovery_cp when curr_resync is ACTIVE
-
- 01 Feb, 2023 6 commits
-
-
Hou Tao authored
Just replace magic numbers by MD_RESYNC_* enumerations. Signed-off-by:
Hou Tao <houtao1@huawei.com> Reviewed-by:
Logan Gunthorpe <logang@deltatee.com> Signed-off-by:
Song Liu <song@kernel.org>
-
Xiao Ni authored
dm raid calls md_stop to stop the raid device. It needs to free the writes_pending here. Signed-off-by:
Xiao Ni <xni@redhat.com> Signed-off-by:
-
Xiao Ni authored
Now the type of active_io is atomic. It's used to count how many ios are in the submitting process and it's added and decreased very time. But it only needs to check if it's zero when suspending the raid. So we can switch atomic to percpu to improve the performance. After switching active_io to percpu type, we use the state of active_io to judge if the raid device is suspended. And we don't need to wake up ->sb_wait in md_handle_request anymore. It's done in the callback function which is registered when initing active_io. The argument mddev->suspended is only used to count how many users are trying to set raid to suspend state. Signed-off-by:
-
Xiao Ni authored
This helper function will be used in next patch. It's easy for understanding. Signed-off-by:
-
Hou Tao authored
Don't update recovery_cp when curr_resync is MD_RESYNC_ACTIVE, otherwise md may skip the resync of the first 3 sectors if the resync procedure is interrupted before the first calling of ->sync_request() as shown below: md_do_sync thread control thread // setup resync mddev->recovery_cp = 0 j = 0 mddev->curr_resync = MD_RESYNC_ACTIVE // e.g., set array as idle set_bit(MD_RECOVERY_INTR, &&mddev_recovery) // resync loop // check INTR before calling sync_request !test_bit(MD_RECOVERY_INTR, &mddev->recovery // resync interrupted // update recovery_cp from 0 to 3 // the resync of three 3 sectors will be skipped mddev->recovery_cp = 3 Fixes: eac58d08 ("md: Use enum for overloaded magic numbers used by mddev->curr_resync") Cc: stable@vger.kernel.org # 6.0+ Signed-off-by: -
Bart Van Assche authored
Make the following minor changes which were reported by colleagues while reviewing this code: - Remove the parentheses from around the LOOP_DEFAULT_HW_Q_DEPTH definition since these are superfluous. - Accept other number formats than decimal, e.g. hexadecimal. - Do not set hw_queue_depth to an out-of-range value, even if that value won't be used. - Use the LOOP_DEFAULT_HW_Q_DEPTH macro in the kernel module parameter description to prevent that the description gets out of sync. This patch has been tested as follows: # modprobe -r loop # modprobe loop hw_queue_depth=-1 modprobe: ERROR: could not insert 'loop': Invalid argument # modprobe loop hw_queue_depth=0 modprobe: ERROR: could not insert 'loop': Invalid argument # modprobe loop hw_queue_depth=1; cat /sys/module/loop/parameters/hw_queue_depth 1 # modprobe -r loop; modprobe loop; cat /sys/module/loop/parameters/hw_queue_depth hw_queue_depth=0x10 16 # modprobe -r loop; modprobe loop; cat /sys/module/loop/parameters/hw_queue_depth hw_queue_depth=128 128 # modprobe -r loop; modprobe loop hw_queue_depth=129; cat /sys/module/loop/parameters/hw_queue_depth 129 # modprobe -r loop; modprobe loop hw_queue_depth=$((1<<32)) modprobe: ERROR: could not insert 'loop': Numerical result out of range See also commit ef44c508 ("loop: allow user to set the queue depth"). Cc: Chaitanya Kulkarni <kch@nvidia.com> Cc: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by:
Bart Van Assche <bvanassche@acm.org> Reviewed-by:
-
- 31 Jan, 2023 2 commits
-
-
Matthew Wilcox authored
This was originally added for the definition of nth_page(), but we no longer use nth_page() in this header, so we can drop the heavyweight mm.h now. Signed-off-by:
Matthew Wilcox (Oracle) <willy@infradead.org> Link: https://lore.kernel.org/r/20230131050132.2627124-1-willy@infradead.orgSigned-off-by:
-
Ming Lei authored
Owner of one unprivileged ublk device could be one evil user, which can grant this disk's privilege to other users deliberately, and this way could be like making one trap and waiting for other users to be caught. So only owner to open unprivileged disk even though the owner grants disk privilege to other user. This way is reasonable too given anyone can create ublk disk, and no need other's grant. Reported-by:
Stefan Hajnoczi <stefanha@redhat.com> Fixes: 4093cb5a ("ublk_drv: add mechanism for supporting unprivileged ublk device") Signed-off-by:
Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20230131040446.214583-1-ming.lei@redhat.comSigned-off-by:
-
- 30 Jan, 2023 9 commits
-
-
Ulf Hansson authored
Assuming that both Kconfig options, BLK_CGROUP and IOSCHED_BFQ are set, we most likely want cgroup support for BFQ too (BFQ_GROUP_IOSCHED), so let's make it default y. Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20230130121240.159456-1-ulf.hansson@linaro.orgSigned-off-by:
-
Kemeng Shi authored
bfqd->bfq_wr_max_time is set to 0 in bfq_init_queue and is never changed. It is only used in bfq_wr_duration when bfq_wr_max_time > 0 which never meets, so bfqd->bfq_wr_max_time is not used actually. Just remove it. Signed-off-by:
Kemeng Shi <shikemeng@huaweicloud.com> Reviewed-by:
Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20230116095153.3810101-9-shikemeng@huaweicloud.comSigned-off-by:
-
Kemeng Shi authored
We jump to tag only for returning current rq. Return directly to remove this tag. Reviewed-by:
Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by:
-
Kemeng Shi authored
We have already avoided a circular list in bfq_setup_merge (see comments in bfq_setup_merge() for details), so bfq_queue will not appear in it's new_bfqq list. Just remove this check. Signed-off-by:
-
Kemeng Shi authored
The async_bfqq is assigned with bfqq->bic->bfqq[0], use it directly. Signed-off-by:
-
Kemeng Shi authored
Use helper macro RQ_BFQQ to get bfqq of request. Signed-off-by:
-
Kemeng Shi authored
Inject limit is updated or reset when time_is_before_eq_jiffies( decrease_time_jif + several msecs) or think-time state changes. decrease_time_jif is initialized to 0 and will be set to current jiffies when inject limit is updated or reset. If the jiffies is slightly greater than LONG_MAX, time_is_after_eq_jiffies(0) will keep for a long time, so as time_is_after_eq_jiffies(decrease_time_jif + several msecs). If the think-time state never chages, then the injection will not work as expected for long time. To be more specific: Function bfq_update_inject_limit maybe triggered when jiffies pasts decrease_time_jif + msecs_to_jiffies(10) in bfq_add_request by setting bfqd->wait_dispatch to true. Function bfq_reset_inject_limit are called in two conditions: 1. jiffies pasts bfqq->decrease_time_jif + msecs_to_jiffies(1000) in function bfq_add_request. 2. jiffies pasts bfqq->decrease_time_jif + msecs_to_jiffies(100) or bfq think-time state change from short to long. Fix this by initializing bfqq->decrease_time_jif to current jiffies to trigger service injection soon when service injection conditions are met. Signed-off-by:
-
Kemeng Shi authored
Parameter reason is never used, just remove it. Signed-off-by:
-
Kemeng Shi authored
Function bfq_choose_bfqq_for_injection may temporarily raise inject limit to one request if current inject_limit is 0 before search of the source queue for injection. However the search below will reset inject limit to bfqd->in_service_queue which is zero for raised inject limit. Then the temporarily raised inject limit never works as expected. Assigment limit to bfqd->in_service_queue in search is needed as limit maybe overwriten to min_t(unsigned int, 1, limit) for condition that a large in-flight request is on non-rotational devices in found queue. So we need to reset limit to bfqd->in_service_queue for normal case. Actually, we have already make sure bfqd->rq_in_driver is < limit before search, then -Limit is >= 1 as bfqd->rq_in_driver is >= 0. Then min_t(unsigned int, 1, limit) is always 1. So we can simply check bfqd->rq_in_driver with 1 instead of result of min_t(unsigned int, 1, limit) for larget request in non-rotational device case to avoid overwritting limit and the bug is gone. -For normal case, we have already check bfqd->rq_in_driver is < limit, so we can return found bfqq unconditionally to remove unncessary check. Signed-off-by:
-
