- 17 Aug, 2015 40 commits
-
-
Dan Carpenter authored
commit 44008f08 upstream. Smatch complains that we have nested checks for "spdif_present". It turns out the current behavior isn't correct, we should remove the first check and keep the second. Fixes: 1077a024 ('ALSA: hda - Use generic parser for Cirrus codec driver') Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Roger Quadros authored
commit 9a258afa upstream. For hwmods without sysc, _init_mpu_rt_base(oh) won't be called and so _find_mpu_rt_port(oh) will return NULL thus preventing ready state check on those modules after the module is enabled. This can potentially cause a bus access error if the module is accessed before the module is ready. Fix this by unconditionally calling _init_mpu_rt_base() during hwmod _init(). Do ioremap only if we need SYSC access. Eventhough _wait_target_ready() check doesn't really need MPU RT port but just the PRCM registers, we still mandate that the hwmod must have an MPU RT port if ready state check needs to be done. Else it would mean that the module is not accessible by MPU so there is no point in waiting for target to be ready. e.g. this fixes the below DCAN bus access error on AM437x-gp-evm. [ 16.672978] ------------[ cut here ]------------ [ 16.677885] WARNING: CPU: 0 PID: 1580 at drivers/bus/omap_l3_noc.c:147 l3_interrupt_handler+0x234/0x35c() [ 16.687946] 44000000.ocp:L3 Custom Error: MASTER M2 (64-bit) TARGET L4_PER_0 (Read): Data Access in User mode during Functional access [ 16.700654] Modules linked in: xhci_hcd btwilink ti_vpfe dwc3 videobuf2_core ov2659 bluetooth v4l2_common videodev ti_am335x_adc kfifo_buf industrialio c_can_platform videobuf2_dma_contig media snd_soc_tlv320aic3x pixcir_i2c_ts c_can dc [ 16.731144] CPU: 0 PID: 1580 Comm: rpc.statd Not tainted 3.14.26-02561-gf733aa036398 #180 [ 16.739747] Backtrace: [ 16.742336] [<c0011108>] (dump_backtrace) from [<c00112a4>] (show_stack+0x18/0x1c) [ 16.750285] r6:00000093 r5:00000009 r4:eab5b8a8 r3:00000000 [ 16.756252] [<c001128c>] (show_stack) from [<c05a4418>] (dump_stack+0x20/0x28) [ 16.763870] [<c05a43f8>] (dump_stack) from [<c0037120>] (warn_slowpath_common+0x6c/0x8c) [ 16.772408] [<c00370b4>] (warn_slowpath_common) from [<c00371e4>] (warn_slowpath_fmt+0x38/0x40) [ 16.781550] r8:c05d1f90 r7:c0730844 r6:c0730448 r5:80080003 r4:ed0cd210 [ 16.788626] [<c00371b0>] (warn_slowpath_fmt) from [<c027fa94>] (l3_interrupt_handler+0x234/0x35c) [ 16.797968] r3:ed0cd480 r2:c0730508 [ 16.801747] [<c027f860>] (l3_interrupt_handler) from [<c0063758>] (handle_irq_event_percpu+0x54/0x1bc) [ 16.811533] r10:ed005600 r9:c084855b r8:0000002a r7:00000000 r6:00000000 r5:0000002a [ 16.819780] r4:ed0e6d80 [ 16.822453] [<c0063704>] (handle_irq_event_percpu) from [<c00638f0>] (handle_irq_event+0x30/0x40) [ 16.831789] r10:eb2b6938 r9:eb2b6960 r8:bf011420 r7:fa240100 r6:00000000 r5:0000002a [ 16.840052] r4:ed005600 [ 16.842744] [<c00638c0>] (handle_irq_event) from [<c00661d8>] (handle_fasteoi_irq+0x74/0x128) [ 16.851702] r4:ed005600 r3:00000000 [ 16.855479] [<c0066164>] (handle_fasteoi_irq) from [<c0063068>] (generic_handle_irq+0x28/0x38) [ 16.864523] r4:0000002a r3:c0066164 [ 16.868294] [<c0063040>] (generic_handle_irq) from [<c000ef60>] (handle_IRQ+0x38/0x8c) [ 16.876612] r4:c081c640 r3:00000202 [ 16.880380] [<c000ef28>] (handle_IRQ) from [<c00084f0>] (gic_handle_irq+0x30/0x5c) [ 16.888328] r6:eab5ba38 r5:c0804460 r4:fa24010c r3:00000100 [ 16.894303] [<c00084c0>] (gic_handle_irq) from [<c05a8d80>] (__irq_svc+0x40/0x50) [ 16.902193] Exception stack(0xeab5ba38 to 0xeab5ba80) [ 16.907499] ba20: 00000000 00000006 [ 16.916108] ba40: fa1d0000 fa1d0008 ed3d3000 eab5bab4 ed3d3460 c0842af4 bf011420 eb2b6960 [ 16.924716] ba60: eb2b6938 eab5ba8c eab5ba90 eab5ba80 bf035220 bf07702c 600f0013 ffffffff [ 16.933317] r7:eab5ba6c r6:ffffffff r5:600f0013 r4:bf07702c [ 16.939317] [<bf077000>] (c_can_plat_read_reg_aligned_to_16bit [c_can_platform]) from [<bf035220>] (c_can_get_berr_counter+0x38/0x64 [c_can]) [ 16.952696] [<bf0351e8>] (c_can_get_berr_counter [c_can]) from [<bf010294>] (can_fill_info+0x124/0x15c [can_dev]) [ 16.963480] r5:ec8c9740 r4:ed3d3000 [ 16.967253] [<bf010170>] (can_fill_info [can_dev]) from [<c0502fa8>] (rtnl_fill_ifinfo+0x58c/0x8fc) [ 16.976749] r6:ec8c9740 r5:ed3d3000 r4:eb2b6780 [ 16.981613] [<c0502a1c>] (rtnl_fill_ifinfo) from [<c0503408>] (rtnl_dump_ifinfo+0xf0/0x1dc) [ 16.990401] r10:ec8c9740 r9:00000000 r8:00000000 r7:00000000 r6:ebd4d1b4 r5:ed3d3000 [ 16.998671] r4:00000000 [ 17.001342] [<c0503318>] (rtnl_dump_ifinfo) from [<c050e6e4>] (netlink_dump+0xa8/0x1e0) [ 17.009772] r10:00000000 r9:00000000 r8:c0503318 r7:ebf3e6c0 r6:ebd4d1b4 r5:ec8c9740 [ 17.018050] r4:ebd4d000 [ 17.020714] [<c050e63c>] (netlink_dump) from [<c050ec10>] (__netlink_dump_start+0x104/0x154) [ 17.029591] r6:eab5bd34 r5:ec8c9980 r4:ebd4d000 [ 17.034454] [<c050eb0c>] (__netlink_dump_start) from [<c0505604>] (rtnetlink_rcv_msg+0x110/0x1f4) [ 17.043778] r7:00000000 r6:ec8c9980 r5:00000f40 r4:ebf3e6c0 [ 17.049743] [<c05054f4>] (rtnetlink_rcv_msg) from [<c05108e8>] (netlink_rcv_skb+0xb4/0xc8) [ 17.058449] r8:eab5bdac r7:ec8c9980 r6:c05054f4 r5:ec8c9980 r4:ebf3e6c0 [ 17.065534] [<c0510834>] (netlink_rcv_skb) from [<c0504134>] (rtnetlink_rcv+0x24/0x2c) [ 17.073854] r6:ebd4d000 r5:00000014 r4:ec8c9980 r3:c0504110 [ 17.079846] [<c0504110>] (rtnetlink_rcv) from [<c05102ac>] (netlink_unicast+0x180/0x1ec) [ 17.088363] r4:ed0c6800 r3:c0504110 [ 17.092113] [<c051012c>] (netlink_unicast) from [<c0510670>] (netlink_sendmsg+0x2ac/0x380) [ 17.100813] r10:00000000 r8:00000008 r7:ec8c9980 r6:ebd4d000 r5:eab5be70 r4:eab5bee4 [ 17.109083] [<c05103c4>] (netlink_sendmsg) from [<c04dfdb4>] (sock_sendmsg+0x90/0xb0) [ 17.117305] r10:00000000 r9:eab5a000 r8:becdda3c r7:0000000c r6:ea978400 r5:eab5be70 [ 17.125563] r4:c05103c4 [ 17.128225] [<c04dfd24>] (sock_sendmsg) from [<c04e1c28>] (SyS_sendto+0xb8/0xdc) [ 17.136001] r6:becdda5c r5:00000014 r4:ecd37040 [ 17.140876] [<c04e1b70>] (SyS_sendto) from [<c000e680>] (ret_fast_syscall+0x0/0x30) [ 17.148923] r10:00000000 r8:c000e804 r7:00000122 r6:becdda5c r5:0000000c r4:becdda5c [ 17.157169] ---[ end trace 2b71e15b38f58bad ]--- Fixes: 6423d6df ("ARM: OMAP2+: hwmod: check for module address space during init") Signed-off-by:
Roger Quadros <rogerq@ti.com> Signed-off-by:
Paul Walmsley <paul@pwsan.com> Signed-off-by:
-
Denis Carikli authored
commit e053f96b upstream. Since commit 3d42a379 ("can: flexcan: add 2nd clock to support imx53 and newer") the can driver requires a dt nodes to have a second clock. Add them to imx35 to fix probing the flex can driver on the respective platforms. Signed-off-by:
Denis Carikli <denis@eukrea.com> Signed-off-by:
Shawn Guo <shawnguo@kernel.org> Signed-off-by:
-
Ilya Dryomov authored
commit 2761713d upstream. For write/discard obj_requests that involved a copyup method call, the opcode of the first op is CEPH_OSD_OP_CALL and the ->callback is rbd_img_obj_copyup_callback(). The latter frees copyup pages, sets ->xferred and delegates to rbd_img_obj_callback(), the "normal" image object callback, for reporting to block layer and putting refs. rbd_osd_req_callback() however treats CEPH_OSD_OP_CALL as a trivial op, which means obj_request is marked done in rbd_osd_trivial_callback(), *before* ->callback is invoked and rbd_img_obj_copyup_callback() has a chance to run. Marking obj_request done essentially means giving rbd_img_obj_callback() a license to end it at any moment, so if another obj_request from the same img_request is being completed concurrently, rbd_img_obj_end_request() may very well be called on such prematurally marked done request: <obj_request-1/2 reply> handle_reply() rbd_osd_req_callback() rbd_osd_trivial_callback() rbd_obj_request_complete() rbd_img_obj_copyup_callback() rbd_img_obj_callback() <obj_request-2/2 reply> handle_reply() rbd_osd_req_callback() rbd_osd_trivial_callback() for_each_obj_request(obj_request->img_request) { rbd_img_obj_end_request(obj_request-1/2) rbd_img_obj_end_request(obj_request-2/2) <-- } Calling rbd_img_obj_end_request() on such a request leads to trouble, in particular because its ->xfferred is 0. We report 0 to the block layer with blk_update_request(), get back 1 for "this request has more data in flight" and then trip on rbd_assert(more ^ (which == img_request->obj_request_count)); with rhs (which == ...) being 1 because rbd_img_obj_end_request() has been called for both requests and lhs (more) being 1 because we haven't got a chance to set ->xfferred in rbd_img_obj_copyup_callback() yet. To fix this, leverage that rbd wants to call class methods in only two cases: one is a generic method call wrapper (obj_request is standalone) and the other is a copyup (obj_request is part of an img_request). So make a dedicated handler for CEPH_OSD_OP_CALL and directly invoke rbd_img_obj_copyup_callback() from it if obj_request is part of an img_request, similar to how CEPH_OSD_OP_READ handler invokes rbd_img_obj_request_read_callback(). Since rbd_img_obj_copyup_callback() is now being called from the OSD request callback (only), it is renamed to rbd_osd_copyup_callback(). Cc: Alex Elder <elder@linaro.org> Signed-off-by:
Ilya Dryomov <idryomov@gmail.com> Reviewed-by:
Alex Elder <elder@linaro.org> Signed-off-by:
-
Herbert Xu authored
commit f898c522 upstream. This patch removes a bogus BUG_ON in the ablkcipher path that triggers when the destination buffer is different from the source buffer and is scattered. Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Tadeusz Struk authored
commit 6f043b50 upstream. The synchronization method used atomic was bogus. Use a proper synchronization with mutex. Signed-off-by:
Tadeusz Struk <tadeusz.struk@intel.com> Signed-off-by:
-
Martin Schwidefsky authored
commit 17fb874d upstream. The kthread_run() function can return two different error values but the hwrng core only checks for -ENOMEM. If the other error value -EINTR is returned it is assigned to hwrng_fill and later used on a kthread_stop() call which naturally crashes. Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Marek Marczykowski-Górecki authored
commit 30b03d05 upstream. While gntdev_release() is called the MMU notifier is still registered and can traverse priv->maps list even if no pages are mapped (which is the case -- gntdev_release() is called after all). But gntdev_release() will clear that list, so make sure that only one of those things happens at the same time. Signed-off-by:
Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> Signed-off-by:
David Vrabel <david.vrabel@citrix.com> Signed-off-by:
-
Andy Lutomirski authored
commit aa1acff3 upstream. The update_va_mapping hypercall can fail if the VA isn't present in the guest's page tables. Under certain loads, this can result in an OOPS when the target address is in unpopulated vmap space. While we're at it, add comments to help explain what's going on. This isn't a great long-term fix. This code should probably be changed to use something like set_memory_ro. Signed-off-by:
Andy Lutomirski <luto@kernel.org> Cc: Andrew Cooper <andrew.cooper3@citrix.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: David Vrabel <dvrabel@cantab.net> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jan Beulich <jbeulich@suse.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: security@kernel.org <security@kernel.org> Cc: xen-devel <xen-devel@lists.xen.org> Link: http://lkml.kernel.org/r/0b0e55b995cda11e7829f140b833ef932fcabe3a.1438291540.git.luto@kernel.orgSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Lars-Peter Clausen authored
commit a798c24a upstream. Commit fdb6eb0a ("ASoC: dapm: Modify widget stream name according to prefix") fixed the case where a DAPM route between a DAI widget and a DAC/ADC/AIF widget with a matching stream name was not created when the DAPM context was using a prefix. Unfortunately the patch introduced a few issues on its own like leaking the dynamically allocated stream name memory and also not checking whether the allocation succeeded in the first place. It is also incomplete in that it still does not handle the case where stream name of the widget is a substring of the stream name of the DAI, which is explicitly allowed and works fine if no DAPM prefix is used. Revert the commit and take a slightly different approach to solving the issue. Instead of comparing the widget's stream name to the name of the DAI widget compare it to the stream name of the DAI widget. The stream name of the DAI widget is identical to the name of the DAI widget except that it wont have the DAPM prefix added. So this approach behaves identical regardless to whether the DAPM context uses a prefix or not. We don't have to worry about potentially matching with a widget with the same stream name, but from a different DAPM context with a different prefix, since the code already makes sure that both the DAI widget and the matched widget are from the same DAPM context. Fixes: fdb6eb0a ("ASoC: dapm: Modify widget stream name according to prefix") Signed-off-by:
Lars-Peter Clausen <lars@metafoo.de> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Lars-Peter Clausen authored
commit e50b1e06 upstream. The DAPM lock must be held when accessing the DAPM graph status through sysfs or debugfs, otherwise concurrent changes to the graph can result in undefined behaviour. Signed-off-by:
-
Axel Lin authored
commit fa8173a3 upstream. The de-emphasis sampling rate selection is controlled by BIT[3:4] of PCM1681_DEEMPH_CONTROL register. Do proper left shift to set it. Signed-off-by:
Axel Lin <axel.lin@ingics.com> Acked-by:
Marek Belisko <marek.belisko@streamunlimited.com> Signed-off-by:
-
Ben Zhang authored
commit a6c2a32a upstream. The regmap_write in ssm4567_set_dai_fmt accidentally clears the TDM_BCLKS field which was set earlier by ssm4567_set_tdm_slot. This patch fixes it by using regmap_update_bits with proper mask. Signed-off-by:
Ben Zhang <benzh@chromium.org> Acked-by:
Anatol Pomozov <anatol.pomozov@gmail.com> Signed-off-by:
-
Shilpa Sreeramalu authored
commit 412efa73 upstream. The usage_count variable was read before it was set to the correct value, due to which the firmware load was failing. Because of this IPC messages sent to the firmware were timing out causing a delay of about 1 second while playing audio from the internal speakers. With this patch the usage_count is read after the function call pm_runtime_get_sync which will increment the usage_count variable and the firmware load is successful and all the IPC messages are processed correctly. Signed-off-by:
Shilpa Sreeramalu <shilpa.sreeramalu@intel.com> Signed-off-by:
Fang, Yang A <yang.a.fang@intel.com> Signed-off-by:
-
Murali Karicheri authored
commit c1bfa985 upstream. All of the keystone devices have a separate register to hold post divider value for main pll clock. Currently the fixed-postdiv value used for k2hk/l/e SoCs works by sheer luck as u-boot happens to use a value of 2 for this. Now that we have fixed this in the pll clock driver change the dt bindings for the same. Signed-off-by:
Murali Karicheri <m-karicheri2@ti.com> Acked-by:
Santosh Shilimkar <ssantosh@kernel.org> Signed-off-by:
Olof Johansson <olof@lixom.net> Signed-off-by:
-
Murali Karicheri authored
commit 02fdfd70 upstream. Main PLL controller has post divider bits in a separate register in pll controller. Use the value from this register instead of fixed divider when available. Signed-off-by:
Michael Turquette <mturquette@baylibre.com> Signed-off-by:
-
David S. Miller authored
[ Upstream commit 44922150 ] If we have a series of events from userpsace, with %fprs=FPRS_FEF, like follows: ETRAP ETRAP VIS_ENTRY(fprs=0x4) VIS_EXIT RTRAP (kernel FPU restore with fpu_saved=0x4) RTRAP We will not restore the user registers that were clobbered by the FPU using kernel code in the inner-most trap. Traps allocate FPU save slots in the thread struct, and FPU using sequences save the "dirty" FPU registers only. This works at the initial trap level because all of the registers get recorded into the top-level FPU save area, and we'll return to userspace with the FPU disabled so that any FPU use by the user will take an FPU disabled trap wherein we'll load the registers back up properly. But this is not how trap returns from kernel to kernel operate. The simplest fix for this bug is to always save all FPU register state for anything other than the top-most FPU save area. Getting rid of the optimized inner-slot FPU saving code ends up making VISEntryHalf degenerate into plain VISEntry. Longer term we need to do something smarter to reinstate the partial save optimizations. Perhaps the fundament error is having trap entry and exit allocate FPU save slots and restore register state. Instead, the VISEntry et al. calls should be doing that work. This bug is about two decades old. Reported-by:
James Y Knight <jyknight@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Herbert Xu authored
commit 030f4e96 upstream. This patch fixes a host of reentrancy bugs in the nx driver. The following algorithms are affected: * CCM * GCM * CTR * XCBC * SHA256 * SHA512 The crypto API allows a single transform to be used by multiple threads simultaneously. For example, IPsec will use a single tfm to process packets for a given SA. As packets may arrive on multiple CPUs that tfm must be reentrant. The nx driver does try to deal with this by using a spin lock. Unfortunately only the basic AES/CBC/ECB algorithms do this in the correct way. The symptom of these bugs may range from the generation of incorrect output to memory corruption. Signed-off-by:
-
Leonidas Da Silva Barbosa authored
commit 10d87b73 upstream. Bug happens when a data size less than SHA block size is passed. Since first attempt will be saved in buffer, second round attempt get into two step to calculate op.inlen and op.outlen. The issue resides in this step. A wrong value of op.inlen and outlen was being calculated. This patch fix this eliminate the nx_sha_build_sg_list, that is useless in SHA's algorithm context. Instead we call nx_build_sg_list directly and pass a previous calculated max_sg_len to it. Signed-off-by:
Leonidas S. Barbosa <leosilva@linux.vnet.ibm.com> Signed-off-by:
-
Leonidas Da Silva Barbosa authored
commit c3365ce1 upstream. In NX we need to pass always a 16 multiple size nx_sg_list to co processor. Trim function handle with this assuring all nx_sg_lists are 16 multiple size, although data was not being considerated when crop was done. It was causing an unalignment between size of the list and data, corrupting csbcpb fields returning a -23 H_ST_PARM error, or invalid operation. This patch fix this recalculating how much data should be put back in to_process variable what assures the size of sg_list will be correct with size of the data. Signed-off-by:
-
Cyrille Pitchen authored
commit 1c8a38b1 upstream. This patch adds the missing update of the transfer data width in at_xdmac_prep_slave_sg(). Indeed, for each item in the scatter-gather list, we check whether the transfer length is aligned with the data width provided by dmaengine_slave_config(). If so, we directly use this data width for the current part of the transfer we are preparing. Otherwise, the data width is reduced to 8 bits (1 byte). Of course, the actual number of register accesses must also be updated to match the new data width. So one chunk was missing in the original patch (see Fixes tag below): the number of register accesses was correctly set to (len >> fixed_dwidth) in mbr_ubc but the real data width was not updated in mbr_cfg. Since mbr_cfg may change for each part of the scatter-gather transfer this also explains why the original patch used the Descriptor View 2 instead of the Descriptor View 1. Let's take the example of a DMA transfer to write 8bit data into an Atmel USART with FIFOs. When FIFOs are enabled in the USART, its Transmit Holding Register (THR) works in multidata mode, that is to say that up to 4 8bit data can be written into the THR in a single 32bit access and it is still possible to write only one data with a 8bit access. To take advantage of this new feature, the DMA driver was modified to allow multiple dwidths when doing slave transfers. For instance, when the total length is 22 bytes, the USART driver splits the transfer into 2 parts: First part: 20 bytes transferred through 5 32bit writes into THR Second part: 2 bytes transferred though 2 8bit writes into THR For the second part, the data width was first set to 4_BYTES by the USART driver thanks to dmaengine_slave_config() then at_xdmac_prep_slave_sg() reduces this data width to 1_BYTE because the 2 byte length is not aligned with the original 4_BYTES data width. Since the data width is modified, the actual number of writes into THR must be set accordingly. Signed-off-by:
Cyrille Pitchen <cyrille.pitchen@atmel.com> Fixes: 6d3a7d9e ("dmaengine: at_xdmac: allow muliple dwidths when doing slave transfers") Cc: stable@vger.kernel.org #4.0 and later Acked-by:
Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by:
Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by:
Vinod Koul <vinod.koul@intel.com> Signed-off-by:
-
Andy Lutomirski authored
commit 810bc075 upstream. We have a tricky bug in the nested NMI code: if we see RSP pointing to the NMI stack on NMI entry from kernel mode, we assume that we are executing a nested NMI. This isn't quite true. A malicious userspace program can point RSP at the NMI stack, issue SYSCALL, and arrange for an NMI to happen while RSP is still pointing at the NMI stack. Fix it with a sneaky trick. Set DF in the region of code that the RSP check is intended to detect. IRET will clear DF atomically. ( Note: other than paravirt, there's little need for all this complexity. We could check RIP instead of RSP. ) Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Cc: Borislav Petkov <bp@suse.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Signed-off-by:
-
Andy Lutomirski authored
commit a27507ca upstream. Check the repeat_nmi .. end_repeat_nmi special case first. The next patch will rework the RSP check and, as a side effect, the RSP check will no longer detect repeat_nmi .. end_repeat_nmi, so we'll need this ordering of the checks. Note: this is more subtle than it appears. The check for repeat_nmi .. end_repeat_nmi jumps straight out of the NMI code instead of adjusting the "iret" frame to force a repeat. This is necessary, because the code between repeat_nmi and end_repeat_nmi sets "NMI executing" and then writes to the "iret" frame itself. If a nested NMI comes in and modifies the "iret" frame while repeat_nmi is also modifying it, we'll end up with garbage. The old code got this right, as does the new code, but the new code is a bit more explicit. If we were to move the check right after the "NMI executing" check, then we'd get it wrong and have random crashes. ( Because the "NMI executing" check would jump to the code that would modify the "iret" frame without checking if the interrupted NMI was currently modifying it. ) Signed-off-by:
-
Andy Lutomirski authored
commit 0b22930e upstream. I found the nested NMI documentation to be difficult to follow. Improve the comments. Signed-off-by:
-
Andy Lutomirski authored
commit 9b6e6a83 upstream. Returning to userspace is tricky: IRET can fail, and ESPFIX can rearrange the stack prior to IRET. The NMI nesting fixup relies on a precise stack layout and atomic IRET. Rather than trying to teach the NMI nesting fixup to handle ESPFIX and failed IRET, punt: run NMIs that came from user mode on the normal kernel stack. This will make some nested NMIs visible to C code, but the C code is okay with that. As a side effect, this should speed up perf: it eliminates an RDMSR when NMIs come from user mode. Signed-off-by:
Borislav Petkov <bp@suse.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Signed-off-by:
-
Andy Lutomirski authored
commit 0e181bb5 upstream. Now that do_nmi saves CR2, we don't need to save it in asm. Signed-off-by:
-
Andy Lutomirski authored
commit 9d050416 upstream. 32-bit kernels handle nested NMIs in C. Enable the exact same handling on 64-bit kernels as well. This isn't currently necessary, but it will become necessary once the asm code starts allowing limited nesting. Signed-off-by:
-
Andy Lutomirski authored
commit 5ca6f70f upstream. INTERRUPT_RETURN turns into a jmp instruction. There's no need for extra indirection. Signed-off-by:
-
Michal Kazior authored
commit 11a002ef upstream. During initialization firmware does some sort of memory switch between DRAM and IRAM. If configuration value for bank switching isn't correct device crashes during init. The new value prevents firmware 11.0.0.302 (and possibly others) for qca61x4 hw2.1 from crashing during init. Signed-off-by:
Michal Kazior <michal.kazior@tieto.com> Signed-off-by:
Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by:
-
Benjamin Randazzo authored
commit b6878d9e upstream. In drivers/md/md.c get_bitmap_file() uses kmalloc() for creating a mdu_bitmap_file_t called "file". 5769 file = kmalloc(sizeof(*file), GFP_NOIO); 5770 if (!file) 5771 return -ENOMEM; This structure is copied to user space at the end of the function. 5786 if (err == 0 && 5787 copy_to_user(arg, file, sizeof(*file))) 5788 err = -EFAULT But if bitmap is disabled only the first byte of "file" is initialized with zero, so it's possible to read some bytes (up to 4095) of kernel space memory from user space. This is an information leak. 5775 /* bitmap disabled, zero the first byte and copy out */ 5776 if (!mddev->bitmap_info.file) 5777 file->pathname[0] = '\0'; Signed-off-by:
Benjamin Randazzo <benjamin@randazzo.fr> Signed-off-by:
NeilBrown <neilb@suse.com> Signed-off-by:
-
NeilBrown authored
commit 56301df6 upstream. A construct like: if (pm_runtime_suspended(twl->dev)) pm_runtime_get_sync(twl->dev); is against the spirit of the runtime_pm interface as it makes the internal refcounting useless. In this case it is also racy, particularly as 'put_autosuspend' is used to drop a reference. When that happens a timer is started and the device is runtime-suspended after the timeout. If the above code runs in this window, the device will not be found to be suspended so no pm_runtime reference is taken. When the timer expires the device will be suspended, which is against the intention of the code. So be more direct is taking and dropping references. If twl->linkstat is VBUS_VALID or ID_GROUND, then hold a pm_runtime reference, otherwise don't. Define "cable_present()" to test for this condition. Tested-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
NeilBrown <neilb@suse.de> Signed-off-by:
Kishon Vijay Abraham I <kishon@ti.com> Cc: Alexander Holler <holler@ahsoftware.de> Signed-off-by:
-
Peter Chen authored
commit 2f01a33b upstream. The ehci_init_driver is used to initialize hcd APIs for each ehci controller driver, it is designed to be called only one time and before driver register is called. The current design will cause ehci_init_driver is called multiple times at probe process, it will cause hc_driver's initialization affect current running hcd. We run out NULL pointer dereference problem when one hcd is started by module_init, and the other is started by otg thread at SMP platform. The reason for this problem is ehci_init_driver will do memory copy for current uniform hc_driver, and this memory copy will do memset (as 0) first, so when the first hcd is running usb_add_hcd, and the second hcd may clear the uniform hc_driver's space (at ehci_init_driver), then the first hcd will meet NULL pointer at the same time. See below two logs: LOG_1: ci_hdrc ci_hdrc.0: EHCI Host Controller ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1 ci_hdrc ci_hdrc.1: doesn't support gadget Unable to handle kernel NULL pointer dereference at virtual address 00000014 pgd = 80004000 [00000014] *pgd=00000000 Internal error: Oops: 805 [#1] PREEMPT SMP ARM Modules linked in: CPU: 0 PID: 108 Comm: kworker/u8:2 Not tainted 3.14.38-222193-g24b2734-dirty #25 Workqueue: ci_otg ci_otg_work task: d839ec00 ti: d8400000 task.ti: d8400000 PC is at ehci_run+0x4c/0x284 LR is at _raw_spin_unlock_irqrestore+0x28/0x54 pc : [<8041f9a0>] lr : [<8070ea84>] psr: 60000113 sp : d8401e30 ip : 00000000 fp : d8004400 r10: 00000001 r9 : 00000001 r8 : 00000000 r7 : 00000000 r6 : d8419940 r5 : 80dd24c0 r4 : d8419800 r3 : 8001d060 r2 : 00000000 r1 : 00000001 r0 : 00000000 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel Control: 10c53c7d Table: 1000404a DAC: 00000015 Process kworker/u8:2 (pid: 108, stack limit = 0xd8400238) Stack: (0xd8401e30 to 0xd8402000) 1e20: d87523c0 d8401e48 66667562 d8419800 1e40: 00000000 00000000 d8419800 00000000 00000000 00000000 d84198b0 8040fcdc 1e60: 00000000 80dd320c d8477610 d8419c00 d803d010 d8419800 00000000 00000000 1e80: d8004400 00000000 d8400008 80431494 80431374 d803d100 d803d010 d803d1ac 1ea0: 00000000 80432428 804323d4 d803d100 00000001 80435eb8 80e0d0bc d803d100 1ec0: 00000006 80436458 00000000 d803d100 80e92ec8 80436f44 d803d010 d803d100 1ee0: d83fde00 8043292c d8752710 d803d1f4 d803d010 8042ddfc 8042ddb8 d83f3b00 1f00: d803d1f4 80042b60 00000000 00000003 00000001 00000001 80054598 d83f3b00 1f20: d8004400 d83f3b18 d8004414 d8400000 80e3957b 00000089 d8004400 80043814 1f40: d839ec00 00000000 d83fcd80 d83f3b00 800436e4 00000000 00000000 00000000 1f60: 00000000 80048f34 00000000 00000000 00000000 d83f3b00 00000000 00000000 1f80: d8401f80 d8401f80 00000000 00000000 d8401f90 d8401f90 d8401fac d83fcd80 1fa0: 80048e68 00000000 00000000 8000e538 00000000 00000000 00000000 00000000 1fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 1fe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000 [<8041f9a0>] (ehci_run) from [<8040fcdc>] (usb_add_hcd+0x248/0x6e8) [<8040fcdc>] (usb_add_hcd) from [<80431494>] (host_start+0x120/0x2e4) [<80431494>] (host_start) from [<80432428>] (ci_otg_start_host+0x54/0xbc) [<80432428>] (ci_otg_start_host) from [<80435eb8>] (otg_set_protocol+0xa4/0xd0) [<80435eb8>] (otg_set_protocol) from [<80436458>] (otg_set_state+0x574/0xc58) [<80436458>] (otg_set_state) from [<80436f44>] (otg_statemachine+0x408/0x46c) [<80436f44>] (otg_statemachine) from [<8043292c>] (ci_otg_fsm_work+0x3c/0x190) [<8043292c>] (ci_otg_fsm_work) from [<8042ddfc>] (ci_otg_work+0x44/0x1c4) [<8042ddfc>] (ci_otg_work) from [<80042b60>] (process_one_work+0xf4/0x35c) [<80042b60>] (process_one_work) from [<80043814>] (worker_thread+0x130/0x3bc) [<80043814>] (worker_thread) from [<80048f34>] (kthread+0xcc/0xe4) [<80048f34>] (kthread) from [<8000e538>] (ret_from_fork+0x14/0x3c) Code: e5953018 e3530000 0a000000 e12fff33 (e5878014) LOG_2: ci_hdrc ci_hdrc.0: EHCI Host Controller ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1 ci_hdrc ci_hdrc.1: doesn't support gadget Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = 80004000 [00000000] *pgd=00000000 In Online 00:00ternal e Offline rror: Oops: 80000005 [#1] PREEMPT SMP ARM Modules linked in: CPU: 0 PID: 108 Comm: kworker/u8:2 Not tainted 3.14.38-02007-g24b2734-dirty #127 Workque Online 00:00ue: ci_o Offline tg ci_otg_work Online 00:00task: d8 Offline 39ec00 ti: d83ea000 task.ti: d83ea000 PC is at 0x0 LR is at usb_add_hcd+0x248/0x6e8 pc : [<00000000>] lr : [<8040f644>] psr: 60000113 sp : d83ebe60 ip : 00000000 fp : d8004400 r10: 00000001 r9 : 00000001 r8 : d85fd4b0 r7 : 00000000 r6 : 00000000 r5 : 00000000 r4 : d85fd400 r3 : 00000000 r2 : d85fd4f4 r1 : 80410178 r0 : d85fd400 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel Control: 10c53c7d Table: 1000404a DAC: 00000015 Process kworker/u8:2 (pid: 108, stack limit = 0xd83ea238) Stack: (0xd83ebe60 to 0xd83ec000) be60: 00000000 80dd920c d8654e10 d85fd800 d803e010 d85fd400 00000000 00000000 be80: d8004400 00000000 d83ea008 80430e34 80430d14 d803e100 d803e010 d803e1ac bea0: 00000000 80431dc8 80431d74 d803e100 00000001 80435858 80e130bc d803e100 bec0: 00000006 80435df8 00000000 d803e100 80e98ec8 804368e4 d803e010 d803e100 bee0: d86e8100 804322cc d86cf050 d803e1f4 d803e010 8042d79c 8042d758 d83cf900 bf00: d803e1f4 80042b78 00000000 00000003 00000001 00000001 800545e8 d83cf900 bf20: d8004400 d83cf918 d8004414 d83ea000 80e3f57b 00000089 d8004400 8004382c bf40: d839ec00 00000000 d8393780 d83cf900 800436fc 00000000 00000000 00000000 bf60: 00000000 80048f50 80e019f4 00000000 0000264c d83cf900 00000000 00000000 bf80: d83ebf80 d83ebf80 00000000 00000000 d83ebf90 d83ebf90 d83ebfac d8393780 bfa0: 80048e84 00000000 00000000 8000e538 00000000 00000000 00000000 00000000 bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 bfe0: 00000000 00000000 00000000 00000000 00000013 00000000 ee66e85d 133ebd03 [<804 Online 00:000f644>] Offline (usb_add_hcd) from [<80430e34>] (host_start+0x120/0x2e4) [<80430e34>] (host_start) from [<80431dc8>] (ci_otg_start_host+0x54/0xbc) [<80431dc8>] (ci_otg_start_host) from [<80435858>] (otg_set_protocol+0xa4/0xd0) [<80435858>] (otg_set_protocol) from [<80435df8>] (otg_set_state+0x574/0xc58) [<80435df8>] (otg_set_state) from [<804368e4>] (otg_statemachine+0x408/0x46c) [<804368e4>] (otg_statemachine) from [<804322cc>] (ci_otg_fsm_work+0x3c/0x190) [<804322cc>] (ci_otg_fsm_work) from [<8042d79c>] (ci_otg_work+0x44/0x1c4) [<8042d79c>] (ci_otg_work) from [<80042b78>] (process_one_work+0xf4/0x35c) [<80042b78>] (process_one_work) from [<8004382c>] (worker_thread+0x130/0x3bc) [<8004382c>] (worker_thread) from [<80048f50>] (kthread+0xcc/0xe4) [<80048f50>] (kthread) from [<8000e538>] (ret_from_fork+0x14/0x3c) Code: bad PC value Cc: Jun Li <jun.li@freescale.com> Cc: Alan Stern <stern@rowland.harvard.edu> Acked-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
Peter Chen <peter.chen@freescale.com> Signed-off-by:
-
Alan Stern authored
commit c93e64e9 upstream. This patch fixes a bug in the error pathway of usb_add_gadget_udc_release() in udc-core.c. If the udc registration fails, the gadget registration is not fully undone; there's a put_device(&gadget->dev) call but no device_del(). Acked-by:
Felipe Balbi <balbi@ti.com> Signed-off-by:
-
Dirk Behme authored
commit 74472233 upstream. Add support for the Sierra Wireless AR8550 device with USB descriptor 0x1199, 0x68AB. It is common with MC879x modules 1199:683c/683d which also are composite devices with 7 interfaces (0..6) and also MDM62xx based as the AR8550. The major difference are only the interface attributes 02/02/01 on interfaces 3 and 4 on the AR8550. They are vendor specific ff/ff/ff on MC879x modules. lsusb reports: Bus 001 Device 004: ID 1199:68ab Sierra Wireless, Inc. Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x1199 Sierra Wireless, Inc. idProduct 0x68ab bcdDevice 0.06 iManufacturer 3 Sierra Wireless, Incorporated iProduct 2 AR8550 iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 198 bNumInterfaces 7 bConfigurationValue 1 iConfiguration 1 Sierra Configuration bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 255 Vendor Specific Protocol iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 32 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 32 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 255 Vendor Specific Protocol iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 32 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 32 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 2 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 255 Vendor Specific Protocol iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 32 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x03 EP 3 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 32 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 3 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 2 Communications bInterfaceSubClass 2 Abstract (modem) bInterfaceProtocol 1 AT-commands (v.25ter) iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x84 EP 4 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 5 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x85 EP 5 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 32 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x04 EP 4 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 32 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 4 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 2 Communications bInterfaceSubClass 2 Abstract (modem) bInterfaceProtocol 1 AT-commands (v.25ter) iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x86 EP 6 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 5 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x87 EP 7 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 32 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x05 EP 5 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 32 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 5 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 255 Vendor Specific Protocol iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x88 EP 8 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 5 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x89 EP 9 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 32 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x06 EP 6 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 32 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 6 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 255 Vendor Specific Protocol iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x8a EP 10 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 5 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x8b EP 11 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 32 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x07 EP 7 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 32 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0001 Self Powered Signed-off-by:
Dirk Behme <dirk.behme@de.bosch.com> Cc: Lars Melin <larsm17@gmail.com> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Gavin Shan authored
commit ffe5adcb upstream. When xhci_mem_cleanup() is called, it's possible that the command timer isn't initialized and scheduled. For those cases, to delete the command timer causes soft-lockup as below stack dump shows. The patch avoids deleting the command timer if it's not scheduled with the help of timer_pending(). NMI watchdog: BUG: soft lockup - CPU#40 stuck for 23s! [kworker/40:1:8140] : NIP [c000000000150b30] lock_timer_base.isra.34+0x90/0xa0 LR [c000000000150c24] try_to_del_timer_sync+0x34/0xa0 Call Trace: [c000000f67c975e0] [c0000000015b84f8] mon_ops+0x0/0x8 (unreliable) [c000000f67c97620] [c000000000150c24] try_to_del_timer_sync+0x34/0xa0 [c000000f67c97660] [c000000000150cf0] del_timer_sync+0x60/0x80 [c000000f67c97690] [c00000000070ac0c] xhci_mem_cleanup+0x5c/0x5e0 [c000000f67c97740] [c00000000070c2e8] xhci_mem_init+0x1158/0x13b0 [c000000f67c97860] [c000000000700978] xhci_init+0x88/0x110 [c000000f67c978e0] [c000000000701644] xhci_gen_setup+0x2b4/0x590 [c000000f67c97970] [c0000000006d4410] xhci_pci_setup+0x40/0x190 [c000000f67c979f0] [c0000000006b1af8] usb_add_hcd+0x418/0xba0 [c000000f67c97ab0] [c0000000006cb15c] usb_hcd_pci_probe+0x1dc/0x5c0 [c000000f67c97b50] [c0000000006d3ba4] xhci_pci_probe+0x64/0x1f0 [c000000f67c97ba0] [c0000000004fe9ac] local_pci_probe+0x6c/0x130 [c000000f67c97c30] [c0000000000e5ce8] work_for_cpu_fn+0x38/0x60 [c000000f67c97c60] [c0000000000eacb8] process_one_work+0x198/0x470 [c000000f67c97cf0] [c0000000000eb6ac] worker_thread+0x37c/0x5a0 [c000000f67c97d80] [c0000000000f2730] kthread+0x110/0x130 [c000000f67c97e30] [c000000000009660] ret_from_kernel_thread+0x5c/0x7c Reported-by:
Priya M. A <priyama2@in.ibm.com> Signed-off-by:
Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
-
Mathias Nyman authored
commit 7895086a upstream. We need to check that a TRB is part of the current segment before calculating its DMA address. Previously a ring segment didn't use a full memory page, and every new ring segment got a new memory page, so the off by one error in checking the upper bound was never seen. Now that we use a full memory page, 256 TRBs (4096 bytes), the off by one didn't catch the case when a TRB was the first element of the next segment. This is triggered if the virtual memory pages for a ring segment are next to each in increasing order where the ring buffer wraps around and causes errors like: [ 106.398223] xhci_hcd 0000:00:14.0: ERROR Transfer event TRB DMA ptr not part of current TD ep_index 0 comp_code 1 [ 106.398230] xhci_hcd 0000:00:14.0: Looking for event-dma fffd3000 trb-start fffd4fd0 trb-end fffd5000 seg-start fffd4000 seg-end fffd4ff0 The trb-end address is one outside the end-seg address. Tested-by:
Arkadiusz Miśkiewicz <arekm@maven.pl> Signed-off-by:
-
Krzysztof Kozlowski authored
commit 5dd90e5b upstream. When pl330 driver was used during sound playback, after some time or after a number of plays the sound became choppy or totally noisy. For example on Odroid XU3 board the first four executions of aplay with small WAVE worked fine, but fifth was unrecognizable with errors: $ aplay /usr/share/sounds/alsa/Front_Right.wava underrun!!! (at least 0.095 ms long) Issue was caused by wrong residue reported by pl330 driver to pcm_dmaengine for its cyclic dma transfers. The pl330_tx_status(), residue reporting function, used a "last" flag in a descriptor to indicate that there is no more data to send. The pl330_tx_submit() iterated over descriptors trying to remove this flag from them and then mark last descriptor as "last". However when iterating it actually removed the flag not from descriptors but always from last of it (and then reset it). Thus effectively once some descriptor was marked as last, then it stayed like this forever causing residue to be reported too low. Signed-off-by:
Krzysztof Kozlowski <k.kozlowski.k@gmail.com> Fixes: aee4d1fa ("dmaengine: pl330: improve pl330_tx_status() function") Reported-by: gabriel@unseen.is Suggested-by:
Marek Szyprowski <m.szyprowski@samsung.com> Tested-by:
-
Krzysztof Kozlowski authored
commit ae128293 upstream. During memcpy operations the residue was always set to an u32 overflowed value. In pl330_tx_status() function number of currently transferred bytes was subtracted from internal "bytes_requested" field. However this "bytes_requested" was not initialized at start to length of memcpy buffer so transferred bytes were subtracted from 0 causing overflow. Signed-off-by:
Krzysztof Kozlowski <k.kozlowski@samsung.com> Fixes: aee4d1fa ("dmaengine: pl330: improve pl330_tx_status() function") Signed-off-by:
-
Johan Hedberg authored
commit 25ba2653 upstream. The l2cap_conn->smp pointer may be NULL for various valid reasons where SMP has failed to initialize properly. One such scenario is when crypto support is missing, another when the adapter has been powered on through a legacy method. The smp_conn_security() function should have the appropriate check for this situation to avoid NULL pointer dereferences. Signed-off-by:
Johan Hedberg <johan.hedberg@intel.com> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
-
Brian King authored
commit 3f1c0581 upstream. Fixes another signed / unsigned array indexing bug in the ipr driver. Currently, when hrrq_index wraps, it becomes a negative number. We do the modulo, but still have a negative number, so we end up indexing backwards in the array. Given where the hrrq array is located in memory, we probably won't actually reference memory we don't own, but nonetheless ipr is still looking at data within struct ipr_ioa_cfg and interpreting it as struct ipr_hrr_queue data, so bad things could certainly happen. Each ipr adapter has anywhere from 1 to 16 HRRQs. By default, we use 2 on new adapters. Let's take an example: Assume ioa_cfg->hrrq_index=0x7fffffffe and ioa_cfg->hrrq_num=4: The atomic_add_return will then return -1. We mod this with 3 and get -2, add one and get -1 for an array index. On adapters which support more than a single HRRQ, we dedicate HRRQ to adapter initialization and error interrupts so that we can optimize the other queues for fast path I/O. So all normal I/O uses HRRQ 1-15. So we want to spread the I/O requests across those HRRQs. With the default module parameter settings, this bug won't hit, only when someone sets the ipr.number_of_msix parameter to a value larger than 3 is when bad things start to happen. Tested-by:
Wen Xiong <wenxiong@linux.vnet.ibm.com> Reviewed-by:
Gabriel Krisman Bertazi <krisman@linux.vnet.ibm.com> Signed-off-by:
Brian King <brking@linux.vnet.ibm.com> Reviewed-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
James Bottomley <JBottomley@Odin.com> Signed-off-by:
-
