Currently a packet is marked for loopback only if the source and
destination addresses equals. This is not enough when multiple gids are
present in rxe device's gid table and the traffic is from one gid to
another. Fix it by marking the packet for loopback if the destination MAC
address is equal to the source MAC address.
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Tested-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Move the function rxe_init_av() to rxe_av.c file and use it instead of
calling rxe_av_from_attr() and rxe_av_fill_ip_info(), also remove the
unused rxe_dev parameter from rxe_init_av().
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Reviewed-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Fixes the following sparse warnings:

drivers/infiniband/hw/hns/hns_roce_hw_v2.c:5822:5: warning:
 symbol 'hns_roce_v2_query_srq' was not declared. Should it be static?
drivers/infiniband/hw/hns/hns_roce_srq.c:158:6: warning:
 symbol 'hns_roce_srq_free' was not declared. Should it be static?
drivers/infiniband/hw/hns/hns_roce_srq.c:81:5: warning:
 symbol 'hns_roce_srq_alloc' was not declared. Should it be static?
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Linux 5.0-rc5

Needed to merge the include/uapi changes so we have an up to date
single-tree for these files. Patches already posted are also expected to
need this for dependencies.

Keeping single line wrapper functions is not useful. Hence remove the
ib_sg_dma_address() and ib_sg_dma_len() functions. This patch does not
change any functionality.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Query all per transport caps for XRC and set the appropriate bits in the
per transport field of the advertised struct.
Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

ODP support in SRQ is per transport capability. Based on device
capabilities set this flag in device structure for future queries.
Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Add changes to the WQE page-fault handler to

1. Identify that the event is for a SRQ WQE
2. Pass SRQ object instead of a QP to the function that reads the WQE
3. Parse the SRQ WQE with respect to its structure

The rest is handled as for regular RQ WQE.
Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Reading a WQE from SRQ is almost identical to reading from regular RQ.
The differences are the size of the queue, the size of a WQE and buffer
location.

Make necessary changes to mlx5_ib_read_user_wqe() to let it read a WQE
from a SRQ or RQ by caller choice.
Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Skip XRC segment in the beginning of a send WQE and fetch ODP XRC
capabilities when QP type is IB_QPT_XRC_INI. The rest of the handling is
the same as in RC QP.
Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

In the function mlx5_ib_mr_responder_pfault_handler()

1. The parameter wqe is used as read-only so there is no need to pass it
   by reference.
2. Remove the unused argument pfault from list of arguments.
Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

When handling an ODP event for a receive WQE in SRQ the target QP is
unknown. Therefore, it is wrong to ask if QP has a SRQ in the page-fault
handler.
Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Expose XRC ODP capabilities as part of the extended device capabilities.
Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

The ODP support matrix is per operation and per transport. The support for
each transport (RC, UD, etc.) is described with a bit field.

ODP for SRQ WQEs is considered a different kind of support from ODP for RQ
WQs and therefore needs a different capability bit.
Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

QP and SRQ objects are stored in different containers so the action to get
and lock a common resource during ODP event needs to address that.

While here get rid of 'refcount' and 'free' fields in mlx5_core_srq struct
and use the fields with same semantics in common structure.

Fixes: 032080ab ("IB/mlx5: Lock QP during page fault handling")
Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

From
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux

For dependencies needed in the next ODP patches.

* branch 'mlx5-next':
  net/mlx5: Set ODP SRQ support in firmware
  net/mlx5: Add XRC transport to ODP device capabilities layout

Pull x86 fixes from Thomas Gleixner:
 "A few updates for x86:

   - Fix an unintended sign extension issue in the fault handling code

   - Rename the new resource control config switch so it's less
     confusing

   - Avoid setting up EFI info in kexec when the EFI runtime is
     disabled.

   - Fix the microcode version check in the AMD microcode loader so it
     only loads higher version numbers and never downgrades

   - Set EFER.LME in the 32bit trampoline before returning to long mode
     to handle older AMD/KVM behaviour properly.

   - Add Darren and Andy as x86/platform reviewers"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/resctrl: Avoid confusion over the new X86_RESCTRL config
  x86/kexec: Don't setup EFI info if EFI runtime is not enabled
  x86/microcode/amd: Don't falsely trick the late loading mechanism
  MAINTAINERS: Add Andy and Darren as arch/x86/platform/ reviewers
  x86/fault: Fix sign-extend unintended sign extension
  x86/boot/compressed/64: Set EFER.LME=1 in 32-bit trampoline before returning to long mode
  x86/cpu: Add Atom Tremont (Jacobsville)

Pull cpu hotplug fixes from Thomas Gleixner:
 "Two fixes for the cpu hotplug machinery:

   - Replace the overly clever 'SMT disabled by BIOS' detection logic as
     it breaks KVM scenarios and prevents speculation control updates
     when the Hyperthreads are brought online late after boot.

   - Remove a redundant invocation of the speculation control update
     function"

* 'smp-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  cpu/hotplug: Fix "SMT disabled by BIOS" detection for KVM
  x86/speculation: Remove redundant arch_smt_update() invocation

Pull perf fixes from Thomas Gleixner:
 "A pile of perf updates:

   - Fix broken sanity check in the /proc/sys/kernel/perf_cpu_time_max_percent
     write handler

   - Cure a perf script crash which caused by an unitinialized data
     structure

   - Highlight the hottest instruction in perf top and not a random one

   - Cure yet another clang issue when building perf python

   - Handle topology entries with no CPU correctly in the tools

   - Handle perf data which contains both tracepoints and performance
     counter entries correctly.

   - Add a missing NULL pointer check in perf ordered_events_free()"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf script: Fix crash when processing recorded stat data
  perf top: Fix wrong hottest instruction highlighted
  perf tools: Handle TOPOLOGY headers with no CPU
  perf python: Remove -fstack-clash-protection when building with some clang versions
  perf core: Fix perf_proc_update_handler() bug
  perf script: Fix crash with printing mixed trace point and other events
  perf ordered_events: Fix crash in ordered_events__free

Pull EFI fix from Thomas Gleixner:
 "The dump info for the efi page table debugging lacks a terminator
  which causes the kernel to crash when the debugfile is read"

* 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  efi/arm64: Fix debugfs crash by adding a terminator for ptdump marker

Pull btrfs fixes from David Sterba:

 - regression fix: transaction commit can run away due to delayed ref
   waiting heuristic, this is not necessary now because of the proper
   reservation mechanism introduced in 5.0

 - regression fix: potential crash due to use-before-check of an ERR_PTR
   return value

 - fix for transaction abort during transaction commit that needs to
   properly clean up pending block groups

 - fix deadlock during b-tree node/leaf splitting, when this happens on
   some of the fundamental trees, we must prevent new tree block
   allocation to re-enter indirectly via the block group flushing path

 - potential memory leak after errors during mount

* tag 'for-5.0-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: On error always free subvol_name in btrfs_mount
  btrfs: clean up pending block groups when transaction commit aborts
  btrfs: fix potential oops in device_list_add
  btrfs: don't end the transaction for delayed refs in throttle
  Btrfs: fix deadlock when allocating tree block during leaf/node split

To avoid compatibility issue with older kernels the firmware doesn't
allow SRQ to work with ODP unless kernel asks for it.
Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>

The device capabilities for ODP structure was missing the field for XRC
transport so add it here.
Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>

Pull Devicetree fix from Rob Herring:
 "A single fix for building DT bindings in-tree"

* tag 'devicetree-fixes-for-5.0-3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  dt-bindings: Fix dt_binding_check target for in tree builds

Merge tag 'riscv-for-linus-5.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux

Pull RISC-V fixes from Palmer Dabbelt:
 "This contains a handful of mostly-independent patches:

   - make our port respect TIF_NEED_RESCHED, which fixes
     CONFIG_PREEMPT=y kernels

   - fix double-put of OF nodes

   - fix a misspelling of target in our Kconfig

   - generic PCIe is enabled in our defconfig

   - fix our SBI early console to properly handle line
     endings

   - fix max_low_pfn being counted in PFNs

   - a change to TASK_UNMAPPED_BASE to match what other
     arches do

  This has passed my standard 'boot Fedora' flow"

* tag 'riscv-for-linus-5.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux:
  riscv: Adjust mmap base address at a third of task size
  riscv: fixup max_low_pfn with PFN_DOWN.
  tty/serial: use uart_console_write in the RISC-V SBL early console
  RISC-V: defconfig: Add CRYPTO_DEV_VIRTIO=y
  RISC-V: defconfig: Enable Generic PCIE by default
  RISC-V: defconfig: Move CONFIG_PCI{,E_XILINX}
  RISC-V: Kconfig: fix spelling mistake "traget" -> "target"
  RISC-V: asm/page.h: fix spelling mistake "CONFIG_64BITS" -> "CONFIG_64BIT"
  RISC-V: fix bad use of of_node_put
  RISC-V: Add _TIF_NEED_RESCHED check for kernel thread when CONFIG_PREEMPT=y

Pull block fixes from Jens Axboe:
 "A few fixes that should go into this release. This contains:

   - MD pull request from Song, fixing a recovery OOM issue (Alexei)

   - Fix for a sync related stall (Jianchao)

   - Dummy callback for timeouts (Tetsuo)

   - IDE atapi sense ordering fix (me)"

* tag 'for-linus-20190202' of git://git.kernel.dk/linux-block:
  ide: ensure atapi sense request aren't preempted
  blk-mq: fix a hung issue when fsync
  block: pass no-op callback to INIT_WORK().
  md/raid5: fix 'out of memory' during raid cache recovery

Pull SCSI fixes from James Bottomley:
 "Five minor bug fixes.

  The libfc one is a tiny memory leak, the zfcp one is an incorrect user
  visible parameter and the rest are on error legs or obscure features"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: 53c700: pass correct "dev" to dma_alloc_attrs()
  scsi: bnx2fc: Fix error handling in probe()
  scsi: scsi_debug: fix write_same with virtual_gb problem
  scsi: libfc: free skb when receiving invalid flogi resp
  scsi: zfcp: fix sysfs block queue limit output for max_segment_size

Merge misc fixes from Andrew Morton:
 "24 fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (24 commits)
  autofs: fix error return in autofs_fill_super()
  autofs: drop dentry reference only when it is never used
  fs/drop_caches.c: avoid softlockups in drop_pagecache_sb()
  mm: migrate: don't rely on __PageMovable() of newpage after unlocking it
  psi: clarify the Kconfig text for the default-disable option
  mm, memory_hotplug: __offline_pages fix wrong locking
  mm: hwpoison: use do_send_sig_info() instead of force_sig()
  kasan: mark file common so ftrace doesn't trace it
  init/Kconfig: fix grammar by moving a closing parenthesis
  lib/test_kmod.c: potential double free in error handling
  mm, oom: fix use-after-free in oom_kill_process
  mm/hotplug: invalid PFNs from pfn_to_online_page()
  mm,memory_hotplug: fix scan_movable_pages() for gigantic hugepages
  psi: fix aggregation idle shut-off
  mm, memory_hotplug: test_pages_in_a_zone do not pass the end of zone
  mm, memory_hotplug: is_mem_section_removable do not pass the end of a zone
  oom, oom_reaper: do not enqueue same task twice
  mm: migrate: make buffer_migrate_page_norefs() actually succeed
  kernel/exit.c: release ptraced tasks before zap_pid_ns_processes
  x86_64: increase stack size for KASAN_EXTRA
  ...

When reading 'efi_page_tables' debugfs triggers an out-of-bounds access here:

  arch/arm64/mm/dump.c: 282
  if (addr >= st->marker[1].start_address) {

called from:

  arch/arm64/mm/dump.c: 331
  note_page(st, addr, 2, pud_val(pud));

because st->marker++ is is called after "UEFI runtime end" which is the
last element in addr_marker[]. Therefore, add a terminator like the one
for kernel_page_tables, so it can be skipped to print out non-existent
markers.

Here's the KASAN bug report:

  # cat /sys/kernel/debug/efi_page_tables
  ---[ UEFI runtime start ]---
  0x0000000020000000-0x0000000020010000          64K PTE       RW NX SHD AF ...
  0x0000000020200000-0x0000000021340000       17664K PTE       RW NX SHD AF ...
  ...
  0x0000000021920000-0x0000000021950000         192K PTE       RW x  SHD AF ...
  0x0000000021950000-0x00000000219a0000         320K PTE       RW NX SHD AF ...
  ---[ UEFI runtime end ]---
  ---[ (null) ]---
  ---[ (null) ]---

   BUG: KASAN: global-out-of-bounds in note_page+0x1f0/0xac0
   Read of size 8 at addr ffff2000123f2ac0 by task read_all/42464
   Call trace:
    dump_backtrace+0x0/0x298
    show_stack+0x24/0x30
    dump_stack+0xb0/0xdc
    print_address_description+0x64/0x2b0
    kasan_report+0x150/0x1a4
    __asan_report_load8_noabort+0x30/0x3c
    note_page+0x1f0/0xac0
    walk_pgd+0xb4/0x244
    ptdump_walk_pgd+0xec/0x140
    ptdump_show+0x40/0x50
    seq_read+0x3f8/0xad0
    full_proxy_read+0x9c/0xc0
    __vfs_read+0xfc/0x4c8
    vfs_read+0xec/0x208
    ksys_read+0xd0/0x15c
    __arm64_sys_read+0x84/0x94
    el0_svc_handler+0x258/0x304
    el0_svc+0x8/0xc

  The buggy address belongs to the variable:
   __compound_literal.0+0x20/0x800

  Memory state around the buggy address:
   ffff2000123f2980: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
   ffff2000123f2a00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 fa
  >ffff2000123f2a80: fa fa fa fa 00 00 00 00 fa fa fa fa 00 00 00 00
                                            ^
   ffff2000123f2b00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
   ffff2000123f2b80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0

[ ardb: fix up whitespace ]
[ mingo: fix up some moar ]
Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Fixes: 9d80448a ("efi/arm64: Add debugfs node to dump UEFI runtime page tables")
Link: http://lkml.kernel.org/r/20190202095017.13799-2-ard.biesheuvel@linaro.orgSigned-off-by: Ingo Molnar <mingo@kernel.org>

"Resource Control" is a very broad term for this CPU feature, and a term
that is also associated with containers, cgroups etc. This can easily
cause confusion.

Make the user prompt more specific. Match the config symbol name.

 [ bp: In the future, the corresponding ARM arch-specific code will be
   under ARM_CPU_RESCTRL and the arch-agnostic bits will be carved out
   under the CPU_RESCTRL umbrella symbol. ]
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Babu Moger <Babu.Moger@amd.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Morse <james.morse@arm.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: linux-doc@vger.kernel.org
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Pu Wen <puwen@hygon.cn>
Cc: Reinette Chatre <reinette.chatre@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/20190130195621.GA30653@cmpxchg.org

Pull xtensa fixes from Max Filippov:

 - fix ccount_timer_shutdown for secondary CPUs

 - fix secondary CPU initialization

 - fix secondary CPU reset vector clash with double exception vector

 - fix present CPUs when booting with 'maxcpus' parameter

 - limit possible CPUs by configured NR_CPUS

 - issue a warning if xtensa PIC is asked to retrigger anything other
   than software IRQ

 - fix masking/unmasking of the first two IRQs on xtensa MX PIC

 - fix typo in Kconfig description for user space unaligned access
   feature

 - fix Kconfig warning for selecting BUILTIN_DTB

* tag 'xtensa-20190201' of git://github.com/jcmvbkbc/linux-xtensa:
  xtensa: SMP: limit number of possible CPUs by NR_CPUS
  xtensa: rename BUILTIN_DTB to BUILTIN_DTB_SOURCE
  xtensa: Fix typo use space=>user space
  drivers/irqchip: xtensa-mx: fix mask and unmask
  drivers/irqchip: xtensa: add warning to irq_retrigger
  xtensa: SMP: mark each possible CPU as present
  xtensa: smp_lx200_defconfig: fix vectors clash
  xtensa: SMP: fix secondary CPU initialization
  xtensa: SMP: fix ccount_timer_shutdown

Pull arm64 fixes from Will Deacon:
 "Although we're still debugging a few minor arm64-specific issues in
  mainline, I didn't want to hold this lot up in the meantime.

  We've got an additional KASLR fix after the previous one wasn't quite
  complete, a fix for a performance regression when mapping executable
  pages into userspace and some fixes for kprobe blacklisting. All
  candidates for stable.

  Summary:

   - Fix module loading when KASLR is configured but disabled at runtime

   - Fix accidental IPI when mapping user executable pages

   - Ensure hyp-stub and KVM world switch code cannot be kprobed"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: hibernate: Clean the __hyp_text to PoC after resume
  arm64: hyp-stub: Forbid kprobing of the hyp-stub
  arm64: kprobe: Always blacklist the KVM world-switch code
  arm64: kaslr: ensure randomized quantities are clean also when kaslr is off
  arm64: Do not issue IPIs for user executable ptes

Pull smb3 fixes from Steve French:
 "SMB3 fixes, some from this week's SMB3 test evemt, 5 for stable and a
  particularly important one for queryxattr (see xfstests 70 and 117)"

* tag '5.0-rc4-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: update internal module version number
  CIFS: fix use-after-free of the lease keys
  CIFS: Do not consider -ENODATA as stat failure for reads
  CIFS: Do not count -ENODATA as failure for query directory
  CIFS: Fix trace command logging for SMB2 reads and writes
  CIFS: Fix possible oops and memory leaks in async IO
  cifs: limit amount of data we request for xattrs to CIFSMaxBufSize
  cifs: fix computation for MAX_SMB2_HDR_SIZE

Merge tag 'apparmor-pr-2019-02-01' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor

Pull apparmor bug fixes from John Johansen:
 "Two bug fixes for apparmor:

   - Fix aa_label_build() error handling for failed merges

   - Fix warning about unused function apparmor_ipv6_postroute"

* tag 'apparmor-pr-2019-02-01' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor:
  apparmor: Fix aa_label_build() error handling for failed merges
  apparmor: Fix warning about unused function apparmor_ipv6_postroute

In autofs_fill_super() on error of get inode/make root dentry the return
should be ENOMEM as this is the only failure case of the called
functions.

Link: http://lkml.kernel.org/r/154725123240.11260.796773942606871359.stgit@pluto-themaw-netSigned-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

autofs_expire_run() calls dput(dentry) to drop the reference count of
dentry.  However, dentry is read via autofs_dentry_ino(dentry) after
that.  This may result in a use-free-bug.  The patch drops the reference
count of dentry only when it is never used.

Link: http://lkml.kernel.org/r/154725122396.11260.16053424107144453867.stgit@pluto-themaw-netSigned-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

When superblock has lots of inodes without any pagecache (like is the
case for /proc), drop_pagecache_sb() will iterate through all of them
without dropping sb->s_inode_list_lock which can lead to softlockups
(one of our customers hit this).

Fix the problem by going to the slow path and doing cond_resched() in
case the process needs rescheduling.

Link: http://lkml.kernel.org/r/20190114085343.15011-1-jack@suse.czSigned-off-by: Jan Kara <jack@suse.cz>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

We had a race in the old balloon compaction code before b1123ea6
("mm: balloon: use general non-lru movable page feature") refactored it
that became visible after backporting 195a8c43 ("virtio-balloon:
deflate via a page list") without the refactoring.

The bug existed from commit d6d86c0a ("mm/balloon_compaction:
redesign ballooned pages management") till b1123ea6 ("mm: balloon:
use general non-lru movable page feature").  d6d86c0a
("mm/balloon_compaction: redesign ballooned pages management") was
backported to 3.12, so the broken kernels are stable kernels [3.12 -
4.7].

There was a subtle race between dropping the page lock of the newpage in
__unmap_and_move() and checking for __is_movable_balloon_page(newpage).

Just after dropping this page lock, virtio-balloon could go ahead and
deflate the newpage, effectively dequeueing it and clearing PageBalloon,
in turn making __is_movable_balloon_page(newpage) fail.

This resulted in dropping the reference of the newpage via
putback_lru_page(newpage) instead of put_page(newpage), leading to
page->lru getting modified and a !LRU page ending up in the LRU lists.
With 195a8c43 ("virtio-balloon: deflate via a page list")
backported, one would suddenly get corrupted lists in
release_pages_balloon():

- WARNING: CPU: 13 PID: 6586 at lib/list_debug.c:59 __list_del_entry+0xa1/0xd0
- list_del corruption. prev->next should be ffffe253961090a0, but was dead000000000100

Nowadays this race is no longer possible, but it is hidden behind very
ugly handling of __ClearPageMovable() and __PageMovable().

__ClearPageMovable() will not make __PageMovable() fail, only
PageMovable().  So the new check (__PageMovable(newpage)) will still
hold even after newpage was dequeued by virtio-balloon.

If anybody would ever change that special handling, the BUG would be
introduced again.  So instead, make it explicit and use the information
of the original isolated page before migration.

This patch can be backported fairly easy to stable kernels (in contrast
to the refactoring).

Link: http://lkml.kernel.org/r/20190129233217.10747-1-david@redhat.com
Fixes: d6d86c0a ("mm/balloon_compaction: redesign ballooned pages management")
Signed-off-by: David Hildenbrand <david@redhat.com>
Reported-by: Vratislav Bendel <vbendel@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Rafael Aquini <aquini@redhat.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Vratislav Bendel <vbendel@redhat.com>
Cc: Rafael Aquini <aquini@redhat.com>
Cc: Konstantin Khlebnikov <k.khlebnikov@samsung.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: <stable@vger.kernel.org>	[3.12 - 4.7]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The current help text caused some confusion in online forums about
whether or not to default-enable or default-disable psi in vendor
kernels.  This is because it doesn't communicate the reason for why we
made this setting configurable in the first place: that the overhead is
non-zero in an artificial scheduler stress test.

Since this isn't representative of real workloads, and the effect was
not measurable in scheduler-heavy real world applications such as the
webservers and memcache installations at Facebook, it's fair to point
out that this is a pretty cautious option to select.

Link: http://lkml.kernel.org/r/20190129233617.16767-1-hannes@cmpxchg.orgSigned-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>