- 17 Feb, 2011 6 commits
-
-
Arnaldo Carvalho de Melo authored
The man page has the details, here are some examples: [root@emilia ~]# perf list *fault* *:*wait* List of pre-defined events (to be used in -e): page-faults OR faults [Software event] minor-faults [Software event] major-faults [Software event] alignment-faults [Software event] emulation-faults [Software event] radeon:radeon_fence_wait_begin [Tracepoint event] radeon:radeon_fence_wait_end [Tracepoint event] writeback:wbc_writeback_wait [Tracepoint event] writeback:wbc_balance_dirty_wait [Tracepoint event] writeback:writeback_congestion_wait [Tracepoint event] writeback:writeback_wait_iff_congested [Tracepoint event] sched:sched_wait_task [Tracepoint event] sched:sched_process_wait [Tracepoint event] sched:sched_stat_wait [Tracepoint event] sched:sched_stat_iowait [Tracepoint event] syscalls:sys_enter_epoll_wait [Tracepoint event] syscalls:sys_exit_epoll_wait [Tracepoint event] syscalls:sys_enter_epoll_pwait [Tracepoint event] syscalls:sys_exit_epoll_pwait [Tracepoint event] syscalls:sys_enter_rt_sigtimedwait [Tracepoint event] syscalls:sys_exit_rt_sigtimedwait [Tracepoint event] syscalls:sys_enter_waitid [Tracepoint event] syscalls:sys_exit_waitid [Tracepoint event] syscalls:sys_enter_wait4 [Tracepoint event] syscalls:sys_exit_wait4 [Tracepoint event] syscalls:sys_enter_waitpid [Tracepoint event] syscalls:sys_exit_waitpid [Tracepoint event] [root@emilia ~]# Suggested-by:
Ingo Molnar <mingo@elte.hu> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-
Arnaldo Carvalho de Melo authored
[root@emilia ~]# perf report --stdio The perf.data file has no samples! [root@emilia ~]# The TUI shows a popup warning message with the same message. Reported-by:
Ingo Molnar <mingo@elte.hu> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-
Arnaldo Carvalho de Melo authored
While testing the --filter option I noticed that we were writing lots of unneeded stuff to the perf.data header when the filter ioctl fails, so move the atexit(atexit_header) call to after we create the counters successfully. Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-
Arnaldo Carvalho de Melo authored
So that we match the header where we state the number of events with the "Samples" column when using 'perf report -n/--show-nr-samples': [root@emilia ~]# perf record -a sleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.111 MB perf.data (~4860 samples) ] [root@emilia ~]# perf report --stdio --show-nr-samples # Events: 11 cycles # # Overhead Samples Command Shared Object Symbol # ........ .......... ........... .................. ............................ # 16.65% 1 sleep [kernel.kallsyms] [k] unmap_vmas 16.10% 1 perf libpthread-2.12.so [.] __pthread_cleanup_push_defer 15.79% 2 perf [kernel.kallsyms] [k] format_decode 12.88% 1 kworker/1:2 [kernel.kallsyms] [k] cache_reap 10.69% 1 swapper [kernel.kallsyms] [k] _raw_spin_lock 7.55% 1 sleep [kernel.kallsyms] [k] prepare_exec_creds 6.00% 1 perf [jbd2] [k] start_this_handle 5.29% 1 perf [kernel.kallsyms] [k] seq_read 4.75% 1 perf [kernel.kallsyms] [k] get_pid_task 4.30% 1 perf [kernel.kallsyms] [k] _raw_spin_unlock_irqrestore # # (For a higher level overview, try: perf report --sort comm,dso) # [root@emilia ~]# Reported-by:
Stephane Eranian <eranian@google.com> Acked-by:
Stephane Eranian <eranian@google.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-
Stephane Eranian authored
This patch changes the way perf stat prints event names at the end of a run. Until now, it was trying to reconstruct the event name from its encoding. The problem is that it would only print generic events without their modifiers (u, k, pp). This patch saves the event name as passed by the user in the evsel struct and uses it to print the final event name. This would also work in case perf is linked with a library (such as libpfm4) which provides full PMU event tables. $ perf stat -e cycles:u,cycles:k date Wed Feb 16 14:58:52 CET 2011 Performance counter stats for 'date': 568600 cycles:u 2779715 cycles:k 0.001908182 seconds time elapsed Cc: Arun Sharma <arun@sharma-home.net> Cc: David S. Miller <davem@davemloft.net> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Robert Richter <robert.richter@amd.com> Cc: Stephane Eranian <eranian@gmail.com> LPU-Reference: <4d5bdc64.98a1df0a.7aa3.06c2@mx.google.com> Signed-off-by:
Stephane Eranian <eranian@google.com> [ committer note: Fixed a merge problem with 023695d9 "Add cgroup support" ] Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-
Arnaldo Carvalho de Melo authored
The 023695d9 cset added a new file, util/cgroup.c, that is referenced from util/evsel.c, so it needs to be present in util/setup.py so that the python shared object binding works, fixing this: [root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/python/ [root@emilia linux]# ./tools/perf/python/twatch.py Traceback (most recent call last): File "./tools/perf/python/twatch.py", line 16, in <module> import perf ImportError: /home/acme/git/build/perf/python/perf.so: undefined symbol: close_cgroup Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-
- 16 Feb, 2011 21 commits
-
-
Masami Hiramatsu authored
Show filename which contains a target function with the function name on "--lines" mode, because perf-probe just shows the first function even if there are many same-name functions. Originally adopted by Franck Bui-Huu's patch which shows file name instead of function name. I've just modified it to show both of function name and file name, because of completeness of output. E.g.) $ perf probe -L t_show <t_show@/home/mhiramat/ksrc/linux-2.6-tip/kernel/trace/ftrace.c:0> 0 static int t_show(struct seq_file *m, void *v) 1 { 2 struct ftrace_iterator *iter = m->private; ... $ perf probe -L t_show@trace/trace.c <t_show@/home/mhiramat/ksrc/linux-2.6-tip/kernel/trace/trace.c:0> 0 static int t_show(struct seq_file *m, void *v) 1 { struct tracer *t = v; ... Original-patch-by:
Franck Bui-Huu <fbuihuu@gmail.com> Cc: 2nddept-manager@sdl.hitachi.co.jp Cc: Franck Bui-Huu <fbuihuu@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <20110210090816.1809.43426.stgit@ltc236.sdl.hitachi.co.jp> Signed-off-by:
Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-
Masami Hiramatsu authored
Since "perf probe --add" supports function@filename syntax, --line option should also support it. Cc: 2nddept-manager@sdl.hitachi.co.jp Cc: Franck Bui-Huu <fbuihuu@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: linux-kernel@vger.kernel.org LKML-Reference: <20110210090810.1809.26913.stgit@ltc236.sdl.hitachi.co.jp> Signed-off-by:
Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-
Jesse Brandeburg authored
The perf makefile is nicely complete except for a) an uninstall option b) a 'make help' description This patch implements b) it also comments out other non-working makefile targets Signed-off-by:
Jesse Brandeburg <jesse.brandeburg@intel.com> LKML-Reference: <new-submission> Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-
Arnaldo Carvalho de Melo authored
Not just for the percentage number, to see the hot lines more easily. Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-
Arnaldo Carvalho de Melo authored
Just like done on symbol__inc_addr_samples to catch misparsed offsets from objdump. Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-
Arnaldo Carvalho de Melo authored
The ui operations so far were used by just one thread, but 'perf top --tui' now has two threads updating the screen, so we need to use a mutex to avoid garbling the screen. Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-
Peter Zijlstra authored
There is no need to re-initialize the hrtimer every time we start it, so don't do that (shaves a few cycles). Also, since we know hrtimers run at a fixed rate (nanoseconds) we can pre-compute the desired frequency at which they tick. This avoids us having to go through the whole adaptive frequency feedback logic (shaves another few cycles). Signed-off-by:
Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1297448589.5226.47.camel@laptop> Signed-off-by:
Ingo Molnar <mingo@elte.hu>
-
Peter Zijlstra authored
By pre-computing the maximum number of samples per tick we can avoid a multiplication and a conditional since MAX_INTERRUPTS > max_samples_per_tick. Signed-off-by:
Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by:
Ingo Molnar <mingo@elte.hu>
-
Robert Richter authored
This patch adds support for AMD family 15h core counters. There are major changes compared to family 10h. First, there is a new perfctr msr range for up to 6 counters. Northbridge counters are separate now. This patch only adds support for core counters. Second, certain events may only be scheduled on certain counters. For this we need to extend the event scheduling and constraints. We use cpu feature flags to calculate family 15h msr address offsets. This way we later can implement a faster ALTERNATIVE() version for this. Signed-off-by:
Robert Richter <robert.richter@amd.com> Signed-off-by:
Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <20110215135210.GB5874@erda.amd.com> Signed-off-by:
Ingo Molnar <mingo@elte.hu>
-
Robert Richter authored
Instead of storing the base addresses we can store the counter's msr addresses directly in config_base/event_base of struct hw_perf_event. This avoids recalculating the address with each msr access. The addresses are configured one time. We also need this change to later modify the address calculation. Signed-off-by:
Robert Richter <robert.richter@amd.com> Signed-off-by:
Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1296664860-10886-5-git-send-email-robert.richter@amd.com> Signed-off-by:
Ingo Molnar <mingo@elte.hu>
-
Robert Richter authored
This patch allows the reservation of perfctrs with new msr addresses introduced for AMD cpu family 15h (0xc0010200/0xc0010201, etc). Signed-off-by:
Robert Richter <robert.richter@amd.com> Signed-off-by:
Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1296664860-10886-4-git-send-email-robert.richter@amd.com> Signed-off-by:
Ingo Molnar <mingo@elte.hu>
-
Robert Richter authored
This patch adds helper functions to calculate perfctr msr addresses. We need this to later add support for AMD family 15h cpus. For this we have to change the algorithms to generate the perfctr's msr addresses. Signed-off-by:
Robert Richter <robert.richter@amd.com> Signed-off-by:
Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1296664860-10886-3-git-send-email-robert.richter@amd.com> Signed-off-by:
Ingo Molnar <mingo@elte.hu>
-
Robert Richter authored
Use helper function in x86_pmu_enable_all() to minimize access to x86_pmu.eventsel in the fast path. The counter's msr address is now calculated using struct hw_perf_event. Later we add code that calculates the msr addresses with a table lookup which shouldn't be done in the fast path. Signed-off-by:
Robert Richter <robert.richter@amd.com> Signed-off-by:
Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1296664860-10886-2-git-send-email-robert.richter@amd.com> Signed-off-by:
Ingo Molnar <mingo@elte.hu>
-
Stephane Eranian authored
This patch adds the ability to filter monitoring based on container groups (cgroups) for both perf stat and perf record. It is possible to monitor multiple cgroup in parallel. There is one cgroup per event. The cgroups to monitor are passed via a new -G option followed by a comma separated list of cgroup names. The cgroup filesystem has to be mounted. Given a cgroup name, the perf tool finds the corresponding directory in the cgroup filesystem and opens it. It then passes that file descriptor to the kernel. Example: $ perf stat -B -a -e cycles:u,cycles:u,cycles:u -G test1,,test2 -- sleep 1 Performance counter stats for 'sleep 1': 2,368,667,414 cycles test1 2,369,661,459 cycles <not counted> cycles test2 1.001856890 seconds time elapsed Signed-off-by:
Stephane Eranian <eranian@google.com> Signed-off-by:
Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <4d590290.825bdf0a.7d0a.4890@mx.google.com> Signed-off-by:
Ingo Molnar <mingo@elte.hu>
-
Stephane Eranian authored
This kernel patch adds the ability to filter monitoring based on container groups (cgroups). This is for use in per-cpu mode only. The cgroup to monitor is passed as a file descriptor in the pid argument to the syscall. The file descriptor must be opened to the cgroup name in the cgroup filesystem. For instance, if the cgroup name is foo and cgroupfs is mounted in /cgroup, then the file descriptor is opened to /cgroup/foo. Cgroup mode is activated by passing PERF_FLAG_PID_CGROUP in the flags argument to the syscall. For instance to measure in cgroup foo on CPU1 assuming cgroupfs is mounted under /cgroup: struct perf_event_attr attr; int cgroup_fd, fd; cgroup_fd = open("/cgroup/foo", O_RDONLY); fd = perf_event_open(&attr, cgroup_fd, 1, -1, PERF_FLAG_PID_CGROUP); close(cgroup_fd); Signed-off-by:
Stephane Eranian <eranian@google.com> [ added perf_cgroup_{exit,attach} ] Signed-off-by:
Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <4d590250.114ddf0a.689e.4482@mx.google.com> Signed-off-by:
Ingo Molnar <mingo@elte.hu>
-
Peter Zijlstra authored
Make the ::exit method act like ::attach, it is after all very nearly the same thing. The bug had no effect on correctness - fixing it is an optimization for the scheduler. Also, later perf-cgroups patches rely on it. Signed-off-by:
Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by:
Paul Menage <menage@google.com> LKML-Reference: <1297160655.13327.92.camel@laptop> Signed-off-by:
Ingo Molnar <mingo@elte.hu>
-
Ingo Molnar authored
Merge reason: we need to queue up dependent patch Signed-off-by:
Ingo Molnar <mingo@elte.hu>
-
Peter Zijlstra authored
It was possible to call pmu::start() on an already running event. In particular this lead so some wreckage as the hrtimer events would re-initialize active timers. This was due to throttled events being activated again by scheduling. Scheduling in a context would add and force start events, resulting in running events with a possible throttle status. The next tick to hit that task will then try to unthrottle the event and call ->start() on an already running event. Reported-by:
Jeff Moyer <jmoyer@redhat.com> Cc: <stable@kernel.org> Signed-off-by:
Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by:
Ingo Molnar <mingo@elte.hu>
-
Cyrill Gorcunov authored
Several people have reported spurious unknown NMI messages on some P4 CPUs. This patch fixes it by checking for an overflow (negative counter values) directly, instead of relying on the P4_CCCR_OVF bit. Reported-by:
George Spelvin <linux@horizon.com> Reported-by:
Meelis Roos <mroos@linux.ee> Reported-by:
Don Zickus <dzickus@redhat.com> Reported-by:
Dave Airlie <airlied@gmail.com> Signed-off-by:
Cyrill Gorcunov <gorcunov@openvz.org> Cc: Lin Ming <ming.m.lin@intel.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <AANLkTinfuTfCck_FfaOHrDqQZZehtRzkBum4SpFoO=KJ@mail.gmail.com> Signed-off-by:
Ingo Molnar <mingo@elte.hu>
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommuLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: m68knommu: set flow handler for secondary interrupt controller of 5249 m68knommu: remove use of IRQ_FLG_LOCK from 68360 platform support m68knommu: fix dereference of port.tty m68knommu: add missing linker __modver section m68knommu: fix mis-named variable int set_irq_chip loop m68knommu: add optimize memmove() function m68k: remove arch specific non-optimized memcmp() m68knommu: fix use of un-defined _TIF_WORK_MASK m68knommu: Rename m548x_wdt.c to m54xx_wdt.c m68knommu: fix m548x_wdt.c compilation after headers renaming m68knommu: Remove dependencies on nonexistent M68KNOMMU
-
- 15 Feb, 2011 13 commits
-
-
Greg Ungerer authored
The secondary interrupt controller of the ColdFire 5249 code is not setting the edge triggered flow handler. Set it. Signed-off-by:
Greg Ungerer <gerg@uclinux.org>
-
Greg Ungerer authored
The m68knommu arch does not define or use IRQ_FLG_LOCK in its irq subsystem. Remove obsolete use of it. Signed-off-by:
Greg Ungerer <gerg@uclinux.org>
-
Greg Ungerer authored
The struct_tty associated with a port is now a direct pointer from within the local private driver info struct. So fix all uses of it. Signed-off-by:
Greg Ungerer <gerg@uclinux.org>
-
Greg Ungerer authored
Add missing linker section __modver to fix: LD vmlinux /usr/local/bin/../m68k-uclinux/bin/ld.real: error: no memory region specified for loadable section `__modver' Signed-off-by:
Greg Ungerer <gerg@uclinux.org>
-
Greg Ungerer authored
Compiling for 68360 targets gives: CC arch/m68knommu/platform/68360/ints.o arch/m68knommu/platform/68360/ints.c: In function ‘init_IRQ’: arch/m68knommu/platform/68360/ints.c:135:16: error: ‘irq’ undeclared (first use in this function) arch/m68knommu/platform/68360/ints.c:135:16: note: each undeclared identifier is reported only once for each function it appears in Fix variable name used. Signed-off-by:
Greg Ungerer <gerg@uclinux.org>
-
Greg Ungerer authored
Add an m68k/coldfire optimized memmove() function for the m68knommu arch. This is the same function as used by m68k. Simple speed tests show this is faster once buffers are larger than 4 bytes, and significantly faster on much larger buffers (4 times faster above about 100 bytes). This also goes part of the way to fixing a regression caused by commit ea61bc46 ("m68k/m68knommu: merge MMU and non-MMU string.h"), which breaks non-coldfire non-mmu builds (which is the 68x328 and 68360 families). They currently have no memmove() fucntion defined, since there was none in the m68knommu/lib functions. Signed-off-by:
Greg Ungerer <gerg@uclinux.org>
-
Greg Ungerer authored
The m68k arch implements its own memcmp() function. It is not optimized in any way (it is the most strait forward coding of memcmp you can get). Remove it and use the kernels standard memcmp() implementation. This also goes part of the way to fixing a regression caused by commit ea61bc46 ("m68k/m68knommu: merge MMU and non-MMU string.h"), which breaks non-coldfire non-mmu builds (which is the 68x328 and 68360 families). They currently have no memcmp() function defined, since there is none in the m68knommu/lib functions. Signed-off-by:
Greg Ungerer <gerg@uclinux.org> Acked-by:
Geert Uytterhoeven <geert@linux-m68k.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6Linus Torvalds authored
* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (27 commits) drm/radeon/kms: hopefully fix pll issues for real (v3) drm/radeon/kms: add bounds checking to avivo pll algo drm: fix wrong usages of drm_device in DRM Developer's Guide drm/radeon/kms: fix a few more atombios endian issues drm/radeon/kms: improve 6xx/7xx CS error output drm/radeon/kms: check AA resolve registers on r300 drm/radeon/kms: fix tracking of BLENDCNTL, COLOR_CHANNEL_MASK, and GB_Z on r300 drm/radeon/kms: use linear aligned for evergreen/ni bo blits drm/radeon/kms: use linear aligned for 6xx/7xx bo blits drm/radeon: fix race between GPU reset and TTM delayed delete thread. drm/radeon/kms: evergreen/ni big endian fixes (v2) drm/radeon/kms: 6xx/7xx big endian fixes drm/radeon/kms: atombios big endian fixes drm/radeon: 6xx/7xx non-kms endian fixes drm/radeon/kms: optimize CS state checking for r100->r500 drm: do not leak kernel addresses via /proc/dri/*/vma drm/radeon/kms: add connector table for mac g5 9600 radeon mkregtable: Add missing fclose() calls drm/radeon/kms: fix interlaced modes on dce4+ drm/radeon: fix memory debugging since d961db75 ...
-
Linus Torvalds authored
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6: pci: use security_capable() when checking capablities during config space read
-
Andrea Arcangeli authored
Transparent hugepages can only be created if rmap is fully functional. So we must prevent hugepages to be created while is_vma_temporary_stack() is true. This also optmizes away some harmless but unnecessary setting of khugepaged_scan.address and it switches some BUG_ON to VM_BUG_ON. Signed-off-by:
Andrea Arcangeli <aarcange@redhat.com> Acked-by:
Rik van Riel <riel@redhat.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6Linus Torvalds authored
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: ACPI / Video: Probe for output switch method when searching video devices. ACPI / Wakeup: Enable button GPEs unconditionally during initialization ACPI / ACPICA: Avoid crashing if _PRW is defined for the root object ACPI: Fix acpi_os_read_memory() and acpi_os_write_memory() (v2)
-
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-idle-2.6Linus Torvalds authored
* 'tools-release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-idle-2.6: tools: turbostat: style updates tools: turbostat: fix bitwise and operand
-
Len Brown authored
-