- 22 May, 2002 2 commits
-
-
Kai Germaschewski authored
Use the just introduced Rules.make extension to clean up drivers/net/*/Makefile.
-
Kai Germaschewski authored
New-style Makefiles have a nice way of declaring objects which need to be built either built-in or as modules: obj-$(CONFIG_EEPRO100) += eepro100.o However, handling objects in subdirectories, which need to be built and linked is not as nice: subdir-$(CONFIG_E100) += e100 ifeq ($(CONFIG_E100),y) obj-y += e100/built-in.o endif This means we descend into the subdirectory when building vmlinux / modules, depending on CONFIG_XXX. When we are building vmlinux we also need to link whatever has been built in the subdirectory, so we add it to $(obj-y) at the appropriate place (link order is important). Now, the extension below allows to rewrite the second case into obj-$(CONFIG_E100) += e100/ which looks much nicer ;-) Existing behavior is not changed, and the only prerequisite to using the extension above is that the O_TARGET in the subdir is named "built-in.o".
-
- 20 May, 2002 38 commits
-
-
Linus Torvalds authored
-
David Gibson authored
This adds a #include to drivers/pci/power.c to define __init. At least on PPC4xx this fixes compile problems.
-
Linus Torvalds authored
-
Linus Torvalds authored
-
http://linux-isdn.bkbits.net/linux-2.5.makeLinus Torvalds authored
into penguin.transmeta.com:/home/penguin/torvalds/repositories/kernel/linux
-
Kai Germaschewski authored
The recursive build used to do the following: On entering a directory, we would first call make in the subdirectories listed in $(subdir-y), and then call make in the current directory again, with the target 'all_targets'. The second invocation was used to make sure that the subdir makes completed before trying to build the O_TARGET/L_TARGET in the current dir, since this would link in objects in these subdirectories. However, using correct dependencies achieves the same, i.e. just make the objects in $(obj-y) which are not in the local subdirectory depend on 'sub_dirs', which is the rule to descend into subdirs. This patch actually halves the time "make vmlinux" takes when there's nothing to do (which makes sense, as we save half of the make invocations)
-
Kai Germaschewski authored
-
Kai Germaschewski authored
There's no good reason to build the objects in init/ explicitly from the top-level Makefile. Instead, handle init/ like every other subdir, which also provides the automatic checks for a changed command line etc.
-
http://linux-isdn.bkbits.net/linux-2.5.miscLinus Torvalds authored
into penguin.transmeta.com:/home/penguin/torvalds/repositories/kernel/linux
-
Kai Germaschewski authored
Fix some trivial variable/functions/label defined (static) but not used warnings.
-
Kai Germaschewski authored
Removal of locks.h broke the build due to missing definition of capable() and current.
-
Linus Torvalds authored
-
http://linux-isdn.bkbits.net/linux-2.5.exportLinus Torvalds authored
into penguin.transmeta.com:/home/penguin/torvalds/repositories/kernel/linux
-
Kai Germaschewski authored
into tp1.ruhr-uni-bochum.de:/home/kai/kernel/v2.5/linux-2.5.export
-
Jack Hammer authored
ips driver update ( version 5.10.13-BETA )
-
Linus Torvalds authored
-
Linus Torvalds authored
-
Christoph Hellwig authored
The lock.h header contained some hand-crafted lcoking routines from the pre-SMP days. In 2.5 only lock_super/unlock_super are left, guarded by a number of completly unrelated (!) includes. This patch moves lock_super/unlock_super to fs.h, which defined struct super_block that is needed for those to operate it, removes locks.h and updates all caller to not include it and add the missing, previously nested includes where needed.
-
Linus Torvalds authored
-
Jan Kara authored
This patch implements ioctl() for getting space used by file. I agree it's ioctl() abuse, it doesn't work on links and has other ugly properties. Better would be to change 'struct stat' but changing it just due to this is overkill and it will take some time before there will be enough changes which will provoke yet another struct stat :). So this is temporary solution... If you don't like it, simply reject it. The function it provides is not fundamental... So that should be all patches. Any comments (or decision about including/not including) welcome. Honza
-
Jan Kara authored
This patch implements configurable backward compatible quota interface. Maybe this isn't needed in 2.5 but as some people want to use patches in 2.4 where it's necessary I have implemented it.
-
Jan Kara authored
Implemented proper syncing of dquots - ie. also global information about quota files are synced. We find info to sync by walking through all superblocks...
-
Jan Kara authored
Remove use of 'short' in parameters of functions. 'int' is used instead.
-
Jan Kara authored
Implementation of new quota format. The code is almost the same as in -ac versions of kernel. All the code for new format is in quota_v2.c
-
Jan Kara authored
Implementation of old quota format. All the code for old format is now in quota_v1.c. Code mostly remained the same as in older kernels (just minor changes were needed to bind it with quota interface).
-
Jan Kara authored
This is probably the largest chunk in quota patches. It removes old quotactl interface and implements new one. New interface should not need arch specific conversions so they are removed. All quota interface stuff is moved to quota.c so we can easily separate things which should be compiled even if quota is disabled (mainly because XFS needs some interface even if standard VFS quota is disabled). Callbacks to filesystem on quota_on() and quota_off() are implemented (needed by Ext3), quota operations callbacks are now set in super.c on superblock initialization and not on quota_on(). This way it starts to make sense to have callbacks on alloc_space(), alloc_inode() etc. as filesystem can override them on read_super(). This will be used later for implementing journalled quota.
-
Jan Kara authored
This patch implements counting of used space in inodes in bytes. New field i_bytes is added and used space modulo 512 is kept in it (rest is still kept in i_blocks). Functions manipulating both i_blocks and i_bytes are implemented (inode_add_bytes(), inode_sub_bytes() and inode_set_bytes()). Filesystems allocating only in whole blocks can safely ignore i_bytes field and continue using i_blocks...
-
Jan Kara authored
This patch implements accounting of used space in bytes.
-
Jan Kara authored
This patch moves reporting of quota statistics from Q_GETSTATS call to /proc/fs/quota. Also reporting of registered quota formats is added.
-
Jan Kara authored
This patch implements list 'quota_formats' with registered quota formats and functions register_quota_format() and unregister_quota_format() for manipulating the list.
-
Jan Kara authored
This patch removes most format dependent code from dquot.c and quota.h and puts calls of callback functions instead.
-
Jan Kara authored
This patch adds dq_dup_ref to struct dquot. Functions altering just usage of quota take just this duplicated reference, inodes, quotactl() helpers take real dq_count reference. dqput() blocks if there are some duplicated references and put reference is last 'real one'. This way is assured that quota IO is not done from functions altering quota usage (quota structure is written on last dqput()).
-
Linus Torvalds authored
-
Jan Harkes authored
As of the last patch the inode_hashtable doesn't really need to be indexed by i_ino anymore, the only reason we still have to keep the hashvalue and i_ino identical is because of insert_inode_hash. If at some point a FS specific getattr method is implemented it will be possible to completely remove any use of i_ino by the VFS.
-
Jan Harkes authored
This patch starts taking i_ino dependencies out of the VFS. The FS provided test and set callbacks become responsible for testing and setting inode->i_ino. Because most filesystems are based on 32-bit unique inode numbers several functions are duplicated to keep iget_locked as a fast path. We can avoid unnecessary pointer dereferences and function calls for this specific case.
-
Jan Harkes authored
Now that we have no more users of iget4 we can kill the function and the associated read_inode2 callback (i.e. the 'reiserfs specific hack'). Document iget5_locked as the replacement for iget4 in filesystems/porting.
-
Jan Harkes authored
Convert existing filesystems (Coda/NFS/ReiserFS) that currently use iget4 to iget5_locked.
-
Jan Harkes authored
Now we introduce iget_locked and iget5_locked. These are similar to iget, but return a locked inode and read_inode has not been called. So the FS has to call read_inode to initialize the inode and then unlock it with unlock_new_inode(). This patch is based on the icreate patch from the XFS group, i.e. it is pretty much identical except for function naming.
-