- 15 Feb, 2022 38 commits
-
-
Abdun Nihaal authored
Some of the sta_* and STA_* macros are not used. Remove those unused macros. Signed-off-by:
Abdun Nihaal <abdun.nihaal@gmail.com> Link: https://lore.kernel.org/r/c2453078b2d46119d167f2d0e4690cc87fc4b77e.1644422181.git.abdun.nihaal@gmail.comSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Abdun Nihaal authored
The function argument padapter is not used in chk_ap_is_alive. Remove it. Signed-off-by:
-
Abdun Nihaal authored
The function argument action is not used in on_action_public_default. Remove it. Signed-off-by:
-
Abdun Nihaal authored
The argument priv is not used in function __nat25_has_expired. Remove it. Signed-off-by:
-
Abdun Nihaal authored
The definition of function __nat25_db_print is empty. Remove it. Signed-off-by:
-
Abdun Nihaal authored
The definition of function _InitOperationMode is empty. Remove it. Signed-off-by:
-
Abdun Nihaal authored
The definition of function rtw_mfree_mlme_priv_lock is empty. Remove it. Signed-off-by:
-
Abdun Nihaal authored
The definition of function rtw_get_encrypt_decrypt_from_registrypriv is empty. Remove it. Signed-off-by:
-
Abdun Nihaal authored
struct zero_bulkout_context is not used. Remove it. Signed-off-by:
-
Vihas Makwana authored
_rtw_free_sta_priv() always returns _SUCCESS and it's return value isn't checked either. So it makes sense to mark it as void instead of u32. Signed-off-by:
Vihas Makwana <makvihas@gmail.com> Link: https://lore.kernel.org/r/20220213173424.39935-1-makvihas@gmail.comSigned-off-by:
-
Arınç ÜNAL authored
GB-PC1 uses some of the rgmii2 pins (22 - 33) as GPIO. Therefore, the rgmii2 bus cannot be used on this device. Overwrite pinctrl-0 property under the ethernet node without rgmii2_pins on the GB-PC1 devicetree. Tested-by:
Sergio Paracuellos <sergio.paracuellos@gmail.com> Signed-off-by:
Arınç ÜNAL <arinc.unal@arinc9.com> Link: https://lore.kernel.org/r/20220215081725.3463-2-arinc.unal@arinc9.comSigned-off-by:
-
Arınç ÜNAL authored
Fix pinctrl-0 items under the ethernet node to be size-1 items. Current notation would be used on specifications with non-zero cells. Fixes: 0a93c0d7 ("staging: mt7621-dts: fix pinctrl properties for ethernet") Reported-by:
Sander Vanheule <sander@svanheule.net> Signed-off-by:
-
Martin Kaiser authored
The r8188eu driver does no longer access rf path b registers via PHYRegDef. Change the PHYRegDef array in struct hal_data_8188e to a single variable that holds the register addresses for rf path a. Remove the initialisation of path b register addresses. Signed-off-by:
Martin Kaiser <martin@kaiser.cx> Link: https://lore.kernel.org/r/20220212161737.381841-11-martin@kaiser.cxSigned-off-by:
-
Martin Kaiser authored
All callers of phy_RFSerialRead set the eRFPath parameter to RF_PATH_A. Remove the parameter and use RF_PATH_A directly. Signed-off-by:
-
Martin Kaiser authored
All callers of rtl8188e_PHY_QueryRFReg set the eRFPath parameter to RF_PATH_A. Remove the parameter and use RF_PATH_A directly. Signed-off-by:
-
Martin Kaiser authored
Rf registers can be read by rtw_wx_read_rf or via the private ioctl 0x0B. The latter calls rtw_dbg_port. Limit rf register reads to path a in rtw_debug_port. Signed-off-by:
-
Martin Kaiser authored
Commit 3b011b09 ("staging: r8188eu: limit rf register writes to path a") limits rf register writes by private ioctls to RF_PATH_A. Apart from private ioctls, the rest of the driver uses only path a. This patch limits rf register reads by the private ioctl 0x0D, which calls rtw_wx_read_rf, to path a. Signed-off-by:
-
Martin Kaiser authored
The path variable is always 0 in bb_reg_dump. Remove the path variable and replace the constant 0 with RF_PATH_A to make it clearer that path a is used. Signed-off-by:
-
Martin Kaiser authored
The only caller of phy_RFSerialWrite sets the eRFPath parameter to RF_PATH_A. Remove the parameter and use RF_PATH_A directly. Signed-off-by:
-
Martin Kaiser authored
All callers of rtl8188e_PHY_SetRFReg set the eRFPath parameter to RF_PATH_A. Remove the parameter and use RF_PATH_A directly. Signed-off-by:
-
Martin Kaiser authored
Commit 3b011b09 ("staging: r8188eu: limit rf register writes to path a") limited the rtw_wx_write_rf function to write only rf registers for path a. The private ioctl 0x0B invokes the rtw_dbg_port function. This ioctl can also be used for writing rf registers. We should limit these register writes to rf path a as well. Signed-off-by:
-
Martin Kaiser authored
We've already limited the rtw_wx_write_rf function to RF_PATH_A in commit 3b011b09 ("staging: r8188eu: limit rf register writes to path a"). Set RF_PATH_A explicitly when we call rtl8188e_PHY_SetRFReg. This will make it easier later to verify that all callers of rtl8188e_PHY_SetRFReg use path a. Signed-off-by:
-
Michael Straube authored
There are some unused enums in the ieee80211.h header. Remove them. Signed-off-by:
Michael Straube <straube.linux@gmail.com> Link: https://lore.kernel.org/r/20220210101623.13758-3-straube.linux@gmail.comSigned-off-by:
-
Michael Straube authored
There are lots of unused structures in the ieee80211.h header. Remove them. Signed-off-by:
-
Martin Kaiser authored
There's no need to store the usb device speed in struct dvobj_priv. We can read the speed from struct usb_device. dvobj_priv has a pointer to the usb_device. Reorder one if-statement to make the code clearer. Signed-off-by:
-
Michael Straube authored
Remove unused constants from enum hw_variables. Signed-off-by:
-
Michael Straube authored
Remove an unused enum from rtl8188e_hal_init.c. Signed-off-by:
-
Fabio M. De Francesco authored
checkpatch.pl emits the following warning: CHECK: Prefer kzalloc(sizeof(*pcmd)...) over kzalloc(sizeof(struct cmd_obj)...) + pcmd = kzalloc(sizeof(struct cmd_obj), GFP_KERNEL); CHECK: Prefer kzalloc(sizeof(*psetkeyparm)...) over kzalloc(sizeof(struct setkey_parm)...) + psetkeyparm = kzalloc(sizeof(struct setkey_parm), GFP_KERNEL). According to the above "CHECK[S]", use the preferred style in the two kzalloc() of rtw_set_key(). Signed-off-by:
Fabio M. De Francesco <fmdefrancesco@gmail.com> Link: https://lore.kernel.org/r/20220208180426.27455-2-fmdefrancesco@gmail.comSigned-off-by:
-
Vihas Makwana authored
Keep the success path and error path separate in rtw_usb_if1_init() and drop the "status" variable. Also, remove do-nothing gotos. Reviewed-by:
Pavel Skripkin <paskripkin@gmail.com> Reviewed-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Sergio Paracuellos authored
MT7621 system controller node is already providing the clocks for the whole system but must also serve as a reset provider. Hence, add reset controller related code to the clock driver itself. To get resets properly ready for the rest of the world we need to move platform driver initialization process to 'arch_initcall'. CC: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by:
Philipp Zabel <p.zabel@pengutronix.de> Acked-by:
Stephen Boyd <sboyd@kernel.org> Signed-off-by:
-
Sergio Paracuellos authored
Make system controller a reset provider for all the peripherals in the MT7621 SoC adding '#reset-cells' property. Acked-by:
Rob Herring <robh@kernel.org> Acked-by:
-
Jiapeng Chong authored
Eliminate the follow coccicheck warning: ./drivers/staging/r8188eu/hal/usb_halinit.c:1105:3-5: WARNING: possible condition with no effect (if == else). Reported-by:
Abaci Robot <abaci@linux.alibaba.com> Signed-off-by:
Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Link: https://lore.kernel.org/r/20220211080322.80388-1-jiapeng.chong@linux.alibaba.comSigned-off-by:
-
Minghao Chi (CGEL ZTE) authored
'destroy_workqueue()' already drains the queue before destroying it, so there is no need to flush it explicitly. Remove the redundant 'flush_workqueue()' calls. Reported-by:
Zeal Robot <zealci@zte.com.cn> Reviewed-by:
Rui Miguel Silva <rmfrfs@gmail.com> Signed-off-by:
Minghao Chi (CGEL ZTE) <chi.minghao@zte.com.cn> Link: https://lore.kernel.org/r/20220210060205.1607792-1-chi.minghao@zte.com.cnSigned-off-by:
-
Minghao Chi (CGEL ZTE) authored
'destroy_workqueue()' already drains the queue before destroying it, so there is no need to flush it explicitly. Remove the redundant 'flush_workqueue()' calls. Reported-by:
-
Cai Huoqing authored
Replace "struct list_head head = LIST_HEAD_INIT(head)" with "LIST_HEAD(head)" to simplify the code. Signed-off-by:
Cai Huoqing <cai.huoqing@linux.dev> Link: https://lore.kernel.org/r/20220209032645.38305-1-cai.huoqing@linux.devSigned-off-by:
-
Cai Huoqing authored
Replace "struct list_head head = LIST_HEAD_INIT(head)" with "LIST_HEAD(head)" to simplify the code. Signed-off-by:
-
Jérôme Pouiller authored
We don't want to support legacy PDS format. Signed-off-by:
Jérôme Pouiller <jerome.pouiller@silabs.com> Link: https://lore.kernel.org/r/20220211162659.528333-3-Jerome.Pouiller@silabs.comSigned-off-by:
-
Jérôme Pouiller authored
The device needs data about the antenna configuration. This information in provided by PDS (Platform Data Set, this is the wording used in WF200 documentation) files. Until now, the driver had to parse the PDS file before to send it. This solution was not acceptable for the vanilla kernel. We have slightly changed the PDS format so it is now an array of Type-Length-Value. This patch allows to support new format and keep compatibility with legacy format. Signed-off-by:
-
- 14 Feb, 2022 1 commit
-
-
Greg Kroah-Hartman authored
We need the staging driver fixes in here as well. Signed-off-by:
-
- 13 Feb, 2022 1 commit
-
-
Linus Torvalds authored
-
