- 10 Aug, 2022 19 commits
-
-
Gavin Shan authored
The rseq information is registered by TLS, starting from glibc-2.35. In this case, the test always fails due to syscall(__NR_rseq). For example, on RHEL9.1 where upstream glibc-2.35 features are enabled on downstream glibc-2.34, the test fails like below. # ./rseq_test ==== Test Assertion Failure ==== rseq_test.c:60: !r pid=112043 tid=112043 errno=22 - Invalid argument 1 0x0000000000401973: main at rseq_test.c:226 2 0x0000ffff84b6c79b: ?? ??:0 3 0x0000ffff84b6c86b: ?? ??:0 4 0x0000000000401b6f: _start at ??:? rseq failed, errno = 22 (Invalid argument) # rpm -aq | grep glibc-2 glibc-2.34-39.el9.aarch64 Fix the issue by using "../rseq/rseq.c" to fetch the rseq information, registred by TLS if it exists. Otherwise, we're going to register our own rseq information as before. Reported-by:Yihuang Yu <yihyu@redhat.com> Suggested-by:
Florian Weimer <fweimer@redhat.com> Suggested-by:
Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Suggested-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
Gavin Shan <gshan@redhat.com> Message-Id: <20220810104114.6838-2-gshan@redhat.com> Signed-off-by:
-
Oliver Upton authored
Doing debugfs creation after vm creation leaves things in a quasi-initialized state for a while. This is further complicated by the fact that we tear down debugfs from kvm_destroy_vm(). Align debugfs and stats init/destroy with the vm init/destroy pattern to avoid any headaches. Note the fix for a benign mistake in error handling for calls to kvm_arch_create_vm_debugfs() rolled in. Since all implementations of the function return 0 unconditionally it isn't actually a bug at the moment. Lastly, tear down debugfs/stats data in the kvm_create_vm_debugfs() error path. Previously it was safe to assume that kvm_destroy_vm() would take out the garbage, that is no longer the case. Signed-off-by:
Oliver Upton <oupton@google.com> Message-Id: <20220720092259.3491733-6-oliver.upton@linux.dev> Signed-off-by:
-
Oliver Upton authored
At the time the VM fd is used in kvm_create_vm_debugfs(), the fd has been allocated but not yet installed. It is only really useful as an identifier in strings for the VM (such as debugfs). Treat it exactly as such by passing the string name of the fd to kvm_create_vm_debugfs(), futureproofing against possible misuse of the VM fd. Suggested-by:
Sean Christopherson <seanjc@google.com> Signed-off-by:
-
Oliver Upton authored
Allocate a VM's fd at the very beginning of kvm_dev_ioctl_create_vm() so that KVM can use the fd value to generate strigns, e.g. for debugfs, when creating and initializing the VM. Signed-off-by:
-
Oliver Upton authored
Initialize stats_id alongside other kvm_vcpu fields to make it more difficult to unintentionally access stats_id before it's set. No functional change intended. Signed-off-by:
-
Oliver Upton authored
Initialize stats_id alongside other struct kvm fields to make it more difficult to unintentionally access stats_id before it's set. While at it, move the format string to the first line of the call and fix the indentation of the second line. No functional change intended. Signed-off-by:
-
Sean Christopherson authored
Add compile-time and init-time sanity checks to ensure that the MMIO SPTE mask doesn't overlap the MMIO SPTE generation or the MMU-present bit. The generation currently avoids using bit 63, but that's as much coincidence as it is strictly necessarly. That will change in the future, as TDX support will require setting bit 63 (SUPPRESS_VE) in the mask. Explicitly carve out the bits that are allowed in the mask so that any future shuffling of SPTE bits doesn't silently break MMIO caching (KVM has broken MMIO caching more than once due to overlapping the generation with other things). Suggested-by:
Kai Huang <kai.huang@intel.com> Signed-off-by:
-
Mingwei Zhang authored
Rename the tracepoint function from trace_kvm_async_pf_doublefault() to trace_kvm_async_pf_repeated_fault() to make it clear, since double fault has nothing to do with this trace function. Asynchronous Page Fault (APF) is an artifact generated by KVM when it cannot find a physical page to satisfy an EPT violation. KVM uses APF to tell the guest OS to do something else such as scheduling other guest processes to make forward progress. However, when another guest process also touches a previously APFed page, KVM halts the vCPU instead of generating a repeated APF to avoid wasting cycles. Double fault (#DF) clearly has a different meaning and a different consequence when triggered. #DF requires two nested contributory exceptions instead of two page faults faulting at the same address. A prevous bug on APF indicates that it may trigger a double fault in the guest [1] and clearly this trace function has nothing to do with it. So rename this function should be a valid choice. No functional change intended. [1] https://www.spinics.net/lists/kvm/msg214957.htmlSigned-off-by:
Mingwei Zhang <mizhang@google.com> Message-Id: <20220807052141.69186-1-mizhang@google.com> Signed-off-by:
-
Coleman Dietsch authored
Stop Xen timer (if it's running) prior to changing the IRQ vector and potentially (re)starting the timer. Changing the IRQ vector while the timer is still running can result in KVM injecting a garbage event, e.g. vm_xen_inject_timer_irqs() could see a non-zero xen.timer_pending from a previous timer but inject the new xen.timer_virq. Fixes: 53639526 ("KVM: x86/xen: handle PV timers oneshot mode") Cc: stable@vger.kernel.org Link: https://syzkaller.appspot.com/bug?id=8234a9dfd3aafbf092cc5a7cd9842e3ebc45fc42 Reported-by: syzbot+e54f930ed78eb0f85281@syzkaller.appspotmail.com Signed-off-by:
Coleman Dietsch <dietschc@csp.edu> Reviewed-by:
David Woodhouse <dwmw@amazon.co.uk> Message-Id: <20220808190607.323899-3-dietschc@csp.edu> Signed-off-by:
-
Coleman Dietsch authored
Add a check for existing xen timers before initializing a new one. Currently kvm_xen_init_timer() is called on every KVM_XEN_VCPU_ATTR_TYPE_TIMER, which is causing the following ODEBUG crash when vcpu->arch.xen.timer is already set. ODEBUG: init active (active state 0) object type: hrtimer hint: xen_timer_callbac0 RIP: 0010:debug_print_object+0x16e/0x250 lib/debugobjects.c:502 Call Trace: __debug_object_init debug_hrtimer_init debug_init hrtimer_init kvm_xen_init_timer kvm_xen_vcpu_set_attr kvm_arch_vcpu_ioctl kvm_vcpu_ioctl vfs_ioctl Fixes: 53639526 ("KVM: x86/xen: handle PV timers oneshot mode") Cc: stable@vger.kernel.org Link: https://syzkaller.appspot.com/bug?id=8234a9dfd3aafbf092cc5a7cd9842e3ebc45fc42 Reported-by: syzbot+e54f930ed78eb0f85281@syzkaller.appspotmail.com Signed-off-by:
-
Sean Christopherson authored
Disable SEV-ES if MMIO caching is disabled as SEV-ES relies on MMIO SPTEs generating #NPF(RSVD), which are reflected by the CPU into the guest as a #VC. With SEV-ES, the untrusted host, a.k.a. KVM, doesn't have access to the guest instruction stream or register state and so can't directly emulate in response to a #NPF on an emulated MMIO GPA. Disabling MMIO caching means guest accesses to emulated MMIO ranges cause #NPF(!PRESENT), and those flavors of #NPF cause automatic VM-Exits, not #VC. Adjust KVM's MMIO masks to account for the C-bit location prior to doing SEV(-ES) setup, and document that dependency between adjusting the MMIO SPTE mask and SEV(-ES) setup. Fixes: b09763da ("KVM: x86/mmu: Add module param to disable MMIO caching (for testing)") Reported-by:
Michael Roth <michael.roth@amd.com> Tested-by:
-
Sean Christopherson authored
Fully re-evaluate whether or not MMIO caching can be enabled when SPTE masks change; simply clearing enable_mmio_caching when a configuration isn't compatible with caching fails to handle the scenario where the masks are updated, e.g. by VMX for EPT or by SVM to account for the C-bit location, and toggle compatibility from false=>true. Snapshot the original module param so that re-evaluating MMIO caching preserves userspace's desire to allow caching. Use a snapshot approach so that enable_mmio_caching still reflects KVM's actual behavior. Fixes: 8b9e74bf ("KVM: x86/mmu: Use enable_mmio_caching to track if MMIO caching is enabled") Reported-by:
-
Sean Christopherson authored
Mark kvm_mmu_x86_module_init() with __init, the entire reason it exists is to initialize variables when kvm.ko is loaded, i.e. it must never be called after module initialization. Fixes: 1d0e8480 ("KVM: x86/mmu: Resolve nx_huge_pages when kvm.ko is loaded") Cc: stable@vger.kernel.org Reviewed-by:
-
Michal Luczaj authored
The emulator mishandles LEA with register source operand. Even though such LEA is illegal, it can be encoded and fed to CPU. In which case real hardware throws #UD. The emulator, instead, returns address of x86_emulate_ctxt._regs. This info leak hurts host's kASLR. Tell the decoder that illegal LEA is not to be emulated. Signed-off-by:
Michal Luczaj <mhal@rbox.co> Message-Id: <20220729134801.1120-1-mhal@rbox.co> Signed-off-by:
-
Yu Zhang authored
kvm_fixup_and_inject_pf_error() was introduced to fixup the error code( e.g., to add RSVD flag) and inject the #PF to the guest, when guest MAXPHYADDR is smaller than the host one. When it comes to nested, L0 is expected to intercept and fix up the #PF and then inject to L2 directly if - L2.MAXPHYADDR < L0.MAXPHYADDR and - L1 has no intention to intercept L2's #PF (e.g., L2 and L1 have the same MAXPHYADDR value && L1 is using EPT for L2), instead of constructing a #PF VM Exit to L1. Currently, with PFEC_MASK and PFEC_MATCH both set to 0 in vmcs02, the interception and injection may happen on all L2 #PFs. However, failing to initialize 'fault' in kvm_fixup_and_inject_pf_error() may cause the fault.async_page_fault being NOT zeroed, and later the #PF being treated as a nested async page fault, and then being injected to L1. Instead of zeroing 'fault' at the beginning of this function, we mannually set the value of 'fault.async_page_fault', because false is the value we really expect. Fixes: 89786147 ("KVM: x86: Add helper functions for illegal GPA checking and page fault injection") Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=216178Reported-by:
Yang Lixiao <lixiao.yang@intel.com> Signed-off-by:
Yu Zhang <yu.c.zhang@linux.intel.com> Reviewed-by:
-
Sean Christopherson authored
Bug the VM if retrieving the x2APIC MSR/register while processing an accelerated vAPIC trap VM-Exit fails. In theory it's impossible for the lookup to fail as hardware has already validated the register, but bugs happen, and not checking the result of kvm_lapic_msr_read() would result in consuming the uninitialized "val" if a KVM or hardware bug occurs. Fixes: 1bd9dfec ("KVM: x86: Do not block APIC write for non ICR registers") Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Cc: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Signed-off-by:
-
Paolo Bonzini authored
Commit 7e2175eb ("KVM: x86: Fix recording of guest steal time / preempted status", 2021-11-11) open coded the previous call to kvm_map_gfn, but in doing so it dropped the comparison between the cached guest physical address and the one in the MSR. This cause an incorrect cache hit if the guest modifies the steal time address while the memslots remain the same. This can happen with kexec, in which case the preempted bit is written at the address used by the old kernel instead of the old one. Cc: David Woodhouse <dwmw@amazon.co.uk> Cc: stable@vger.kernel.org Fixes: 7e2175eb ("KVM: x86: Fix recording of guest steal time / preempted status") Signed-off-by:
-
Paolo Bonzini authored
Commit 7e2175eb ("KVM: x86: Fix recording of guest steal time / preempted status", 2021-11-11) open coded the previous call to kvm_map_gfn, but in doing so it dropped the comparison between the cached guest physical address and the one in the MSR. This cause an incorrect cache hit if the guest modifies the steal time address while the memslots remain the same. This can happen with kexec, in which case the steal time data is written at the address used by the old kernel instead of the old one. While at it, rename the variable from gfn to gpa since it is a plain physical address and not a right-shifted one. Reported-by:
Dave Young <ruyang@redhat.com> Reported-by:
Xiaoying Yan <yiyan@redhat.com> Analyzed-by:
Dr. David Alan Gilbert <dgilbert@redhat.com> Cc: David Woodhouse <dwmw@amazon.co.uk> Cc: stable@vger.kernel.org Fixes: 7e2175eb ("KVM: x86: Fix recording of guest steal time / preempted status") Signed-off-by:
-
Paolo Bonzini authored
Commit 49de12ba ("selftests: drop KSFT_KHDR_INSTALL make target") dropped from tools/testing/selftests/lib.mk the code related to KSFT_KHDR_INSTALL, but in doing so it also dropped the definition of the ARCH variable. The ARCH variable is used in several subdirectories, but kvm/ is the only one of these that was using KSFT_KHDR_INSTALL. As a result, kvm selftests cannot be built anymore: In file included from include/x86_64/vmx.h:12, from x86_64/vmx_pmu_caps_test.c:18: include/x86_64/processor.h:15:10: fatal error: asm/msr-index.h: No such file or directory 15 | #include <asm/msr-index.h> | ^~~~~~~~~~~~~~~~~ In file included from ../../../../tools/include/asm/atomic.h:6, from ../../../../tools/include/linux/atomic.h:5, from rseq_test.c:15: ../../../../tools/include/asm/../../arch/x86/include/asm/atomic.h:11:10: fatal error: asm/cmpxchg.h: No such file or directory 11 | #include <asm/cmpxchg.h> | ^~~~~~~~~~~~~~~ Fix it by including the definition that was present in lib.mk. Fixes: 49de12ba ("selftests: drop KSFT_KHDR_INSTALL make target") Cc: Guillaume Tucker <guillaume.tucker@collabora.com> Cc: Anders Roxell <anders.roxell@linaro.org> Cc: Shuah Khan <skhan@linuxfoundation.org> Cc: linux-kselftest@vger.kernel.org Signed-off-by:
-
- 05 Aug, 2022 21 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mmLinus Torvalds authored
Pull MM updates from Andrew Morton: "Most of the MM queue. A few things are still pending. Liam's maple tree rework didn't make it. This has resulted in a few other minor patch series being held over for next time. Multi-gen LRU still isn't merged as we were waiting for mapletree to stabilize. The current plan is to merge MGLRU into -mm soon and to later reintroduce mapletree, with a view to hopefully getting both into 6.1-rc1. Summary: - The usual batches of cleanups from Baoquan He, Muchun Song, Miaohe Lin, Yang Shi, Anshuman Khandual and Mike Rapoport - Some kmemleak fixes from Patrick Wang and Waiman Long - DAMON updates from SeongJae Park - memcg debug/visibility work from Roman Gushchin - vmalloc speedup from Uladzislau Rezki - more folio conversion work from Matthew Wilcox - enhancements for coherent device memory mapping from Alex Sierra - addition of shared pages tracking and CoW support for fsdax, from Shiyang Ruan - hugetlb optimizations from Mike Kravetz - Mel Gorman has contributed some pagealloc changes to improve latency and realtime behaviour. - mprotect soft-dirty checking has been improved by Peter Xu - Many other singleton patches all over the place" [ XFS merge from hell as per Darrick Wong in https://lore.kernel.org/all/YshKnxb4VwXycPO8@magnolia/ ] * tag 'mm-stable-2022-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (282 commits) tools/testing/selftests/vm/hmm-tests.c: fix build mm: Kconfig: fix typo mm: memory-failure: convert to pr_fmt() mm: use is_zone_movable_page() helper hugetlbfs: fix inaccurate comment in hugetlbfs_statfs() hugetlbfs: cleanup some comments in inode.c hugetlbfs: remove unneeded header file hugetlbfs: remove unneeded hugetlbfs_ops forward declaration hugetlbfs: use helper macro SZ_1{K,M} mm: cleanup is_highmem() mm/hmm: add a test for cross device private faults selftests: add soft-dirty into run_vmtests.sh selftests: soft-dirty: add test for mprotect mm/mprotect: fix soft-dirty check in can_change_pte_writable() mm: memcontrol: fix potential oom_lock recursion deadlock mm/gup.c: fix formatting in check_and_migrate_movable_page() xfs: fail dax mount if reflink is enabled on a partition mm/memcontrol.c: remove the redundant updating of stats_flush_threshold userfaultfd: don't fail on unrecognized features hugetlb_cgroup: fix wrong hugetlb cgroup numa stat ... -
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linuxLinus Torvalds authored
Pull MTD updates from Richard Weinberger: "MTD core changes: - Dynamic partition support - Fix deadlock in sm_ftl - Various refcount fixes in maps, partitions and parser code - Integer overflow fixes in mtdchar - Support for Sercomm partitions NAND driver changes: - Clockrate fix for arasan - Add ATO25D1GA support - Double free fix for meson driver - Fix probe/remove methods in cafe NAND - Support unprotected spare data pages in qcom_nandc SPI NOR core changes: - move SECT_4K_PMC flag out of the core as it's a vendor specific flag - s/addr_width/addr_nbytes/g: address width means the number of IO lines used for the address, whereas in the code it is used as the number of address bytes. - do not change nor->addr_nbytes at SFDP parsing time. At the SFDP parsing time we should not change members of struct spi_nor, but instead fill members of struct spi_nor_flash_parameters which could later on be used by the callers. - track flash's internal address mode so that we can use 4B opcodes together with opcodes that don't have a 4B opcode correspondent. SPI NOR manufacturer drivers changes: - esmt: Rename "f25l32qa" flash name to "f25l32qa-2s". - micron-st: Skip FSR reading if SPI controller does not support it to allow flashes that support FSR to work even when attached to such SPI controllers. - spansion: Add s25hl-t/s25hs-t IDs and fixups" * tag 'mtd/for-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (53 commits) mtd: core: check partition before dereference mtd: spi-nor: fix spi_nor_spimem_setup_op() call in spi_nor_erase_{sector,chip}() mtd: spi-nor: spansion: Add s25hl-t/s25hs-t IDs and fixups mtd: spi-nor: spansion: Add local function to discover page size mtd: spi-nor: core: Track flash's internal address mode mtd: spi-nor: core: Return error code from set_4byte_addr_mode() mtd: spi-nor: Do not change nor->addr_nbytes at SFDP parsing time mtd: spi-nor: core: Shrink the storage size of the flash_info's addr_nbytes mtd: spi-nor: s/addr_width/addr_nbytes mtd: spi-nor: esmt: Use correct name of f25l32qa mtd: spi-nor: micron-st: Skip FSR reading if SPI controller does not support it MAINTAINERS: Use my kernel.org email mtd: rawnand: arasan: Fix clock rate in NV-DDR mtd: rawnand: arasan: Update NAND bus clock instead of system clock mtd: core: introduce of support for dynamic partitions dt-bindings: mtd: partitions: add additional example for qcom,smem-part dt-bindings: mtd: partitions: support label/name only partition mtd: spi-nor: move SECT_4K_PMC special handling mtd: dataflash: Add SPI ID table mtd: hyperbus: rpc-if: Fix RPM imbalance in probe error path ... -
git://git.kernel.org/pub/scm/linux/kernel/git/rw/umlLinus Torvalds authored
Pull UML updates from Richard Weinberger: - KASAN support for x86_64 - noreboot command line option, just like qemu's -no-reboot - Various fixes and cleanups * tag 'for-linus-5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml: um: include sys/types.h for size_t um: Replace to_phys() and to_virt() with less generic function names um: Add missing apply_returns() um: add "noreboot" command line option for PANIC_TIMEOUT=-1 setups um: include linux/stddef.h for __always_inline UML: add support for KASAN under x86_64 mm: Add PAGE_ALIGN_DOWN macro um: random: Don't initialise hwrng struct with zero um: remove unused mm_copy_segments um: remove unused variable um: Remove straying parenthesis um: x86: print RIP with symbol arch: um: Fix build for statically linked UML w/ constructors x86/um: Kconfig: Fix indentation um/drivers: Kconfig: Fix indentation um: Kconfig: Fix indentation
-
Linus Torvalds authored
Pull OpenRISC updates from Stafford Horne: "In this cycle we add PCI support to OpenRISC used in our new QEMU virt platform. The main updates from me include: - Kconfig updates to support OpenRISC PCI (just config now after the PCI cleanups I did on Bjorn's branch) - A new defconfig for the qemu virt platform. - Also there is one MAINTAINERS update. As I was working on the PCI series we kept getting bounces from Richard's old email address. I added this here; I am not sure how these are usually handled when the maintainer doesn't queue it themselves" * tag 'for-linus' of github.com:openrisc/linux: openrisc: io: Define iounmap argument as volatile MAINTAINERS: Update Richard Henderson's address openrisc: Add virt defconfig openrisc: Add pci bus support -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 SGX updates from Dave Hansen: "A set of x86/sgx changes focused on implementing the "SGX2" features, plus a minor cleanup: - SGX2 ISA support which makes enclave memory management much more dynamic. For instance, enclaves can now change enclave page permissions on the fly. - Removal of an unused structure member" * tag 'x86_sgx_for_v6.0-2022-08-03.1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (32 commits) x86/sgx: Drop 'page_index' from sgx_backing selftests/sgx: Page removal stress test selftests/sgx: Test reclaiming of untouched page selftests/sgx: Test invalid access to removed enclave page selftests/sgx: Test faulty enclave behavior selftests/sgx: Test complete changing of page type flow selftests/sgx: Introduce TCS initialization enclave operation selftests/sgx: Introduce dynamic entry point selftests/sgx: Test two different SGX2 EAUG flows selftests/sgx: Add test for TCS page permission changes selftests/sgx: Add test for EPCM permission changes Documentation/x86: Introduce enclave runtime management section x86/sgx: Free up EPC pages directly to support large page ranges x86/sgx: Support complete page removal x86/sgx: Support modifying SGX page type x86/sgx: Tighten accessible memory range after enclave initialization x86/sgx: Support adding of pages to an initialized enclave x86/sgx: Support restricting of enclave page permissions x86/sgx: Support VA page allocation without reclaiming x86/sgx: Export sgx_encl_page_alloc() ... -
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-genericLinus Torvalds authored
Pull asm-generic updates from Arnd Bergmann: "There are three independent sets of changes: - Sai Prakash Ranjan adds tracing support to the asm-generic version of the MMIO accessors, which is intended to help understand problems with device drivers and has been part of Qualcomm's vendor kernels for many years - A patch from Sebastian Siewior to rework the handling of IRQ stacks in softirqs across architectures, which is needed for enabling PREEMPT_RT - The last patch to remove the CONFIG_VIRT_TO_BUS option and some of the code behind that, after the last users of this old interface made it in through the netdev, scsi, media and staging trees" * tag 'asm-generic-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: uapi: asm-generic: fcntl: Fix typo 'the the' in comment arch/*/: remove CONFIG_VIRT_TO_BUS soc: qcom: geni: Disable MMIO tracing for GENI SE serial: qcom_geni_serial: Disable MMIO tracing for geni serial asm-generic/io: Add logging support for MMIO accessors KVM: arm64: Add a flag to disable MMIO trace for nVHE KVM lib: Add register read/write tracing support drm/meson: Fix overflow implicit truncation warnings irqchip/tegra: Fix overflow implicit truncation warnings coresight: etm4x: Use asm-generic IO memory barriers arm64: io: Use asm-generic high level MMIO accessors arch/*: Disable softirq stacks on PREEMPT_RT. -
git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds authored
Pull more ARM SoC updates from Arnd Bergmann: "These updates came in after I had already tagged the branches, but they still seem appropriate for 6.0 and most of them were part of linux-next through other trees. - The reset controller tree adds one new driver for the TI TPS380x power management chip and a few minor changes in other drivers - Apple M1 now has a DT entry for the NVMe controller after the driver was merged, and has a new mailing list in the MAINTAINERS file. - Fixes for USB on the Socionext Uniphier platforms and the network controller on Intel Cyclone5" * tag 'arm-late-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: arm64: dts: uniphier: Fix USB interrupts for PXs3 SoC ARM: dts: uniphier: Fix USB interrupts for PXs2 SoC arm64: dts: apple: t8103: Add ANS2 NVMe nodes reset: tps380x: Fix spelling mistake "Voltags" -> "Voltage" reset: tps380x: Add TPS380x device driver supprt dt-bindings: reset: Add TPS380x documentation dt-bindings: reset: renesas,rzg2l-usbphy-ctrl: Document RZ/G2UL USBPHY Control bindings ARM: dts: add EMAC AXI settings for Cyclone5 reset: reset-simple should depends on HAS_IOMEM Revert "reset: microchip-sparx5: allow building as a module" reset: a10sr: allow building under COMPILE_TEST reset: allow building of reset simple driver if expert config selected reset: microchip-sparx5: allow building as a module arm64: dts: apple: Re-parent ANS2 power domains MAINTAINERS: add ARM/APPLE MACHINE mailing list -
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linuxLinus Torvalds authored
Pull parisc updates from Helge Deller: "One real bugfix to change the io_pgetevents_time64() syscall to use the compat implementation when running in compat mode, otherwise the signed int32 parameters min_nr and nr will be incorrectly handled as unsigned int64 values. Other than that just small cleanups: - hardware database housekeeping and proper /proc/iomem output - add proper function exit code if probe functions fail - drop stale variables (pa_swapper_pg_lock) - drop unneccessary zero-initializations - typo fixes in comments" * tag 'for-5.20/parisc-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: Input: gscps2 - check return value of ioremap() in gscps2_probe() parisc: io_pgetevents_time64() needs compat syscall in 32-bit compat mode parisc: Drop zero variable initialisations in mm/init.c parisc: Do not initialise statics to 0 parisc: Check the return value of ioremap() in lba_driver_probe() parisc: Drop pa_swapper_pg_lock spinlock parisc: Fix comment typo in fault.c parisc: Fix device names in /proc/iomem parisc: Clean up names in hardware database
-
git://git.monstr.eu/linux-2.6-microblazeLinus Torvalds authored
Pull microblaze updates from Michal Simek: - Trivial comment fix - Remove HANDLE_DOMAIN_IRQ selection * tag 'microblaze-v5.20' of git://git.monstr.eu/linux-2.6-microblaze: microblaze: Fix some typos in comment arch: microblaze: Remove unused "select HANDLE_DOMAIN_IRQ"
-
git://git.kernel.org/pub/scm/linux/kernel/git/printk/linuxLinus Torvalds authored
Pull printk updates from Petr Mladek: - Allow reading kernel log in gdb even on 32 bits systems - More granular check of the buffer usage in printf selftest - Clang warning fix * tag 'printk-for-5.20-sane' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux: lib/test_printf.c: fix clang -Wformat warnings scripts/gdb: fix 'lx-dmesg' on 32 bits arch lib/test_printf.c: split write-beyond-buffer check in two
-
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-traceLinus Torvalds authored
Pull tracing updates from Steven Rostedt: - Runtime verification infrastructure This is the biggest change here. It introduces the runtime verification that is necessary for running Linux on safety critical systems. It allows for deterministic automata models to be inserted into the kernel that will attach to tracepoints, where the information on these tracepoints will move the model from state to state. If a state is encountered that does not belong to the model, it will then activate a given reactor, that could just inform the user or even panic the kernel (for which safety critical systems will detect and can recover from). - Two monitor models are also added: Wakeup In Preemptive (WIP - not to be confused with "work in progress"), and Wakeup While Not Running (WWNR). - Added __vstring() helper to the TRACE_EVENT() macro to replace several vsnprintf() usages that were all doing it wrong. - eprobes now can have their event autogenerated when the event name is left off. - The rest is various cleanups and fixes. * tag 'trace-v6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (50 commits) rv: Unlock on error path in rv_unregister_reactor() tracing: Use alignof__(struct {type b;}) instead of offsetof() tracing/eprobe: Show syntax error logs in error_log file scripts/tracing: Fix typo 'the the' in comment tracepoints: It is CONFIG_TRACEPOINTS not CONFIG_TRACEPOINT tracing: Use free_trace_buffer() in allocate_trace_buffers() tracing: Use a struct alignof to determine trace event field alignment rv/reactor: Add the panic reactor rv/reactor: Add the printk reactor rv/monitor: Add the wwnr monitor rv/monitor: Add the wip monitor rv/monitor: Add the wip monitor skeleton created by dot2k Documentation/rv: Add deterministic automata instrumentation documentation Documentation/rv: Add deterministic automata monitor synthesis documentation tools/rv: Add dot2k Documentation/rv: Add deterministic automaton documentation tools/rv: Add dot2c Documentation/rv: Add a basic documentation rv/include: Add instrumentation helper functions rv/include: Add deterministic automata monitor definition via C macros ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-traceLinus Torvalds authored
Pull real time analysis tool (rtla) updates from Steven Rostedt: - Fix a double free - Define syscall numbers for RISCV - Fix Makefile when called from -C tools - Use calloc() to check for memory allocation failures * tag 'trace-rtla-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: rtla: Define syscall numbers for riscv rtla: Fix double free rtla: Fix Makefile when called from -C tools/ rtla/utils: Use calloc and check the potential memory allocation failure
-
Arnd Bergmann authored
Two bugfixes that came in to update the MAINTAINERS file and fix an issue with USB on the uniphier platform. * arm/fixes: arm64: dts: uniphier: Fix USB interrupts for PXs3 SoC ARM: dts: uniphier: Fix USB interrupts for PXs2 SoC MAINTAINERS: add ARM/APPLE MACHINE mailing list
-
git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds authored
Pull xfs updates from Darrick Wong: "The biggest changes for this release are the log scalability improvements, lockless lookups for the buffer cache, and making the attr fork a permanent part of the incore inode in preparation for directory parent pointers. There's also a bunch of bug fixes that have accumulated since -rc5. I might send you a second pull request with some more bug fixes that I'm still working on. Once the merge window ends, I will hand maintainership back to Dave Chinner until the 6.1-rc1 release so that I can conduct the design review for the online fsck feature, and try to get it merged. Summary: - Improve scalability of the XFS log by removing spinlocks and global synchronization points. - Add security labels to whiteout inodes to match the other filesystems. - Clean up per-ag pointer passing to simplify call sites. - Reduce verifier overhead by precalculating more AG geometry. - Implement fast-path lockless lookups in the buffer cache to reduce spinlock hammering. - Make attr forks a permanent part of the inode structure to fix a UAF bug and because most files these days tend to have security labels and soon will have parent pointers too. - Clean up XFS_IFORK_Q usage and give it a better name. - Fix more UAF bugs in the xattr code. - SOB my tags. - Fix some typos in the timestamp range documentation. - Fix a few more memory leaks. - Code cleanups and typo fixes. - Fix an unlocked inode fork pointer access in getbmap" * tag 'xfs-5.20-merge-6' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (61 commits) xfs: delete extra space and tab in blank line xfs: fix NULL pointer dereference in xfs_getbmap() xfs: Fix typo 'the the' in comment xfs: Fix comment typo xfs: don't leak memory when attr fork loading fails xfs: fix for variable set but not used warning xfs: xfs_buf cache destroy isn't RCU safe xfs: delete unnecessary NULL checks xfs: fix comment for start time value of inode with bigtime enabled xfs: fix use-after-free in xattr node block inactivation xfs: lockless buffer lookup xfs: remove a superflous hash lookup when inserting new buffers xfs: reduce the number of atomic when locking a buffer after lookup xfs: merge xfs_buf_find() and xfs_buf_get_map() xfs: break up xfs_buf_find() into individual pieces xfs: add in-memory iunlink log item xfs: add log item precommit operation xfs: combine iunlink inode update functions xfs: clean up xfs_iunlink_update_inode() xfs: double link the unlinked inode list ... -
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4Linus Torvalds authored
Pull ext4 updates from Ted Ts'o: "Add new ioctls to set and get the file system UUID in the ext4 superblock and improved the performance of the online resizing of file systems with bigalloc enabled. Fixed a lot of bugs, in particular for the inline data feature, potential races when creating and deleting inodes with shared extended attribute blocks, and the handling of directory blocks which are corrupted" * tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (37 commits) ext4: add ioctls to get/set the ext4 superblock uuid ext4: avoid resizing to a partial cluster size ext4: reduce computation of overhead during resize jbd2: fix assertion 'jh->b_frozen_data == NULL' failure when journal aborted ext4: block range must be validated before use in ext4_mb_clear_bb() mbcache: automatically delete entries from cache on freeing mbcache: Remove mb_cache_entry_delete() ext2: avoid deleting xattr block that is being reused ext2: unindent codeblock in ext2_xattr_set() ext2: factor our freeing of xattr block reference ext4: fix race when reusing xattr blocks ext4: unindent codeblock in ext4_xattr_block_set() ext4: remove EA inode entry from mbcache on inode eviction mbcache: add functions to delete entry if unused mbcache: don't reclaim used entries ext4: make sure ext4_append() always allocates new block ext4: check if directory block is within i_size ext4: reflect mb_optimize_scan value in options file ext4: avoid remove directory when directory is corrupted ext4: aligned '*' in comments ...
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block driver updates from Jens Axboe: - NVMe pull requests via Christoph: - add support for In-Band authentication (Hannes Reinecke) - handle the persistent internal error AER (Michael Kelley) - use in-capsule data for TCP I/O queue connect (Caleb Sander) - remove timeout for getting RDMA-CM established event (Israel Rukshin) - misc cleanups (Joel Granados, Sagi Grimberg, Chaitanya Kulkarni, Guixin Liu, Xiang wangx) - use command_id instead of req->tag in trace_nvme_complete_rq() (Bean Huo) - various fixes for the new authentication code (Lukas Bulwahn, Dan Carpenter, Colin Ian King, Chaitanya Kulkarni, Hannes Reinecke) - small cleanups (Liu Song, Christoph Hellwig) - restore compat_ioctl support (Nick Bowler) - make a nvmet-tcp workqueue lockdep-safe (Sagi Grimberg) - enable generic interface (/dev/ngXnY) for unknown command sets (Joel Granados, Christoph Hellwig) - don't always build constants.o (Christoph Hellwig) - print the command name of aborted commands (Christoph Hellwig) - MD pull requests via Song: - Improve raid5 lock contention, by Logan Gunthorpe. - Misc fixes to raid5, by Logan Gunthorpe. - Fix race condition with md_reap_sync_thread(), by Guoqing Jiang. - Fix potential deadlock with raid5_quiesce and raid5_get_active_stripe, by Logan Gunthorpe. - Refactoring md_alloc(), by Christoph" - Fix md disk_name lifetime problems, by Christoph Hellwig - Convert prepare_to_wait() to wait_woken() api, by Logan Gunthorpe; - Fix sectors_to_do bitmap issue, by Logan Gunthorpe. - Work on unifying the null_blk module parameters and configfs API (Vincent) - drbd bitmap IO error fix (Lars) - Set of rnbd fixes (Guoqing, Md Haris) - Remove experimental marker on bcache async device registration (Coly) - Series from cleaning up the bio splitting (Christoph) - Removal of the sx8 block driver. This hardware never really widespread, and it didn't receive a lot of attention after the initial merge of it back in 2005 (Christoph) - A few fixes for s390 dasd (Eric, Jiang) - Followup set of fixes for ublk (Ming) - Support for UBLK_IO_NEED_GET_DATA for ublk (ZiyangZhang) - Fixes for the dio dma alignment (Keith) - Misc fixes and cleanups (Ming, Yu, Dan, Christophe * tag 'for-5.20/block-2022-08-04' of git://git.kernel.dk/linux-block: (136 commits) s390/dasd: Establish DMA alignment s390/dasd: drop unexpected word 'for' in comments ublk_drv: add support for UBLK_IO_NEED_GET_DATA ublk_cmd.h: add one new ublk command: UBLK_IO_NEED_GET_DATA ublk_drv: cleanup ublksrv_ctrl_dev_info ublk_drv: add SET_PARAMS/GET_PARAMS control command ublk_drv: fix ublk device leak in case that add_disk fails ublk_drv: cancel device even though disk isn't up block: fix leaking page ref on truncated direct io block: ensure bio_iov_add_page can't fail block: ensure iov_iter advances for added pages drivers:md:fix a potential use-after-free bug md/raid5: Ensure batch_last is released before sleeping for quiesce md/raid5: Move stripe_request_ctx up md/raid5: Drop unnecessary call to r5c_check_stripe_cache_usage() md/raid5: Make is_inactive_blocked() helper md/raid5: Refactor raid5_get_active_stripe() block: pass struct queue_limits to the bio splitting helpers block: move bio_allowed_max_sectors to blk-merge.c block: move the call to get_max_io_size out of blk_bio_segment_split ... -
git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds authored
Pull rdma updates from Jason Gunthorpe: "This cycle we got a new RDMA driver "ERDMA" for the Alibaba cloud environment. Otherwise the changes are dominated by rxe fixes. There is another RDMA driver on the list that might get merged next cycle, 'MANA' for the Azure cloud environment. Summary: - Bug fixes and small features for irdma, hns, siw, qedr, hfi1, mlx5 - General spelling/grammer fixes - rdma cm can follow changes in neighbours for control packets - Significant amounts of rxe fixes and spec compliance changes - Use the modern NAPI API - Use the bitmap API instead of open coding - Performance improvements for rtrs - Add the ERDMA driver for Alibaba cloud - Fix a use after free bug in SRP" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (99 commits) RDMA/ib_srpt: Unify checking rdma_cm_id condition in srpt_cm_req_recv() RDMA/rxe: Fix error unwind in rxe_create_qp() RDMA/mlx5: Add missing check for return value in get namespace flow RDMA/rxe: Split qp state for requester and completer RDMA/rxe: Generate error completion for error requester QP state RDMA/rxe: Update wqe_index for each wqe error completion RDMA/srpt: Fix a use-after-free RDMA/srpt: Introduce a reference count in struct srpt_device RDMA/srpt: Duplicate port name members IB/qib: Fix repeated "in" within comments RDMA/erdma: Add driver to kernel build environment RDMA/erdma: Add the ABI definitions RDMA/erdma: Add the erdma module RDMA/erdma: Add connection management (CM) support RDMA/erdma: Add verbs implementation RDMA/erdma: Add verbs header file RDMA/erdma: Add event queue implementation RDMA/erdma: Add cmdq implementation RDMA/erdma: Add main include file RDMA/erdma: Add the hardware related definitions ...
-
Dan Carpenter authored
Unlock the "rv_interface_lock" mutex before returning. Link: https://lkml.kernel.org/r/YuvYzNfGMgV+PIhd@kili Fixes: 04acadcb ("rv: Add runtime reactors interface") Signed-off-by:
Steven Rostedt (Google) <rostedt@goodmis.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI updates from James Bottomley: "Updates to the usual drivers (ufs, qla2xx, target, lpfc, smartpqi, mpi3mr). The main driver change that might cause issues on down the road is the conversion of some of our oldest surviving drivers to the DMA API (should only affect m68k). The only major core change is the rework of async resume; the rest are either completely trivial or for updating deprecated APIs" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (195 commits) scsi: target: Remove XDWRITEREAD emulated support scsi: megaraid: Remove the static variable initialisation scsi: ch: Do not initialise statics to 0 scsi: ufs: core: Fix spelling mistake "Cannnot" -> "Cannot" scsi: target: iscsi: Do not require target authentication scsi: target: iscsi: Allow AuthMethod=None scsi: target: iscsi: Support base64 in CHAP scsi: target: iscsi: Add support for extended CDB AHS scsi: ufs: dt-bindings: Add SC8280XP binding scsi: target: iscsi: Fix clang -Wformat warnings scsi: ufs: core: Read device property for ref clock scsi: libsas: Resume SAS host for phy reset or enable via sysfs scsi: hisi_sas: Modify v3 HW SATA completion error processing scsi: hisi_sas: Relocate DMA unmap of SMP task scsi: hisi_sas: Remove unnecessary variable to hold DMA map elements scsi: hisi_sas: Call hisi_sas_slave_configure() from slave_configure_v3_hw() scsi: mpi3mr: Delete a stray tab scsi: mpi3mr: Unlock on error path scsi: mpi3mr: Reduce VD queue depth on detecting throttling scsi: mpi3mr: Resource Based Metering ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmcLinus Torvalds authored
Pull MMC updates from Ulf Hansson: "MMC core: - Add support for the asynchronous SDIO wakeup interrupts - Skip redundant evaluation of eMMC HS400 caps when no-MMC-cap - Add support to store error stats from host drivers - Extend debugfs to show error stats from host drivers - Add single I/O read support in the recovery path for 4k sector cards MMC host: - dw_mmc-exynos: Convert corresponding DT bindings to the dtschema - dw_mmc-rockchip: Add support for the Rockchip RV1126 variant - mmc_spi: Convert corresponding DT bindings to the dtschema - mtk-sd: Extend support for interrupts/pinctrls for SDIO low-power mode - mtk-sd: Add support for SDIO wake irqs - mtk-sd: Add support for the Mediatek MT8188 variant - renesas_sdhi: Drop redundant manual tap correction for newer SoCs - renesas_sdhi: Add support for the R-Car S4-8 and generic Gen4 variants - sdhci/cqhci: Add support to capture stats from host errors - sdhci-brcmstb: Add ability to increase max clock rate for SDIO on 72116b0 - sdhci-msm: Add support for the MSM8998 and SM8450 variant - sdhci-of-at91: Fixup UHS-I mode by rewriting of MC1R - sdhci-of-dwcmshc: Add support for the Rockchip rk3588 variant - sdhci-of-dwcmshc: Enable reset support for the Rockchip variants - sdhci-pci-gli: Improve I/O read/write performance for GL9763E - sdhci-s3c: Convert corresponding DT bindings to the dtschema - tmio: Avoid glitches when resetting MEMSTICK core: - A couple of minor fixes and cleanups" * tag 'mmc-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (61 commits) mmc: mediatek: add support for SDIO eint wakup IRQ mmc: core: Add support for SDIO wakeup interrupt dt-bindings: mmc: mtk-sd: extend interrupts and pinctrls properties dt-bindings: mmc: rockchip-dw-mshc: Document Rockchip RV1126 mmc: renesas_sdhi: newer SoCs don't need manual tap correction mmc: cavium-thunderx: Add of_node_put() when breaking out of loop mmc: cavium-octeon: Add of_node_put() when breaking out of loop mmc: core: quirks: Add of_node_put() when breaking out of loop mmc: sdhci-brcmstb: use clk_get_rate(base_clk) in PM resume dt-bindings: mmc: sdhci-msm: Document the SM8450 compatible mmc: sdhci-msm: drop redundant of_device_id entries dt-bindings: mmc: sdhci-msm: add MSM8998 mmc: block: Add single read for 4k sector cards mmc: mxcmmc: Use mmc_card_sdio macro mmc: core: Use mmc_card_* macro and add a new for the sd_combo type dt-bindings: mmc: sdhci-msm: constrain reg-names per variants dt-bindings: mmc: sdhci-msm: fix reg-names entries dt-bindings: mmc: Add compatible for MediaTek MT8188 dt-bindings: mmc: sdhci-msm: document resets mmc: sdhci-of-at91: fix set_uhs_signaling rewriting of MC1R ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds authored
Pull pci updates from Bjorn Helgaas: "Enumeration: - Consolidate duplicated 'next function' scanning and extend to allow 'isolated functions' on s390, similar to existing hypervisors (Niklas Schnelle) Resource management: - Implement pci_iobar_pfn() for sparc, which allows us to remove the sparc-specific pci_mmap_page_range() and pci_mmap_resource_range(). This removes the ability to map the entire PCI I/O space using /proc/bus/pci, but we believe that's already been broken since v2.6.28 (Arnd Bergmann) - Move common PCI definitions to asm-generic/pci.h and rework others to be be more specific and more encapsulated in arches that need them (Stafford Horne) Power management: - Convert drivers to new *_PM_OPS macros to avoid need for '#ifdef CONFIG_PM_SLEEP' or '__maybe_unused' (Bjorn Helgaas) Virtualization: - Add ACS quirk for Broadcom BCM5750x multifunction NICs that isolate the functions but don't advertise an ACS capability (Pavan Chebbi) Error handling: - Clear PCI Status register during enumeration in case firmware left errors logged (Kai-Heng Feng) - When we have native control of AER, enable error reporting for all devices that support AER. Previously only a few drivers enabled this (Stefan Roese) - Keep AER error reporting enabled for switches. Previously we enabled this during enumeration but immediately disabled it (Stefan Roese) - Iterate over error counters instead of error strings to avoid printing junk in AER sysfs counters (Mohamed Khalfella) ASPM: - Remove pcie_aspm_pm_state_change() so ASPM config changes, e.g., via sysfs, are not lost across power state changes (Kai-Heng Feng) Endpoint framework: - Don't stop an EPC when unbinding an EPF from it (Shunsuke Mie) Endpoint embedded DMA controller driver: - Simplify and clean up support for the DesignWare embedded DMA (eDMA) controller (Frank Li, Serge Semin) Broadcom STB PCIe controller driver: - Avoid config space accesses when link is down because we can't recover from the CPU aborts these cause (Jim Quinlan) - Look for power regulators described under Root Ports in DT and enable them before scanning the secondary bus (Jim Quinlan) - Disable/enable regulators in suspend/resume (Jim Quinlan) Freescale i.MX6 PCIe controller driver: - Simplify and clean up clock and PHY management (Richard Zhu) - Disable/enable regulators in suspend/resume (Richard Zhu) - Set PCIE_DBI_RO_WR_EN before writing DBI registers (Richard Zhu) - Allow speeds faster than Gen2 (Richard Zhu) - Make link being down a non-fatal error so controller probe doesn't fail if there are no Endpoints connected (Richard Zhu) Loongson PCIe controller driver: - Add ACPI and MCFG support for Loongson LS7A (Huacai Chen) - Avoid config reads to non-existent LS2K/LS7A devices because a hardware defect causes machine hangs (Huacai Chen) - Work around LS7A integrated devices that report incorrect Interrupt Pin values (Jianmin Lv) Marvell Aardvark PCIe controller driver: - Add support for AER and Slot capability on emulated bridge (Pali Rohár) MediaTek PCIe controller driver: - Add Airoha EN7532 to DT binding (John Crispin) - Allow building of driver for ARCH_AIROHA (Felix Fietkau) MediaTek PCIe Gen3 controller driver: - Print decoded LTSSM state when the link doesn't come up (Jianjun Wang) NVIDIA Tegra194 PCIe controller driver: - Convert DT binding to json-schema (Vidya Sagar) - Add DT bindings and driver support for Tegra234 Root Port and Endpoint mode (Vidya Sagar) - Fix some Root Port interrupt handling issues (Vidya Sagar) - Set default Max Payload Size to 256 bytes (Vidya Sagar) - Fix Data Link Feature capability programming (Vidya Sagar) - Extend Endpoint mode support to devices beyond Controller-5 (Vidya Sagar) Qualcomm PCIe controller driver: - Rework clock, reset, PHY power-on ordering to avoid hangs and improve consistency (Robert Marko, Christian Marangi) - Move pipe_clk handling to PHY drivers (Dmitry Baryshkov) - Add IPQ60xx support (Selvam Sathappan Periakaruppan) - Allow ASPM L1 and substates for 2.7.0 (Krishna chaitanya chundru) - Add support for more than 32 MSI interrupts (Dmitry Baryshkov) Renesas R-Car PCIe controller driver: - Convert DT binding to json-schema (Herve Codina) - Add Renesas RZ/N1D (R9A06G032) to rcar-gen2 DT binding and driver (Herve Codina) Samsung Exynos PCIe controller driver: - Fix phy-exynos-pcie driver so it follows the 'phy_init() before phy_power_on()' PHY programming model (Marek Szyprowski) Synopsys DesignWare PCIe controller driver: - Simplify and clean up the DWC core extensively (Serge Semin) - Fix an issue with programming the ATU for regions that cross a 4GB boundary (Serge Semin) - Enable the CDM check if 'snps,enable-cdm-check' exists; previously we skipped it if 'num-lanes' was absent (Serge Semin) - Allocate a 32-bit DMA-able page to be MSI target instead of using a driver data structure that may not be addressable with 32-bit address (Will McVicker) - Add DWC core support for more than 32 MSI interrupts (Dmitry Baryshkov) Xilinx Versal CPM PCIe controller driver: - Add DT binding and driver support for Versal CPM5 Gen5 Root Port (Bharat Kumar Gogada)" * tag 'pci-v5.20-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (150 commits) PCI: imx6: Support more than Gen2 speed link mode PCI: imx6: Set PCIE_DBI_RO_WR_EN before writing DBI registers PCI: imx6: Reformat suspend callback to keep symmetric with resume PCI: imx6: Move the imx6_pcie_ltssm_disable() earlier PCI: imx6: Disable clocks in reverse order of enable PCI: imx6: Do not hide PHY driver callbacks and refine the error handling PCI: imx6: Reduce resume time by only starting link if it was up before suspend PCI: imx6: Mark the link down as non-fatal error PCI: imx6: Move regulator enable out of imx6_pcie_deassert_core_reset() PCI: imx6: Turn off regulator when system is in suspend mode PCI: imx6: Call host init function directly in resume PCI: imx6: Disable i.MX6QDL clock when disabling ref clocks PCI: imx6: Propagate .host_init() errors to caller PCI: imx6: Collect clock enables in imx6_pcie_clk_enable() PCI: imx6: Factor out ref clock disable to match enable PCI: imx6: Move imx6_pcie_clk_disable() earlier PCI: imx6: Move imx6_pcie_enable_ref_clk() earlier PCI: imx6: Move PHY management functions together PCI: imx6: Move imx6_pcie_grp_offset(), imx6_pcie_configure_type() earlier PCI: imx6: Convert to NOIRQ_SYSTEM_SLEEP_PM_OPS() ...
-
