Instead of calling put_device(&adev->dev) where adev is a pointer
to an ACPI device, use specific call, i.e. acpi_dev_put().

Also move it out of the conditional to make it more visible in case
some other code will be added which may use that pointer. We need
to keep a reference as long as we use the pointer.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230102203037.16120-4-andriy.shevchenko@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Instead of calling put_device(&adev->dev) where adev is a pointer
to an ACPI device, use specific call, i.e. acpi_dev_put().

Also move it out of the conditional to make it more visible in case
some other code will be added which may use that pointer. We need
to keep a reference as long as we use the pointer.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230102203037.16120-3-andriy.shevchenko@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Instead of calling put_device(&adev->dev) where adev is a pointer
to an ACPI device, use specific call, i.e. acpi_dev_put().

Also move it out of the conditional to make it more visible in case
some other code will be added which may use that pointer. We need
to keep a reference as long as we use the pointer.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230102203037.16120-2-andriy.shevchenko@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Instead of calling put_device(&adev->dev) where adev is a pointer
to an ACPI device, use specific call, i.e. acpi_dev_put().

Also move it out of the conditional to make it more visible in case
some other code will be added which may use that pointer. We need
to keep a reference as long as we use the pointer.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230102203037.16120-1-andriy.shevchenko@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

The variable becomes useless since we moved the snd_soc_jack
structure from a static array to sof_hdmi_pcm structure.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230103073704.722027-1-brent.lu@intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Non-functional cleanup:
1. Drop unneeded quotes form $ref,
2. Example: Use generic node name, use define for GPIO flag, adjust
   indentation to consistent 4-space style.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20221224154210.43356-2-krzysztof.kozlowski@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Both DTS (SM8250 and SM8350 based Sony Xperia boards) and Linux driver
mention interrupt, so allow it to fix:

  sm8350-sony-xperia-sagami-pdx215.dtb: cs35l41@41: Unevaluated properties are not allowed ('interrupt-parent', 'interrupts' were unexpected)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20221224154210.43356-1-krzysztof.kozlowski@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Merge series from Claudiu Beznea <claudiu.beznea@microchip.com>:

The following series adds runtime PM and suspend to RAM features for
mchp-pdmc driver.

Along with it 2 cleanup patches were added:
- patch 1/4: use vendor,device.yaml file format for Microchip AT91 ASoC
  bindings
- patch 4/4: use FIELD_PREP() in mchp-spdiftx.c

Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:

This series will extend the IPC ops optionality to cover it up to the existence
of the top level ipc pointer itself. There is no functionality change.

The reason for the extended optionality is that we have "DSPless"
debug/development support coming up (currently it is in SOF's topic/sof-dev
stable branch) initially supporting Intel's HDA platforms.

As the name suggests, in this mode the DSP is completely ignored by the linux
driver stack (no firmware loaded, only using HDA directly).

The DSPless mode is aimed to help us to verify our Linux stack on new platforms
where the firmware is not yet in the state that we can reliably use it, but the
hardware and programming flows can be tested already.
There is no plan to make DSPless a production target for SOF Linux stack.

While this is preparatory series aimed to unblock the DSPless support, it has
been integrated into sof-dev separately and we have lots of new features
depending on it (went in between this set and the DSPless support).

I still have some minor tasks to complete for the DSPless to make it a bit more
versatile, but I don't want to block other, stable features for upstreaming.

Merge series from Uwe Kleine-König <u.kleine-koenig@pengutronix.de>:

Hello,

this patch series removes all platform remove functions that only return
zero below sound/soc. There is no reason to have these, as the only
caller is platform core code doing:

        if (drv->remove) {
                int ret = drv->remove(dev);

                ...
        }

(in platform_remove()) and so having no remove function is both
equivalent and simpler.

Merge series from Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>:

Some devices like DMIC don't expose native controls or need volume limit
due to possible HW damage. Add support for volume controls allowing to
change volume level in DSP. Maximum volume level is imposed by the
topology file which defines given path.

Move irq handler registration prior to platform device creation logic.
This will avoid irq handling missing scenario when platform device
raise interrrupts during it's probe sequence.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20221221172855.1618766-4-Vijendar.Mukunda@amd.comSigned-off-by: Mark Brown <broonie@kernel.org>

Instead of using hard coded index value for platform device index,
retrieve the device index based on platform devices created.
In PDM config case, ACP PCI driver retrieves dev index from
pdm_dev_index variable.
This will avoid overhead when multiple endpoint combinations
support is added later.
platform device index will vary based on audio endpoint
configuration.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20221221172855.1618766-3-Vijendar.Mukunda@amd.comSigned-off-by: Mark Brown <broonie@kernel.org>

Refactor platform device creation implementation.
Based on platform dev count and pdev mask create platform devices.
Use common API to fill platform dev information.
Use pdev count variable in remove callback for unregistering
platform devices.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20221221172855.1618766-2-Vijendar.Mukunda@amd.comSigned-off-by: Mark Brown <broonie@kernel.org>

Implement API to retrieve acp device config and calculate platform
device count and dev mask for platform device node creation.

Currently for DMIC configuration, mask and dev count are calculated.
Same api will be used to extend support for different ACP device
configurations.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20221221172855.1618766-1-Vijendar.Mukunda@amd.comSigned-off-by: Mark Brown <broonie@kernel.org>

A remove callback just returning 0 is equivalent to no remove callback
at all. So drop the useless function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20221212174737.3740223-1-u.kleine-koenig@pengutronix.deSigned-off-by: Mark Brown <broonie@kernel.org>

Depending on HW design, som boards may expect mono differential output
on LOUT. Describe a property that enables it.
Signed-off-by: Ondrej Jirman <megi@xff.cz>
Signed-off-by: Jarrah Gosbell <kernel@undef.tools>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221209105621.39237-2-kernel@undef.toolsSigned-off-by: Mark Brown <broonie@kernel.org>

LOUT output can produce either single-ended stereo signals, or mono
differential signal. Some applications are wired to use LOUT in mono
differential mode. Allow to configure it via device property.
Signed-off-by: Ondrej Jirman <megi@xff.cz>
Signed-off-by: Jarrah Gosbell <kernel@undef.tools>
Link: https://lore.kernel.org/r/20221209105621.39237-1-kernel@undef.toolsSigned-off-by: Mark Brown <broonie@kernel.org>

The wm8940 provides the chip ID information via I2C. In this
patch this information is read and if not matching expected
value, the probe function is aborted.

This prevents from using (i.e. inserting) other wm89* modules
which use the same I2C bus address.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20221216094624.3849278-3-lukma@denx.deSigned-off-by: Mark Brown <broonie@kernel.org>

This patch enables support for internal wm8940's PLL and proper
divider to set proper value for 256x fs clock.

This approach is more flexible and replaces hardcoded clock
values and makes the codec work with the simple-card driver.
Card drivers calling set_pll() and set_clkdiv() directly are
unaffected.

For the reference - code in this commit is based on:
51b2bb3f
("ASoC: wm8974: configure pll and mclk divider automatically")
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20221216094624.3849278-2-lukma@denx.deSigned-off-by: Mark Brown <broonie@kernel.org>

The lack of platform data in the contemporary Linux
shall not be the reason to display warnings to the
kernel logs.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20221216094624.3849278-1-lukma@denx.deSigned-off-by: Mark Brown <broonie@kernel.org>

Enable DSP cache for ACP memory
Signed-off-by: V sujith kumar Reddy <Vsujithkumar.Reddy@amd.com>
Link: https://lore.kernel.org/r/20221213071640.3038853-1-Vsujithkumar.Reddy@amd.comSigned-off-by: Mark Brown <broonie@kernel.org>

This adds the DAI mono mode support and set the frame width to 32
Signed-off-by: Piotr Wojtaszczyk <piotr.wojtaszczyk@timesys.com>
Tested-by: David Rau <David.Rau.opensource@dm.renesas.com>
Signed-off-by: David Rau <David.Rau.opensource@dm.renesas.com>
Link: https://lore.kernel.org/r/20221214044058.6289-1-David.Rau.opensource@dm.renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>

DSP SRAM is not used for audio shared buffer between host and DSP so
TOTAL_SIZE_SHARED_SRAM_FROM_TAIL is zero. Remove the definition and
redundant comparison to fix coverity "unsigned compared against 0".
Signed-off-by: YC Hung <yc.hung@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angeloigoacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20221215061046.16934-1-yc.hung@mediatek.comSigned-off-by: Mark Brown <broonie@kernel.org>

The error "Conflict in bytes vs. priv size." is too brief. With
the printed sizes it's a lot easier to find the size issue in
for binary control if such happens.
Signed-off-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20221216115350.28260-1-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Convert bindings for TI's TLV320AIC3x audio codecs to dtschema.

The following properties are still found in some old dts files, but will
be ignored by the driver:
- adc-settle-ms
- port
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221221145216.11400-1-j-luthra@ti.comSigned-off-by: Mark Brown <broonie@kernel.org>

The sof_debug value is set by the user, developer intentionally.
To save time on figuring out what value has been passed to the kernel by
the user, developer, print it out if it is not 0.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20221216115435.28427-1-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Convert the Analog Devices ADAU7002 Stereo PDM-to-I2S/TDM Converter
bindings to DT schema.  During the conversion, add properties already
used by DTS (sc7180-trogdor-coachz.dts) and Linux driver:
1. wakeup-delay-ms,
2. sound-dai-cells (via referencing dai-common.yaml).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221209175947.335319-1-krzysztof.kozlowski@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

This patch adds another jack detection mode for JD2 with an external resistor of 100k.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://lore.kernel.org/r/20221223055846.3285-1-shumingf@realtek.comSigned-off-by: Mark Brown <broonie@kernel.org>

Use FIELD_PREP() in macro definitions.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20221213112851.89212-5-claudiu.beznea@microchip.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add support for suspend to RAM by re-aranging the lines in switch..case
from mchp_pdmc_trigger() and saving/restoring the enabled interrupts. These
are necessary as AT91 devices has a special power saving mode (called
backup and self-refresh) where most of the SoC parts are powered off
and thus we need to reconfigure the PDMC on resume.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20221213112851.89212-4-claudiu.beznea@microchip.comSigned-off-by: Mark Brown <broonie@kernel.org>

Implement clock power saving taking advantage of runtime PM infrastructure.
This simplifies the code and allow using the same infrastructure for
suspend to RAM functionalities.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20221213112851.89212-3-claudiu.beznea@microchip.comSigned-off-by: Mark Brown <broonie@kernel.org>

Use the following syntax for Microchip ASoC YAML files:
vendor,device.yaml
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221213112851.89212-2-claudiu.beznea@microchip.comSigned-off-by: Mark Brown <broonie@kernel.org>

Handle creation of peakvol module in FW. When peakvol module is created
it retrieves actual value from kcontrol and sends it to FW as part of
configuration data.
Co-authored-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20221214185500.3896902-5-amadeuszx.slawinski@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add callback to handle loading of kcontrol and linking it to active
widget. In order to link kcontrol to specific modules add additional
field to module data, as well as specify control id in kcontrol data.
Co-authored-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20221214185500.3896902-4-amadeuszx.slawinski@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

To make introduced peakvol module useful from userspace perspective,
expose ALSA controls allowing DSP volume modification. These provide
even more granular control over volume but are also the only way to
modify volume for devices devoid of codec kcontrols e.g.: DMIC.
Co-authored-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20221214185500.3896902-3-amadeuszx.slawinski@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Peakvol module allows for setting and obtaining DSP volume as well as
modifying shape and duration at which volume actually changes. Add IPC
messages to expose those capabilities.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20221214185500.3896902-2-amadeuszx.slawinski@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

A remove callback just returning 0 is equivalent to no remove callback
at all. So drop the useless function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20221212205406.3771071-16-u.kleine-koenig@pengutronix.deSigned-off-by: Mark Brown <broonie@kernel.org>

A remove callback just returning 0 is equivalent to no remove callback
at all. So drop the useless function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20221212205406.3771071-15-u.kleine-koenig@pengutronix.deSigned-off-by: Mark Brown <broonie@kernel.org>

A remove callback just returning 0 is equivalent to no remove callback
at all. So drop the useless function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20221212205406.3771071-14-u.kleine-koenig@pengutronix.deSigned-off-by: Mark Brown <broonie@kernel.org>