They are a handful of places in the code that register a die_notifier
as a catch all in case no claims the NMI.  Unfortunately, they trigger
on events like DIE_NMI and DIE_NMI_IPI, which depending on when they
registered may collide with other handlers that have the ability to
determine if the NMI is theirs or not.

The function unknown_nmi_error() makes one last effort to walk the
die_chain when no one else has claimed the NMI before spitting out
messages that the NMI is unknown.

This is a better spot for these devices to execute any code without
colliding with the other handlers.

The two drivers modified are only compiled on x86 arches I believe, so
they shouldn't be affected by other arches that may not have
DIE_NMIUNKNOWN defined.
Signed-off-by: Don Zickus <dzickus@redhat.com>
Cc: Russ Anderson <rja@sgi.com>
Cc: Corey Minyard <minyard@acm.org>
Cc: openipmi-developer@lists.sourceforge.net
Cc: dann frazier <dannf@hp.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1294348732-15030-3-git-send-email-dzickus@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Replace the NMI related magic numbers with symbol constants.

Memory parity error is only valid for IBM PC-AT, newer machine use
bit 7 (0x80) of 0x61 port for PCI SERR. While memory error is usually
reported via MCE. So corresponding function name and kernel log string
is changed.

But on some machines, PCI SERR line is still used to report memory
errors. This is used by EDAC, so corresponding EDAC call is reserved.
Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Don Zickus <dzickus@redhat.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1294348732-15030-2-git-send-email-dzickus@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Adds perf_event_time() to try and centralize access to event
timing and in particular ctx->time. Prepares for cgroup support.
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <4d22059c.122ae30a.5e0e.ffff8b8b@mx.google.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Replace all occurrences of:
	event->cpu != -1 && event->cpu == smp_processor_id()
by a call to:
	event_filter_match(event)

This makes the code more consistent and will make the cgroup
patch smaller.
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <4d220593.2308e30a.48c5.ffff8ae9@mx.google.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

In particular this patch move perf_event_exit_task() before
cgroup_exit() to allow for cgroup support. The cgroup_exit()
function detaches the cgroups attached to a task.

Other movements include hoisting some definitions and inlines
at the top of perf_event.c
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <4d22058b.cdace30a.4657.ffff95b1@mx.google.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Since commit 69aad6f1(perf tools: Introduce event selectors), only
perf_event_attr::type and ::config are passed to event selector, which
makes perf tool not work correctly.

For example, PEBS does not work because perf_event_attr::precise_ip is
not passed to the syscall.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <1294369869.20563.19.camel@minggr.sh.intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

It seems that some gcc versions build by default with frame pointers
and some others omit them.

Just build the tools with frame pointers as the callchains can be an
important part of the perf workflow.

Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
LKML-Reference: <1294325513-14276-3-git-send-email-fweisbec@gmail.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

I found when specifying all tracepoints with -e to one of subcommand,
such as 'stat', the program will trigger a buffer overflow error, like
this:

*** buffer overflow detected ***: ./perf terminated
======= Backtrace: =========
/lib64/libc.so.6(__fortify_fail+0x37)[0x382cefb2c7]
....

The tracepoints are separated by comma, something like this:

$ perf stat -a -e `perf list |grep Tracepoint|awk -F'[' '{gsub(/[[:space:]]+/,"",$1);array[FNR]=$1}END{outputs=array[1];for (i=2;i<=FNR;i++){ outputs=outputs "," array[i];};print outputs}'`

The root reason of this problem is that store_event_type() is called for all
events, and will overflow the 'filename' at:

    strncat(filename, orgname, strlen(orgname));

This patch fixes it by calling store_event_type() only when the event name has
been found.

LKML-Reference: <20110106093922.GB6713@hpt.nay.redhat.com>
Signed-off-by: Han Pingtian <phan@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Provides documentation for the following:
- the new power trace API,
- the old (legacy) power trace API,
- the DEPRECATED Kconfig option usage.
Signed-off-by: Jean Pihet <j-pihet@ti.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: trenn@suse.de
Cc: Len Brown <len.brown@intel.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: linux-pm@lists.linux-foundation.org
LKML-Reference: <1294253342-29056-3-git-send-email-j-pihet@ti.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Uses the machine_suspend trace point, called from the
generic kernel suspend_devices_and_enter function.
Signed-off-by: Jean Pihet <j-pihet@ti.com>
Acked-by: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Arjan van de Ven <arjan@linux.intel.com>
CC: Thomas Renninger <trenn@suse.de>
Cc: Len Brown <len.brown@intel.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: linux-pm@lists.linux-foundation.org
LKML-Reference: <1294253342-29056-2-git-send-email-j-pihet@ti.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Not accessed outside builtin-script, so make them static.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

That already does what was being done here. The warning is now unconditionally
given by __perf_session__process_pipe_events, just like for non pipe processing.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Just like we do at __perf_session__process_events

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

This patch fixes the usage of the perf_event.h header file
between command modules and the supporting code in util.

It is necessary to ensure that ALL files use the SAME
perf_event.h header from the kernel source tree.

There were a couple of #include <linux/perf_event.h> mixed
with #include "../../perf_event.h".

This caused issues on some distros because of mismatch
in the layout of struct perf_event_attr. That eventually
led perf stat to segfault.

Cc: David S. Miller <davem@davemloft.net>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Stephane Eranian <eranian@gmail.com>
LKML-Reference: <4d233cf0.2308e30a.7b00.ffffc187@mx.google.com>
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Rebooted my devel machine, first thing I ran was perf test, that expects
debugfs to be mounted, test fails. Be more clear about it.

Also add missing newlines and add more informative message when
sys_perf_event_open fails.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Prevent the long delay in io_check_error making NMI watchdog
timeout.
Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Don Zickus <dzickus@redhat.com>
LKML-Reference: <1294198689-15447-3-git-send-email-dzickus@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

The spin_lock_debug/rcu_cpu_stall detector uses
trigger_all_cpu_backtrace() to dump cpu backtrace.
Therefore it is possible that trigger_all_cpu_backtrace()
could be called at the same time on different CPUs, which
triggers and 'unknown reason NMI' warning. The following case
illustrates the problem:

      CPU1                    CPU2                     ...   CPU N
                       trigger_all_cpu_backtrace()
                       set "backtrace_mask" to cpu mask
                               |
generate NMI interrupts  generate NMI interrupts       ...
    \                          |                               /
     \                         |                              /

The "backtrace_mask" will be cleaned by the first NMI interrupt
at nmi_watchdog_tick(), then the following NMI interrupts
generated by other cpus's arch_trigger_all_cpu_backtrace() will
be taken as unknown reason NMI interrupts.

This patch uses a test_and_set to avoid the problem, and stop
the arch_trigger_all_cpu_backtrace() from calling to avoid
dumping a double cpu backtrace info when there is already a
trigger_all_cpu_backtrace() in progress.
Signed-off-by: Dongdong Deng <dongdong.deng@windriver.com>
Reviewed-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Cc: fweisbec@gmail.com
LKML-Reference: <1294198689-15447-2-git-send-email-dzickus@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Don Zickus <dzickus@redhat.com>

There are some paths that walk the die_chain with preemption on.
Make sure we are in an NMI call before we start doing anything.

This was triggered by do_general_protection calling notify_die
with DIE_GPF.
Reported-by: Jan Kiszka <jan.kiszka@web.de>
Signed-off-by: Don Zickus <dzickus@redhat.com>
LKML-Reference: <1294198689-15447-1-git-send-email-dzickus@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Merge reason: Add the final .37 tree.
Signed-off-by: Ingo Molnar <mingo@elte.hu>

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
  ipv4/route.c: respect prefsrc for local routes
  bridge: stp: ensure mac header is set
  bridge: fix br_multicast_ipv6_rcv for paged skbs
  atl1: fix oops when changing tx/rx ring params
  drivers/atm/atmtcp.c: add missing atm_dev_put
  starfire: Fix dma_addr_t size test for MIPS
  tg3: fix return value check in tg3_read_vpd()
  Broadcom CNIC core network driver: fix mem leak on allocation failures in cnic_alloc_uio_rings()
  ISDN, Gigaset: Fix memory leak in do_disconnect_req()
  CAN: Use inode instead of kernel address for /proc file
  skfp: testing the wrong variable in skfp_driver_init()
  ppp: allow disabling multilink protocol ID compression
  ehea: Avoid changing vlan flags
  ueagle-atm: fix PHY signal initialization race

The preferred source address is currently ignored for local routes,
which results in all local connections having a src address that is the
same as the local dst address. Fix this by respecting the preferred source
address when it is provided for local routes.

This bug can be demonstrated as follows:

 # ifconfig dummy0 192.168.0.1
 # ip route show table local | grep local.*dummy0
 local 192.168.0.1 dev dummy0  proto kernel  scope host  src 192.168.0.1
 # ip route change table local local 192.168.0.1 dev dummy0 \
     proto kernel scope host src 127.0.0.1
 # ip route show table local | grep local.*dummy0
 local 192.168.0.1 dev dummy0  proto kernel  scope host  src 127.0.0.1

We now establish a local connection and verify the source IP
address selection:

 # nc -l 192.168.0.1 3128 &
 # nc 192.168.0.1 3128 &
 # netstat -ant | grep 192.168.0.1:3128.*EST
 tcp        0      0 192.168.0.1:3128        192.168.0.1:33228 ESTABLISHED
 tcp        0      0 192.168.0.1:33228       192.168.0.1:3128  ESTABLISHED
Signed-off-by: Joel Sing <jsing@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The ->trim_fs has been removed meanwhile, so remove it from the documentation
as well.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reported-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

builtin-timechart must only pass -e power:xy events if they are supported by
the running kernel, otherwise try to fetch the old power:power{start,end}
events.

For this I added the tiny helper function:

   int is_valid_tracepoint(const char *event_string)

to parse-events.[hc], which could be more generic as an interface and support
hardware/software/... events, not only tracepoints, but someone else could
extend that if needed...
Signed-off-by: Thomas Renninger <trenn@suse.de>
Acked-by: Arjan van de Ven <arjan@linux.intel.com>
Acked-by: Jean Pihet <j-pihet@ti.com>
LKML-Reference: <1294073445-14812-4-git-send-email-trenn@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Add these new power trace events:

 power:cpu_idle
 power:cpu_frequency
 power:machine_suspend

The old C-state/idle accounting events:
  power:power_start
  power:power_end

Have now a replacement (but we are still keeping the old
tracepoints for compatibility):

  power:cpu_idle

and
  power:power_frequency

is replaced with:
  power:cpu_frequency

power:machine_suspend is newly introduced.

Jean Pihet has a patch integrated into the generic layer
(kernel/power/suspend.c) which will make use of it.

the type= field got removed from both, it was never
used and the type is differed by the event type itself.

perf timechart userspace tool gets adjusted in a separate patch.
Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Arjan van de Ven <arjan@linux.intel.com>
Acked-by: Jean Pihet <jean.pihet@newoldbits.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: rjw@sisk.pl
LKML-Reference: <1294073445-14812-3-git-send-email-trenn@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
LKML-Reference: <1290072314-31155-2-git-send-email-trenn@suse.de>

power_frequency moved to drivers/cpufreq/cpufreq.c which has
to be compiled in, no need to export it.

intel_idle can a be module though...
Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Jean Pihet <jean.pihet@newoldbits.com>
Cc: Jean Pihet <j-pihet@ti.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: rjw@sisk.pl
LKML-Reference: <1294073445-14812-2-git-send-email-trenn@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
LKML-Reference: <1290072314-31155-2-git-send-email-trenn@suse.de>

Merge branch 'perf/test' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux-2.6 into perf/core

Merge reason: pick up latest -rc.
Signed-off-by: Ingo Molnar <mingo@elte.hu>

To test the use of the perf_evsel class on something other than
the tools from where we refactored code to create it.

It calls open() N times and then checks if the event created to
monitor it returns N events.

[acme@felicio linux]$ perf test
 1: vmlinux symtab matches kallsyms: Ok
 2: detect open syscall event: Ok
[acme@felicio linux]$

It does.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Han Pingtian <phan@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

While writing the first user of the routines created from the ad-hoc
routines in the existing builtins I noticed that the resulting set of
calls was too long, reduce it by doing some best effort allocations.

Tools that need to operate on multiple threads and cpus should pre-allocate
enough resources by explicitely calling the perf_evsel__alloc_{fd,counters}
methods.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

So that later, we can pass the thread_map instance instead of
(thread_num, thread_map) for things like perf_evsel__open and friends,
just like was done with cpu_map.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

So that later, we can pass the cpu_map instance instead of (nr_cpus, cpu_map)
for things like perf_evsel__open and friends.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Abstracting away the loops needed to create the various event fd handlers.

The users have to pass a confiruged perf->evsel.attr field, which is already
usable after perf_evsel__new (constructor) time, using defaults.

Comes out of the ad-hoc routines in builtin-stat, that now uses it.

Fixed a small silly bug where we were die()ing before killing our
children, dysfunctional family this one 8-)

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Making them hopefully generic enough to be used in 'perf test',
well see.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

* master.kernel.org:/home/rmk/linux-2.6-arm:
  ARM: pxa: fix page table corruption on resume
  ARM: it8152: add IT8152_LAST_IRQ definition to fix build error
  ARM: pxa: PXA_ESERIES depends on FB_W100.
  ARM: 6605/1: Add missing include "asm/memory.h"
  ARM: 6540/1: Stop irqsoff trace on return to user
  ARM: 6537/1: update Nomadik, U300 and Ux500 maintainers
  ARM: 6536/1: Add missing SZ_{32,64,128}
  ARM: fix cache-feroceon-l2 after stack based kmap_atomic()
  ARM: fix cache-xsc3l2 after stack based kmap_atomic()
  ARM: get rid of kmap_high_l1_vipt()
  ARM: smp: avoid incrementing mm_users on CPU startup
  ARM: pxa: PXA_ESERIES depends on FB_W100.

Addresses https://bugzilla.kernel.org/show_bug.cgi?id=25702Reported-by: Martin Ettl <ettl.martin@gmx.de>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

If security_filter_rule_init() doesn't return a rule, then not everything
is as fine as the return code implies.

This bug only occurs when the LSM (eg. SELinux) is disabled at runtime.

Adding an empty LSM rule causes ima_match_rules() to always succeed,
ignoring any remaining rules.

 default IMA TCB policy:
  # PROC_SUPER_MAGIC
  dont_measure fsmagic=0x9fa0
  # SYSFS_MAGIC
  dont_measure fsmagic=0x62656572
  # DEBUGFS_MAGIC
  dont_measure fsmagic=0x64626720
  # TMPFS_MAGIC
  dont_measure fsmagic=0x01021994
  # SECURITYFS_MAGIC
  dont_measure fsmagic=0x73636673

  < LSM specific rule >
  dont_measure obj_type=var_log_t

  measure func=BPRM_CHECK
  measure func=FILE_MMAP mask=MAY_EXEC
  measure func=FILE_CHECK mask=MAY_READ uid=0

Thus without the patch, with the boot parameters 'tcb selinux=0', adding
the above 'dont_measure obj_type=var_log_t' rule to the default IMA TCB
measurement policy, would result in nothing being measured.  The patch
prevents the default TCB policy from being replaced.
Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
Cc: James Morris <jmorris@namei.org>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Cc: David Safford <safford@watson.ibm.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

commit bf9ae538
(llc: use dev_hard_header) removed the
skb_reset_mac_header call from llc_mac_hdr_init.

This seems fine itself, but br_send_bpdu() invokes ebtables LOCAL_OUT.

We oops in ebt_basic_match() because it assumes eth_hdr(skb) returns
a meaningful result.

Cc: acme@ghostprotocols.net
References: https://bugzilla.kernel.org/show_bug.cgi?id=24532Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>