- 11 Nov, 2022 22 commits
-
-
Steen Hegelund authored
Use a tc matchall rule with a goto action to the VCAP specific chain to enable the VCAP lookups. If the matchall rule is removed the VCAP lookups will be disabled again using its cookie as lookup to find the VCAP instance. To enable the Sparx5 IS2 VCAP on eth0 you would use this command: tc filter add dev eth0 ingress prio 5 handle 5 matchall \ skip_sw action goto chain 8000000 as the first lookup in IS2 has chain id 8000000 Signed-off-by:Steen Hegelund <steen.hegelund@microchip.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Steen Hegelund authored
Add support for validating keyfields and actionfields when they are added to a VCAP rule. We need to ensure that the field is not already present and that the field is in the key- or actionset, if the client has added a key- or actionset to the rule at this point. Signed-off-by:
-
Steen Hegelund authored
This tries to match the keys in a rule with the keysets supported by the VCAP instance, and generate a list of keysets. This list is then validated against the list of keysets that is currently selected for the lookups (per port) in the VCAP configuration. The Sparx5 IS2 only has one actionset, so there is no actionset matching performed for now. Signed-off-by:
-
Steen Hegelund authored
Add support for a goto action and ensure that a HW offloaded TC flower filter has a valid goto action and that pass and trap actions are not both used in the same filter. Signed-off-by:
-
Steen Hegelund authored
Add a helper function that finds the lookup index in a VCAP instance from the chain id. Signed-off-by:
-
Steen Hegelund authored
This adds the following TC flower filter keys to Sparx5 for IS2: - ipv4_addr (sip and dip) - ipv6_addr (sip and dip) - control (IPv4 fragments) - portnum (tcp and udp port numbers) - basic (L3 and L4 protocol) - vlan (outer vlan tag info) - tcp (tcp flags) - ip (tos field) as well as an 128 bit keyfield interface on the VCAP API to set the IPv6 addresses. IS2 supports the classified VLAN information which amounts to the outer VLAN info in case of multiple tags. Here are some examples of the tc flower filter operations that are now supported for the IS2 VCAP: - IPv4 Addresses tc filter add dev eth12 ingress chain 8000000 prio 12 handle 12 \ protocol ip flower skip_sw dst_ip 1.0.1.1 src_ip 2.0.2.2 \ action trap action goto chain 81000000 - IPv6 Addresses tc filter add dev eth12 ingress chain 8000000 prio 13 handle 13 \ protocol ipv6 flower skip_sw dst_ip 1::1:1 src_ip 2::2:2 \ action trap action goto chain 81000000 - IPv4 fragments tc filter add dev eth12 ingress chain 8000000 prio 14 handle 14 \ protocol ip flower skip_sw dst_ip 3.0.3.3 src_ip 2.0.2.2 \ ip_flags frag/nofirstfrag action trap action goto chain 81000000 - TCP and UDP portnumbers tc filter add dev eth12 ingress chain 8000000 prio 21 handle 21 \ protocol ip flower skip_sw dst_ip 8.8.8.8 src_ip 2.0.2.2 \ ip_proto tcp dst_port 100 src_port 12000 action trap action goto chain 81000000 tc filter add dev eth12 ingress chain 8000000 prio 23 handle 23 \ protocol ipv6 flower skip_sw dst_ip 5::5:5 src_ip 2::2:2 \ ip_proto tcp dst_port 300 src_port 13000 action trap action goto chain 81000000 - Layer 3 and Layer 4 protocol info tc filter add dev eth12 ingress chain 8000000 prio 28 handle 28 \ protocol ipv4 flower skip_sw dst_ip 9.0.9.9 src_ip 2.0.2.2 \ ip_proto icmp action trap action goto chain 81000000 - VLAN tag info (outer tag) tc filter add dev eth12 ingress chain 8000000 prio 29 handle 29 \ protocol 802.1q flower skip_sw vlan_id 600 vlan_prio 6 \ vlan_ethtype ipv4 action trap action goto chain 81000000 tc filter add dev eth12 ingress chain 8000000 prio 31 handle 31 \ protocol 802.1q flower skip_sw vlan_id 600 vlan_prio 5 \ vlan_ethtype ipv6 action trap action goto chain 81000000 - TCP flags tc filter add dev eth12 ingress chain 8000000 prio 15 handle 15 \ protocol ip flower skip_sw dst_ip 4.0.4.4 src_ip 2.0.2.2 \ ip_proto tcp tcp_flags 0x2a/0x3f action trap action goto chain 81000000 - IP info (IPv4 TOS field) tc filter add dev eth12 ingress chain 8000000 prio 16 handle 16 \ protocol ip flower skip_sw ip_tos 0x35 dst_ip 5.0.5.5 \ src_ip 2.0.2.2 action trap action goto chain 81000000 Notes: - The "protocol all" selection is not supported yet. - The MAC address rule now needs to use non-ip and non "protocol all". Here is an example: tc filter add dev eth12 ingress chain 8000000 prio 10 handle 10 \ protocol 0xbeef flower skip_sw \ dst_mac 0a:0b:0c:0d:0e:0f \ src_mac 2:0:0:0:0:1 \ action trap action goto chain 81000000 - The VLAN rules use classified VLAN information, and to get the classification information into the frame metadata, the ingress port need to be added to a bridge with the VID and vlan filtering enabled, like this (using VID 600 and four ports eth12, eth13, eth14 and eth15): ip link add name br5 type bridge ip link set dev br5 up ip link set eth12 master br5 ip link set eth13 master br5 ip link set eth14 master br5 ip link set eth15 master br5 sysctl -w net.ipv6.conf.eth12.disable_ipv6=1 sysctl -w net.ipv6.conf.eth13.disable_ipv6=1 sysctl -w net.ipv6.conf.eth14.disable_ipv6=1 sysctl -w net.ipv6.conf.eth15.disable_ipv6=1 sysctl -w net.ipv6.conf.br5.disable_ipv6=1 ip link set dev br5 type bridge vlan_filtering 1 bridge vlan add dev eth12 vid 600 bridge vlan add dev eth13 vid 600 bridge vlan add dev eth14 vid 600 bridge vlan add dev eth15 vid 600 bridge vlan add dev br5 vid 600 self Signed-off-by:Casper Andersson <casper.casan@gmail.com> Signed-off-by:
-
Steen Hegelund authored
This changes the port keyset configuration for Sparx5 IS2 so that - IPv4 generates a IP4_TCP_UDP keyset for IPv4 TCP/UDP frames and a IP4_OTHER keyset for other IPv4 frames (both UC and MC) - IPv6 generates a IP_7TUPLE keyset (both UC and MC) ARP and non-IP traffic continues to generate the MAC_ETYPE keyset Signed-off-by:
-
David S. Miller authored
Lorenzo Bianconi says: ==================== introduce WED RX support to MT7986 SoC Similar to TX counterpart available on MT7622 and MT7986, introduce RX Wireless Ethernet Dispatch available on MT7986 SoC in order to offload traffic received by wlan nic to the wired interfaces (lan/wan). Changes since v3: - remove reset property in ethsys dts node - rely on readx_poll_timeout in wo mcu code - fix typos - move wo-ccif binding in soc folder - use reserved-memory for wo-dlm - improve wo-ccif binding Changes since v2: - rely on of_reserved_mem APIs in mcu code - add some dts fixes - rename {tx,rx}_wdma in {rx,tx}_wdma - update entry in maintainers file Changes since v1: - fix sparse warnings - rely on memory-region property in mt7622-wed.yaml - some more binding fixes ==================== Signed-off-by: -
Lorenzo Bianconi authored
Update MEDIATEK ETHERNET driver maintainer file enty adding myself to maintainers list Acked-by:
Felix Fietkau <nbd@nbd.name> Acked-by:
Sean Wang <sean.wang@mediatek.com> Signed-off-by:
Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by:
-
Lorenzo Bianconi authored
Introduce WED RX MIB counters support available on MT7986a SoC. Tested-by:
Daniel Golle <daniel@makrotopia.org> Co-developed-by:
Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by:
-
Lorenzo Bianconi authored
Enable RX Wireless Ethernet Dispatch available on MT7986 Soc. Tested-by:
-
Lorenzo Bianconi authored
Rename tx_wdma queue array in rx_wdma since this is rx side of wdma soc. Moreover rename mtk_wed_wdma_ring_setup routine in mtk_wed_wdma_rx_ring_setup() Signed-off-by:
-
Lorenzo Bianconi authored
Introduce WO chip support to mtk wed driver. MTK WED WO is used to implement RX Wireless Ethernet Dispatch and offload traffic received by wlan nic to the wired interface. Tested-by:
-
Sujuan Chen authored
Introduce WED mcu support used to configure WED WO chip. This is a preliminary patch in order to add RX Wireless Ethernet Dispatch available on MT7986 SoC. Tested-by:
-
Lorenzo Bianconi authored
Document the binding for the RX Wireless Ethernet Dispatch core on the MT7986 ethernet driver used to offload traffic received by WLAN NIC and forwarded to LAN/WAN one. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Lorenzo Bianconi authored
Similar to TX Wireless Ethernet Dispatch, introduce RX Wireless Ethernet Dispatch to offload traffic received by the wlan interface to lan/wan one. Co-developed-by:
-
Cai Huoqing authored
HINIC is marked orphan for 14 months from the commit "5cfe5109", but there are lots of HINIC in use. I have a SP582 NIC (hi1822 inside which is a kind of HINIC SOC), and implement based on hinic driver, and if there are some patches for HINIC, I can test and do some code review. I'm active in linux contribution, if possible, I want to take the hinic maintainership. Add my email here to receive patches. Signed-off-by:
Cai Huoqing <cai.huoqing@linux.dev> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski authored
drivers/net/can/pch_can.c ae64438b ("can: dev: fix skb drop check") 1dd1b521 ("can: remove obsolete PCH CAN driver") https://lore.kernel.org/all/20221110102509.1f7d63cc@canb.auug.org.au/Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Jakub Kicinski: "Including fixes from netfilter, wifi, can and bpf. Current release - new code bugs: - can: af_can: can_exit(): add missing dev_remove_pack() of canxl_packet Previous releases - regressions: - bpf, sockmap: fix the sk->sk_forward_alloc warning - wifi: mac80211: fix general-protection-fault in ieee80211_subif_start_xmit() - can: af_can: fix NULL pointer dereference in can_rx_register() - can: dev: fix skb drop check, avoid o-o-b access - nfnetlink: fix potential dead lock in nfnetlink_rcv_msg() Previous releases - always broken: - bpf: fix wrong reg type conversion in release_reference() - gso: fix panic on frag_list with mixed head alloc types - wifi: brcmfmac: fix buffer overflow in brcmf_fweh_event_worker() - wifi: mac80211: set TWT Information Frame Disabled bit as 1 - eth: macsec offload related fixes, make sure to clear the keys from memory - tun: fix memory leaks in the use of napi_get_frags - tun: call napi_schedule_prep() to ensure we own a napi - tcp: prohibit TCP_REPAIR_OPTIONS if data was already sent - ipv6: addrlabel: fix infoleak when sending struct ifaddrlblmsg to network - tipc: fix a msg->req tlv length check - sctp: clear out_curr if all frag chunks of current msg are pruned, avoid list corruption - mctp: fix an error handling path in mctp_init(), avoid leaks" * tag 'net-6.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (101 commits) eth: sp7021: drop free_netdev() from spl2sw_init_netdev() MAINTAINERS: Move Vivien to CREDITS net: macvlan: fix memory leaks of macvlan_common_newlink ethernet: tundra: free irq when alloc ring failed in tsi108_open() net: mv643xx_eth: disable napi when init rxq or txq failed in mv643xx_eth_open() ethernet: s2io: disable napi when start nic failed in s2io_card_up() net: atlantic: macsec: clear encryption keys from the stack net: phy: mscc: macsec: clear encryption keys when freeing a flow stmmac: dwmac-loongson: fix missing of_node_put() while module exiting stmmac: dwmac-loongson: fix missing pci_disable_device() in loongson_dwmac_probe() stmmac: dwmac-loongson: fix missing pci_disable_msi() while module exiting cxgb4vf: shut down the adapter when t4vf_update_port_info() failed in cxgb4vf_open() mctp: Fix an error handling path in mctp_init() stmmac: intel: Update PCH PTP clock rate from 200MHz to 204.8MHz net: cxgb3_main: disable napi when bind qsets failed in cxgb_up() net: cpsw: disable napi in cpsw_ndo_open() iavf: Fix VF driver counting VLAN 0 filters ice: Fix spurious interrupt during removal of trusted VF net/mlx5e: TC, Fix slab-out-of-bounds in parse_tc_actions net/mlx5e: E-Switch, Fix comparing termination table instance ... -
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxJakub Kicinski authored
Saeed Mahameed says: ==================== mlx5 fixes 2022-11-02 This series provides bug fixes to mlx5 driver. * tag 'mlx5-fixes-2022-11-09' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux: net/mlx5e: TC, Fix slab-out-of-bounds in parse_tc_actions net/mlx5e: E-Switch, Fix comparing termination table instance net/mlx5e: TC, Fix wrong rejection of packet-per-second policing net/mlx5e: Fix tc acts array not to be dependent on enum order net/mlx5e: Fix usage of DMA sync API net/mlx5e: Add missing sanity checks for max TX WQE size net/mlx5: fw_reset: Don't try to load device in case PCI isn't working net/mlx5: E-switch, Set to legacy mode if failed to change switchdev mode net/mlx5: Allow async trigger completion execution on single CPU systems net/mlx5: Bridge, verify LAG state when adding bond to bridge ==================== Link: https://lore.kernel.org/r/20221109184050.108379-1-saeed@kernel.orgSigned-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queueJakub Kicinski authored
Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2022-11-09 (ice, iavf) This series contains updates to ice and iavf drivers. Norbert stops disabling VF queues that are not enabled for ice driver. Michal stops accounting of VLAN 0 filter to match expectations of PF driver for iavf. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: iavf: Fix VF driver counting VLAN 0 filters ice: Fix spurious interrupt during removal of trusted VF ==================== Link: https://lore.kernel.org/r/20221110003744.201414-1-anthony.l.nguyen@intel.comSigned-off-by:
-
Wei Yongjun authored
It's not necessary to free netdev allocated with devm_alloc_etherdev() and using free_netdev() leads to double free. Fixes: fd3040b9 ("net: ethernet: Add driver for Sunplus SP7021") Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Link: https://lore.kernel.org/r/20221109150116.2988194-1-weiyongjun@huaweicloud.comSigned-off-by:
-
- 10 Nov, 2022 18 commits
-
-
Florian Fainelli authored
Last patch from Vivien was nearly 3 years ago and he has not reviewed or responded to DSA patches since then, move to CREDITS. Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20221109231907.621678-1-f.fainelli@gmail.comSigned-off-by:
-
Jakub Kicinski authored
Jonathan reports crashes when running net-next in Meta's fleet. Stats collection uses ethtool -I which does a per-op policy dump to check if stats are supported. We don't initialize the dumpit information if doit succeeds due to evaluation short-circuiting. The crash may look like this: BUG: kernel NULL pointer dereference, address: 0000000000000cc0 RIP: 0010:netlink_policy_dump_add_policy+0x174/0x2a0 ctrl_dumppolicy_start+0x19f/0x2f0 genl_start+0xe7/0x140 Or we may trigger a warning: WARNING: CPU: 1 PID: 785 at net/netlink/policy.c:87 netlink_policy_dump_get_policy_idx+0x79/0x80 RIP: 0010:netlink_policy_dump_get_policy_idx+0x79/0x80 ctrl_dumppolicy_put_op+0x214/0x360 depending on what garbage we pick up from the stack. Reported-by:Jonathan Lemon <bsd@meta.com> Fixes: 26588edb ("genetlink: support split policies in ctrl_dumppolicy_put_op()") Reviewed-by:
Jacob Keller <jacob.e.keller@intel.com> Tested-by:
Leon Romanovsky <leonro@nvidia.com> Link: https://lore.kernel.org/r/20221109183254.554051-1-kuba@kernel.orgSigned-off-by:
-
Ido Schimmel authored
When a devlink port is unregistered, its type is expected to be unset or otherwise a WARNING is generated [1]. This was supposed to be handled by cited commit by clearing the type upon 'NETDEV_PRE_UNINIT'. The assumption was that no other events can be generated for the netdev after this event, but this proved to be wrong. After the event is generated, netdev_wait_allrefs_any() will rebroadcast a 'NETDEV_UNREGISTER' until the netdev's reference count drops to 1. This causes devlink to set the port type back to Ethernet. Fix by only setting and clearing the port type upon 'NETDEV_POST_INIT' and 'NETDEV_PRE_UNINIT', respectively. For all other events, preserve the port type. [1] WARNING: CPU: 0 PID: 11 at net/core/devlink.c:9998 devl_port_unregister+0x2f6/0x390 net/core/devlink.c:9998 Modules linked in: CPU: 1 PID: 11 Comm: kworker/u4:1 Not tainted 6.1.0-rc3-next-20221107-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022 Workqueue: netns cleanup_net RIP: 0010:devl_port_unregister+0x2f6/0x390 net/core/devlink.c:9998 [...] Call Trace: <TASK> __nsim_dev_port_del+0x1bb/0x240 drivers/net/netdevsim/dev.c:1433 nsim_dev_port_del_all drivers/net/netdevsim/dev.c:1443 [inline] nsim_dev_reload_destroy+0x171/0x510 drivers/net/netdevsim/dev.c:1660 nsim_dev_reload_down+0x6b/0xd0 drivers/net/netdevsim/dev.c:968 devlink_reload+0x1c2/0x6b0 net/core/devlink.c:4501 devlink_pernet_pre_exit+0x104/0x1c0 net/core/devlink.c:12609 ops_pre_exit_list net/core/net_namespace.c:159 [inline] cleanup_net+0x451/0xb10 net/core/net_namespace.c:594 process_one_work+0x9bf/0x1710 kernel/workqueue.c:2289 worker_thread+0x665/0x1080 kernel/workqueue.c:2436 kthread+0x2e4/0x3a0 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:308 </TASK> Fixes: 02a68a47 ("net: devlink: track netdev with devlink_port assigned") Reported-by: syzbot+85e47e1a08b3e159b159@syzkaller.appspotmail.com Reported-by: syzbot+c2ca18f0fccdd1f09c66@syzkaller.appspotmail.com Reviewed-by:
Jiri Pirko <jiri@nvidia.com> Signed-off-by:
Ido Schimmel <idosch@nvidia.com> Link: https://lore.kernel.org/r/20221110085150.520800-1-idosch@nvidia.comSigned-off-by:
-
https://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaJakub Kicinski authored
Long Li says: ==================== Introduce Microsoft Azure Network Adapter (MANA) RDMA driver [netdev prep] The first 11 patches which modify the MANA Ethernet driver to support RDMA driver. * 'mana-shared-6.2' of https://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: net: mana: Define data structures for protection domain and memory registration net: mana: Define data structures for allocating doorbell page from GDMA net: mana: Define and process GDMA response code GDMA_STATUS_MORE_ENTRIES net: mana: Define max values for SGL entries net: mana: Move header files to a common location net: mana: Record port number in netdev net: mana: Export Work Queue functions for use by RDMA driver net: mana: Set the DMA device max segment size net: mana: Handle vport sharing between devices net: mana: Record the physical address for doorbell page region net: mana: Add support for auxiliary device ==================== Link: https://lore.kernel.org/all/1667502990-2559-1-git-send-email-longli@linuxonhyperv.com/Signed-off-by:
-
Vincent Mailhol authored
If ethtool_ops::get_drvinfo() callback isn't set, ethtool_get_drvinfo() will fill the ethtool_drvinfo::name and ethtool_drvinfo::bus_info fields. However, if the driver provides the callback function, those two fields are not touched. This means that the driver has to fill these itself. Allow the driver to leave those two fields empty and populate them in such case. This way, the driver can rely on the default values for the name and the bus_info. If the driver provides values, do nothing. Signed-off-by:
Vincent Mailhol <mailhol.vincent@wanadoo.fr> Link: https://lore.kernel.org/r/20221108035754.2143-1-mailhol.vincent@wanadoo.frSigned-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linuxLinus Torvalds authored
Pull btrfs fixes from David Sterba: - revert memory optimization for scrub blocks, this misses errors in 2nd and following blocks - add exception for ENOMEM as reason for transaction abort to not print stack trace, syzbot has reported many - zoned fixes: - fix locking imbalance during scrub - initialize zones for seeding device - initialize zones for cloned device structures - when looking up device, change assertion to a real check as some of the search parameters can be passed by ioctl, reported by syzbot - fix error pointer check in self tests * tag 'for-6.1-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: zoned: fix locking imbalance on scrub btrfs: zoned: initialize device's zone info for seeding btrfs: zoned: clone zoned device info when cloning a device Revert "btrfs: scrub: use larger block size for data extent scrub" btrfs: don't print stack trace when transaction is aborted due to ENOMEM btrfs: selftests: fix wrong error check in btrfs_free_dummy_root() btrfs: fix match incorrectly in dev_args_match_device -
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwireLinus Torvalds authored
Pull soundwire fixes from Vinod Koul: "Two qcom driver fixes for broadcast completion reinit and check for outanding writes. And a lone Intel driver fix for clock stop timeout" * tag 'soundwire-6.1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire: soundwire: qcom: check for outanding writes before doing a read soundwire: qcom: reinit broadcast completion soundwire: intel: Initialize clock stop timeout
-
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phyLinus Torvalds authored
Pull phy fixes from Vinod Koul: "A bunch of odd driver fixes and a MAINTAINER email update: - Update Kishon's email - stms32 error code fix in driver probe - tegra: fix for checking valid pointer - qcom_qmp: null deref fix - sunplus: error check fix - ralink: add missing sentinel to table" * tag 'phy-fixes-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: phy: ralink: mt7621-pci: add sentinel to quirks table phy: sunplus: Fix an IS_ERR() vs NULL bug in sp_usb_phy_probe phy: qcom-qmp-combo: fix NULL-deref on runtime resume phy: tegra: xusb: Fix crash during pad power on/down phy: stm32: fix an error code in probe MAINTAINERS: Update Kishon's email address in GENERIC PHY FRAMEWORK
-
git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linuxLinus Torvalds authored
Pull hwspinlock updates from Bjorn Andersson: "I apparently had missed tagging and sending this set of changes out during the 6.1 merge window. But did get the associated dts changes depending on this merged. The result is a regression in 6.1-rc on the affected, older, Qualcomm platforms - in for form of them not booting. So while these weren't regression fixes originally, they are now. It's not introducing new beahavior, but simply extending the existing new Devicetree model, to cover remaining platforms: - extend the DeviceTree binding and implementation for the Qualcomm hardware spinlock on some older platforms to follow the style of the newer ones where the DeviceTree representation does not rely on an intermediate syscon node" * tag 'hwlock-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: dt-bindings: hwlock: qcom-hwspinlock: add syscon to MSM8974 hwspinlock: qcom: add support for MMIO on older SoCs hwspinlock: qcom: correct MMIO max register for newer SoCs dt-bindings: hwlock: qcom-hwspinlock: correct example indentation dt-bindings: hwlock: qcom-hwspinlock: add support for MMIO on older SoCs -
Chuang Wang authored
kmemleak reports memory leaks in macvlan_common_newlink, as follows: ip link add link eth0 name .. type macvlan mode source macaddr add <MAC-ADDR> kmemleak reports: unreferenced object 0xffff8880109bb140 (size 64): comm "ip", pid 284, jiffies 4294986150 (age 430.108s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 b8 aa 5a 12 80 88 ff ff ..........Z..... 80 1b fa 0d 80 88 ff ff 1e ff ac af c7 c1 6b 6b ..............kk backtrace: [<ffffffff813e06a7>] kmem_cache_alloc_trace+0x1c7/0x300 [<ffffffff81b66025>] macvlan_hash_add_source+0x45/0xc0 [<ffffffff81b66a67>] macvlan_changelink_sources+0xd7/0x170 [<ffffffff81b6775c>] macvlan_common_newlink+0x38c/0x5a0 [<ffffffff81b6797e>] macvlan_newlink+0xe/0x20 [<ffffffff81d97f8f>] __rtnl_newlink+0x7af/0xa50 [<ffffffff81d98278>] rtnl_newlink+0x48/0x70 ... In the scenario where the macvlan mode is configured as 'source', macvlan_changelink_sources() will be execured to reconfigure list of remote source mac addresses, at the same time, if register_netdevice() return an error, the resource generated by macvlan_changelink_sources() is not cleaned up. Using this patch, in the case of an error, it will execute macvlan_flush_sources() to ensure that the resource is cleaned up. Fixes: aa5fd0fb ("driver: macvlan: Destroy new macvlan port if macvlan_common_newlink failed.") Signed-off-by:Chuang Wang <nashuiliang@gmail.com> Link: https://lore.kernel.org/r/20221109090735.690500-1-nashuiliang@gmail.comSigned-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Zhengchao Shao authored
When alloc tx/rx ring failed in tsi108_open(), it doesn't free irq. Fix it. Fixes: 5e123b84 ("[PATCH] Add tsi108/9 On Chip Ethernet device driver support") Signed-off-by:
Zhengchao Shao <shaozhengchao@huawei.com> Link: https://lore.kernel.org/r/20221109044016.126866-1-shaozhengchao@huawei.comSigned-off-by:
-
Zhengchao Shao authored
When failed to init rxq or txq in mv643xx_eth_open() for opening device, napi isn't disabled. When open mv643xx_eth device next time, it will trigger a BUG_ON() in napi_enable(). Compile tested only. Fixes: 2257e05c ("mv643xx_eth: get rid of receive-side locking") Signed-off-by:
-
Zhengchao Shao authored
When failed to start nic or add interrupt service routine in s2io_card_up() for opening device, napi isn't disabled. When open s2io device next time, it will trigger a BUG_ON()in napi_enable(). Compile tested only. Fixes: 5f490c96 ("S2io: Fixed synchronization between scheduling of napi with card reset and close") Signed-off-by:
-
Nathan Huckleberry authored
The ndo_start_xmit field in net_device_ops is expected to be of type netdev_tx_t (*ndo_start_xmit)(struct sk_buff *skb, struct net_device *dev). The mismatched return type breaks forward edge kCFI since the underlying function definition does not match the function hook definition. A new warning in clang will catch this at compile time: drivers/net/ethernet/microsoft/mana/mana_en.c:382:21: error: incompatible function pointer types initializing 'netdev_tx_t (*)(struct sk_buff *, struct net_device *)' (aka 'enum netdev_tx (*)(struct sk_buff *, struct net_device *)') with an expression of type 'int (struct sk_buff *, struct net_device *)' [-Werror,-Wincompatible-function-pointer-types-strict] .ndo_start_xmit = mana_start_xmit, ^~~~~~~~~~~~~~~ 1 error generated. The return type of mana_start_xmit should be changed from int to netdev_tx_t. Reported-by:Dan Carpenter <error27@gmail.com> Link: https://github.com/ClangBuiltLinux/linux/issues/1703 Link: https://github.com/ClangBuiltLinux/linux/issues/1750Signed-off-by:
Nathan Huckleberry <nhuck@google.com> Reviewed-by:
Dexuan Cui <decui@microsoft.com> [nathan: Rebase on net-next and resolve conflicts Add note about new clang warning] Signed-off-by:
Nathan Chancellor <nathan@kernel.org> Link: https://lore.kernel.org/r/20221109002629.1446680-1-nathan@kernel.orgSigned-off-by:
-
Paolo Abeni authored
Antoine Tenart says: ==================== macsec: clear encryption keys in h/w drivers Commit aaab73f8 ("macsec: clear encryption keys from the stack after setting up offload") made sure to clean encryption keys from the stack after setting up offloading but some h/w drivers did a copy of the key which need to be zeroed as well. The MSCC PHY driver can actually be converted not to copy the encryption key at all, but such patch would be quite difficult to backport. I'll send a following up patch doing this in net-next once this series lands. Tested on the MSCC PHY but not on the atlantic NIC. ==================== Link: https://lore.kernel.org/r/20221108153459.811293-1-atenart@kernel.orgSigned-off-by:
-
Antoine Tenart authored
Commit aaab73f8 ("macsec: clear encryption keys from the stack after setting up offload") made sure to clean encryption keys from the stack after setting up offloading, but the atlantic driver made a copy and did not clear it. Fix this. [4 Fixes tags below, all part of the same series, no need to split this] Fixes: 9ff40a75 ("net: atlantic: MACSec ingress offload implementation") Fixes: b8f8a0b7 ("net: atlantic: MACSec ingress offload HW bindings") Fixes: 27736563 ("net: atlantic: MACSec egress offload implementation") Fixes: 9d106c6d ("net: atlantic: MACSec egress offload HW bindings") Signed-off-by:
Antoine Tenart <atenart@kernel.org> Signed-off-by:
-
Antoine Tenart authored
Commit aaab73f8 ("macsec: clear encryption keys from the stack after setting up offload") made sure to clean encryption keys from the stack after setting up offloading, but the MSCC PHY driver made a copy, kept it in the flow data and did not clear it when freeing a flow. Fix this. Fixes: 28c5107a ("net: phy: mscc: macsec support") Signed-off-by:
-
Richard Gobert authored
After searching for a protocol handler in dev_gro_receive, checking for failure is redundant. Skip the failure code after finding the corresponding handler. Suggested-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
Richard Gobert <richardbgobert@gmail.com> Reviewed-by:
-
